Upgrading Apigee hybrid to version 1.9

This procedure covers upgrading from Apigee hybrid version 1.8.x to Apigee hybrid version 1.9.4 and from previous releases of hybrid 1.9.x to version 1.9.4.

Use the same procedures for minor version upgrades (for example version 1.8 to 1.9) and for patch release upgrades (for example 1.9.0 to 1.9.4).

If you are upgrading from Apigee hybrid version 1.7 or older, you must first upgrade to hybrid version 1.8 before upgrading to version 1.9.4. See the instructions for Upgrading Apigee hybrid to version 1.8.

Starting with version 1.9.0, Apigee hybrid only supports Apigee ingress gateway as the ingress layer.

Upgrading to version 1.9.4 overview

The procedures for upgrading Apigee hybrid are organized in the following sections:

  1. Prepare to upgrade.
  2. Install hybrid runtime version 1.9.4.

Prerequisites

  • These upgrade instructions assume you have Apigee hybrid version 1.8.x installed and wish to upgrade it to version 1.9.4. If you are updating from an earlier version, see the instructions for Upgrading Apigee hybrid to version 1.8.
  • In Apigee hybrid version 1.8, we introduced Apigee ingress gateway as an alternative ingress layer to Anthos Service Mesh. Starting with version 1.9.0, Apigee hybrid requires using Apigee ingress gateway and no longer supports using Anthos Service Mesh for ingress. If the installation you are upgrading from uses Anthos Service Mesh, you must first migrate to using Apigee ingress gateway before upgrading to version 1.9.4.

    Apigee ingress gateway uses a small subset of Anthos Service Mesh features for the ingress gateway. Management and upgrade of those features are handled automatically by Apigee hybrid. Therefore you do not need expertise with Anthos Service Mesh to install, upgrade, and manage the Apigee hybrid ingress gateway.

    See Migrating to Apigee ingress gateway in the hybrid v1.8 documentation for instructions.

Prepare to upgrade to version 1.9

  1. These instructions use the environment variable APIGEECTL_HOME for the directory in your file system where you have installed apigeectl. If needed, change directory into your apigeectl directory and define the variable with the following command:

    Linux

    export APIGEECTL_HOME=$PWD
    echo $APIGEECTL_HOME

    Mac OS

    export APIGEECTL_HOME=$PWD
    echo $APIGEECTL_HOME

    Windows

    set APIGEECTL_HOME=%CD%
    echo %APIGEECTL_HOME%
  2. Make a backup copy of your version 1.8 $APIGEECTL_HOME/ directory. For example:
    tar -czvf $APIGEECTL_HOME/../apigeectl-v1.8-backup.tar.gz $APIGEECTL_HOME
  3. Back up your Cassandra database following the instructions in Cassandra backup and recovery.

Add the Cloud Trace Agent role to the service account for the Apigee runtime. (Optional)

Optional: If you plan to use Cloud trace and you have not already added the Cloud Trace Agent role to your hybrid v1.8 installation, ensure your service account for your Apigee runtime services has the Cloud Trace Agent Google Cloud IAM role (roles/cloudtrace.agent).

For production environments, runtime service account is apigee-runtime. For non-production environments, runtime service account is apigee-non-prod.

You can add the role in the Cloud console > IAM & Admin > Service accounts UI or with the following commands:

  1. Get the email address for your service account with the following command:

    Production

    gcloud iam service-accounts list --filter "apigee-runtime"

    If the email address matches the pattern apigee-runtime@$ORG_NAME.iam.gserviceaccount.com, you can use that pattern in the next step.

    Non-Prod

    gcloud iam service-accounts list --filter "apigee-non-prod"

    If it matches the pattern apigee-non-prod@$ORG_NAME.iam.gserviceaccount.com, you can use that pattern in the next step.

