Terraform: Automated VM deployment for SAP NetWeaver on Linux

This guide uses Terraform to deploy all of the required Google Cloud resources to run SAP NetWeaver on Linux, including the Compute Engine virtual machine (VM), the Linux operating system, and the persistent disks. You define the values for the installation, such as machine type, resource names, disk sizes, and so forth, in a Terraform configuration file.

If your SAP NetWeaver installation requires more control over the deployment process than the Terraform configuration file provides, see Manual VM deployment for SAP NetWeaver on Linux.

To deploy a VM that is running Windows, see the Windows deployment guide.

VM configuration deployed by these instructions

The VM that is deployed by these instructions is for use in a 3-tier configuration, where SAP NetWeaver runs on one VM and the database server runs on another.

To set up a 2-tier configuration, where SAP NetWeaver runs on the same VM as the database server, you deploy the database server first and create the VM and the required disk drives for both the database server and for SAP NetWeaver at that time. You then install SAP NetWeaver on the same VM as the database server.

For instructions about deploying the VM for a database server, see the database deployment guide for your database server.

Google Cloud resources deployed by these instructions

The Google Cloud resources that are deployed by Terraform configuration file include:

  • A VM that uses an SAP-certified version of Linux.
  • A persistent disk for the boot disk.
  • A persistent disk for SAP binaries.
  • A persistent disk for swap space.
  • The recommended APIs.
  • Google Cloud's Agent for SAP.

The following instructions use Cloud Shell, but if you prefer, you can use the Google Cloud CLI in your local terminal instead.

For more details on planning your implementation, see the Planning guide. For an overview of IT ops for your system, see the Operations guide.

Creating a project

If you require your SAP workload to run in compliance with data residency, access control, support personnel, or regulatory requirements, then you must create the required Assured Workloads folder. For more information, see Compliance and sovereign controls for SAP on Google Cloud.

To create a project:

  1. Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.
  2. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

    Go to project selector

  3. Make sure that billing is enabled for your Google Cloud project.

  4. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

    Go to project selector

  5. Make sure that billing is enabled for your Google Cloud project.

Configuring the gcloud command environment

These instructions use Cloud Shell to enter gcloud commands that deploy or configure your Google Cloud resources. Cloud Shell is accessed through the Google Cloud console in your browser.

Cloud Shell runs on a VM that Google Cloud provisions each time you start Cloud Shell. The first time you use Cloud Shell, Google Cloud also creates a persistent $HOME directory for you, which is restored each time you open Cloud Shell.

The provisioned VM includes the latest Google Cloud CLI. Therefore, the gcloud commands that you use in Cloud Shell are the same as those you would use in a locally installed instance of the gcloud CLI.

If you have the gcloud CLI installed, you can issue the gcloud commands that are used in these instructions from your local machine. However, with a locally installed gcloud CLI you must always make sure that you are using the latest version of the gcloud CLI.

Whether you use Cloud Shell or gcloud CLI, you can set and change the properties of your gcloud command environment and save them as a configuration. Configurations are collections of key-value pairs that influence the behavior of the gcloud commands.

Some basic actions you can take with a configuration in Cloud Shell include:

  • Initialize a configuration:

    gcloud init
  • Check the settings of your current gcloud configuration:

    gcloud config list
  • Switch to the required Google Cloud project. Replace PROJECT_ID with your Google Cloud project ID.

    gcloud config set project PROJECT_ID
  • Set a default region. Replace REGION with a Google Cloud region.

    gcloud config set compute/region REGION
  • Set a default zone. Replace ZONE with a Google Cloud zone.

    gcloud config set compute/zone ZONE
  • Create a new configuration. Replace NAME with the name for the configuration.

    gcloud config configurations create NAME

For more information about working with configurations, see Managing gcloud CLI configurations.

Creating a network

For security purposes, create a new network. You can control who has access by adding firewall rules or by using another access control method.

If your project has a default VPC network, don't use it. Instead, create your own VPC network so that the only firewall rules in effect are those that you create explicitly.

During deployment, VM instances typically require access to the internet to download Google Cloud's Agent for SAP. If you are using one of the SAP-certified Linux images that are available from Google Cloud, the VM instance also requires access to the internet in order to register the license and to access OS vendor repositories. A configuration with a NAT gateway and with VM network tags supports this access, even if the target VMs do not have external IPs.

