Upgrading Apigee hybrid to version 1.13

This procedure covers upgrading from Apigee hybrid version 1.12.x to Apigee hybrid version 1.13.2.

Changes from Apigee hybrid v1.12

Please note the following changes:

apigee-operator in the Apigee namespace: Starting in version 1.13, apigee-operator runs in the same Kubernetes namespace as the other Apigee hybrid components, apigee by default. You can supply any name for the namespace. In previous versions, the apigee-operator was required to run in its own namespace, apigee-system.
Anthos (on bare metal or VMware) is now Google Distributed Cloud (for bare metal or VMware): For more information see the product overviews for Google Distributed Cloud for bare metal and Google Distributed Cloud for VMware.

Prerequisites

Before upgrading to hybrid version 1.13, make sure your installation meets the following requirements:

If your hybrid installation is running a version older than v1.12, you must upgrade to version 1.12 before upgrading to v1.13. See Upgrading Apigee hybrid to version 1.12.
Helm version v3.14.2+.
kubectl: A supported version of kubectl appropriate for your Kubernetes platform version. see Supported platforms and versions: kubectl.
cert-manager: A supported version of cert-manager. See Supported platforms and versions: cert-manager. If needed, you will upgrade cert-manager in the Prepare to upgrade to version 1.13 section below.

Upgrading to version 1.13.2 overview

Upgrading to Apigee hybrid version 1.13 may require downtime.

When upgrading the Apigee controller to version 1.13.2, all Apigee deployments undergo a rolling restart. To minimize downtime in production hybrid environments during a rolling restart, make sure you are running at least two clusters (in the same or different region/data center). Divert all production traffic to a single cluster and take the cluster you are about to upgrade offline, and then proceed with the upgrade process. Repeat the process for each cluster.

Apigee recommends upgrading all clusters as soon as possible to reduce the chances of production impact. There is no time limit on when all remaining clusters must be upgraded after the first one is upgraded. However, until all remaining clusters are upgraded the following operations will be impacted:

Cassandra backup and restore cannot work with mixed versions. For example, a backup from Hybrid 1.12 cannot be used to restore a Hybrid 1.13 instance.
Cassandra data streaming will not work between mixed Hybrid versions. Therefore, your Cassandra clusters cannot scale horizontally.
Region expansion and decommissioning will be impacted, because these operations depend on Cassandra data streaming.

The procedures for upgrading Apigee hybrid are organized in the following sections:

Prepare to upgrade.
Install hybrid runtime version 1.13.2.

Prepare to upgrade to version 1.13

Back up your hybrid installation

These instructions use the environment variable APIGEE_HELM_CHARTS_HOME for the directory in your file system where you have installed the Helm charts. If needed, change directory into this directory and define the variable with the following command:
Linux
```
export APIGEE_HELM_CHARTS_HOME=$PWD
echo $APIGEE_HELM_CHARTS_HOME
```
Mac OS
```
export APIGEE_HELM_CHARTS_HOME=$PWD
echo $APIGEE_HELM_CHARTS_HOME
```
Windows
```
set APIGEE_HELM_CHARTS_HOME=%CD%
echo %APIGEE_HELM_CHARTS_HOME%
```
Make a backup copy of your version 1.12 $APIGEE_HELM_CHARTS_HOME/ directory. You can use any backup process. For example, you can create a tar file of your entire directory with:
```
tar -czvf $APIGEE_HELM_CHARTS_HOME/../apigee-helm-charts-v1.12-backup.tar.gz $APIGEE_HELM_CHARTS_HOME
```
Back up your Cassandra database following the instructions in Cassandra backup and recovery.

If you are using service cert files (.json) in your overrides to authenticate service accounts, make sure your service account cert files reside in the correct Helm chart directory. Helm charts cannot read files outside of each chart directory.

This step is not required if you are using Kubernetes secrets or Workload Identity to authenticate service accounts.

