HA cluster manual configuration guide for SAP NetWeaver on SLES

This guide shows you how to deploy and configure a performance-optimized SUSE Linux Enterprise Server (SLES) high-availability (HA) cluster for SAP NetWeaver system.

Except for the procedures that are specific to the Standalone Enqueue Server 2 (ENSA2), which is available only in ABAP, this guide applies to both ABAP and Java SAP NetWeaver stacks.

Unless an exception is indicated in the guide, examples that use "ASCS" are valid for both ABAP SAP Central Services (ASCS) and Java SAP Central Services (SCS).

If you are using a Java stack, before you use the commands or examples in this guide, replace any instances of "ASCS" with "SCS".

This guide includes the steps for:

• Configuring an internal passthrough Network Load Balancer to reroute traffic in the event of a failure.
• Configuring a Pacemaker cluster on SLES to manage the SAP systems and other resources during a failover. Simple Mount configuration is also provided for SLES 15 for SAP and later.

This guide also includes steps for configuring the SAP NetWeaver system for HA, but refer to the SAP documentation for the definitive instructions.

For information about deploying Compute Engine VMs for SAP NetWeaver that is not specific to high-availability, see the SAP NetWeaver deployment guide that is specific to your operating system.

To configure an HA cluster for SAP HANA on Red Hat Enterprise Linux (RHEL), see the HA cluster manual configuration guide for SAP NetWeaver on RHEL.

This guide is intended for advanced SAP NetWeaver users who are familiar with Linux high-availability configurations for SAP NetWeaver.

The system that this guide deploys

Following this guide, you will deploy two SAP NetWeaver instances and set up an HA cluster on SLES. You deploy each SAP NetWeaver instance on a Compute Engine VM in a different zone within the same region. A high-availability installation of the underlying database is not covered in this guide.

The deployed cluster includes the following functions and features:

• Two host VMs, one for the active ASCS instance and one for the active instance of the ENSA2 Enqueue Replicator or the ENSA1 Enqueue Replication Server (ENSA1). Both ENSA2 and ENSA1 instances are referred to as ERS.
• The Pacemaker high-availability cluster resource manager.
• A STONITH fencing mechanism.
• Automatic restart of the failed instance as the new secondary instance.

This guide has you use the Cloud Deployment Manager templates that are provided by Google Cloud to deploy the Compute Engine virtual machines (VMs), which ensures that the VMs meet SAP supportability requirements and conform to current best practices.

To use Terraform to automate the deployment of SAP NetWeaver HA systems, see Terraform: HA cluster configuration guide for SAP NetWeaver on SLES.

Prerequisites

Before you create the SAP NetWeaver high availability cluster, make sure that the following prerequisites are met:

• You have read the SAP NetWeaver planning guide and the High-availability planning guide for SAP NetWeaver on Google Cloud.
• You or your organization has a Google Cloud account and you have created a project for the SAP NetWeaver deployment. For information about creating Google Cloud accounts and projects, see Creating a project in the SAP NetWeaver Deployment Guide for Linux.
• If you require your SAP workload to run in compliance with data residency, access control, support personnel, or regulatory requirements, then you must create the required Assured Workloads folder. For more information, see Compliance and sovereign controls for SAP on Google Cloud.

• If you are using VPC internal DNS, then the value of the vmDnsSetting variable in your project metadata must be either GlobalOnly or ZonalPreferred to enable the resolution of the node names across zones. The default setting of vmDnsSetting is ZonalOnly. For more information, see:

  • Configuring DNS names for your project or instances
  • Querying custom metadata
  • Setting project-wide custom metadata

• You have set up a file share using an NFS shared file storage solution, like Filestore Enterprise.

• If OS login is enabled in your project metadata, you need to disable OS login temporarily until your deployment is complete. For deployment purposes, this procedure configures SSH keys in instance metadata. When OS login is enabled, metadata-based SSH key configurations are disabled, and this deployment fails. After deployment is complete, you can enable OS login again.

  For more information, see:

  • Enabling or disabling OS Login
  • Add SSH keys to VMs that use metadata-based SSH keys

To avoid unintentionally exposing your VM instance to the internet, follow these recommendations:

• Use a NAT gateway.
• Create firewall rules that block all external access that you don't require.
• When you create your VMs:
  • Specify a network tag for each VM for use in routing and firewall rules. If you use the Deployment Manager template that Google Cloud provides, specify a tag with networkTag: [TAG].
  • Create the VMs without an external IP. If you use the Deployment Manager templates that Google Cloud provides, specify publicIP: No.

Related information from SUSE

Except where required for the Google Cloud environment, the information in this guide is consistent with the following related guides from SUSE:

• SAP NetWeaver Enqueue Replication 1 High Availability Cluster - Setup Guide for SAP NetWeaver 7.40 and 7.50 | SUSE Linux Enterprise Server for SAP Applications 12
• SAP NetWeaver Enqueue Replication 1 High Availability Cluster - Setup Guide for SAP NetWeaver 7.40 and 7.50 | SUSE Linux Enterprise Server for SAP Applications 15
• SAP S/4 HANA - Enqueue Replication 2 High Availability Cluster - Setup Guide | SUSE Linux Enterprise Server for SAP Applications 12
• SAP S/4 HANA - Enqueue Replication 2 High Availability Cluster - Setup Guide | SUSE Linux Enterprise Server for SAP Applications 15

Creating a network

For security purposes, create a new network. You can control who has access by adding firewall rules or by using another access control method.

If your project has a default VPC network, don't use it. Instead, create your own VPC network so that the only firewall rules in effect are those that you create explicitly.

During deployment, VM instances typically require access to the internet to download Google Cloud's Agent for SAP. If you are using one of the SAP-certified Linux images that are available from Google Cloud, the VM instance also requires access to the internet in order to register the license and to access OS vendor repositories. A configuration with a NAT gateway and with VM network tags supports this access, even if the target VMs do not have external IPs.

To set up networking:

Console

1. In the Google Cloud console, go to the VPC networks page.

   Go to VPC networks

2. Click Create VPC network.
3. Enter a Name for the network.

   The name must adhere to the naming convention. VPC networks use the Compute Engine naming convention.

4. For Subnet creation mode, choose Custom.
5. In the New subnet section, specify the following configuration parameters for a subnet:
   1. Enter a Name for the subnet.
   2. For Region, select the Compute Engine region where you want to create the subnet.
   3. For IP stack type, select IPv4 (single-stack) and then enter an IP address range in the CIDR format, such as 10.1.0.0/24.

      This is the primary IPv4 range for the subnet. If you plan to add more than one subnet, then assign non-overlapping CIDR IP ranges for each subnetwork in the network. Note that each subnetwork and its internal IP ranges are mapped to a single region.

   4. Click Done.
6. To add more subnets, click Add subnet and repeat the preceding steps. You can add more subnets to the network after you have created the network.
7. Click Create.

gcloud

1. Go to Cloud Shell.

   Go to Cloud Shell

2. To create a new network in the custom subnetworks mode, run:

   gcloud compute networks create NETWORK_NAME --subnet-mode custom

   Replace NETWORK_NAME with the name of the new network. The name must adhere to the naming convention. VPC networks use the Compute Engine naming convention.

   Specify --subnet-mode custom to avoid using the default auto mode, which automatically creates a subnet in each Compute Engine region. For more information, see Subnet creation mode.

3. Create a subnetwork, and specify the region and IP range:

   gcloud compute networks subnets create SUBNETWORK_NAME \
       --network NETWORK_NAME --region REGION --range RANGE

   Replace the following:

   • SUBNETWORK_NAME: the name of the new subnetwork
   • NETWORK_NAME: the name of the network you created in the previous step
   • REGION: the region where you want the subnetwork
   • RANGE: the IP address range, specified in CIDR format, such as 10.1.0.0/24

     If you plan to add more than one subnetwork, assign non-overlapping CIDR IP ranges for each subnetwork in the network. Note that each subnetwork and its internal IP ranges are mapped to a single region.

4. Optionally, repeat the previous step and add additional subnetworks.

Setting up a NAT gateway

If you need to create one or more VMs without public IP addresses, you need to use network address translation (NAT) to enable the VMs to access the internet. Use Cloud NAT, a Google Cloud distributed, software-defined managed service that lets VMs send outbound packets to the internet and receive any corresponding established inbound response packets. Alternatively, you can set up a separate VM as a NAT gateway.

Key Point: When you configure Cloud NAT, specify at least 160 as the minimum number of ports per VM. Certain operating system updates run concurrent processes that might exceed the Cloud NAT default for the number of ports, which can result in activation or download errors.

When you create a Cloud NAT instance, specify the number of ports in the Minimum ports per VM field under Advanced configurations on the Create a NAT gateway page in the Google Cloud console.

To create a Cloud NAT instance for your project, see Using Cloud NAT.

After you configure Cloud NAT for your project, your VM instances can securely access the internet without a public IP address.

Adding firewall rules

By default, incoming connections from outside your Google Cloud network are blocked. To allow incoming connections, set up a firewall rule for your VM. Firewall rules regulate only new incoming connections to a VM. After a connection is established with a VM, traffic is permitted in both directions over that connection.

You can create a firewall rule to allow access to specified ports, or to allow access between VMs on the same subnetwork.

Create firewall rules to allow access for such things as:

• The default ports used by SAP NetWeaver, as documented in TCP/IP Ports of All SAP Products.
• Connections from your computer or your corporate network environment to your Compute Engine VM instance. If you are unsure of what IP address to use, talk to your company's network admin.
• Communication between VMs in a 3-tier, scaleout, or high-availability configuration. For example, if you are deploying a 3-tier system, you will have at least 2 VMs in your subnetwork: the VM for SAP NetWeaver, and another VM for the database server. To enable communication between the two VMs, you must create a firewall rule to allow traffic that originates from the subnetwork.
• Cloud Load Balancing health checks. For more information, see Create a firewall rule for the health checks.

Note: The following procedure is a simplified version of the instructions for creating firewall rules. For more detailed instructions, see the Virtual Private Cloud documentation.

To create a firewall rule:

1. In the Google Cloud console, go to the VPC network Firewall page.

   Go to Firewall

2. At the top of the page, click Create firewall rule.

   • In the Network field, select the network where your VM is located.
   • In the Targets field, select All instances in the network.
   • In the Source filter field, select one of the following:
     • IP ranges to allow incoming traffic from specific IP addresses. Specify the range of IP addresses in the Source IP ranges field.
     • Subnets to allow incoming traffic from a particular subnetwork. Specify the subnetwork name in the following subnets field. You can use this option to allow access between the VMs in a 3-tier or scaleout configuration.
   • In the Protocols and ports section, select Specified protocols and ports and specify tcp:PORT_NUMBER;.

3. Click Create to create your firewall rule.

Deploying the VMs for SAP NetWeaver

Before you begin configuring the HA cluster, you define and deploy the VM instances that will serve as the primary and secondary nodes in your HA cluster.

To define and deploy the VMs, you use the same Cloud Deployment Manager template that you use to deploy a VM for an SAP NetWeaver system in the Automated VM deployment for SAP NetWeaver on Linux.

However, to deploy two VMs instead of one, you need to add the definition for the second VM to the configuration file by copying and pasting the definition of the first VM. After you create the second definition, you need to change the resource and instance names in the second definition. To protect against a zonal failure, specify a different zone in the same region. All other property values in the two definitions stay the same.

