CMEK, VPC-SC 또는 FIPS 140-2 검증된 암호화를 사용하도록 구성된 Looker (Google Cloud 핵심 서비스) 인스턴스에서는 Looker 보고서가 지원되지 않습니다.
Looker 관리자 역할이 아닌 IAM을 통한 관리자 역할이 부여된 Looker (Google Cloud 핵심 서비스) 사용자는 보고서를 만들거나 볼 수 없습니다. 보고서 사용량을 사용 설정하려면 관리 패널의 Looker 역할 페이지에서 이러한 사용자에게 Looker 관리자 역할을 할당하세요.
사용자가 2차 인증을 사용하여 Looker 인스턴스에 로그인하면 Looker 보고서를 사용할 수 없습니다.
Looker 보고서를 다시 사용 설정하면 일부 보고서가 복구된 보고서 폴더에 표시될 수 있습니다. 이 문제는 일반적으로 보고서의 원래 폴더가 삭제되었거나 폴더의 권한이 변경된 경우에 발생합니다. 관리자는 복구된 보고서 폴더에서 다른 폴더로 이러한 보고서를 이동하거나 보고서를 삭제할 수 있습니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-08(UTC)"],[],[],null,["# Enabling and disabling Looker reports\n\n| **Preview**\n|\n|\n| This product or feature is subject to the \"Pre-GA Offerings Terms\" in the General Service Terms section\n| of the [Service Specific Terms](/terms/service-terms#1).\n|\n| Pre-GA products and features are available \"as is\" and might have limited support.\n|\n| For more information, see the\n| [launch stage descriptions](/products#product-launch-stages).\n\nThis document provides guidance for enabling Looker reports on your Looker (original) or Looker (Google Cloud core) instance.\n| **Important:** By enabling Looker reports, you agree to the [Google Cloud Platform Terms of Service](https://cloud.google.com/terms). Use of Looker reports are subject to the agreement under which you use Google Cloud, not your Looker agreement.\n| **Important:** Don't enable Looker reports on a Looker instance that requires your data to reside in one specific location. Looker reports use globally distributed storage to support high availability.\n\nRequirements and limitations\n----------------------------\n\nBefore you enable Looker reports, verify that your Looker (original) or Looker (Google Cloud core) instance meets the following requirements:\n\n- Your Looker instance must be running Looker 24.18 or later and be Looker-hosted.\n- If your Looker instance uses Google OAuth for authentication, your instance must be running Looker 25.4 or later.\n\n- You must have the [Admin Looker role](/looker/docs/admin-panel-users-roles#default_roles) within your Looker instance.\n\n| **Note:** Looker reports are in preview with limited support. We encourage you to share your feedback to help us improve. To report bugs or issues, send an email to [`studio-in-looker-feedback@google.com`](mailto:studio-in-looker-feedback@google.com) with the following details:\n|\n| - A clear description of the problem and the expected behavior\n| - Steps to reproduce the issue\n| - Any additional relevant details\n\n### Limitations\n\nLooker reports are in preview, and the following limitations apply:\n\n- Looker reports aren't supported for Looker (Google Cloud core) instances that are configured to use CMEK, VPC-SC, or [FIPS 140-2 validated encryption](/looker/docs/looker-core-fips-mode).\n- Looker (Google Cloud core) users who are granted the [Admin via IAM](/looker/docs/admin-panel-users-roles#admin_via_iam) role, but not the [Looker Admin](/looker/docs/admin-panel-users-roles#default_roles) role, won't be able to create or view reports. To enable report usage, assign the Looker Admin role to these users on the Looker **Roles** page in the Admin panel.\n- Users won't be able to use Looker reports if they log in to their Looker instance by using secondary authentication.\n- Looker reports are not accessible using the [Looker mobile application](/looker/docs/looker-core-mobile-app).\n\nEnabling Looker reports\n-----------------------\n\nTo enable Looker reports, follow the instructions for Looker (original) or Looker (Google Cloud core):\n\n- [Looker (original)](#original)\n- [Looker (Google Cloud core)](#core)\n\n### Looker (original)\n\nTo enable Looker reports for a Looker (original) instance, follow these steps:\n\n1. In Looker, navigate to **Admin** \\\u003e **Labs** , and enable the **Access Studio in Looker** [Labs feature](/looker/docs/admin-panel-general-labs).