To create a VPC network for your project, complete the following steps:

  1. Create a custom mode network. For more information, see Creating a custom mode network.

  2. Create a subnetwork, and specify the region and IP range. For more information, see Adding subnets.

Setting up a NAT gateway

If you need to create one or more VMs without public IP addresses, you need to use network address translation (NAT) to enable the VMs to access the internet. Use Cloud NAT, a Google Cloud distributed, software-defined managed service that lets VMs send outbound packets to the internet and receive any corresponding established inbound response packets. Alternatively, you can set up a separate VM as a NAT gateway.

To create a Cloud NAT instance for your project, see Using Cloud NAT.

After you configure Cloud NAT for your project, your VM instances can securely access the internet without a public IP address.

Adding firewall rules

By default, incoming connections from outside your Google Cloud network are blocked. To allow incoming connections, set up a firewall rule for your VM. Firewall rules regulate only new incoming connections to a VM. After a connection is established with a VM, traffic is permitted in both directions over that connection.

You can create a firewall rule to allow access to specified ports, or to allow access between VMs on the same subnetwork.

Create firewall rules to allow access for such things as:

  • The default ports used by SAP NetWeaver, as documented in TCP/IP Ports of All SAP Products.
  • Connections from your computer or your corporate network environment to your Compute Engine VM instance. If you are unsure of what IP address to use, talk to your company's network admin.
  • Communication between VMs in a 3-tier, scaleout, or high-availability configuration. For example, if you are deploying a 3-tier system, you will have at least 2 VMs in your subnetwork: the VM for SAP NetWeaver, and another VM for the database server. To enable communication between the two VMs, you must create a firewall rule to allow traffic that originates from the subnetwork.
  • SSH connections to your VM instance, including SSH from the browser, through port 22.
  • Connections to your VM instance from third-party tools, such as a local terminal or PuTTY. Create a rule to allow access for the tool through your firewall. For more information, see Connect to Linux VMs using third-party tools.

To create the firewall rules for your project, see Creating firewall rules.

Deploying a Linux VM for SAP NetWeaver with Terraform

The following instructions use Cloud Shell to deploy a VM instance with Linux and all of the persistent disks that SAP NetWeaver requires.

Deployment procedure

  1. Open Cloud Shell.

    Go to Cloud Shell

  2. Download the sap_nw.tf configuration file to your working directory:

    wget https://storage.googleapis.com/cloudsapdeploy/terraform/latest/terraform/sap_nw/terraform/sap_nw.tf

  3. Open the sap_nw.tf file in the Cloud Shell code editor.

    To open the Cloud Shell code editor, click the pencil icon in the upper right corner of the Cloud Shell terminal window.

  4. In the sap_nw.tf file, update the argument values by replacing the contents inside the double quotation marks with the values for your installation. The arguments are described in the following table.

    Argument Data type Description
    source String

    Specifies the location and version of the Terraform module to use during deployment.

    The sap_nw.tf configuration file includes two instances of the source argument: one that is active and one that is included as a comment. The source argument that is active by default specifies latest as the module version. The second instance of the source argument, which by default is deactivated by a leading # character, specifies a timestamp that identifies a module version.

    If you need all of your deployments to use the same module version, then remove the leading # character from the source argument that specifies the version timestamp and add it to the source argument that specifies latest.

    project_id String Specify the ID of your Google Cloud project in which you are deploying this system. For example, my-project-x.
    zone String

    Specify the zone in which you are deploying your SAP system. The zone must be in the same region that you selected for your subnet.

    For example, if your subnet is deployed in the us-central1 region, then you can specify a zone such as us-central1-a.

    machine_type String Specify the type of Compute Engine virtual machine (VM) on which you need to run your SAP system. If you need a custom VM type, then specify a predefined VM type with a number of vCPUs that is closest to the number you need while still being larger. After deployment is complete, modify the number of vCPUs and the amount of memory.

    For example, n1-highmem-32.

    subnetwork String Specify the name of the subnetwork that you created in a previous step. If you are deploying to a shared VPC, then specify this value as SHARED_VPC_PROJECT_ID/SUBNETWORK. For example, myproject/network1.
    linux_image String Specify the name of the Linux operating system image on which you want to deploy your SAP system. For example, rhel-9-2-sap-ha or sles-15-sp5-sap. For the list of available operating system images, see the Images page in the Google Cloud console.
    linux_image_project String Specify the Google Cloud project that contains the image that you have specified for the argument linux_image. This project might be your own project or a Google Cloud image project. For a Compute Engine image, specify either rhel-sap-cloud or suse-sap-cloud. To find the image project for your operating system, see Operating system details.
    usr_sap_size Integer Optional. Specify the size of the /usr/sap disk in GB. The minimum size is 8 GB. The default value is 8.
    sap_mnt_size Integer Optional. Specify the size of the /sapmnt disk in GB. The minimum size is 8 GB. The default value is 8.
    swap_size Integer Optional. Specify the size of the swap volume in GB. The minimum size is 8 GB. The default value is 8.
    network_tags String Optional. Specify one or more comma-separated network tags that you want to associate with your VM instances for firewall or routing purposes.