The following table shows the destination for each service account file, depending on your type of installation:

Prod

Service account	Default filename	Helm chart directory
`apigee-cassandra`	`PROJECT_ID-apigee-cassandra.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-datastore/`
`apigee-logger`	`PROJECT_ID-apigee-logger.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-telemetry/`
`apigee-mart`	`PROJECT_ID-apigee-mart.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-org/`
`apigee-metrics`	`PROJECT_ID-apigee-metrics.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-telemetry/`
`apigee-runtime`	`PROJECT_ID-apigee-runtime.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-env`
`apigee-synchronizer`	`PROJECT_ID-apigee-synchronizer.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-env/`
`apigee-udca`	`PROJECT_ID-apigee-udca.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-org/`
`apigee-watcher`	`PROJECT_ID-apigee-watcher.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-org/`

Non-prod

Make a copy of the apigee-non-prod service account file in each of the following directories:

Service account	Default filename	Helm chart directories
`apigee-non-prod`	`PROJECT_ID-apigee-non-prod.json`	`$APIGEE_HELM_CHARTS_HOME/apigee-datastore/` `$APIGEE_HELM_CHARTS_HOME/apigee-telemetry/` `$APIGEE_HELM_CHARTS_HOME/apigee-org/` `$APIGEE_HELM_CHARTS_HOME/apigee-env/`

Make sure that your TLS certificate and key files (.crt, .key, and/or .pem) reside in the $APIGEE_HELM_CHARTS_HOME/apigee-virtualhost/ directory.

Upgrade your Kubernetes version

Check your Kubernetes platform version and if needed, upgrade your Kubernetes platform to a version that is supported by both hybrid 1.12 and hybrid 1.13. Follow your platform's documentation if you need help.

