이 단계에서는 Apigee Hybrid 작동에 필요한 TLS 사용자 인증 정보를 만드는 방법을 설명합니다.
TLS 인증서 만들기
Apigee Hybrid 구성에 런타임 인그레스 게이트웨이에 대한 TLS 인증서를 제공해야 합니다. 이 빠른 시작(비프로덕션 무료 체험판 설치)에서 런타임 게이트웨이는 자체 서명 사용자 인증 정보를 수락할 수 있습니다. 다음의 절차에서 openssl은 자체 서명 사용자 인증 정보를 생성하는 데 사용됩니다.
이 단계에서는 TLS 사용자 인증 정보 파일을 만들어 base_directory/hybrid-files/certs 디렉터리에 추가합니다.
7단계: 하이브리드 런타임 구성에서는 클러스터 구성 파일에 대해 파일 경로를 추가합니다.
프로젝트 디렉터리 구조 설정에서 구성한 base_directory/hybrid-files 디렉터리에 있는지 확인합니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-09(UTC)"],[[["\u003cp\u003eThis guide provides instructions for creating TLS credentials, which are essential for the operation of Apigee hybrid.\u003c/p\u003e\n"],["\u003cp\u003eFor non-production trial installations, self-signed certificates can be used, and the guide demonstrates generating them using \u003ccode\u003eopenssl\u003c/code\u003e.\u003c/p\u003e\n"],["\u003cp\u003eIn a production environment, signed certificates are required, and they can be obtained either as a certificate and key pair or through a Kubernetes secret, such as using Let's Encrypt as the CA.\u003c/p\u003e\n"],["\u003cp\u003eThe generated TLS certificate (\u003ccode\u003ekeystore.pem\u003c/code\u003e) and key (\u003ccode\u003ekeystore.key\u003c/code\u003e) files must be saved in the \u003ccode\u003e<var translate="no">base_directory</var>``/hybrid-files/certs\u003c/code\u003e directory.\u003c/p\u003e\n"],["\u003cp\u003eThe domain name saved in the \u003cstrong\u003e\u003ccode\u003eDOMAIN\u003c/code\u003e\u003c/strong\u003e environment variable during this process must be the same as the one used for the environment group created in a previous step.\u003c/p\u003e\n"]]],[],null,["| You are currently viewing version 1.6 of the Apigee hybrid documentation. **This version is end of life.** You should upgrade to a newer version. For more information, see [Supported versions](/apigee/docs/hybrid/supported-platforms#supported-versions).\n\nThis step explains how to create the TLS credentials\nthat are required for Apigee hybrid to operate.\n\nCreate TLS certificates\n\n\nYou are required to provide TLS certificates for the runtime ingress gateway in your\nApigee hybrid configuration. For the purpose of this quickstart (a non-production trial installation),\nthe runtime gateway can accept self-signed credentials. In the following steps,\n[openssl](https://www.openssl.org/) is used to generate the self-signed credentials.\n| **Note:** In a production environment, you will need to use signed certificates. You can either use either a certificate and key pair or a Kubernetes secret. For an example on how to obtain a TLS certificate from the *Lets Encrypt* certificate authority (CA), see [Obtain TLS credentials: An example](/apigee/docs/hybrid/v1.6/lets-encrypt).\n\n\nIn this step, you will create the TLS credential files and add them to\nthe \u003cvar translate=\"no\"\u003ebase_directory\u003c/var\u003e`/hybrid-files/certs` directory.\nIn [Step 7: Configure the\nhybrid runtime](/apigee/docs/hybrid/v1.6/install-configure-cluster), you will add the file paths to the cluster configuration file.\n\n1. Be sure that you are in the \u003cvar translate=\"no\"\u003ebase_directory\u003c/var\u003e`/hybrid-files` directory you configured in [Set up the project directory structure](#setup-directory).\n2. Make sure to save a domain name to the **`DOMAIN`** environment variable using the following command: \n\n ```\n echo $DOMAIN\n ```\n3. Execute the following command from inside the `hybrid-files` directory: \n\n ```\n openssl req -nodes -new -x509 -keyout ./certs/keystore.key -out \\\n ./certs/keystore.pem -subj '/CN='$DOMAIN'' -days 3650\n ```\n\n\n Where **`DOMAIN`** is the same one you used for your environment in\n [Part 1, Step 5: Create an\n environment group](/apigee/docs/hybrid/v1.6/precog-add-environment).\n\n\n This command creates a self-signed certificate/key pair that you can use for the quickstart\n installation.\n4. Check to make sure the files are in the `./certs` directory using the following command: \n\n ```\n ls ./certs\n ``` \n\n ```text\n keystore.key\n keystore.pem\n ```\n\n\n Where `keystore.pem` is the self-signed TLS certificate file and `keystore.key`\n is the key file.\n\n\nYou now have the credentials needed to manage Apigee hybrid\nin your Kubernetes cluster. Next, you will create a file that is used by Kubernetes\nto deploy the hybrid runtime components to the cluster.\n[1](/apigee/docs/hybrid/v1.6/install-create-cluster) [2](/apigee/docs/hybrid/v1.6/install-cert-manager) [3](/apigee/docs/hybrid/v1.6/install-asm) [4](/apigee/docs/hybrid/v1.6/install-apigeectl) [5](/apigee/docs/hybrid/v1.6/install-service-accounts) [6](/apigee/docs/hybrid/v1.6/install-create-tls-certificates) [(NEXT) Step 7: Configure the hybrid runtime](/apigee/docs/hybrid/v1.6/install-configure-cluster) [8](/apigee/docs/hybrid/v1.6/install-enable-synchronizer-access) [9](/apigee/docs/hybrid/v1.6/install-hybrid-runtime)\n\n\u003cbr /\u003e"]]