    If you specify public_ip = false and do not specify a network tag, then make sure to provide another means of access to the internet.

    public_ip Boolean Optional. Determines whether or not a public IP address is added to your VM instance. The default value is true.
    service_account String Optional. Specify the email address of a user-managed service account to be used by the host VMs and by the programs that run on the host VMs. For example, svc-acct-name@project-id.iam.gserviceaccount.com.

    If you specify this argument without a value, or omit it, then the installation script uses the Compute Engine default service account. For more information, see Identity and access management for SAP programs on Google Cloud.

    sap_deployment_debug Boolean Optional. Only when Cloud Customer Care asks you to enable debugging for your deployment, specify true, which makes the deployment generate verbose deployment logs. The default value is false.
    reservation_name String Optional. To use a specific Compute Engine VM reservation for this deployment, specify the name of the reservation. By default, the installation script selects any available Compute Engine reservation based on the following conditions.

    For a reservation to be usable, regardless of whether you specify a name or the installation script selects it automatically, the reservation must be set with the following:

    • The specificReservationRequired option is set to true or, in the Google Cloud console, the Select specific reservation option is selected.
    • Some Compute Engine machine types support CPU platforms that are not covered by the SAP certification of the machine type. If the target reservation is for any of the following machine types, then the reservation must specify the minimum CPU platforms as indicated:
      • n1-highmem-32: Intel Broadwell
      • n1-highmem-64: Intel Broadwell
      • n1-highmem-96: Intel Skylake
      • m1-megamem-96: Intel Skylake
    • The minimum CPU platforms for all of the other machine types that are certified by SAP for use on Google Cloud conform to the SAP minimum CPU requirement.
    can_ip_forward Boolean

    Specify whether sending and receiving of packets with non-matching source or destination IPs is allowed, which enables a VM to act like a router. The default value is true.

    If you only intend to use Google's internal load balancers to manage virtual IPs for the deployed VMs, then set the value to false. An internal load balancer is automatically deployed as part of high availability templates.

    The following configuration file creates a VM that is configured to run SAP NetWeaver. The configuration file deploys an n1-standard-16 VM that is running a SLES 15 SP3 operating system. The VM includes all of the directories that are required in order to run SAP NetWeaver.

      # ...
      module "sap_nw" {
      source = "https://storage.googleapis.com/cloudsapdeploy/terraform/latest/terraform/sap_nw/sap_nw_module.zip"
      #
      # By default, this source file uses the latest release of the terraform module
      # for SAP on Google Cloud.  To fix your deployments to a specific release
      # of the module, comment out the source property above and uncomment the source property below.
      #
      # source = "https://storage.googleapis.com/cloudsapdeploy/terraform/YYYYMMDDHHMM/terraform/sap_nw/sap_nw_module.zip"
      #
      # ...
      #
      project_id = "example-project-123456"
      zone = "us-central1-f"
      machine_type = "n1-standard-16"
      subnetwork = "example-sub-network-sap"
      linux_image = "sles-15-sp3-sap"
      linux_image_project = "suse-sap-cloud"
    
      instance_name = "ex-vm-nw-lin"
      # ...
      usr_sap_size = 15
      sap_mnt_size = 15
      swap_size = 24
      # ...
      }
  5. To initialize your current working directory and download the Terraform provider plugin and module files for Google Cloud:

    terraform init

    The terraform init command prepares your working directory for other Terraform commands.

    To force a refresh of the provider plugin and configuration files in your working directory, specify the --upgrade flag. If the --upgrade flag is omitted and you don't make any changes in your working directory, Terraform uses the locally cached copies, even if latest is specified in the source URL.

    terraform init --upgrade 
  6. Optionally, to create the Terraform execution plan:

    terraform plan

    The terraform plan command shows the changes required by your current configuration. If you skip this step, the terraform apply command automatically creates a new plan and prompts you to approve it.

  7. To apply the execution plan:

    terraform apply

    When you are prompted to approve the actions, enter yes.