Click to expand a list of supported platforms

	1.10 ⁽²⁾	1.11	1.12	1.13
GKE on Google Cloud	1.24.x 1.25.x 1.26.x 1.27.x^{(≥ 1.10.5)} 1.28.x^{(≥ 1.10.5)}	1.25.x 1.26.x 1.27.x 1.28.x^{(≥ 1.11.2)} 1.29.x^{(≥ 1.11.2)}	1.26.x 1.27.x 1.28.x 1.29.x^{(≥ 1.12.1)}	1.27.x 1.28.x 1.29.x 1.30.x
GKE on AWS	1.13.x (K8s v1.24.x) 1.14.x (K8s v1.25.x) 1.26.x⁽⁴⁾ 1.27.x^{(≥ 1.10.5)} 1.28.x^{(≥ 1.10.5)}	1.14.x (K8s v1.25.x) 1.26.x⁽⁴⁾ 1.27.x 1.28.x^{(≥ 1.11.2)} 1.29.x^{(≥ 1.11.2)}	1.26.x⁽⁴⁾ 1.27.x 1.28.x 1.29.x^{(≥ 1.12.1)}	1.27.x 1.28.x 1.29.x^{(≥ 1.12.1)} 1.30.x
GKE on Azure	1.13.x 1.14.x 1.26.x⁽⁴⁾ 1.27.x^{(≥ 1.10.5)} 1.28.x^{(≥ 1.10.5)}	1.14.x 1.26.x⁽⁴⁾ 1.27.x 1.28.x^{(≥ 1.11.2)} 1.29.x^{(≥ 1.11.2)}	1.26.x⁽⁴⁾ 1.27.x 1.28.x 1.29.x^{(≥ 1.12.1)}	1.27.x 1.28.x 1.29.x^{(≥ 1.12.1)} 1.30.x
Google Distributed Cloud (software only) on VMware ⁽⁵⁾	1.13.x ⁽¹⁾ 1.14.x 1.15.x (K8s v1.26.x) 1.16.x (K8s v1.27.x) 1.27.x^{(≥ 1.10.5)} 1.28.x^{(≥ 1.10.5)}	1.14.x 1.15.x (K8s v1.26.x) 1.16.x (K8s v1.27.x) 1.28.x^{(≥ 1.11.2)} 1.29.x^{(≥ 1.11.2)}	1.15.x (K8s v1.26.x) 1.16.x (K8s v1.27.x) 1.28.x⁽⁴⁾ 1.29.x^{(≥ 1.12.1)}	1.16.x (K8s v1.27.x) 1.28.x⁽⁴⁾ 1.29.x 1.30.x
Google Distributed Cloud (software only) on bare metal	1.13.x ⁽¹⁾ 1.14.x (K8s v1.25.x) 1.15.x (K8s v1.26.x) 1.16.x (K8s v1.27.x) 1.27.x⁽⁴⁾^{(≥ 1.10.5)} 1.28.x^{(≥ 1.10.5)}	1.14.x 1.15.x (K8s v1.26.x) 1.16.x (K8s v1.27.x) 1.28.x⁽⁴⁾^{(≥ 1.11.2)} 1.29.x^{(≥ 1.11.2)}	1.15.x (K8s v1.26.x) 1.16.x (K8s v1.27.x) 1.28.x⁽⁴⁾ 1.29.x^{(≥ 1.12.1)}	1.16.x (K8s v1.27.x) 1.28.x⁽⁴⁾ 1.29.x 1.30.x
EKS	1.24.x 1.25.x 1.26.x 1.27.x^{(≥ 1.10.5)} 1.28.x^{(≥ 1.10.5)}	1.25.x 1.26.x 1.27.x 1.28.x^{(≥ 1.11.2)} 1.29.x^{(≥ 1.11.2)}	1.26.x 1.27.x 1.28.x 1.29.x^{(≥ 1.12.1)}	1.26.x 1.27.x 1.28.x 1.29.x
AKS	1.24.x 1.25.x 1.26.x 1.27.x^{(≥ 1.10.5)} 1.28.x^{(≥ 1.10.5)}	1.25.x 1.26.x 1.27.x 1.28.x^{(≥ 1.11.2)} 1.29.x^{(≥ 1.11.2)}	1.26.x 1.27.x 1.28.x 1.29.x^{(≥ 1.12.1)}	1.26.x 1.27.x 1.28.x 1.29.x
OpenShift	4.11 4.12 4.14^{(≥ 1.10.5)} 4.15^{(≥ 1.10.5)}	4.12 4.13 4.14 4.15^{(≥ 1.11.2)} 4.16^{(≥ 1.11.2)}	4.12 4.13 4.14 4.15 4.16^{(≥ 1.12.1)}	4.12 4.13 4.14 4.15 4.16
Rancher Kubernetes Engine (RKE)	v1.26.2+rke2r1 1.27.x^{(≥ 1.10.5)} 1.28.x^{(≥ 1.10.5)}	v1.26.2+rke2r1 v1.27.x 1.28.x^{(≥ 1.11.2)} 1.29.x^{(≥ 1.11.2)}	v1.26.2+rke2r1 v1.27.x 1.28.x 1.29.x^{(≥ 1.12.1)}	v1.26.2+rke2r1 v1.27.x 1.28.x 1.29.x 1.30.x
VMware Tanzu	N/A	N/A	v1.26.x	v1.26.x
Components	1.10	1.11	1.12	1.13
Cloud Service Mesh	1.17.x⁽³⁾	1.17.x^{(v1.11.0 - v1.11.1)}⁽³⁾ 1.18.x^{(≥ 1.11.2)}⁽³⁾	1.18.x⁽³⁾	1.19.x⁽³⁾
JDK	JDK 11	JDK 11	JDK 11	JDK 11
cert-manager	1.10.x 1.11.x 1.12.x	1.11.x 1.12.x 1.13.x	1.11.x 1.12.x 1.13.x	1.13.x 1.14.x 1.15.x
Cassandra	3.11	3.11	4.0	4.0
Kubernetes	1.24.x 1.25.x 1.26.x	1.25.x 1.26.x 1.27.x	1.26.x 1.27.x 1.28.x 1.29.x	1.27.x 1.28.x 1.29.x 1.30.x
kubectl	1.24.x 1.25.x 1.26.x	1.25.x 1.26.x 1.27.x	1.26.x 1.27.x 1.28.x 1.29.x	1.27.x 1.28.x 1.29.x 1.30.x
Helm	3.10+	3.10+	3.14.2+	3.14.2+
Secret Store CSI driver		1.3.4	1.4.1	1.4.1
Vault		1.13.x	1.15.2	1.15.2
⁽¹⁾ On Anthos on-premises (Google Distributed Cloud) version 1.13, follow these instructions to avoid conflict with `cert-manager`: Conflicting cert-manager installation ⁽²⁾ The official EOL dates for Apigee hybrid versions 1.10 and older have been reached. Regular monthly patches are no longer available. These releases are no longer officially supported except for customers with explicit and official exceptions for continued support. Other customers must upgrade. ⁽³⁾ Cloud Service Mesh is automatically installed with Apigee hybrid 1.9 and newer. ⁽⁴⁾ GKE on AWS version numbers now reflect the Kubernetes versions. See GKE Enterprise version and upgrade support for version details and recommended patches. ⁽⁵⁾ Vault is not certified on Google Distributed Cloud for VMware. ⁽⁶⁾ Support available with Apigee hybrid version 1.10.5 and newer. ⁽⁷⁾ Support available with Apigee hybrid version 1.11.2 and newer. ⁽⁸⁾ Support available with Apigee hybrid version 1.12.1 and newer.