After the VMs have deployed successfully, you install SAP NetWeaver and define and configure the HA cluster.

The following instructions use the Cloud Shell, but are generally applicable to the Google Cloud CLI.

1. Open Cloud Shell.

   Go to Cloud Shell

2. Download the YAML configuration file template, template.yaml, to your working directory:

   wget https://storage.googleapis.com/cloudsapdeploy/deploymentmanager/latest/dm-templates/sap_nw/template.yaml

3. Optionally, rename the template.yaml file to identify the configuration it defines. For example, nw-ha-sles15sp3.yaml.

4. Open the YAML configuration file in the Cloud Shell code editor by clicking the pencil () icon in the upper right corner of Cloud Shell terminal window to launch the editor.

5. In the YAML configuration file template, define the first VM instance. You define the second VM instance in the next step after the following table.

   Specify the property values by replacing the brackets and their contents with the values for your installation. The properties are described in the following table. For an example of a completed configuration file, see Example of a complete YAML configuration file.

   Property	Data type	Description
   name	String	An arbitrary name that identifies the deployment resource that the following set of properties define.
   type	String	Specifies the location, type, and version of the Deployment Manager template to use during deployment. The YAML file includes two type specifications, one of which is commented out. The type specification that is active by default specifies the template version as latest. The type specification that is commented out specifies a specific template version with a timestamp. If you need all of your deployments to use the same template version, use the type specification that includes the timestamp.
   instanceName	String	The name for the VM instance that you are defining. Specify different names in the primary and secondary VM definitions. Consider using names that identify the instances as belonging to the same high-availability cluster. Instance names must be 13 characters or less and be specified in lowercase letters, numbers, or hyphens. Use a name that is unique within your project.
   instanceType	String	The type of Compute Engine VMs that you need. Specify the same instance type for the primary and secondary VMs. If you need a custom VM type, specify a small predefined VM type and, after deployment is complete, customize the VM as needed.
   zone	String	The Google Cloud zone in which to deploy the VM instance that your are defining. Specify different zones in the same region for the primary and secondary VM definitions. The zones must be in the same region that you selected for your subnet.
   subnetwork	String	The name of the subnetwork that you created in a previous step. If you are deploying to a shared VPC, specify this value as SHAREDVPC_PROJECT/SUBNETWORK. For example, myproject/network1.
   linuxImage	String	The name of the Linux operating-system image or image family that you are using with SAP NetWeaver. To specify an image family, add the prefix family/ to the family name. For example, family/sles-15-sp3-sap. For the list of available image families, see the Images page in the Google Cloud console.
   linuxImageProject	String	The Google Cloud project that contains the image you are going to use. This project might be your own project or the Google Cloud image project suse-sap-cloud. For a list of Google Cloud image projects, see the Images page in the Compute Engine documentation.
   usrsapSize	Integer	The size of the /usr/sap disk. The minimum size is 8 GB.
   swapSize	Integer	The size of the swap volume. The minimum size is 1 GB.
   networkTag	String	Optional. One or more comma-separated network tags that represents your VM instance for firewall or routing purposes. For high-availability configurations, specify a network tag to use for a firewall rule that allows communication between the cluster nodes and a network tag to use in a firewall rule that allows the Cloud Load Balancing health checks to access the cluster nodes. If you specify publicIP: No and do not specify a network tag, be sure to provide another means of access to the internet.
   serviceAccount	String	Optional. Specifies a custom service account to use for the deployed VM. The service account must include the permissions that are required during deployment to configure the VM for SAP. If serviceAccount is not specified, the default Compute Engine service account is used. Specify the full service account address. For example, [e-mail]
   publicIP	Boolean	Optional. Determines whether a public IP address is added to your VM instance. The default is Yes. Note: Do not specify No unless you have a NAT gateway configured with a network tag defined for the VM or you have provided the VM with another route to the internet. If there is no route to the internet, the installation fails.
   sap_deployment_debug	Boolean	Optional. If this value is set to Yes, the deployment generates verbose deployment logs. Do not turn this setting on unless a Google support engineer asks you to enable debugging.

6. In the YAML configuration file, create the definition of the second VM by copying the definition of the first VM and pasting the copy after the first definition. For an example, see Example of a complete YAML configuration file.

7. In the definition of the second VM, specify different values for the following properties than you specified in the first definition:

   • name
   • instanceName
   • zone

8. Create the VM instances:

   gcloud deployment-manager deployments create DEPLOYMENT_NAME --config TEMPLATE_NAME.yaml

   where:

   • DEPLOYMENT_NAME represents the name of your deployment.
   • TEMPLATE_NAME represents the name of your YAML configuration file.

   The preceding command invokes the Deployment Manager, which deploys the VMs according to the specifications in the YAML configuration file.

   Deployment processing consists of two stages. In the first stage, Deployment Manager writes its status to the console. In the second stage, the deployment scripts write their status to Cloud Logging.

Example of a complete YAML configuration file

The following example shows a completed YAML configuration file that deploys two VM instances for an HA configuration for SAP NetWeaver by using the latest version of the Deployment Manager templates. The example omits the comments that the template contains when you first download it.

The file contains the definitions of two resources to deploy: sap_nw_node_1 and sap_nw_node_2. Each resource definition contains the definitions for a VM.

The sap_nw_node_2 resource definition was created by copying and pasting the first definition, and then modifying the values of name, instanceName, and zone properties. All other property values in the two resource definitions are the same.

The properties networkTag and serviceAccount are from the Advanced Options section of the configuration file template.

resources:
- name: sap_nw_node_1
  type: https://storage.googleapis.com/cloudsapdeploy/deploymentmanager/latest/dm-templates/sap_nw/sap_nw.py
  properties:
    instanceName: nw-ha-vm-1
    instanceType: n2-standard-4
    zone: us-central1-b
    subnetwork: example-sub-network-sap
    linuxImage: family/sles-15-sp3-sap
    linuxImageProject: suse-sap-cloud
    usrsapSize: 15
    swapSize: 24
    networkTag: cluster-ntwk-tag,allow-health-check
    serviceAccount: [e-mail]
- name: sap_nw_node_2
  type: https://storage.googleapis.com/cloudsapdeploy/deploymentmanager/latest/dm-templates/sap_nw/sap_nw.py
  properties:
    instanceName: nw-ha-vm-2
    instanceType: n2-standard-4
    zone: us-central1-c
    subnetwork: example-sub-network-sap
    linuxImage: family/sles-15-sp3-sap
    linuxImageProject: suse-sap-cloud
    usrsapSize: 15
    swapSize: 24
    networkTag: cluster-ntwk-tag,allow-health-check
    serviceAccount: [e-mail]

Create firewall rules that allow access to the host VMs

If you haven't done so already, create firewall rules that allow access to each host VM from the following sources:

• For configuration purposes, your local workstation, a bastion host, or a jump server
• For access between the cluster nodes, the other host VMs in the HA cluster
• The health checks that are used by Cloud Load Balancing, as described in the later step Create a firewall rule for the health checks.

When you create VPC firewall rules, you specify the network tags that you defined in the template.yaml configuration file to designate your host VMs as the target for the rule.

To verify deployment, define a rule to allow SSH connections on port 22 from a bastion host or your local workstation.

For access between the cluster nodes, add a firewall rule that allows all connection types on any port from other VMs in the same subnetwork.

Make sure that the firewall rules for verifying deployment and for intra-cluster communication are created before proceeding to the next section. For instructions, see Adding firewall rules.

Verifying the deployment of the VMs

Before you install SAP NetWeaver or begin configuring the HA cluster, verify that the VMs were deployed correctly by checking the logs and the OS storage mapping.

Check the logs

1. In the Google Cloud console, open Cloud Logging to monitor installation progress and check for errors.

   Note: You might incur costs when completing this step in Cloud Logging. For more information, see Cloud Logging pricing.

   Go to Cloud Logging

2. Filter the logs:

   Logs Explorer

   1. In the Logs Explorer page, go to the Query pane.

   2. From the Resource drop-down menu, select Global, and then click Add.

      If you don't see the Global option, then in the query editor, enter the following query:

      resource.type="global"
      "Deployment"
      

   3. Click Run query.

   Legacy Logs Viewer

   • In the Legacy Logs Viewer page, from the basic selector menu, select Global as your logging resource.

3. Analyze the filtered logs:

   • If "--- Finished" is displayed, then the deployment processing is complete and you can proceed to the next step.

   • If you see a quota error:

     1. On the IAM & Admin Quotas page, increase any of your quotas that do not meet the SAP NetWeaver requirements that are listed in the SAP NetWeaver planning guide.

     2. On the Deployment Manager Deployments page, delete the deployment to clean up the VMs and persistent disks from the failed installation.

     3. Rerun your deployment.

Check the configuration of the VMs

1. After the VM instances deploy, connect to the VMs by using ssh.

   1. If you haven't already done so, create a firewall rule to allow an SSH connection on port 22.

   2. Go to the VM Instances page.

      Go to VM Instances

   3. Connect to each VM instance by clicking the SSH button on the entry for each VM instance, or you can use your preferred SSH method.

      

2. Display the file system:

   ~> df -h

   Ensure that you see output similar to the following:

   Filesystem                 Size  Used Avail Use% Mounted on
   devtmpfs                    32G  8.0K   32G   1% /dev
   tmpfs                       48G     0   48G   0% /dev/shm
   tmpfs                       32G  402M   32G   2% /run
   tmpfs                       32G     0   32G   0% /sys/fs/cgroup
   /dev/sda3                   30G  3.4G   27G  12% /
   /dev/sda2                   20M  3.7M   17M  19% /boot/efi
   /dev/mapper/vg_usrsap-vol   15G   48M   15G   1% /usr/sap
   tmpfs                      6.3G     0  6.3G   0% /run/user/1002
   tmpfs                      6.3G     0  6.3G   0% /run/user/0

3. Confirm that the swap space was created:

   ~> cat /proc/meminfo | grep Swap

   You see results similar to the following example:

   SwapCached:            0 kB
   SwapTotal:      25161724 kB
   SwapFree:       25161724 kB

If any of the validation steps show that the installation failed:

1. Correct the error.
2. On the Deployments page, delete the deployment to clean up the VMs and persistent disks from the failed installation.
3. Rerun your deployment.

Update the Google Cloud CLI

The Deployment Manager template installed the Google Cloud CLI on the VMs during deployment. Update the gcloud CLI to ensure that it includes all of the latest updates.

1. SSH into the primary VM.

2. Update the gcloud CLI:

   ~>  sudo gcloud components update

3. Follow the prompts.

4. Repeat the steps on the secondary VM.

Enable load balancer back-end communication between the VMs

After you have confirmed that the VMs deployed successfully, enable backend communication between the VMs that will serve as the nodes in your HA cluster.

You enable backend communication between the VMs by modifying the configuration of the google-guest-agent, which is included in the Linux guest environment for all Linux public images that are provided by Google Cloud.