    The terraform apply command sets up the Google Cloud infrastructure according to the arguments defined in the Terraform configuration file. The process can take a few minutes. To check the progress of your deployment, follow the steps in the next section.

  8. After the VM instance deploys, if you need Compute Engine to save the boot disk in the event the VM instance is deleted:

    1. In the Google Cloud console, go to the VM Instances page.

      Go to VM instances

    2. To open the VM instance details page for your VM instance, click the name of the VM instance.

    3. Click Edit.

    4. In the Boot disk section, for the Deletion rule, ensure that the Keep disk option is selected.

    5. Click Save.

Verifying deployment

To verify deployment, you check the deployment logs in Cloud Logging and check the configuration of the VM.

Check the logs

  1. In the Google Cloud console, open Cloud Logging to monitor installation progress and check for errors.

    Go to Cloud Logging

  2. Filter the logs:

    Logs Explorer

    1. In the Logs Explorer page, go to the Query pane.

    2. From the Resource drop-down menu, select Global, and then click Add.

      If you don't see the Global option, then in the query editor, enter the following query:

      resource.type="global"
      "Deployment"
      
    3. Click Run query.

    Legacy Logs Viewer

    • In the Legacy Logs Viewer page, from the basic selector menu, select Global as your logging resource.
  3. Analyze the filtered logs:

    • If "--- Finished" is displayed, then the deployment processing is complete and you can proceed to the next step.
    • If you see a quota error:

      1. On the IAM & Admin Quotas page, increase any of your quotas that do not meet the SAP NetWeaver requirements that are listed in the SAP NetWeaver planning guide.

      2. Open Cloud Shell.

        Go to Cloud Shell

      3. Go to your working directory and delete the deployment to clean up the VMs and persistent disks from the failed installation:

        terraform destroy

        When you are prompted to approve the action, enter yes.

      4. Rerun your deployment.

Check the configuration of the VM

  1. After the VM instance deploys, connect to your VM by using ssh.

    1. If you haven't already done so, create a firewall rule to allow an SSH connection on port 22.
    2. Go to the VM Instances page.

      Go to VM instances

    3. Click SSH for your VM instance, or you can use your preferred SSH method.

      SSH button on Compute Engine VM instances page.

  2. Change to the root user.

    sudo su -
  3. At the command prompt, enter df -h. Ensure that you see output similar to the following.

    Data volumes created by the script.

  4. Confirm that the swap directory was created:

    cat /proc/meminfo | grep Swap

    You see results similar to the following example:

    Example of terminal output when the swap directory exists.

  5. If you are using RHEL for SAP 9.0 or later, then make sure that the packages chkconfig and compat-openssl11 are installed on your VM instance.

    For more information from SAP, see SAP Note 3108316 - Red Hat Enterprise Linux 9.x: Installation and Configuration .

If any of the validation steps show that the installation failed:

  1. Correct the error.

  2. Open Cloud Shell.

    Go to Cloud Shell

  3. Go to the directory that contains the Terraform configuration file.

  4. Delete the deployment:

    terraform destroy

    When you are prompted to approve the action, enter yes.

  5. Rerun your deployment.

Connecting to your VM

If you have defined a firewall rule that allows access on port 22, you can connect to a Linux VM using common SSH tools.

You can connect through the Google Cloud console or you can connect from a terminal by using a gcloud command.

Console

To connect by using ssh directly from your browser in the Google Cloud console:

  1. In the Google Cloud console, go to the VM instances page.

    Go to VM instances

  2. In the list of virtual machine instances, click SSH in the row of the instance that you want to connect to.

    SSH button next to instance name.

gcloud

The Google Cloud CLI manages your SSH keys for you by generating and applying new project-wide SSH keys when you need them.

Connect to your VM instance:

gcloud compute --project "[VM_PROJECT_ID]" ssh --zone "[VM_ZONE]" "[VM_NAME]"

where:

  • [VM_PROJECT_ID] is the ID of the Google Cloud project in which you have created your VM.
  • [VM_ZONE] is the zone in which you have located your VM.
  • [VM_NAME] is the name of your VM instance.

After you submit this command, the terminal is connected to your VM on Google Cloud and you can run commands on your Linux VM. When you are done, use the exit command to disconnect from the VM.

You can also generate a new key-pair for your Linux VM and apply it to your project, which allows you to connect using third-party tools such as PuTTY on Windows workstations. For more details, see Create SSH keys.

Other connection options, which aren't discussed here, are also possible.