About attached clusters

For Apigee hybrid versions 1.7.x and older, you must use GKE attached clusters if you want to run Apigee hybrid in a multi-cloud context on Elastic Kubernetes Service (EKS), Azure Kubernetes Service (AKS), or another supported third-party Kubernetes service provider. Cluster attachment allows Google to measure the usage of Cloud Service Mesh.

For Apigee hybrid version 1.8.x, GKE attached clusters are required if you are using Cloud Service Mesh for your ingress gateway. If you are using Apigee ingress gateway, attached clusters are optional.

Install the hybrid 1.13.2 runtime

Prepare for the Helm charts upgrade

Pull the Apigee Helm charts.

Apigee hybrid charts are hosted in Google Artifact Registry:

oci://us-docker.pkg.dev/apigee-release/apigee-hybrid-helm-charts

Using the pull command, copy all of the Apigee hybrid Helm charts to your local storage with the following command:

export CHART_REPO=oci://us-docker.pkg.dev/apigee-release/apigee-hybrid-helm-charts
export CHART_VERSION=1.13.2
helm pull $CHART_REPO/apigee-operator --version $CHART_VERSION --untar
helm pull $CHART_REPO/apigee-datastore --version $CHART_VERSION --untar
helm pull $CHART_REPO/apigee-env --version $CHART_VERSION --untar
helm pull $CHART_REPO/apigee-ingress-manager --version $CHART_VERSION --untar
helm pull $CHART_REPO/apigee-org --version $CHART_VERSION --untar
helm pull $CHART_REPO/apigee-redis --version $CHART_VERSION --untar
helm pull $CHART_REPO/apigee-telemetry --version $CHART_VERSION --untar
helm pull $CHART_REPO/apigee-virtualhost --version $CHART_VERSION --untar

Upgrade cert-manager if needed.
If you need to upgrade your cert-manager version, install the new version with the following command:
```
kubectl apply -f https://github.com/cert-manager/cert-manager/releases/download/v1.15.1/cert-manager.yaml
```
See Supported platforms and versions: cert-manager for a list of supported versions.
If your Apigee namespace is not apigee, edit the apigee-operator/etc/crds/default/kustomization.yaml file and replace the namespace value with your Apigee namespace.
```
apiVersion: kustomize.config.k8s.io/v1beta1
kind: Kustomization

namespace: APIGEE_NAMESPACE
```
If you are using apigee as your namespace you do not need to edit the file.

Install the updated Apigee CRDs:

Note: This is the only supported method for installing Apigee CRDs. Do not use kubectl apply without -k, do not omit --server-side.

Use the kubectl dry-run feature by running the following command:

kubectl apply -k  apigee-operator/etc/crds/default/ --server-side --force-conflicts --validate=false --dry-run=server

After validating with the dry-run command, run the following command:

kubectl apply -k  apigee-operator/etc/crds/default/ \
  --server-side \
  --force-conflicts \
  --validate=false

Validate the installation with the kubectl get crds command:

kubectl get crds | grep apigee

Your output should look something like the following:

apigeedatastores.apigee.cloud.google.com                    2024-08-21T14:48:30Z
apigeedeployments.apigee.cloud.google.com                   2024-08-21T14:48:30Z
apigeeenvironments.apigee.cloud.google.com                  2024-08-21T14:48:31Z
apigeeissues.apigee.cloud.google.com                        2024-08-21T14:48:31Z
apigeeorganizations.apigee.cloud.google.com                 2024-08-21T14:48:32Z
apigeeredis.apigee.cloud.google.com                         2024-08-21T14:48:33Z
apigeerouteconfigs.apigee.cloud.google.com                  2024-08-21T14:48:33Z
apigeeroutes.apigee.cloud.google.com                        2024-08-21T14:48:33Z
apigeetelemetries.apigee.cloud.google.com                   2024-08-21T14:48:34Z
cassandradatareplications.apigee.cloud.google.com           2024-08-21T14:48:35Z

Migrate apigee-operator from the apigee-system namespace to APIGEE_NAMESPACE.