\n2. In Looker, navigate to **Admin** \\\u003e **Reports** \\\u003e **Reports setup**.\n3. On the **Reports** page, enable the **Enable Reports** option.\n\n### Looker (Google Cloud core)\n\n| **Note:** Looker reports are supported only on Looker (Google Cloud core) instances that are running Looker 25.4 or later and that are *not* using [FIPS 140-2 validated encryption](/looker/docs/looker-core-fips-mode).\n\nTo enable Looker reports for a Looker (Google Cloud core) instance, follow these steps:\n\n1. In Looker, navigate to **Admin** \\\u003e **Reports** \\\u003e **Reports setup**.\n2. On the **Reports** page, enable the **Enable Reports** option.\n\nUsing Looker reports with Gemini in Looker\n------------------------------------------\n\nWhen Looker reports and [Gemini in Looker](/looker/docs/overview-gemini) are enabled for a Looker instance, Looker users who have the appropriate permissions can query Looker Explore data in natural language by accessing [Conversational Analytics](/looker/docs/studio/conversational-analytics).\n\n- For Looker (original), the instance must be running Looker 25.2 or later, and the instance must be enabled for Gemini in Looker in the Admin settings. For detailed enablement instructions, see the [Admin settings --- Gemini in Looker](/looker/docs/admin-panel-platform-gil) documentation page.\n- For [Looker (Google Cloud core)](/looker/docs/overview-gemini), the instance must be enabled for Gemini in Looker in the Google Cloud console. For detailed enablement instructions, see the [Administer Gemini on your Looker (Google Cloud core) instance](/looker/docs/looker-core-admin-gemini) documentation page.\n\nDisabling Looker reports\n------------------------\n\n| **Warning:** If you disable Looker reports, Looker permanently deletes all reports after 30 days. To avoid permanent report deletion, and to restore access to reports, re-enable Looker reports within 30 days of disabling the feature. In addition, only reports created with Looker version 25.4 or later can be recovered. Any reports created with a Looker version prior to Looker 25.4 will be permanently deleted.\n\nTo disable Looker reports, follow these steps:\n\n1. Navigate to **Admin** \\\u003e **Reports** \\\u003e **Reports setup**.\n2. Disable the **Enable Reports** option.\n3. Confirm that you understand that you will lose all your report data after 30 days if you disable Looker reports by selecting the box.\n4. Click **Disable**.\n\nRestoring access to Looker reports\n----------------------------------\n\n| **Important:** When you disable Looker reports for your Looker instance, users can't access the saved reports on that instance. Per [Cloud Data Processing Addendum (Customers)](https://cloud.google.com/terms/data-processing-addendum), Looker permanently deletes your reports and their associated data 30 days after you disable Looker reports.\n\nTo restore access to existing Looker reports on your Looker instance, follow the [steps to re-enable Looker reports](#enabling) within 30 days of disabling the feature.\n| **Important:** Only reports that are created with Looker 25.4 or later can be recovered after disabling Looker reports. Any reports that were created with a Looker version prior to Looker 25.4 will be permanently deleted.\n\nAfter you re-enable Looker reports, some reports might appear in the **Recovered reports** folder. This typically occurs if the report's original folder was deleted or if the folder's permissions were changed. Admins can [move these reports](/looker/docs/move-share-copy-reports#move_reports) from the **Recovered reports** folder to another folder or [delete the reports](/looker/docs/move-share-copy-reports#delete_reports)."]]