For more detailed information about connecting to a Linux VM on Google Cloud, see Connecting to Linux instances.

Setting up the database

If you haven't yet deployed your database on Google Cloud, follow the instructions for setting up your database in both the Google Cloud deployment guide for your database, and in the database documentation that is provided by your database vendor.

Google Cloud provides deployment guides for the following SAP-certified databases:

When SAP NetWeaver and the database server are running on different VMs in a 3-tier architecture, make sure that your firewall rules are defined to allow communication between the VMs.

Installing the Cloud Logging agent

The Cloud Logging agent provides you with a solution for Google Cloud system-activity logging, including operating system events and, if you are using SAP HANA, SAP HANA events. The Cloud Logging agent is an optional but recommended component. See the SAP NetWeaver on Google Cloud operations guide for more information about Google Cloud logging.

To install the Cloud Logging agent in your new VM, see the instructions for Linux and Windows in Installing the agent.

Installing SAP NetWeaver

For instructions on installing SAP NetWeaver on your new VM, see the SAP help portal and the SAP NetWeaver Master Guide.

After you install SAP NetWeaver:

  1. Update the SAP kernel to the minimum supported patch level.

    For details on the supported SAP kernel patch levels, see SAP Note 2446441 - Linux on Google Cloud (IaaS): Adaptation of your SAP License.

  2. Install your permanent SAP NetWeaver license.

    For more information from SAP about managing your SAP NetWeaver licenses, see SAP Licensing Procedure.

Installing the SAP Host Agent

The SAP Host Agent has been enhanced for running on Google Cloud. Ensure that you run at least the minimum SAP Host Agent version required for the Google Cloud environment.

For details, refer to the following SAP Notes:

Validate your installation of Google Cloud's Agent for SAP

After you have deployed a VM and installed your SAP system, validate that Google Cloud's Agent for SAP is functioning properly.

Verify that Google Cloud's Agent for SAP is running

To verify that the agent is running, follow these steps:

  1. Establish an SSH connection with your host VM instance.

  2. Run the following command:

    systemctl status google-cloud-sap-agent

    If the agent is functioning properly, then the output contains active (running). For example:

    google-cloud-sap-agent.service - Google Cloud Agent for SAP
    Loaded: loaded (/usr/lib/systemd/system/google-cloud-sap-agent.service; enabled; vendor preset: disabled)
    Active:  active (running)  since Fri 2022-12-02 07:21:42 UTC; 4 days ago
    Main PID: 1337673 (google-cloud-sa)
    Tasks: 9 (limit: 100427)
    Memory: 22.4 M (max: 1.0G limit: 1.0G)
    CGroup: /system.slice/google-cloud-sap-agent.service
           └─1337673 /usr/bin/google-cloud-sap-agent
    

If the agent isn't running, then restart the agent.

Verify that SAP Host Agent is receiving metrics

To verify that the infrastructure metrics are collected by Google Cloud's Agent for SAP and sent correctly to the SAP Host Agent, follow these steps:

  1. In your SAP system, enter transaction ST06.
  2. In the overview pane, check the availability and content of the following fields for the correct end-to-end setup of the SAP and Google monitoring infrastructure:

    • Cloud Provider: Google Cloud Platform
    • Enhanced Monitoring Access: TRUE
    • Enhanced Monitoring Details: ACTIVE

Evaluate your SAP NetWeaver workload

To automate continuous validation checks for your SAP NetWeaver workloads running on Google Cloud, you can use Workload Manager.

Workload Manager allows you to automatically scan and evaluate your SAP NetWeaver workloads against best practices from SAP, Google Cloud, and OS vendors. This helps improve the quality, performance, and reliability of your workloads.

For information about the best practices that Workload Manager supports for evaluating SAP NetWeaver workloads running on Google Cloud, see Workload Manager best practices for SAP. For information about creating and running an evaluation using Workload Manager, see Create and run an evaluation.

Troubleshooting

This section contains information about how to correct common issues.

Troubleshooting communication problems to the database server

If you are setting up a 3-tier SAP system and having connection issues between your VMs, ensure that you have created a firewall rule to allow traffic between VMs on your subnetwork.

Troubleshooting connecting to your VM

If you are having issues connecting to your VM through ssh, ensure that you have created a firewall rule to open port 22 on the Google Cloud network you are using.

For other possible issues, see Known issues for SSH from the browser.

Troubleshooting Google Cloud's Agent for SAP

To troubleshoot Google Cloud's Agent for SAP, see the Google Cloud's Agent for SAP troubleshooting guide.