To enable load balancer back-end communications, perform the following steps on each VM that is a part of your cluster:

1. Stop the agent:

   sudo service google-guest-agent stop

2. Open or create the file /etc/default/instance_configs.cfg for editing. For example:

   sudo vi /etc/default/instance_configs.cfg

3. In the /etc/default/instance_configs.cfg file, specify the following configuration properties as shown. If the sections don't exist, create them. In particular, make sure that both the target_instance_ips and ip_forwarding properties are set to false:

   [IpForwarding]
   ethernet_proto_id = 66
   ip_aliases = true
   target_instance_ips = false
   
   [NetworkInterfaces]
   dhclient_script = /sbin/google-dhclient-script
   dhcp_command =
   ip_forwarding = false
   setup = true
   

4. Start the guest agent service:

   sudo service google-guest-agent start

The load balancer health check configuration requires both a listening target port for the health check and an assignment of the virtual IP to an interface. For more information, see Test the load balancer configuration.

Configure SSH keys on the primary and secondary VMs

To allow files to be copied between the hosts in the HA cluster, the steps in this section create root SSH connections between the two hosts.

The Deployment Manager templates that Google Cloud provides generate a key for you, but you can replace it with a key you generate if needed.

Your organization is likely to have guidelines that govern internal network communications. If necessary, after deployment is complete you can remove the metadata from the VMs and the keys from the authorized_keys directory.

If setting up direct SSH connections does not comply with your organization's guidelines, you can transfer files by using other methods, such as:

• Transfer smaller files through your local workstation by using the Cloud Shell Upload file and Download file menu options. See Managing files with Cloud Shell.
• Exchange files using a Cloud Storage bucket. See Uploads and downloads.
• Use a file storage solution like Filestore or NetApp Cloud Volumes Service to create a shared folder. See File sharing solutions.

To enable SSH connections between the primary and secondary instances, follow these steps. The steps assume that you are using the SSH key that is generated by the Deployment Manager templates for SAP.

1. On the primary host VM:

   1. Connect to the VM via SSH.

   2. Switch to root:

      $ sudo su -

   3. Confirm that the SSH key exists:

      # ls -l /root/.ssh/

      You should see the id_rsa key files as in the following example:

      -rw-r--r-- 1 root root  569 May  4 23:07 authorized_keys
      -rw------- 1 root root 2459 May  4 23:07 id_rsa
      -rw-r--r-- 1 root root  569 May  4 23:07 id_rsa.pub

   4. Update the primary VM's metadata with information about the SSH key for the secondary VM.

      # gcloud compute instances add-metadata SECONDARY_VM_NAME \
      --metadata "ssh-keys=$(whoami):$(cat ~/.ssh/id_rsa.pub)" \
      --zone SECONDARY_VM_ZONE

   5. Confirm that the SSH keys are set up properly by opening an SSH connection from the primary system to the secondary system:

      # ssh SECONDARY_VM_NAME

2. On the secondary host VM:

   1. SSH into the VM.

   2. Switch to root:

      $ sudo su -

   3. Confirm that the ssh key exists:

      # ls -l /root/.ssh/

      You should see the id_rsa key files as in the following example:

      -rw-r--r-- 1 root root  569 May  4 23:07 authorized_keys
      -rw------- 1 root root 2459 May  4 23:07 id_rsa
      -rw-r--r-- 1 root root  569 May  4 23:07 id_rsa.pub

   4. Update the secondary VM's metadata with information about the SSH key for the primary VM.

      # gcloud compute instances add-metadata PRIMARY_VM_NAME \
      --metadata "ssh-keys=$(whoami):$(cat ~/.ssh/id_rsa.pub)" \
      --zone PRIMARY_VM_ZONE

      # cat ~/.ssh/id_rsa.pub >> ~/.ssh/authorized_keys

   5. Confirm that the SSH keys are set up properly by opening an SSH connection from the secondary system to the primary system.

      # ssh PRIMARY_VM_NAME

Set up shared file storage and configure the shared directories

You need to set up an NFS file sharing solution that provides highly-available shared file storage that both nodes of your HA cluster can access. You then create directories on both nodes that map to the shared file storage. The cluster software ensures that the appropriate directories mounted only on the correct instances.

Setting up a file sharing solution is not covered in this guide. For instructions on setting up the file sharing system, see the instructions provided by the vendor of the solution you select. If you choose to use Filestore for your file sharing solution, we recommend using the Enterprise tier of Filestore. To learn how to create a Filestore instance, see Creating instances.

For information about file sharing solutions that are available on Google Cloud, see Shared storage options for HA SAP systems on Google Cloud.

To configure the shared directories:

1. If you did not already set up a highly available NFS shared file storage solution, do so now.

2. Mount the NFS shared storage on both servers for initial configuration.

   ~> sudo mkdir /mnt/nfs
   ~> sudo mount -t nfs NFS_PATH /mnt/nfs

   Replace NFS_PATH with the path to your NFS file share solution. For example, 10.49.153.26:/nfs_share_nw_ha.

3. From either server, create directories for sapmnt, the central transport directory and the instance-specific directory. If you are using a Java stack, replace "ASCS" with "SCS" before you use the following and any other example commands:

   ~> sudo mkdir /mnt/nfs/sapmntSID
   ~> sudo mkdir /mnt/nfs/usrsap{trans,SIDASCSASCS_INSTANCE_NUMBER,SIDERSERS_INSTANCE_NUMBER}

   If you're using a Simple Mount setup, then run the following commands instead:

   ~> sudo mkdir /mnt/nfs/sapmntSID
   ~> sudo mkdir /mnt/nfs/usrsap{trans,SID}

   Replace the following:

   • SID: the SAP system ID (SID). Use uppercase for any letters. For example, AHA.
   • ASCS_INSTANCE_NUMBER: the instance number of the ASCS system. For example, 00.
   • ERS_INSTANCE_NUMBER: the instance number of the ERS system. For example, 10.

4. On both servers, create the necessary mount points:

   ~> sudo mkdir -p /sapmnt/SID
   ~> sudo mkdir -p /usr/sap/trans
   ~> sudo mkdir -p /usr/sap/SID/ASCSASCS_INSTANCE_NUMBER
   ~> sudo mkdir -p /usr/sap/SID/ERSERS_INSTANCE_NUMBER

   If you're using a Simple Mount setup, then run the following commands instead:

   ~> sudo mkdir -p /sapmnt/SID
   ~> sudo mkdir -p /usr/sap/trans
   ~> sudo mkdir -p /usr/sap/SID

5. Configure autofs to mount the common shared file directories when the file directories are first accessed. The mounting of the ASCSASCS_INSTANCE_NUMBER and ERSERS_INSTANCE_NUMBER directories is managed by the cluster software, which you configure in a later step.

   Adjust the NFS options in the commands as needed for your file-sharing solution.

   On both servers, configure autofs:

   ~> echo "/- /etc/auto.sap" | sudo tee -a /etc/auto.master
   ~> NFS_OPTS="-rw,relatime,vers=3,hard,proto=tcp,timeo=600,retrans=2,mountvers=3,mountport=2050,mountproto=tcp"
   ~> echo "/sapmnt/SID ${NFS_OPTS} NFS_PATH/sapmntSID" | sudo tee -a /etc/auto.sap
   ~> echo "/usr/sap/trans ${NFS_OPTS} NFS_PATH/usrsaptrans" | sudo tee -a /etc/auto.sap

   For information about autofs, see autofs - how it works.

   If you're using a Simple Mount setup, then run the following commands instead:

   ~> echo "/- /etc/auto.sap" | sudo tee -a /etc/auto.master
   ~> NFS_OPTS="-rw,relatime,vers=3,hard,proto=tcp,timeo=600,retrans=2,mountvers=3,mountport=2050,mountproto=tcp"
   ~> echo "/sapmnt/SID ${NFS_OPTS}/sapmnt" | sudo tee -a /etc/auto.sap
   ~> echo "/usr/sap/trans ${NFS_OPTS}/usrsaptrans" | sudo tee -a /etc/auto.sap
   ~> echo "/usr/sap/SID  ${NFS_OPTS}/usrsapSID" | sudo tee -a /etc/auto.sap

6. On both servers, start the autofs service:

   ~> sudo systemctl enable autofs
   ~> sudo systemctl restart autofs
   ~> sudo automount -v

7. Trigger autofs to mount shared directories by accessing each directory by using the cd command. For example:

   ~> cd /sapmnt/SID
   ~> cd /usr/sap/trans
   

   If you're using a Simple Mount setup, then run the following command instead:

   ~> cd /sapmnt/SID
   ~> cd /usr/sap/trans
   ~> cd /usr/sap/SID

8. After you access all the directories, issue the df -Th command to confirm the directories are mounted.

   ~> df -Th | grep FILE_SHARE_NAME

   Replace FILE_SHARE_NAME with the name of your NFS file share solution. For example, nfs_share_nw_ha.

   You see mount points and directories similar to the following example:

   10.49.153.26:/nfs_share_nw_ha              nfs      1007G   76M  956G   1% /mnt/nfs
   10.49.153.26:/nfs_share_nw_ha/usrsaptrans  nfs      1007G   76M  956G   1% /usr/sap/trans
   10.49.153.26:/nfs_share_nw_ha/sapmntAHA    nfs      1007G   76M  956G   1% /sapmnt/AHA

   If you're using a Simple Mount setup, then you see mount points and directories similar to the following example:

   10.49.153.26:/nfs_share_nw_ha              nfs      1007G   76M  956G   1% /mnt/nfs
   10.49.153.26:/nfs_share_nw_ha/usrsaptrans  nfs      1007G   76M  956G   1% /usr/sap/trans
   10.49.153.26:/nfs_share_nw_ha/sapmntAHA    nfs      1007G   76M  956G   1% /sapmnt/AHA
   10.49.153.26:/nfs_share_nw_ha/usrsapAHA   nfs      1007G   76M  956G   1% /usr/sap/AHA

Configure the Cloud Load Balancing failover support

The internal passthrough Network Load Balancer service with failover support routes the ASCS and ERS traffic to the active instances of each in an SAP NetWeaver cluster. Internal passthrough Network Load Balancers use virtual IP (VIP) addresses, backend services, instance groups, and health checks to route the traffic appropriately.

Reserve IP addresses for the virtual IPs

For an SAP NetWeaver high-availability cluster, you create two VIPs, which are sometimes referred to as floating IP addresses. One VIP follows the active SAP Central Services (SCS) instance and the other follows the Enqueue Replication Server (ERS) instance. The load balancer routes traffic that is sent to each VIP to the VM that is currently hosting the active instance of the ASCS or ERS component of the VIP.

1. Open Cloud Shell:

   Go to Cloud Shell

2. Reserve an IP address for the virtual IP of the ASCS and for the VIP of the ERS. For ASCS, the IP address is the IP address that applications use to access SAP NetWeaver. For ERS, the IP address is the IP address that is used for Enqueue Server replication. If you omit the --addresses flag, then an IP address in the specified subnet is chosen for you:

   ~ gcloud compute addresses create ASCS_VIP_NAME \
     --region CLUSTER_REGION --subnet CLUSTER_SUBNET \
     --addresses ASCS_VIP_ADDRESS
   
   ~ gcloud compute addresses create ERS_VIP_NAME \
     --region CLUSTER_REGION --subnet CLUSTER_SUBNET \
     --addresses ERS_VIP_ADDRESS

   Replace the following:

   • ASCS_VIP_NAME: specify a name for the virtual IP address of the ASCS instance. For example, ascs-aha-vip.
   • CLUSTER_REGION: specify the Google Cloud region in which your cluster is located. For example, us-central1
   • CLUSTER_SUBNET: specify the subnetwork that you are using with your cluster. For example, example-sub-network-sap.
   • ASCS_VIP_ADDRESS: optionally, specify an IP address for the ASCS virtual IP in CIDR notation. For example, 10.1.0.2.
   • ERS_VIP_NAME: specify a name for the virtual IP address of the ERS instance. For example, ers-aha-vip.
   • ERS_VIP_ADDRESS: optionally, specify an IP address for the ERS virtual IP in CIDR notation. For example, 10.1.0.4.