Annotate the clusterIssuer with the new namespace

kubectl annotate --overwrite clusterIssuer apigee-ca-issuer meta.helm.sh/release-namespace='APIGEE_NAMESPACE'

If you are changing the release name for apigee-operator, annotate the clusterIssuer with the new release name.

kubectl annotate --overwrite clusterIssuer apigee-ca-issuer meta.helm.sh/release-name='APIGEE_OPERATOR_RELEASE_NAME'

Update the replicas of your existing Apigee Operator deployment in the apigee-system namespace to 0 (zero) to avoid the two controllers reconciling.
```
kubectl scale deployment apigee-controller-manager -n apigee-system --replicas=0
```

Update the replicas of your existing Apigee Operator deployment in the apigee-system namespace to 0 (zero) to avoid the two controllers reconciling.

kubectl delete mutatingwebhookconfiguration apigee-mutating-webhook-configuration
kubectl delete validatingwebhookconfiguration apigee-validating-webhook-configuration

Check the labels on the cluster nodes. By default, Apigee schedules data pods on nodes with the label cloud.google.com/gke-nodepool=apigee-data and runtime pods are scheduled on nodes with the label cloud.google.com/gke-nodepool=apigee-runtime. You can customize your node pool labels in the overrides.yaml file.

For more information, see Configuring dedicated node pools.

Install the Apigee hybrid Helm charts

Note: Before executing any of the Helm upgrade/install commands, use the Helm dry-run feature by adding --dry-run at the end of the command. See helm -h to list supported commands, options, and usage.

If you have not, navigate into your APIGEE_HELM_CHARTS_HOME directory. Run the following commands from that directory.

Upgrade the Apigee Operator/Controller:

Note: This step requires elevated cluster permissions. Run helm -h or helm upgrade -h for details.

Dry run:

helm upgrade operator apigee-operator/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE \
  --dry-run

Upgrade the chart:

helm upgrade operator apigee-operator/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE

Verify Apigee Operator installation:

helm ls -n APIGEE_NAMESPACE

NAME       NAMESPACE       REVISION   UPDATED                                STATUS     CHART                   APP VERSION
operator   apigee   3          2024-08-21 00:42:44.492009 -0800 PST   deployed   apigee-operator-1.13.2   1.13.2

Verify it is up and running by checking its availability:

kubectl -n APIGEE_NAMESPACE get deploy apigee-controller-manager

NAME                        READY   UP-TO-DATE   AVAILABLE   AGE
apigee-controller-manager   1/1     1            1           7d20h

Upgrade the Apigee datastore:

Dry run:

helm upgrade datastore apigee-datastore/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE \
  --dry-run=server

Upgrade the chart:

helm upgrade datastore apigee-datastore/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE

Verify apigeedatastore is up and running by checking its state:

kubectl -n APIGEE_NAMESPACE get apigeedatastore default

NAME      STATE       AGE
default   running    2d

Upgrade Apigee telemetry:

Dry run:

helm upgrade telemetry apigee-telemetry/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE \
  --dry-run

Upgrade the chart:

helm upgrade telemetry apigee-telemetry/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE

Verify it is up and running by checking its state:

kubectl -n APIGEE_NAMESPACE get apigeetelemetry apigee-telemetry

NAME               STATE     AGE
apigee-telemetry   running   2d

Upgrade Apigee Redis:

Dry run:

helm upgrade redis apigee-redis/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE \
  --dry-run

Upgrade the chart:

helm upgrade redis apigee-redis/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE

Verify it is up and running by checking its state:

kubectl -n APIGEE_NAMESPACE get apigeeredis default

NAME      STATE     AGE
default   running   2d

Upgrade Apigee ingress manager:

Dry run:

helm upgrade ingress-manager apigee-ingress-manager/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE \
  --dry-run

Upgrade the chart:

helm upgrade ingress-manager apigee-ingress-manager/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE

Verify it is up and running by checking its availability:

kubectl -n APIGEE_NAMESPACE get deployment apigee-ingressgateway-manager

NAME                            READY   UP-TO-DATE   AVAILABLE   AGE
apigee-ingressgateway-manager   2/2     2            2           2d

