apigeectl

You are currently viewing version 1.4 of the Apigee hybrid documentation. This version is end of life. You should upgrade to a newer version. For more information, see Supported versions.

Version 1.4 (unsupported)

   Supported versions:

• v1.14 (latest)                        
• v1.13                         
• v1.12                         
• v1.11                         
• List of supported versions

   Unsupported versions:

• v1.10                                      
• v1.9                                         
• v1.8                                         
• v1.7                                         
• v1.6                                         
• v1.5                                         
• v1.4                                         
• v1.3                                         
• v1.2                                         
• v1.1                                         

apigeectl is a command-line interface (CLI) for installing and managing Apigee hybrid in a Kubernetes cluster. For information on downloading and installing apigeectl, see Download and install apigeectl.

NOTE: You must have kubectl installed and set up on your Kubernetes administration machine to use the apigeectl command.

Scopes for applying apigeectl

By using apigeectl flags you control which scopes the command applies configuration changes to. For an overview of scopes within the Apigee hybrid runtime see the Runtime service configuration overview.

Scope	Components	apigeectl flag
Storage	Cassandra	--datastore
Environment	Runtime Synchronizer UDCA	--all-envs --env
Organization	Apigee Connect Agent MART Watcher	--org
Reporting	Logger Metrics	--telemetry

apigeectl syntax

apigeectl [command] [flags]

Where:

• command: Specifies the operation you want to perform. For a complete list of commands, see apigeectl commands.

• flags: Specifies command parameters. For a complete list of flags, see apigeectl flags.

apigeectl commands

The following table lists the apigeectl commands:

Command	Description
apply	Applies configurations for Apigee hybrid runtime components to your Kubernetes cluster. apigeectl apply without flags will apply changes to all components in the cluster. apigeectl flags: --all-envs, --datastore, --dry-run, --env, -f, --file-override-config, --help, --org, --print-yaml, --settings virtualhosts, --telemetry, --verbose NOTE: After a fresh install or an upgrade, you must call apigeectl init before calling apigeectl apply.
check‑ready	Checks the status of the hybrid component pods. When all component pods are ready, the message "All containers ready" is output. For automated scripting, note that the command exits with a status of 0 when the containers are all ready. When there is at least one pod not ready, the command exits with a status of 1. apigeectl flags: -f, --file-override-config, --help, --verbose
delete	Deletes hybrid components from the cluster. Use the --all flag to remove ALL of the components. If you omit --all, only the Apigee-specific components are removed (the components installed with apigeectl init are not deleted). Apigee-specific components are the components that are installed with the apply command. apigeectl delete without any optional flags applies the delete command applies to all of the components deployed in the cluster. apigeectl flags: --all, --all-envs, --datastore, --env, -f, --file-override-config, --help, --org, --telemetry, --verbose
encode	Returns a list of encoded names of all the ApigeeDeployments for the specified organization or the specified environment within the specified organization. The encoded names include the name of the component with a hashed name of the organization and if using the --env flag, a hashed name of the environment. Apigee hybrid creates hashed names of organizations and environments to be able to avoid namespace collisions. You must use either the --org org-name or both the --org org-name with the --env env-name flags with encode. For example: ./apigeectl encode --org hybrid-example List of ApigeeDeployments are: apigee-connect-agent-hybrid-example-6a82f8a apigee-mart-hybrid-example-6a82f8a apigee-watcher-hybrid-example-6a82f8a ./apigeectl encode --org hybrid-example --env example-env List of ApigeeDeployments are: apigee-runtime-hybrid-example-example-env-9e87e2d apigee-synchronizer-hybrid-example-example-env-9e87e2d apigee-udca-hybrid-example-example-env-9e87e2d apigeectl flags: --env, --org
help	Prints online help.
init	Installs Apigee Operators and CRDs in the apigee-system namespace. Run apigeectl init after a fresh install or upgrade before running apigeectl apply. apigeectl flags: -f, --file-override-config, --help, --verbose
version	Prints the CLI version information. apigeectl flag: --help

apigeectl flags

The following table lists the apigeectl flags:

Flag	Description
--all	delete only: Deletes the entire Apigee hybrid installation except ASM (Istio) and cert-manager from your cluster.
--all-envs	Applies the apigeectl command to all environments under the organization specified in your overrides config file.
--datastore	Applies the configuration to the datastore scope (cassandra).
‑‑dry‑run	Executes the specified command without changing the cluster. Use with ‑‑print-yaml to output the rendered object spec to a file. ‑‑dry‑run must be used with one of the two following values, depending on the version of kubectl you are running. Use gcloud version to check your kubectl version: kubectl version 1.17.x or older: ‑‑dry‑run=true kubectl version 1.18.x or newer: ‑‑dry‑run=client
--env env-name	Applies the configuration to the specified environment. This flag will apply configuration to environment scope components apigee-runtime, apigee-synchronizer and apigee-udca. --env must be used with the --org flag. For example: apigeectl apply --org hybrid-example --env example-env \ -f overrides/overrides.yaml
‑f, ‑‑file‑override‑config	Specifies a YAML file containing custom configuration properties for the hybrid deployment. The default value is ./overrides.yaml. An overrides file is required for the apply, check-ready, delete, and init commands. You must specify the full path with this flag. For more information, see Managing runtime plane components.
-h, --help	Displays help for the command.
--org	Applies the configuration to the specified organization. This flag will apply configuration to the org scope components apigee-connect-agent, apigee-mart and apigee-watcher. Note: When using --org with encode you must include the organization ID. For example: apigeectl encode --org example-org
--print-yaml	Prints the configuration template output to stdout. For an example that uses this flag, see Print the configuration to a file.
-s, --settings virtualhosts	Specifies a configuration to which the command applies. Currently, this flag is only supported for the virtualhosts configuration, which is part of the runtime component. Use this flag if you make changes to the virtualhosts property, and nothing else. For example, if you make a change to the virtualhosts configuration in your overrides file, apply it to the cluster with this command: apigeectl apply -f my-overrides.yaml --settings virtualhosts \ --org example-org --env example-env
--telemetry	Applies the configuration for telemetry components like apigee-logger and apigee-metrics.
--verbose	Prints verbose logs to std err.

The apigeectl command uses kubectl behind the scenes to do its work. The apigeectl command options (apply and delete, and the use of YAML configuration files, are similar to their kubectl counterparts. To learn more about how objects are managed in a Kubernetes cluster, see the following topics:

• Imperative Management of Kubernetes Objects Using Configuration Files
• Overview of kubectl

Examples

Initialize the cluster configuration

Apply prerequisite component configurations to your cluster with init. You must run the init command before apply.

apigeectl init -f my_overrides.yaml

Apply the cluster configuration

To apply hybrid configurations to your Kubernetes cluster, use the apply command. The first time you run apply all of the hybrid runtime components are created in your cluster. If you make configuration changes, rerun apply to apply only the changes or use flags to apply a changes to a specific scope only.

The following example applies the configuration for hybrid runtime plane components to your cluster:

apigeectl apply -f my_overrides.yaml

Apply the configuration for a single component

To restrict the apply command to a particular component, use the flags described in apigeectl flags.

The following example only applies the configuration for the Cassandra component:

apigeectl apply --datastore -f my_overrides.yaml

Print the configuration to a file

If you're debugging an installation problem, it's useful to print out the entire cluster configuration to a file so that you can inspect the configuration settings. The --print-yaml flag prints the hybrid configuration to stdout, and the --dry-run flag allows the command to run without making any changes to the cluster.

apigeectl apply -f my_overrides.yaml --dry-run=client --print-yaml > apigee-hybrid.yaml

NOTE: It is a good practice to save a copy of the YAML output in source control for future reference. But be aware that the output file contains passwords and secrets that you may not want to store.

Check pod status

The following example checks the status of pods deployed to your cluster:

apigeectl check-ready -f overrides/overrides.yaml
All containers ready in namespace 'my-namespace'

Delete hybrid from the cluster

The following example deletes only the hybrid runtime components to your Kubernetes cluster. To delete everything, use the --all flag.

NOTE: To uninstall successfully, you must have kubectl version 1.11.x or later installed.

apigeectl delete -f my_overrides.yaml