   For more information about reserving a static IP, see Reserving a static internal IP address.

3. Confirm IP address reservation:

   ~ gcloud compute addresses describe VIP_NAME \
     --region CLUSTER_REGION

   You should see output similar to the following example:

   address: 10.1.0.2
   addressType: INTERNAL
   creationTimestamp: '2022-04-04T15:04:25.872-07:00'
   description: ''
   id: '555067171183973766'
   kind: compute#address
   name: ascs-aha-vip
   networkTier: PREMIUM
   purpose: GCE_ENDPOINT
   region: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1
   selfLink: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1/addresses/ascs-aha-vip
   status: RESERVED
   subnetwork: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1/subnetworks/example-sub-network-sap

Define host names for the VIP address in /etc/hosts

Define a host name for each VIP address and then add the IP addresses and host names for both the VMs and the VIPs to the /etc/hosts file on each VM.

The VIP host names are not known outside of the VMs unless you also add them to your DNS service. Adding these entries to the local /etc/hosts file protects your cluster from any disruptions to your DNS service.

Your updates to the /etc/hosts file should look similar to the following example:

127.0.0.1   localhost localhost.localdomain localhost4 localhost4.localdomain4
::1         localhost localhost.localdomain localhost6 localhost6.localdomain6
10.1.0.113 nw-ha-vm-2.us-central1-c.c.example-project-123456.internal nw-ha-vm-2
10.1.0.2   ascs-aha-vip
10.1.0.4   ers-aha-vip
10.1.0.114 nw-ha-vm-1.us-central1-b.c.example-project-123456.internal nw-ha-vm-1  # Added by Google
169.254.169.254 metadata.google.internal  # Added by Google

Create the Cloud Load Balancing health checks

Create health checks: one for the active ASCS instance and one for the active ERS.

1. In Cloud Shell, create the health checks. To avoid clashing with other services, designate port numbers for the ASCS and ERS instances in the private range, 49152-65535. The check-interval and timeout values in the following commands are slightly longer than the defaults so as to increase failover tolerance during Compute Engine live migration events. You can adjust the values, if necessary:

   1. ~ gcloud compute health-checks create tcp ASCS_HEALTH_CHECK_NAME \
      --port=ASCS_HEALTHCHECK_PORT_NUM --proxy-header=NONE --check-interval=10 --timeout=10 \
      --unhealthy-threshold=2 --healthy-threshold=2

   2. ~ gcloud compute health-checks create tcp ERS_HEALTH_CHECK_NAME \
      --port=ERS_HEALTHCHECK_PORT_NUM --proxy-header=NONE --check-interval=10 --timeout=10 \
      --unhealthy-threshold=2 --healthy-threshold=2

2. Confirm the creation of each health check:

   ~ gcloud compute health-checks describe HEALTH_CHECK_NAME

   You should see output similar to the following example:

   checkIntervalSec: 10
   creationTimestamp: '2021-05-12T15:12:21.892-07:00'
   healthyThreshold: 2
   id: '1981070199800065066'
   kind: compute#healthCheck
   name: ascs-aha-health-check-name
   selfLink: https://www.googleapis.com/compute/v1/projects/example-project-123456/global/healthChecks/scs-aha-health-check-name
   tcpHealthCheck:
     port: 60000
     portSpecification: USE_FIXED_PORT
     proxyHeader: NONE
   timeoutSec: 10
   type: TCP
   unhealthyThreshold: 2

Create a firewall rule for the health checks

If you haven't done so already, define a firewall rule for a port in the private range that allows access to your host VMs from the IP ranges that are used by Cloud Load Balancing health checks, 35.191.0.0/16 and 130.211.0.0/22. For more information about firewall rules for load balancers, see Creating firewall rules for health checks.

1. If you don't already have one, add a network tag to your host VMs. This network tag is used by the firewall rule for health checks.

   • ~ gcloud compute instances add-tags  PRIMARY_VM_NAME \
     --zone=PRIMARY_ZONE \
     --tags NETWORK_TAGS

   • ~ gcloud compute instances add-tags  SECONDARY_VM_NAME \
     --zone=SECONDARY_ZONE \
     --tags NETWORK_TAGS

2. Create a firewall rule that uses the network tag to allow the health checks:

   ~ gcloud compute firewall-rules create  RULE_NAME \
     --network=NETWORK_NAME \
     --action=ALLOW \
     --direction=INGRESS \
     --source-ranges=35.191.0.0/16,130.211.0.0/22 \
     --target-tags=NETWORK_TAGS \
     --rules=tcp:ASCS_HEALTHCHECK_PORT_NUM,tcp:ERS_HEALTHCHECK_PORT_NUM

   For example:

   gcloud compute firewall-rules create  nw-ha-cluster-health-checks \
   --network=example-network \
   --action=ALLOW \
   --direction=INGRESS \
   --source-ranges=35.191.0.0/16,130.211.0.0/22 \
   --target-tags=allow-health-check \
   --rules=tcp:60000,tcp:60010

Create Compute Engine instance groups

You need to create an instance group in each zone that contains a cluster-node VM and add the VM in that zone to the instance group.

1. In Cloud Shell, create the primary instance group and add the primary VM to it:

   1. ~ gcloud compute instance-groups unmanaged create PRIMARY_IG_NAME \
      --zone=PRIMARY_ZONE

   2. ~ gcloud compute instance-groups unmanaged add-instances PRIMARY_IG_NAME \
      --zone=PRIMARY_ZONE \
      --instances=PRIMARY_VM_NAME

2. In Cloud Shell, create the secondary instance group and add the secondary VM to it:

   1. ~ gcloud compute instance-groups unmanaged create SECONDARY_IG_NAME \
      --zone=SECONDARY_ZONE

   2. ~ gcloud compute instance-groups unmanaged add-instances SECONDARY_IG_NAME \
      --zone=SECONDARY_ZONE \
      --instances=SECONDARY_VM_NAME

3. Confirm the creation of the instance groups:

   ~ gcloud compute instance-groups unmanaged list

   You should see output similar to the following example:

   NAME                              ZONE           NETWORK              NETWORK_PROJECT        MANAGED  INSTANCES
   sap-aha-primary-instance-group    us-central1-b  example-network-sap  example-project-123456  No       1
   sap-aha-secondary-instance-group  us-central1-c  example-network-sap  example-project-123456  No       1
   

Configure the backend services

Create two backend services, one for ASCS and one for ERS. Add both instance groups to each backend service, designating the opposite instance group as the failover instance group in each backend service. Finally, create forwarding rules from the VIPs to the backend services.

1. In Cloud Shell, create the backend service and failover group for ASCS:

   1. Create the backend service for ASCS:

      ~ gcloud compute backend-services create ASCS_BACKEND_SERVICE_NAME \
         --load-balancing-scheme internal \
         --health-checks ASCS_HEALTH_CHECK_NAME \
         --no-connection-drain-on-failover \
         --drop-traffic-if-unhealthy \
         --failover-ratio 1.0 \
         --region CLUSTER_REGION \
         --global-health-checks

   2. Add the primary instance group to the ASCS backend service:

      ~ gcloud compute backend-services add-backend ASCS_BACKEND_SERVICE_NAME \
        --instance-group PRIMARY_IG_NAME \
        --instance-group-zone PRIMARY_ZONE \
        --region CLUSTER_REGION

   3. Add the secondary instance group as the failover instance group for the ASCS backend service:

      ~ gcloud compute backend-services add-backend ASCS_BACKEND_SERVICE_NAME \
        --instance-group SECONDARY_IG_NAME \
        --instance-group-zone SECONDARY_ZONE \
        --failover \
        --region CLUSTER_REGION

2. In Cloud Shell, create the backend service and failover group for ERS:

   1. Create the backend service for ERS:

      ~ gcloud compute backend-services create ERS_BACKEND_SERVICE_NAME \
      --load-balancing-scheme internal \
      --health-checks ERS_HEALTH_CHECK_NAME \
      --no-connection-drain-on-failover \
      --drop-traffic-if-unhealthy \
      --failover-ratio 1.0 \
      --region CLUSTER_REGION \
      --global-health-checks

   2. Add the secondary instance group to the ERS backend service:

      ~ gcloud compute backend-services add-backend ERS_BACKEND_SERVICE_NAME \
        --instance-group SECONDARY_IG_NAME \
        --instance-group-zone SECONDARY_ZONE \
        --region CLUSTER_REGION

   3. Add the primary instance group as the failover instance group for the ERS backend service:

      ~ gcloud compute backend-services add-backend ERS_BACKEND_SERVICE_NAME \
        --instance-group PRIMARY_IG_NAME \
        --instance-group-zone PRIMARY_ZONE \
        --failover \
        --region CLUSTER_REGION

3. Optionally, confirm that the backend services contain the instance groups as expected:

   ~ gcloud compute backend-services describe BACKEND_SERVICE_NAME \
    --region=CLUSTER_REGION

   You should see output similar to the following example for the ASCS backend service. For ERS, failover: true would appear on the primary instance group:

   backends:
   - balancingMode: CONNECTION
     group: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-b/instanceGroups/sap-aha-primary-instance-group
   - balancingMode: CONNECTION
     failover: true
     group: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-c/instanceGroups/sap-aha-secondary-instance-group
   connectionDraining:
     drainingTimeoutSec: 0
   creationTimestamp: '2022-04-06T10:58:37.744-07:00'
   description: ''
   failoverPolicy:
     disableConnectionDrainOnFailover: true
     dropTrafficIfUnhealthy: true
     failoverRatio: 1.0
   fingerprint: s4qMEAyhrV0=
   healthChecks:
   - https://www.googleapis.com/compute/v1/projects/example-project-123456/global/healthChecks/ascs-aha-health-check-name
   id: '6695034709671438882'
   kind: compute#backendService
   loadBalancingScheme: INTERNAL
   name: ascs-aha-backend-service-name
   protocol: TCP
   region: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1
   selfLink: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1/backendServices/ascs-aha-backend-service-name
   sessionAffinity: NONE
   timeoutSec: 30

4. In Cloud Shell, create forwarding rules for the ASCS and ERS backend services:

   1. Create the forwarding rule from the ASCS VIP to the ASCS backend service:

      ~ gcloud compute forwarding-rules create ASCS_FORWARDING_RULE_NAME \
      --load-balancing-scheme internal \
      --address ASCS_VIP_ADDRESS \
      --subnet CLUSTER_SUBNET \
      --region CLUSTER_REGION \
      --backend-service ASCS_BACKEND_SERVICE_NAME \
      --ports ALL

   2. Create the forwarding rule from the ERS VIP to the ERS backend service:

      ~ gcloud compute forwarding-rules create ERS_FORWARDING_RULE_NAME \
      --load-balancing-scheme internal \
      --address ERS_VIP_ADDRESS \
      --subnet CLUSTER_SUBNET \
      --region CLUSTER_REGION \
      --backend-service ERS_BACKEND_SERVICE_NAME \
      --ports ALL

Note: Your backend instance groups won't register as healthy until you have completed the Pacemaker cluster configuration.