Upgrade the Apigee organization:

Dry run:

helm upgrade ORG_NAME apigee-org/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE \
  --dry-run

Upgrade the chart:

helm upgrade ORG_NAME apigee-org/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  -f OVERRIDES_FILE

Verify it is up and running by checking the state of the respective org:

kubectl -n APIGEE_NAMESPACE get apigeeorg

NAME                      STATE     AGE
apigee-org1-xxxxx          running   2d

Note: If the upgrade command fails with the error Forbidden: state: releasing, the existing components are still in releasing status. You can wait for the current update to complete and then retry. Check release status with the following command:

kubectl get org -n APIGEE_NAMESPACE

Upgrade the environment.
You must install one environment at a time. Specify the environment with --set env=ENV_NAME.

Dry run:
```
helm upgrade ENV_RELEASE_NAME apigee-env/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  --set env=ENV_NAME \
  -f OVERRIDES_FILE \
  --dry-run
```
- ENV_RELEASE_NAME is the name with which you previously installed the apigee-env chart. In hybrid v1.10, it is usually apigee-env-ENV_NAME. In Hybrid v1.11 and newer it is usually ENV_NAME.
- ENV_NAME is the name of the environment you are upgrading.
- OVERRIDES_FILE is your new overrides file for v.1.13.2
Upgrade the chart:
```
helm upgrade ENV_RELEASE_NAME apigee-env/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  --set env=ENV_NAME \
  -f OVERRIDES_FILE
```
Verify it is up and running by checking the state of the respective env:
```
kubectl -n APIGEE_NAMESPACE get apigeeenv
```
```
NAME                          STATE       AGE   GATEWAYTYPE
apigee-org1-dev-xxx            running     2d
```

kubectl get env -n APIGEE_NAMESPACE

Upgrade the environment groups (virtualhosts).
1. You must upgrade one environment group (virtualhost) at a time. Specify the environment group with --set envgroup=ENV_GROUP_NAME. Repeat the following commands for each environment group mentioned in the overrides.yaml file:
  Dry run:
```
helm upgrade ENV_GROUP_RELEASE_NAME apigee-virtualhost/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  --set envgroup=ENV_GROUP_NAME \
  -f OVERRIDES_FILE \
  --dry-run
```
  ENV_GROUP_RELEASE_NAME is the name with which you previously installed the apigee-virtualhost chart. In hybrid v1.10, it is usually apigee-virtualhost-ENV_GROUP_NAME. In Hybrid v1.11 and newer it is usually ENV_GROUP_NAME.
  
  Upgrade the chart:
```
helm upgrade ENV_GROUP_RELEASE_NAME apigee-virtualhost/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  --set envgroup=ENV_GROUP_NAME \
  -f OVERRIDES_FILE
```
  Note: ENV_GROUP_RELEASE_NAME must be unique within the apigee namespace.
  For example, if you have an environment named prod and an environment group named prod, set the value of ENV_GROUP_RELEASE_NAME to something unique, like prod-envgroup.
2. Check the state of the ApigeeRoute (AR).
  Installing the virtualhosts creates ApigeeRouteConfig (ARC) which internally creates ApigeeRoute (AR) once the Apigee watcher pulls environment group-related details from the control plane. Therefore, check that the corresponding AR's state is running:
```
kubectl -n APIGEE_NAMESPACE get arc
```
```
NAME                                STATE   AGE
apigee-org1-dev-egroup                       2d
```
```
kubectl -n APIGEE_NAMESPACE get ar
```
```
NAME                                        STATE     AGE
apigee-org1-dev-egroup-xxxxxx                running   2d
```
After you have verified all the installations are upgraded successfully, delete the older apigee-operator release from the apigee-system namespace.
1. Uninstall the old operator release:
```
helm delete operator -n apigee-system
```
2. Delete the apigee-system namespace:
```
kubectl delete namespace apigee-system
```

Upgrade operator again in your Apigee namespace to re-install the deleted cluster-scoped resources:

helm upgrade operator apigee-operator/ \
  --install \
  --namespace APIGEE_NAMESPACE \
  --atomic \
  -f overrides.yaml

Rolling back to a previous version

To roll back to the previous version, use the older chart version to roll back the upgrade process in the reverse order. Start with apigee-virtualhost and work your way back to apigee-operator, and then revert the CRDs.