  2. Assign the Cloud Trace Agent role to the service account:

    Production

    gcloud projects add-iam-policy-binding $PROJECT_ID \
        --member="serviceAccount:apigee-runtime@$PROJECT_ID.iam.gserviceaccount.com" \
        --role="roles/cloudtrace.agent"

    Non-Prod

    gcloud projects add-iam-policy-binding $PROJECT_ID \
        --member="serviceAccount:apigee-non-prod@$PROJECT_ID.iam.gserviceaccount.com" \
        --role="roles/cloudtrace.agent"

    Example

    gcloud projects add-iam-policy-binding hybrid-example-project \
        --member="serviceAccount:apigee-runtime@hybrid-example-project.iam.gserviceaccount.com" \
        --role="roles/cloudtrace.agent"

    Where: $PROJECT_ID is the name of the Google Cloud project where Apigee hybrid is installed.

Install Apigee ingress gateway if your installation uses Anthos Service Mesh

Starting with version 1.9, Apigee hybrid no longer supports using Anthos Service Mesh for ingress. If your hybrid installation is using Anthos Service Mesh, you must migrate your current installation to Apigee ingress gateway before installing hybrid version 1.9.

  1. Add the ingressGateways property to your overrides file.

    Syntax

      ingressGateways:
      - name: INGRESS_NAME
        replicaCountMin: REPLICAS_MIN
        replicaCountMax: REPLICAS_MAX
        resources:
          requests:
            cpu: CPU_COUNT_REQ
            memory: MEMORY_REQ
          limits:
            cpu: CPU_COUNT_LIMIT
            memory: MEMORY_LIMIT
        svcAnnotations:  # optional. See Known issue 243599452.
          SVC_ANNOTATIONS_KEY: SVC_ANNOTATIONS_VALUE
        svcLoadBalancerIP: SVC_LOAD_BALANCER_IP # optional

    Example

      ingressGateways:
      - name: prod1
        replicaCountMin: 2
        replicaCountMax: 100
        resources:
          requests:
            cpu: 1
            memory: 1Gi
          limits:
            cpu: 2
            memory: 2Gi
        svcAnnotations:  # optional. See Known issue 243599452.
          networking.gke.io/load-balancer-type: "Internal"
        svcLoadBalancerIP: 198.252.0.123 
    • INGRESS_NAME is the name of the ingress deployment. This can be any name that meets the following requirements:
      • Have a maximum length of 17 characters
      • Contain only lowercase alphanumeric characters, '-' or '.'
      • Start with an alphanumeric character
      • End with an alphanumeric character
      See ingressGateways[].name in the Configuration property reference.
    • REPLICAS_MIN and REPLICAS_MAX are the minimum and maximum replica counts for Apigee ingress gateway in your installation. For more information and default settings, see ingressGateways[].replicaCountMin and ingressGateways[].replicaCountMax in the Configuration property reference.
    • CPU_COUNT_REQ and MEMORY_REQ are the CPU and memory request for each replica of Apigee ingress gateway in your installation.

      For more information and default settings, see ingressGateways[].resources.requests.cpu and ingressGateways[].resources.requests.memory in the Configuration property reference.

    • CPU_COUNT_LIMIT and MEMORY_LIMIT Are the maximum CPU and memory limits for each replica of Apigee ingress gateway in your installation.

      For more information and default settings, see ingressGateways[].resources.limits.cpu and ingressGateways[].resources.limits.memory in the Configuration property reference.

    • SVC_ANNOTATIONS_KEY SVC_ANNOTATIONS_VALUE (optional):

      This is a key-value pair that provides annotations for your default ingress service. Annotations are used by your cloud platform to help configure your hybrid installation, for example setting the loadbalancer type to either internal or external. For example:

      ingressGateways:
          svcAnnotations:
            networking.gke.io/load-balancer-type: "Internal"

      Annotations vary from platform to platform. Refer to your platform documentation for required and suggested annotations.

      See ingressGateways[].svcAnnotations in the Configuration property reference.
    • SVC_LOAD_BALANCER_IP (optional) Allows you to assign a static IP address for your load balancer. On platforms that support specifying the load balancer IP address, the load balancer will be created with this IP address. On platforms that do not allow you to specify the load balancer IP address, this property is ignored.

      If you do not have a static IP address allocated for your load balancer, leave this property out of your overrides file.