Test the load balancer configuration

Even though your backend instance groups won't register as healthy until later, you can test the load balancer configuration by setting up a listener to respond to the health checks. After setting up a listener, if the load balancer is configured correctly, the status of the backend instance groups changes to healthy.

The following sections present different methods that you can use to test the configuration.

Testing the load balancer with the socat utility

You can use the socat utility to temporarily listen on a health check port. You need to install the socatutility anyway, because you use it later when you configure cluster resources.

1. On both host VMs as root, install the socat utility:

   # zypper install socat

2. On the primary VM, assign the VIP to the eth0 network card temporarily:

   ip addr add VIP_ADDRESS dev eth0

3. On the primary VM, start a socat process to listen for 60 seconds on the ASCS health check port:

   # timeout 60s socat - TCP-LISTEN:ASCS_HEALTHCHECK_PORT_NUM,fork

4. In Cloud Shell, after waiting a few seconds for the health check to detect the listener, check the health of your ASCS backend instance group:

   ~ gcloud compute backend-services get-health ASCS_BACKEND_SERVICE_NAME \
     --region CLUSTER_REGION

   You should see output similar to the following example for ASCS:

   backend: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-b/instanceGroups/sap-aha-primary-instance-group
   status:
     healthStatus:
     - forwardingRule: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1/forwardingRules/scs-aha-forwarding-rule
       forwardingRuleIp: 10.1.0.90
       healthState: HEALTHY
       instance: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-b/instances/nw-ha-vm-1
       ipAddress: 10.1.0.89
       port: 80
     kind: compute#backendServiceGroupHealth
   ---
   backend: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-c/instanceGroups/sap-aha-secondary-instance-group
   status:
     healthStatus:
     - forwardingRule: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1/forwardingRules/scs-aha-forwarding-rule
       forwardingRuleIp: 10.1.0.90
       healthState: UNHEALTHY
       instance: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-c/instances/nw-ha-vm-2
       ipAddress: 10.1.0.88
       port: 80
     kind: compute#backendServiceGroupHealth

5. Remove the VIP from the eth0 interface:

   ip addr del VIP_ADDRESS dev eth0

6. Repeat the steps for ERS, replacing the ASCS variable values with the ERS values.

Testing the load balancer using port 22

If port 22 is open for SSH connections on your host VMs, then you can temporarily edit the health checker to use port 22, which has a listener that can respond to the health checker.

To temporarily use port 22, follow these steps:

1. In the Google Cloud console, go to the Compute Engine Health checks page:

   Go to Health checks

2. Click on your health check name.

3. Click Edit.

4. In the Port field, change the port number to 22.

5. Click Save and wait a minute or two.

6. In Cloud Shell, after waiting a few seconds for the health check to detect the listener, check the health of your backend instance groups:

   ~ gcloud compute backend-services get-health BACKEND_SERVICE_NAME \
     --region CLUSTER_REGION

   You should see output similar to the following:

   backend: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-b/instanceGroups/sap-aha-primary-instance-group
   status:
     healthStatus:
     - forwardingRule: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1/forwardingRules/scs-aha-forwarding-rule
       forwardingRuleIp: 10.1.0.85
       healthState: HEALTHY
       instance: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-b/instances/nw-ha-vm-1
       ipAddress: 10.1.0.79
       port: 80
     kind: compute#backendServiceGroupHealth
   ---
   backend: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-c/instanceGroups/sap-aha-secondary-instance-group
   status:
     healthStatus:
     - forwardingRule: https://www.googleapis.com/compute/v1/projects/example-project-123456/regions/us-central1/forwardingRules/scs-aha-forwarding-rule
       forwardingRuleIp: 10.1.0.85
       healthState: HEALTHY
       instance: https://www.googleapis.com/compute/v1/projects/example-project-123456/zones/us-central1-c/instances/nw-ha-vm-2
       ipAddress: 10.1.0.78
       port: 80
     kind: compute#backendServiceGroupHealth

7. When you are done, change the health check port number back to the original port number.

Set up Pacemaker

The following procedure configures the SUSE implementation of a Pacemaker cluster on Compute Engine VMs for SAP NetWeaver.

For more information about the configuring high-availability clusters on SLES, see the SUSE Linux Enterprise High Availability Extension documentation for your version of SLES.

Install the required cluster packages

1. As root on both the primary and secondary hosts, download the following required cluster packages:

   • The ha_sles pattern:

     # zypper install -t pattern ha_sles

   • The sap-suse-cluster-connector package:

     # zypper install -y sap-suse-cluster-connector

     If you're using a Simple Mount setup, then additionally run the following command:

     # zypper install -y sapstartsrv-resource-agents

   • If you didn't already install it, the socat utility:

     # zypper install -y socat

2. Confirm that the latest high-availability agents are loaded:

   # zypper se -t patch SUSE-SLE-HA

Initialize, configure, and start the cluster on the primary VM

You initialize the cluster by using the ha-cluster-init SUSE script. You then need to edit the Corosync configuration file and sync it with the secondary node. After starting the cluster, you then set additional cluster properties and defaults by using crm commands.

You might receive the following warnings while initializing or joining the cluster:

• No firewall detected - This warning indicates that the cluster initialization process could not find or update the operating system firewall. If you are using an operating system firewall, you need to allow access to these ports. You also need to create a VPC firewall rule that allows access to these ports, as well as those used by the SAP application.
• No watchdog device found - You can ignore this. These instructions do not use SBD.
• You should change the `hacluster` password - Change the password after you have completed these instructions.

Create the Corosync configuration files

1. Create a Corosync configuration file on the primary host:

   1. Using your preferred text editor, create the following file:

      /etc/corosync/corosync.conf

   2. In the corosync.conf file on the primary host, add the following configuration, replacing the italic variable text with your values:

      totem {
       version: 2
       secauth: off
       crypto_hash: sha1
       crypto_cipher: aes256
       cluster_name: hacluster
       clear_node_high_bit: yes
       token: 20000
       token_retransmits_before_loss_const: 10
       join: 60
       max_messages:  20
       transport: udpu
       interface {
         ringnumber: 0
         Bindnetaddr: STATIC_IP_OF_THIS_HOST
         mcastport: 5405
         ttl: 1
       }
      }
      logging {
       fileline:  off
       to_stderr: no
       to_logfile: no
       logfile: /var/log/cluster/corosync.log
       to_syslog: yes
       debug: off
       timestamp: on
       logger_subsys {
         subsys: QUORUM
         debug: off
       }
      }
      nodelist {
       node {
         ring0_addr: THIS_HOST_NAME
         nodeid: 1
       }
       node {
         ring0_addr: OTHER_HOST_NAME
         nodeid: 2
       }
      }
      quorum {
       provider: corosync_votequorum
       expected_votes: 2
       two_node: 1
      }

   Replace the following:

   • STATIC_IP_OF_THIS_HOST: specify the static primary internal IP address of this VM, as shown under Network interfaces in the Google Cloud console or as displayed by gcloud compute instances describe VM_NAME.
   • THIS_HOST_NAME: specify the host name of this VM.
   • OTHER_HOST_NAME: specify the host name of the other VM in the cluster.

2. Create a Corosync configuration file on the secondary host by repeating the same steps you used for the primary host. Except for the static IP of the HDB on the Bindnetaddr property and the order of the host names in the nodelist, the configuration file property values are the same for each host.

Initialize the cluster

To initialize the cluster:

1. Change the password for the hacluster user:

   # passwd hacluster

2. On the primary host as root, initialize the cluster.

   The following commands name the cluster and create the configuration file corosync.conf:configure it, and set up synching between the cluster nodes.

   # crm cluster init --name CLUSTER_NAME --yes ssh
   # crm cluster init --name CLUSTER_NAME --yes --interface eth0 csync2
   # crm cluster init --name CLUSTER_NAME --yes --interface eth0 corosync

3. Start Pacemaker on the primary host:

   # systemctl enable pacemaker
   # systemctl start pacemaker

Set the additional cluster properties

1. Set the general cluster properties:

   # crm configure property stonith-timeout="300s"
   # crm configure property stonith-enabled="true"
   # crm configure rsc_defaults resource-stickiness="1"
   # crm configure rsc_defaults migration-threshold="3"
   # crm configure op_defaults timeout="600"

   When you define the individual cluster resources, the values that you set for resource-stickiness and migration-threshold override the default values that you set here.

   You can see the resource defaults, as well as the values for any defined resources, by entering crm config show.

Join the secondary VM to the cluster

From the open terminal on the primary VM, join and start the cluster on the secondary VM via SSH.

1. Change the password for the hacluster user:

   # passwd hacluster

2. From the primary VM, run the following crm cluster join script options on the secondary VM via SSH. If you have configured your HA cluster as described by these instructions, then you can disregard the warnings about the watchdog device.

   1. Run the --yes ssh option to set up ssh between the cluster nodes:

      # ssh SECONDARY_VM_NAME 'crm cluster join --cluster-node PRIMARY_VM_NAME --yes ssh'

   2. Run the --interface eth0 csync2 option:

      # ssh SECONDARY_VM_NAME 'crm cluster join --cluster-node PRIMARY_VM_NAME --yes --interface eth0 csync2'

   3. Run the ssh_merge option:

      # ssh SECONDARY_VM_NAME 'crm cluster join --cluster-node PRIMARY_VM_NAME --yes ssh_merge'

   4. Run the cluster option:

      # ssh SECONDARY_VM_NAME 'crm cluster join --cluster-node PRIMARY_VM_NAME --yes cluster'

3. Start Pacemaker on the secondary host:

   1. Enable Pacemaker:

      # ssh SECONDARY_VM_NAME systemctl enable pacemaker

   2. Start Pacemaker:

      # ssh SECONDARY_VM_NAME systemctl start pacemaker

4. On either host as root, confirm that the cluster shows both nodes:

   # crm_mon -s

   You should see output similar to the following:

   CLUSTER OK: 2 nodes online, 0 resource instances configured

Configure the cluster resources for the infrastructure

You define the resources that Pacemaker manages in a high-availability cluster. You need to define resources for the following cluster components:

• The fencing device, which prevents split brain scenarios
• The ASCS and ERS directories in the shared file system
• The health checks
• The VIPs
• The ASCS and ERS components

You define the resources for ASCS and ERS components later than the rest of the resources, because you need to install SAP NetWeaver first.

Enable maintenance mode

1. On either host as root, put the cluster in maintenance mode:

   # crm configure property maintenance-mode="true"

2. Confirm maintenance mode:

   # crm status

   The output should indicate that resource management is disabled, as shown in the following example:

   Cluster Summary:
   * Stack: corosync
   * Current DC: nw-ha-vm-1 (version 2.0.4+20200616.2deceaa3a-3.3.1-2.0.4+20200616.2deceaa3a) - partition with quorum
   * Last updated: Fri May 14 15:26:08 2021
   * Last change:  Thu May 13 19:02:33 2021 by root via cibadmin on nw-ha-vm-1
   * 2 nodes configured
   * 0 resource instances configured
   
               *** Resource management is DISABLED ***
   The cluster will not attempt to start, stop or recover services
   
   Node List:
   * Online: [ nw-ha-vm-1 nw-ha-vm-2 ]
   
   Full List of Resources:
   * No resources

Set up fencing

You set up fencing by defining a cluster resource with the fence_gce agent for each host VM.