Because of the change in the namespace for apigee-operator, you need to perform extra steps to delete the Validating and Mutating admission hooks. That way, when you install the apigee-operator back in the apigee-system namespace, they will be recreated to point to the correct Apigee Operator endpoint.

Tip: If you know the last release version, you can use the helm rollback command rather than the helm upgrade command described below.

Update the replicas of the existing Apigee Operator deployment in Apigee to 0 (zero) to avoid the two controllers reconciling the Custom Resources to avoid conflicts when rolling it back in the apigee-system namespace.

kubectl scale deployment apigee-controller-manager -n APIGEE_NAMESPACE --replicas=0

kubectl delete mutatingwebhookconfiguration \
  apigee-mutating-webhook-configuration-APIGEE_NAMESPACE

kubectl delete validatingwebhookconfiguration \
  apigee-validating-webhook-configuration-APIGEE_NAMESPACE

Revert all the charts from apigee-virtualhost to apigee-datastore. The following commands assume you are using the charts from the previous version (v1.12.x).

Run the following command for each environment group:

helm upgrade ENV_GROUP_RELEASE_NAME apigee-virtualhost/ \
  --install \
  --namespace apigee \
  --atomic \
  --set envgroup=ENV_GROUP_NAME \
  -f 1.12_OVERRIDES_FILE

Run the following command for each environment:

helm upgrade ENV_RELEASE_NAME apigee-env/ \
  --install \
  --namespace apigee \
  --atomic \
  --set env=ENV_NAME \
  -f 1.12_OVERRIDES_FILE

Revert the remaining charts except for apigee-operator.

helm upgrade ORG_NAME apigee-org/ \
  --install \
  --namespace apigee \
  --atomic \
  -f 1.12_OVERRIDES_FILE

helm upgrade ingress-manager apigee-ingress-manager/ \
  --install \
  --namespace apigee \
  --atomic \
  -f 1.12_OVERRIDES_FILE

helm upgrade redis apigee-redis/ \
  --install \
  --namespace apigee \
  --atomic \
  -f 1.12_OVERRIDES_FILE

helm upgrade telemetry apigee-telemetry/ \
  --install \
  --namespace apigee \
  --atomic \
  -f 1.12_OVERRIDES_FILE

helm upgrade datastore apigee-datastore/ \
  --install \
  --namespace apigee \
  --atomic \
  -f 1.12_OVERRIDES_FILE

Create the apigee-system namespace.
```
kubectl create namespace apigee-system
```

Patch the resource annotation back to the apigee-system namespace.

kubectl annotate --overwrite clusterIssuer apigee-ca-issuer meta.helm.sh/release-namespace='apigee-system'

If you have changed the release name as well, update the annotation with the operator release name.

kubectl annotate --overwrite cluseterIssuer apigee-ca-issuer meta.helm.sh/release-name='operator'

Install apigee-operator back into the apigee-system namespace.

helm upgrade operator apigee-operator/ \
  --install \
  --namespace apigee-system \
  --atomic \
  -f 1.12_OVERRIDES_FILE

Revert the CRDs by reinstalling the older CRDs.

kubectl apply -k apigee-operator/etc/crds/default/ \
  --server-side \
  --force-conflicts \
  --validate=false

Clean up the apigee-operator release from the APIGEE_NAMESPACE namespace to complete the rollback process.
```
helm uninstall operator -n APIGEE_NAMESPACE
```
Some cluster-scoped resources, such as clusterIssuer, are deleted when operator is uninstalled. Reinstall them with the following command:
```
helm upgrade operator apigee-operator/ \
  --install \
  --namespace apigee-system \
  --atomic \
  -f 1.12_OVERRIDES_FILE
```

Upgrading Apigee hybrid to version 1.13

Changes from Apigee hybrid v1.12

Prerequisites

Upgrading to version 1.13.2 overview

Prepare to upgrade to version 1.13

Back up your hybrid installation

Linux

Mac OS

Windows

Prod

Non-prod

Upgrade your Kubernetes version

Click to expand a list of supported platforms

Components

About attached clusters

Install the hybrid 1.13.2 runtime

Prepare for the Helm charts upgrade

Install the Apigee hybrid Helm charts

Rolling back to a previous version