      See ingressGateways[].svcLoadBalancerIP in the Configuration property reference.
  2. Apply the changes to install Apigee ingress gateway with the following commands:
    $APIGEECTL_HOME/apigeectl apply -f overrides/overrides.yaml
  3. Expose the Apigee ingress gateway. Follow the procedures in Expose Apigee ingress gateway.
  4. Test your new ingress gateway by calling a proxy. Ideally, test all crucial proxies you currently have deployed.
  5. To switch the traffic, update your DNS records to point to the IP address for your new Apigee ingress gateway. Depending on your DNS provider, you might be able to gradually shift traffic to the new endpoint. Tip: You can find the external IP address of Apigee ingress gateway with the following command:
    kubectl get svc -n apigee -l app=apigee-ingressgateway

    Your output should look something like:

    NAME                                        TYPE           CLUSTER-IP    EXTERNAL-IP     PORT(S)                                      AGE
    apigee-ingressgateway-prod-hybrid-37a39bd   LoadBalancer   192.0.2.123   233.252.0.123   15021:32049/TCP,80:31624/TCP,443:30723/TCP   16h
  6. Ensure all the runtime traffic is working by monitoring your dashboards. Only proceed to the next step if everything is working as expected. Make sure no traffic is going through your old ingress gateway (Anthos Service Mesh), as the DNS update may be slow to propagate because of DNS caching.
  7. To stop Apigee from supplying configuration to Anthos Service Mesh, follow the steps in Stop supplying configuration to ASM in the Managing Apigee ingress gateway guide.
  8. Retest and monitor API proxy traffic.
  9. Follow the instructions in the Anthos Service Mesh documentation to Uninstall Anthos Service Mesh from the cluster.

Install the hybrid 1.9.4 runtime

  1. Be sure you are in the hybrid base directory (the parent of the directory where the apigeectl executable file is located):
    cd $APIGEECTL_HOME/..
  2. Download the release package for your operating system using the following command. Be sure to select your platform in the following table:

    Linux

    Linux 64 bit:

    curl -LO \
      https://storage.googleapis.com/apigee-release/hybrid/apigee-hybrid-setup/1.9.4/apigeectl_linux_64.tar.gz

    Mac OS

    Mac 64 bit:

    curl -LO \
      https://storage.googleapis.com/apigee-release/hybrid/apigee-hybrid-setup/1.9.4/apigeectl_mac_64.tar.gz

    Windows

    Windows 64 bit:

    curl -LO ^
      https://storage.googleapis.com/apigee-release/hybrid/apigee-hybrid-setup/1.9.4/apigeectl_windows_64.zip
  3. Rename your current apigeectl/ directory to a backup directory name. For example:

    Linux

    mv $APIGEECTL_HOME/ $APIGEECTL_HOME-v1.8/

    Mac OS

    mv $APIGEECTL_HOME/ $APIGEECTL_HOME-v1.8/ 

    Windows

    rename %APIGEECTL_HOME% %APIGEECTL_HOME%-v1.8 
  4. Extract the downloaded gzip file contents into your hybrid base directory. The hybrid base directory is the directory where the renamed apigeectl-v1.8 directory is located:

    Linux

    tar xvzf filename.tar.gz -C ./

    Mac OS

    tar xvzf filename.tar.gz -C ./

    Windows

    tar xvzf filename.zip -C ./
  5. The tar contents are, by default, expanded into a directory with the version and platform in its name. For example: ./apigeectl_1.9.4-xxxxxxx_linux_64. Rename that directory to apigeectl using the following command:

    Linux

    mv apigeectl_1.9.4-xxxxxxx_linux_64 apigeectl

    Mac OS

    mv apigeectl_1.9.4-xxxxxxx_mac_64 apigeectl

    Windows

    rename apigeectl_1.9.4-xxxxxxx_windows_64 apigeectl
  6. Change to the apigeectl directory:
    cd ./apigeectl

    This directory is the apigeectl home directory. It is where the apigeectl executable command is located.