To ensure the correct sequence of events after a fencing action, you also configure the operating system to delay the restart of Corosync after a VM is fenced. You also adjust the Pacemaker timeout for reboots to account for the delay.

Create the fencing device resources

For each VM in the cluster, you create a cluster resource for the fencing device that can restart that VM. The fencing device for a VM must run on a different VM, so you configure the location of the cluster resource to run on any VM except the VM it can restart.

1. On the primary host as root, create a cluster resource for a fencing device for the primary VM:

   # crm configure primitive FENCING_RESOURCE_PRIMARY_VM stonith:fence_gce \
     op monitor interval="300s" timeout="120s" \
     op start interval="0" timeout="60s" \
     params port="PRIMARY_VM_NAME" zone="PRIMARY_ZONE" \
     project="CLUSTER_PROJECT_ID" \
     pcmk_reboot_timeout=300 pcmk_monitor_retries=4 pcmk_delay_max=30

2. Configure the location of the fencing device for the primary VM so that it is active on only the secondary VM:

   # crm configure location FENCING_LOCATION_NAME_PRIMARY_VM \
     FENCING_RESOURCE_PRIMARY_VM -inf: "PRIMARY_VM_NAME"

3. Confirm the newly created configuration:

   # crm config show related:FENCING_RESOURCE_PRIMARY_VM

   You should see output similar to the following example:

   primitive FENCING_RESOURCE_PRIMARY_VM stonith:fence_gce \
           op monitor interval=300s timeout=120s \
           op start interval=0 timeout=60s \
           params PRIMARY_VM_NAME zone=PRIMARY_ZONE project=CLUSTER_PROJECT_ID pcmk_reboot_timeout=300 pcmk_monitor_retries=4 pcmk_delay_max=30
   location FENCING_RESOURCE_PRIMARY_VM FENCING_RESOURCE_PRIMARY_VM -inf: PRIMARY_VM_NAME

4. On the primary host as root, create a cluster resource for a fencing device for the secondary VM:

   # crm configure primitive FENCING_RESOURCE_SECONDARY_VM stonith:fence_gce \
     op monitor interval="300s" timeout="120s" \
     op start interval="0" timeout="60s" \
     params port="SECONDARY_VM_NAME" zone="SECONDARY_VM_ZONE" \
     project="CLUSTER_PROJECT_ID" \
     pcmk_reboot_timeout=300 pcmk_monitor_retries=4

5. Configure the location of the fencing device for the secondary VM so that it is active on only the primary VM:

   # crm configure location FENCING_LOCATION_NAME_SECONDARY_VM \
     FENCING_RESOURCE_SECONDARY_VM -inf: "SECONDARY_VM_NAME"

6. Confirm the newly created configuration:

   # crm config show related:FENCING_RESOURCE_SECONDARY_VM

   You should see output similar to the following example:

   primitive FENCING_RESOURCE_SECONDARY_VM stonith:fence_gce \
           op monitor interval=300s timeout=120s \
           op start interval=0 timeout=60s \
           params SECONDARY_VM_NAME zone=SECONDARY_ZONE project=CLUSTER_PROJECT_ID pcmk_reboot_timeout=300 pcmk_monitor_retries=4 pcmk_delay_max=30
   location FENCING_RESOURCE_SECONDARY_VM FENCING_RESOURCE_SECONDARY_VM -inf: SECONDARY_VM_NAME

Set a delay for the restart of Corosync

1. On both hosts as root, create a systemd drop-in file that delays the startup of Corosync to ensure the proper sequence of events after a fenced VM is rebooted:

   systemctl edit corosync.service

2. Add the following lines to the file:

   [Service]
   ExecStartPre=/bin/sleep 60

3. Save the file and exit the editor.

4. Reload the systemd manager configuration.

   systemctl daemon-reload

5. Confirm the drop-in file was created:

   service corosync status

   You should see a line for the drop-in file, as shown in the following example:

   ● corosync.service - Corosync Cluster Engine
      Loaded: loaded (/usr/lib/systemd/system/corosync.service; disabled; vendor preset: disabled)
     Drop-In: /etc/systemd/system/corosync.service.d
              └─override.conf
      Active: active (running) since Tue 2021-07-20 23:45:52 UTC; 2 days ago

Create the file system resources

If you're using a Simple Mount setup, then you skip this section because a Simple Mount setup doesn't use instance specific file system resources that are managed by the cluster.

Now that you have created the shared file system directories, you can define the cluster resources.

1. Configure the file system resources for the instance specific directories.

   # crm configure primitive ASCS_FILE_SYSTEM_RESOURCE Filesystem \
   device="NFS_PATH/usrsapSIDASCSASCS_INSTANCE_NUMBER" \
   directory="/usr/sap/SID/ASCSASCS_INSTANCE_NUMBER" fstype="nfs" \
   op start timeout=60s interval=0 \
   op stop timeout=60s interval=0 \
   op monitor interval=20s timeout=40s

   Replace the following:

   • ASCS_FILE_SYSTEM_RESOURCE: specify a name for for the cluster resource for the ASCS file system.
   • NFS_PATH: specify the path to the NFS file system for ASCS.
   • SID: specify the system ID (SID). Use uppercase for any letters.
   • ASCS_INSTANCE_NUMBER: specify the ASCS instance number.

   # crm configure primitive ERS_FILE_SYSTEM_RESOURCE Filesystem \
   device="NFS_PATH/usrsapSIDERSERS_INSTANCE_NUMBER" \
   directory="/usr/sap/SID/ERSERS_INSTANCE_NUMBER" fstype="nfs" \
   op start timeout=60s interval=0 \
   op stop timeout=60s interval=0 \
   op monitor interval=20s timeout=40s

   Replace the following:

   • ERS_FILE_SYSTEM_RESOURCE: specify a name for for the cluster resource for the ERS file system.
   • NFS_PATH: specify the path to the NFS file system for ERS.
   • SID: specify the system ID (SID). Use uppercase for any letters.
   • ERS_INSTANCE_NUMBER: specify the ASCS instance number.

2. Confirm the newly created configuration:

   # crm configure show ASCS_FILE_SYSTEM_RESOURCE ERS_FILE_SYSTEM_RESOURCE

   You should see output similar to the following example:

   primitive ASCS_FILE_SYSTEM_RESOURCE Filesystem \
       params device="NFS_PATH/usrsapSIDASCSASCS_INSTANCE_NUMBER" directory="/usr/sap/SID/ASCSASCS_INSTANCE_NUMBER" fstype=nfs \
       op start timeout=60s interval=0 \
       op stop timeout=60s interval=0 \
       op monitor interval=20s timeout=40s
   primitive ERS_FILE_SYSTEM_RESOURCE Filesystem \
       params device="NFS_PATH/usrsapSIDERSERS_INSTANCE_NUMBER" directory="/usr/sap/SID/ERSERS_INSTANCE_NUMBER" fstype=nfs \
       op start timeout=60s interval=0 \
       op stop timeout=60s interval=0 \
       op monitor interval=20s timeout=40s

Create the health check resources

1. Configure the cluster resources for the ASCS and ERS health checks:

   # crm configure primitive ASCS_HEALTH_CHECK_RESOURCE anything \
     params binfile="/usr/bin/socat" \
     cmdline_options="-U TCP-LISTEN:ASCS_HEALTHCHECK_PORT_NUM,backlog=10,fork,reuseaddr /dev/null" \
     op monitor timeout=20s interval=10s \
     op_params depth=0

   # crm configure primitive ERS_HEALTH_CHECK_RESOURCE anything \
     params binfile="/usr/bin/socat" \
     cmdline_options="-U TCP-LISTEN:ERS_HEALTHCHECK_PORT_NUM,backlog=10,fork,reuseaddr /dev/null" \
     op monitor timeout=20s interval=10s \
     op_params depth=0

2. Confirm the newly created configuration:

   # crm configure show ERS_HEALTH_CHECK_RESOURCE ASCS_HEALTH_CHECK_RESOURCE

   You should see output similar to the following example:

   primitive ERS_HEALTH_CHECK_RESOURCE anything \
           params binfile="/usr/bin/socat" cmdline_options="-U TCP-LISTEN:ASCS_HEALTHCHECK_PORT_NUM,backlog=10,fork,reuseaddr /dev/null" \
           op monitor timeout=20s interval=10s \
           op_params depth=0
       primitive ASCS_HEALTH_CHECK_RESOURCE anything \
           params binfile="/usr/bin/socat" cmdline_options="-U TCP-LISTEN:ERS_HEALTHCHECK_PORT_NUM,backlog=10,fork,reuseaddr /dev/null" \
           op monitor timeout=20s interval=10s \
           op_params depth=0

Create the VIP resources

Define the cluster resources for the VIP addresses.

1. If you need to look up the numerical VIP address, you can use:

   • gcloud compute addresses describe ASCS_VIP_NAME
--region=CLUSTER_REGION --format="value(address)"
   • gcloud compute addresses describe ERS_VIP_NAME
--region=CLUSTER_REGION --format="value(address)"

2. Create the cluster resources for the ASCS and ERS VIPs.

   # crm configure primitive ASCS_VIP_RESOURCE IPaddr2 \
    params ip=ASCS_VIP_ADDRESS cidr_netmask=32 nic="eth0" \
    op monitor interval=3600s timeout=60s

   # crm configure primitive ERS_VIP_RESOURCE IPaddr2 \
    params ip=ERS_VIP_ADDRESS cidr_netmask=32 nic="eth0" \
    op monitor interval=3600s timeout=60s

3. Confirm the newly created configuration:

   # crm configure show ASCS_VIP_RESOURCE ERS_VIP_RESOURCE

   You should see output similar to the following example:

       primitive ASCS_VIP_RESOURCE IPaddr2 \
           params ip=ASCS_VIP_ADDRESS cidr_netmask=32 nic=eth0 \
           op monitor interval=3600s timeout=60s
       primitive ERS_VIP_RESOURCE IPaddr2 \
           params ip=ERS_VIP_RESOURCE cidr_netmask=32 nic=eth0 \
           op monitor interval=3600s timeout=60s

View the defined resources

1. To see all of the resources that you have defined so far, enter the following command:

   # crm status

   You should see output similar to the following example:

   Stack: corosync
   Current DC: nw-ha-vm-1 (version 1.1.24+20201209.8f22be2ae-3.12.1-1.1.24+20201209.8f22be2ae) - partition with quorum
   Last updated: Wed May 26 19:10:10 2021
   Last change: Tue May 25 23:48:35 2021 by root via cibadmin on nw-ha-vm-1
   
   2 nodes configured
   8 resource instances configured
   
                 *** Resource management is DISABLED ***
     The cluster will not attempt to start, stop or recover services
   
   Online: [ nw-ha-vm-1 nw-ha-vm-2 ]
   
   Full list of resources:
   
    fencing-rsc-nw-aha-vm-1        (stonith:fence_gce):    Stopped (unmanaged)
    fencing-rsc-nw-aha-vm-2        (stonith:fence_gce):    Stopped (unmanaged)
    filesystem-rsc-nw-aha-ascs      (ocf::heartbeat:Filesystem):    Stopped (unmanaged)
    filesystem-rsc-nw-aha-ers      (ocf::heartbeat:Filesystem):    Stopped (unmanaged)
    health-check-rsc-nw-ha-ascs     (ocf::heartbeat:anything):      Stopped (unmanaged)
    health-check-rsc-nw-ha-ers     (ocf::heartbeat:anything):      Stopped (unmanaged)
    vip-rsc-nw-aha-ascs     (ocf::heartbeat:IPaddr2):       Stopped (unmanaged)
    vip-rsc-nw-aha-ers     (ocf::heartbeat:IPaddr2):       Stopped (unmanaged)

   If you're using a Simple Mount setup, then you see an output similar to the following example:

   Stack: corosync
   Current DC: nw-ha-vm-1 (version 1.1.24+20201209.8f22be2ae-3.12.1-1.1.24+20201209.8f22be2ae) - partition with quorum
   Last updated: Wed Sep 26 19:10:10 2024
   Last change: Tue Sep 25 23:48:35 2024 by root via cibadmin on nw-ha-vm-1
   
   2 nodes configured
   8 resource instances configured
   
                 *** Resource management is DISABLED ***
     The cluster will not attempt to start, stop or recover services
   
   Online: [ nw-ha-vm-1 nw-ha-vm-2 ]
   
   Full list of resources:
   
    fencing-rsc-nw-aha-vm-1        (stonith:fence_gce):    Stopped (unmanaged)
    fencing-rsc-nw-aha-vm-2        (stonith:fence_gce):    Stopped (unmanaged)
    health-check-rsc-nw-ha-ascs     (ocf::heartbeat:anything):      Stopped (unmanaged)
    health-check-rsc-nw-ha-ers     (ocf::heartbeat:anything):      Stopped (unmanaged)
    vip-rsc-nw-aha-ascs     (ocf::heartbeat:IPaddr2):       Stopped (unmanaged)
    vip-rsc-nw-aha-ers     (ocf::heartbeat:IPaddr2):       Stopped (unmanaged)

Install ASCS and ERS

The following section covers only the requirements and recommendations that are specific to installing SAP NetWeaver on Google Cloud.

For complete installation instructions, see the SAP NetWeaver documentation.

Prepare for installation

To ensure consistency across the cluster and simplify installation, before you install the SAP NetWeaver ASCS and ERS components, define the users, groups, and permissions and put the secondary server in standby mode.

1. Take the cluster out of maintenance mode:

   # crm configure property maintenance-mode="false"

2. On both servers as root, enter the following commands, specifying the user and group IDs that are appropriate for your environment:

   # groupadd -g GID_SAPINST sapinst
   # groupadd -g GID_SAPSYS sapsys
   # useradd -u UID_SIDADM SID_LCadm -g sapsys
   # usermod -a -G sapinst SID_LCadm
   # useradd -u UID_SAPADM sapadm -g sapinst
   
   # chown SID_LCadm:sapsys /usr/sap/SID/SYS
   # chown SID_LCadm:sapsys /sapmnt/SID -R
   # chown SID_LCadm:sapsys /usr/sap/trans -R
   # chown SID_LCadm:sapsys /usr/sap/SID/SYS -R
   # chown SID_LCadm:sapsys /usr/sap/SID -R

   If you're using a Simple Mount setup, then run the following commands instead, on both servers as root. Specify the user and group IDs that are appropriate for your environment.

   # groupadd -g GID_SAPINST sapinst
   # groupadd -g GID_SAPSYS sapsys
   # useradd -u UID_SIDADM SID_LCadm -g sapsys
   # usermod -a -G sapinst SID_LCadm
   # useradd -u UID_SAPADM sapadm -g sapinst
   
   # chown SID_LCadm:sapsys /usr/sap/SID
   # chown SID_LCadm:sapsys /sapmnt/SID -R
   # chown SID_LCadm:sapsys /usr/sap/trans -R
   # chown SID_LCadm:sapsys /usr/sap/SID -R
   # chown SID_LCadm:sapsys /usr/sap/SID/SYS

   Replace the following:

   • GID_SAPINST: specify the Linux group ID for the SAP provisioning tool.
   • GID_SAPSYS: specify the Linux group ID for the SAPSYS user.
   • UID_SIDADM: specify the Linux user ID for the administrator of the SAP system (SID).
   • SID_LC: specify the system ID (SID). Use lowercase for any letters.
   • UID_SAPADM: specify the user ID for the SAP Host Agent.
   • SID: specify the system ID (SID). Use uppercase for any letters.

   For example, the following shows a practical GID and UID numbering scheme:

   Group sapinst      1001
   Group sapsys       1002
   Group dbhshm       1003
   
   User  en2adm       2001
   User  sapadm       2002
   User  dbhadm       2003

Install the ASCS component

1. On the secondary server, enter the following command to put the secondary server in standby mode:

   # crm_standby -v on -N ${HOSTNAME};

   Putting the secondary server in standby mode consolidates all of the cluster resources on the primary server, which simplifies installation.

2. Confirm that the secondary server is in standby mode:

   # crm status

   The output is similar to the following example:

   Stack: corosync
    Current DC: nw-ha-vm-1 (version 1.1.24+20201209.8f22be2ae-3.12.1-1.1.24+20201209.8f22be2ae) - partition with quorum
    Last updated: Thu May 27 17:45:16 2021
    Last change: Thu May 27 17:45:09 2021 by root via crm_attribute on nw-ha-vm-2
   
    2 nodes configured
    8 resource instances configured
   
    Node nw-ha-vm-2: standby
    Online: [ nw-ha-vm-1 ]
   
    Full list of resources:
   
     fencing-rsc-nw-aha-vm-1        (stonith:fence_gce):    Stopped
     fencing-rsc-nw-aha-vm-2        (stonith:fence_gce):    Started nw-ha-vm-1
     filesystem-rsc-nw-aha-scs      (ocf::heartbeat:Filesystem):    Started nw-ha-vm-1
     filesystem-rsc-nw-aha-ers      (ocf::heartbeat:Filesystem):    Started nw-ha-vm-1
     health-check-rsc-nw-ha-scs     (ocf::heartbeat:anything):      Started nw-ha-vm-1
     health-check-rsc-nw-ha-ers     (ocf::heartbeat:anything):      Started nw-ha-vm-1
     vip-rsc-nw-aha-scs     (ocf::heartbeat:IPaddr2):       Started nw-ha-vm-1
     vip-rsc-nw-aha-ers     (ocf::heartbeat:IPaddr2):       Started nw-ha-vm-1
   

   If you're using a Simple Mount setup, then the output is similar to the following:

   Stack: corosync
    Current DC: nw-ha-vm-1 (version 1.1.24+20201209.8f22be2ae-3.12.1-1.1.24+20201209.8f22be2ae) - partition with quorum
    Last updated: Wed Sep 26 19:30:10 2024
    Last change: Tue Sep 25 23:58:35 2024 by root via crm_attribute on nw-ha-vm-2
   
    2 nodes configured
    8 resource instances configured
   
    Node nw-ha-vm-2: standby
    Online: [ nw-ha-vm-1 ]
   
    Full list of resources:
   
     fencing-rsc-nw-aha-vm-1        (stonith:fence_gce):    Stopped
     fencing-rsc-nw-aha-vm-2        (stonith:fence_gce):    Started nw-ha-vm-1
     health-check-rsc-nw-ha-scs     (ocf::heartbeat:anything):      Started nw-ha-vm-1
     health-check-rsc-nw-ha-ers     (ocf::heartbeat:anything):      Started nw-ha-vm-1
     vip-rsc-nw-aha-scs     (ocf::heartbeat:IPaddr2):       Started nw-ha-vm-1
     vip-rsc-nw-aha-ers     (ocf::heartbeat:IPaddr2):       Started nw-ha-vm-1
   

3. On the primary server as the root user, change your directory to a temporary installation directory, such as /tmp, to install the ASCS instance by running the SAP Software Provisioning Manager (SWPM).

   • To access the web interface of SWPM, you need the password for the root user. If your IT policy does not allow the SAP administrator to have access to the root password, you can use the SAPINST_REMOTE_ACCESS_USER.

   • When you start SWPM, use the SAPINST_USE_HOSTNAME parameter to specify the virtual host name that you defined for the ASCS VIP address in the /etc/hosts file.

     For example:

     cd /tmp; /mnt/nfs/install/SWPM/sapinst SAPINST_USE_HOSTNAME=vh-aha-scs

   • On the final SWPM confirmation page, ensure that the virtual host name is correct.

4. After the configuration completes, take the secondary VM out of standby mode:

   # crm_standby -v off -N ${HOSTNAME}; # On SECONDARY

Install the ERS component

1. On the primary server as root or SID_LCadm, stop the ASCS service.

   # su - SID_LCadm -c "sapcontrol -nr ASCS_INSTANCE_NUMBER -function Stop"
   # su - SID_LCadm -c "sapcontrol -nr ASCS_INSTANCE_NUMBER -function StopService"

2. On the primary server, enter the following command to put the primary server in standby mode:

   # crm_standby -v on -N ${HOSTNAME};

   Putting the primary server in standby mode consolidates all of the cluster resources on the secondary server, which simplifies installation.

3. Confirm that the primary server is in standby mode:

   # crm status

4. On the secondary server as the root user, change your directory to a temporary installation directory, such as /tmp, to install the ERS instance by running the SAP Software Provisioning Manager (SWPM).

   • Use the same user and password to access SWPM that you used when you installed the ASCS component.

   • When you start SWPM, use the SAPINST_USE_HOSTNAME parameter to specify the virtual host name that you defined for the ERS VIP address in the /etc/hosts file.

     For example:

     cd /tmp; /mnt/nfs/install/SWPM/sapinst SAPINST_USE_HOSTNAME=vh-aha-ers

   • On the final SWPM confirmation page, ensure that the virtual host name is correct.

5. Take the primary VM out of standby to have both active:

   # crm_standby -v off -N ${HOSTNAME};

Configure the SAP services

You need to confirm that the services are configured correctly, check the settings in the ASCS and ERS profiles, and add the SID_LCadm user to the haclient user group.

Confirm the SAP service entries

1. On both servers, confirm that your /usr/sap/sapservices file contains entries for both the ASCS and ERS services. To do this, you can use the systemV or systemd integration.

   You can add any missing entries by using the sapstartsrv command with the pf=PROFILE_OF_THE_SAP_INSTANCE and -reg options.