  7. These instructions use the environment variable $APIGEECTL_HOME for the directory in your file system where the apigeectl utility is installed. If needed, change directory into your apigeectl directory and define the variable with the following command:

    Linux

    export APIGEECTL_HOME=$PWD
    echo $APIGEECTL_HOME

    Mac OS

    export APIGEECTL_HOME=$PWD
    echo $APIGEECTL_HOME

    Windows

    set APIGEECTL_HOME=%CD%
    echo %APIGEECTL_HOME%
  8. Verify the version of apigeectl with the version command:
    ./apigeectl version
    Version: 1.9.4
  9. Move to the hybrid-base-directory/hybrid-files directory. The hybrid-files directory is where configuration files such as the overrides file, certs, and service accounts are located. For example:
    cd $APIGEECTL_HOME/../hybrid-files
  10. Verify that kubectl is set to the correct context using the following command. The current context should be set to the cluster in which you are upgrading Apigee hybrid.
    kubectl config get-contexts | grep \*
  11. In the hybrid-files directory:
    1. Update the following symbolic links to $APIGEECTL_HOME. These links allow you to run the newly installed apigeectl command from inside the hybrid-files directory:
      ln -nfs $APIGEECTL_HOME/tools tools
      ln -nfs $APIGEECTL_HOME/config config
      ln -nfs $APIGEECTL_HOME/templates templates
      ln -nfs $APIGEECTL_HOME/plugins plugins
    2. To check that the symlinks were created correctly, execute the following command and make sure the link paths point to the correct locations:
      ls -l | grep ^l
  12. Do a dry run initialization to check for errors:
    ${APIGEECTL_HOME}/apigeectl init -f OVERRIDES_FILE --dry-run=client

    Where OVERRIDES_FILE is the name of your overrides file, for example ./overrides/overrides.yaml.

  13. If there are no errors, initialize hybrid 1.9.4:
    $APIGEECTL_HOME/apigeectl init -f OVERRIDES_FILE
  14. Check the initialization status:
    $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE

    On success, the output says: All containers ready.

    kubectl describe apigeeds -n apigee

    In the output, look for State: running.

  15. Check for errors with a dry run of the apply command using the --dry-run flag:
    $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE --dry-run=client
  16. If there are no errors, apply your overrides. Select and follow the instructions for production environments or non-prod environments, depending on your installation.

    Production

    For production environments, upgrade each hybrid component individually, and check the status of the upgraded component before proceeding to the next component.

    1. Be sure you are in the hybrid-files directory.
    2. Apply your overrides to upgrade Cassandra:
      $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE --datastore
    3. Check completion:
      $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE

      Proceed to the next step only when the pods are ready.

    4. Apply your overrides to upgrade Telemetry components and check completion:
      $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE --telemetry
      $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE
    5. Bring up Redis components:
      $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE --redis
    6. Apply your overrides to upgrade the org-level components (MART, Watcher and Apigee Connect) and check completion:
      $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE --org
      $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE
    7. Apply your overrides to upgrade your environments. You have two choices:
      • Environment by environment: Apply your overrides to one environment at a time and check completion. Repeat this step for each environment:
        $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE --env ENV_NAME
        $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE

        Where ENV_NAME is the name of the environment you are upgrading.

      • All environments at one time: Apply your overrides to all environments at once and check completion:
        $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE --all-envs
        $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE
    8. Apply your overrides to upgrade the virtualhosts components and check completion:
      $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE --settings virtualhosts
      $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE

    Non-prod

    In most non-production, demo, or experimental environments, you can apply the overrides to all components at once. If your non-production environment is large and complex or closely mimics a production environment, you may want to use the instructions for upgrading production environments.

    1. Be sure you are in the hybrid-files directory.
    2. $APIGEECTL_HOME/apigeectl apply -f OVERRIDES_FILE
    3. Check the status:
      $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE

Install 1.9.4-hotfix.1

Follow these steps to install the hotfix release, 1.9.4-hotfix.1:

  1. Before doing these steps, you must be on Apigee hybrid version 1.9.4 or a later version. If you are not on 1.9.4 or later, perform an upgrade to 1.9.4 before proceeding.
  2. Open your overrides.yaml file.
  3. In the istiod stanza, change the version of the image tag (if present) to version 1.17.7. For example:
    istiod:
      image:
        url: "gcr.io/apigee-release/hybrid/apigee-asm-istiod"
        tag: "1.17.7-asm.0-distroless"
  4. Depending on how you chose to install Apigee hybrid, you may have an ingressGateway or ingressGateways stanza. Locate the stanza that appears in your overrides file and change the version of the image tag (if present) to version 1.17.7. For example, if you have an ingressGateway stanza:
    ingressGateway:
      image:
        url: "gcr.io/apigee-release/hybrid/apigee-asm-ingress"
        tag: "1.17.7-asm.0-distroless"

    or, if you have an ingressGateways stanza:

    ingressGateways:
      - name: gateway1
        image:
          url: "gcr.io/apigee-release/hybrid/apigee-asm-ingress"
          tag: "1.17.7-asm.0-distroless"
        ...
      - name: gateway2
        image:
          url: "gcr.io/apigee-release/hybrid/apigee-asm-ingress"
          tag: "1.17.7-asm.0-distroless"
        ...
      
  5. Save the file.
  6. Execute the following command to initialize the istiod component:
    $APIGEECTL_HOME/apigeectl init -f OVERRIDES_FILE
    $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE
  7. Execute the following command to apply changes to the Apigee ingress component(s). If you have more than one organization, repeat this command for each one:
    $APIGEECTL_HOME/apigeectl apply --org -f OVERRIDES_FILE
    $APIGEECTL_HOME/apigeectl check-ready -f OVERRIDES_FILE
  8. Verify the status of your pods:
    kubectl get pods -n YOUR_APIGEE_NAMESPACE

Upgrade your Kubernetes version

Upgrade your Kubernetes platform to the versions supported by hybrid 1.9. Follow your platform's documentation if you need help.

Rolling back an upgrade

Follow these steps to roll back a previous upgrade:

  1. Clean up completed jobs for the hybrid runtime namespace, where NAMESPACE is the namespace specified in your overrides file, if you specified a namespace. If not, the default namespace is apigee:
    kubectl delete job -n NAMESPACE \
      $(kubectl get job -n NAMESPACE \
      -o=jsonpath='{.items[?(@.status.succeeded==1)].metadata.name}')
  2. Clean up completed jobs for the apigee-system namespace:
    kubectl delete job -n apigee-system \
      $(kubectl get job -n apigee-system \
      -o=jsonpath='{.items[?(@.status.succeeded==1)].metadata.name}')
  3. Change the APIGEECTL_HOME variable to point to the directory that contains the previous version of apigeectl. For example:
    export APIGEECTL_HOME=PATH_TO_PREVIOUS_APIGEECTL_DIRECTORY
  4. In the root directory of the installation you want to roll back to, run apigeectl apply, check the status of your pods, and then run apigeectl init. Be sure to use the original overrides file for the version you wish to roll back to:
    1. In the hybrid-files directory, run apigeectl apply:
      $APIGEECTL_HOME/apigeectl apply -f ORIGINAL_OVERRIDES_FILE

      Where ORIGINAL_OVERRIDES_FILE is the relative path and filename of the overrides file for your previous version hybrid installation, for example, ./overrides/overrides1.8.yaml.

    2. Check the status of your pods:
      kubectl -n NAMESPACE get pods

      Where NAMESPACE is your Apigee hybrid namespace.

    3. Check the status of apigeeds:
      kubectl describe apigeeds -n apigee

      Your output should look something like:

      Status:
        Cassandra Data Replication:
        Cassandra Pod Ips:
          10.8.2.204
        Cassandra Ready Replicas:  1
        Components:
          Cassandra:
            Last Successfully Released Version:
              Revision:  v1-f8aa9a82b9f69613
              Version:   v1
            Replicas:
              Available:  1
              Ready:      1
              Total:      1
              Updated:    1
            State:        running
        Scaling:
          In Progress:         false
          Operation:
          Requested Replicas:  0
        State:                 running

      Proceed to the next step only when the apigeeds pod is running.

    4. Run the following command to make note of what your new replica count values will be for the message processor after the upgrade. If these values do not match what you have set previously, change the values in your overrides file to match your previous configuration.
      apigeectl apply -f ORIGINAL_OVERRIDES_FILE --dry-run=client --print-yaml --env ENV_NAME 2>/dev/null |grep "runtime:" -A 25 -B 1| grep "autoScaler" -A 2

      Your output should look something like:

            autoScaler:
              minReplicas: 2
              maxReplicas: 10
    5. Run apigeectl init:
      $APIGEECTL_HOME/apigeectl init -f ORIGINAL_OVERRIDES_FILE