   For more information about these integrations, see the following SAP Notes:

   • 3139184 - Linux: systemd integration for sapstartsrv and SAP Host Agent

   • 3115048 - sapstartsrv with native Linux systemd support

   systemV

   The following is an example of how the entries for the ASCS and ERS services in the /usr/sap/sapservices file when you're using the systemV integration:

   # LD_LIBRARY_PATH=/usr/sap/hostctrl/exe:$LD_LIBRARY_PATH; export LD_LIBRARY_PATH
   /usr/sap/hostctrl/exe/sapstartsrv \
   pf=/usr/sap/SID/SYS/profile/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME \
   -D -u SID_LCadm
   /usr/sap/hostctrl/exe/sapstartsrv \
   pf=/usr/sap/SID/SYS/profile/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME \
   -D -u SID_LCadm

   systemd

   1. Verify that your /usr/sap/sapservices file contains entries for the ASCS and ERS services. The following is an example of how these entries appear in the /usr/sap/sapservices file when you're using the systemd integration:

      systemctl --no-ask-password start SAPSID_ASCS_INSTANCE_NUMBER # sapstartsrv pf=/usr/sap/SID/SYS/profile/SID_ASCSASCS_INSTANCE_NUMBER_SID_LCascs
      systemctl --no-ask-password start SAPSID_ERS_INSTANCE_NUMBER # sapstartsrv pf=/usr/sap/SID/SYS/profile/SID_ERSERS_INSTANCE_NUMBER_SID_LCers

   2. Disable the systemd integration on the ASCS and the ERS instances:

      Caution: Disabling the systemd integration also stops the SAP instances.

      # systemctl disable SAPSID_ASCS_INSTANCE_NUMBER.service
      # systemctl stop SAPSID_ASCS_INSTANCE_NUMBER.service
      # systemctl disable SAPSID_ERS_INSTANCE_NUMBER.service
      # systemctl stop SAPSID_ERS_INSTANCE_NUMBER.service
      

   3. Verify that the systemd integration is disabled:

      # systemctl list-unit-files | grep sap

      An output similar to the following example means that the systemd integration is disabled. Note that some services, such as saphostagent and saptune, are enabled, and some services are disabled.

      SAPSID_ASCS_INSTANCE_NUMBER.service disabled
      SAPSID_ERS_INSTANCE_NUMBER.service disabled
      saphostagent.service enabled
      sapinit.service generated
      saprouter.service disabled
      saptune.service enabled

      For more information, see the SUSE document Disabling systemd services of the ASCS and the ERS SAP instances.

Stop the SAP services

1. On the secondary server, stop the ERS service:

   # su - SID_LCadm -c "sapcontrol -nr ERS_INSTANCE_NUMBER -function Stop"
   # su - SID_LCadm -c "sapcontrol -nr ERS_INSTANCE_NUMBER -function StopService"

2. On each server, validate that all services are stopped:

   # su - SID_LCadm -c "sapcontrol -nr ASCS_INSTANCE_NUMBER -function GetSystemInstanceList"
   # su - SID_LCadm -c "sapcontrol -nr ERS_INSTANCE_NUMBER -function GetSystemInstanceList"

   You should see output similar to the following example:

   GetSystemInstanceList
   FAIL: NIECONN_REFUSED (Connection refused), NiRawConnect failed in plugin_fopen()

Enable sapping and sappong

Because the start and stop procedures in the cluster are managed by Pacemaker, you need to ensure that sapstartsrv doesn't initiate automatically during system boot. During system boot, sapping runs prior to sapinit, which hides the sapservices files. Upon the completion of sapinit, sappong unhides the sapservices files.

To activate this flow, you need to enable the systemd services sapping and sappong by using the following commands:

# systemctl enable sapping sappong
# systemctl status sapping sappong

Edit the ASCS and ERS profiles

1. On either server, switch to the profile directory, by using either of the following commands:

   # cd /usr/sap/SID/SYS/profile

   # cd /sapmnt/SID/profile

2. If necessary, you can find the files names of your ASCS and ERS profiles by listing the files in the profile directory or use the following formats:

   SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME

   SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME

3. Enable the package sap-suse-cluster-connector by adding the following lines to the profiles ASCS and ERS instance profiles:

   #-----------------------------------------------------------------------
   # SUSE HA library
   #-----------------------------------------------------------------------
   service/halib = $(DIR_CT_RUN)/saphascriptco.so
   service/halib_cluster_connector = /usr/bin/sap_suse_cluster_connector
   

4. If you are using ENSA1, enable the keepalive function by setting the following in the ASCS profile:

   enque/encni/set_so_keepalive = true

   For more information, see SAP Note 1410736 - TCP/IP: setting keepalive interval.

5. If necessary, edit the ASCS and ERS profiles to change the startup behavior of the Enqueue Server and the Enqueue Replication Server.

   ENSA1

   In the "Start SAP enqueue server" section of the ASCS profile, if you see Restart_Program_NN, change "Restart" to "Start", as shown in the following example.

   Start_Program_01 = local $(_EN) pf=$(_PF)

   In the "Start enqueue replication server" section of the ERS profile, if you see Restart_Program_NN, change "Restart" to "Start", as shown in the following example.

   Start_Program_00 = local $(_ER) pf=$(_PFL) NR=$(SCSID)

   ENSA2

   In the "Start SAP enqueue server" section of the ASCS profile, if you see Restart_Program_NN, change "Restart" to "Start", as shown in the following example.

   Start_Program_01 = local $(_ENQ) pf=$(_PF)

   In the "Start enqueue replicator" section of the ERS profile, if you see Restart_Program_NN, change "Restart" to "Start", as shown in the following example.

   Start_Program_00 = local $(_ENQR) pf=$(_PF) ...

Add the sidadm user to the haclient user group

When you installed the sap-suse-cluster-connector, the installation created an haclient user group. To enable the SID_LCadm user to work with the cluster, add it to the haclient user group.

1. On both servers, add the SID_LCadm user to the haclient user group:

   # usermod -aG haclient SID_LCadm

Configure the cluster resources for ASCS and ERS

1. As root from either server, place the cluster in maintenance mode:

   # crm configure property maintenance-mode="true"

2. Confirm that the cluster is in maintenance mode:

   # crm status

   If the cluster is in maintenance mode, the status includes the following lines:

                 *** Resource management is DISABLED ***
   The cluster will not attempt to start, stop or recover services

3. If you're using a Simple Mount setup, then create the sapstartsrv cluster resources for the ASCS and ERS services. If you're not using a Simple Mount setup, then skip this step.

   1. For ASCS, create a configuration file named sapstartsrv_scs.txt with the following content:

      primitive rsc_SAPStartSrv_SID_ASCSINSTANCENUMBER ocf:suse:SAPStartSrv \
      params InstanceName=SID_ASCSINSTANCE_NUMBER_ASCS_VIRTUAL_HOSTNAME

   2. To load the configuration for ASCS, run the following command:

      # crm configure load update sapstartsrv_scs.txt

   3. For ERS, create a configuration file named sapstartsrv_ers.txt with the following content:

      primitive rsc_SAPStartSrv_SID_ERSINSTANCENUMBER ocf:suse:SAPStartSrv \
      params InstanceName=SID_ERSINSTANCE_NUMBER_ERS_VIRTUAL_HOSTNAME

   4. To load the configuration for ERS, run the following command:

      # crm configure load update sapstartsrv_ers.txt

4. Create the cluster resources for the ASCS and ERS services:

   ENSA1

   1. Create the cluster resource for the ASCS instance. The value of InstanceName is the name of the instance profile that SWPM generated when you installed ASCS.

      # crm configure primitive ASCS_INSTANCE_RESOURCE SAPInstance \
        operations \$id=ASCS_INSTANCE_RSC_OPERATIONS_NAME \
        op monitor interval=11 timeout=60 on-fail=restart \
        params InstanceName=SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME \
           START_PROFILE="/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME" \
           AUTOMATIC_RECOVER=false \
        meta resource-stickiness=5000 failure-timeout=60 \
           migration-threshold=1 priority=10

      In you're using a Simple Mount setup, then run the following command instead:

      # crm configure primitive ASCS_INSTANCE_RESOURCE SAPInstance \
        operations \$id=ASCS_INSTANCE_RSC_OPERATIONS_NAME \
        op monitor interval=11 timeout=60 on-fail=restart \
        params InstanceName=SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME \
           START_PROFILE="/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME" \
           AUTOMATIC_RECOVER=false MINIMAL_PROBE=true \
        meta resource-stickiness=5000 failure-timeout=60 \
           migration-threshold=1 priority=10

   2. Create the cluster resource for the ERS instance. The value of InstanceName is the name of the instance profile that SWPM generated when you installed ERS. The parameter IS_ERS=true tells Pacemaker to set the runsersSID flag to 1 on the node where ERS is active.

      # crm configure primitive ERS_INSTANCE_RESOURCE SAPInstance \
        operations \$id=ERS_INSTANCE_RSC_OPERATIONS_NAME \
        op monitor interval=11 timeout=60 on-fail=restart \
        params InstanceName=SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME  \
           START_PROFILE="/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME" \
           AUTOMATIC_RECOVER=false IS_ERS=true \
        meta priority=1000

      In you're using a Simple Mount setup, then run the following command instead:

      # crm configure primitive ERS_INSTANCE_RESOURCE SAPInstance \
        operations \$id=ERS_INSTANCE_RSC_OPERATIONS_NAME \
        op monitor interval=11 timeout=60 on-fail=restart \
        params InstanceName=SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME  \
           START_PROFILE="/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME" \
           AUTOMATIC_RECOVER=false MINIMAL_PROBE=true IS_ERS=true \
        meta priority=1000

   3. Confirm the newly created configuration:

      # crm configure show ASCS_INSTANCE_RESOURCE ERS_INSTANCE_RESOURCE

      The output similar to the following example:

      primitive ASCS_INSTANCE_RESOURCE SAPInstance \
      operations $id=ASCS_INSTANCE_RSC_OPERATIONS_NAME \
      op monitor interval=11 timeout=60 on-fail=restart \
      params InstanceName=SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME START_PROFILE="/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME" AUTOMATIC_RECOVER=false \
      meta resource-stickiness=5000 failure-timeout=60 migration-threshold=1 priority=10
      
      
      primitive ERS_INSTANCE_RESOURCE SAPInstance \
      operations $id=ERS_INSTANCE_RSC_OPERATIONS_NAME \
      op monitor interval=11 timeout=60 on-fail=restart \
      params InstanceName=SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME START_PROFILE="/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME" AUTOMATIC_RECOVER=false IS_ERS=true \
      meta priority=1000
      

      If you're using a Simple Mount setup, then the output is similar to the following example:

      primitive ASCS_INSTANCE_RESOURCE SAPInstance \
      operations $id=ASCS_INSTANCE_RSC_OPERATIONS_NAME \
      op monitor interval=11 timeout=60 on-fail=restart \
      params InstanceName=SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME START_PROFILE="/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME" AUTOMATIC_RECOVER=false MINIMAL_PROBE=true \
      meta resource-stickiness=5000 failure-timeout=60 migration-threshold=1 priority=10
      
      
      primitive ERS_INSTANCE_RESOURCE SAPInstance \
      operations $id=ERS_INSTANCE_RSC_OPERATIONS_NAME \
      op monitor interval=11 timeout=60 on-fail=restart \
      params InstanceName=SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME START_PROFILE="/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME" AUTOMATIC_RECOVER=false MINIMAL_PROBE=true IS_ERS=true \
      meta priority=1000
      

   ENSA2

   1. Create the cluster resource for the ASCS instance. The value of InstanceName is the name of the instance profile that SWPM generated when you installed ASCS.

      # crm configure primitive ASCS_INSTANCE_RESOURCE SAPInstance \
        operations \$id=ASCS_INSTANCE_RSC_OPERATIONS_NAME \
        op monitor interval=11 timeout=60 on-fail=restart \
        params InstanceName=SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME \
           START_PROFILE="/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME" \
           AUTOMATIC_RECOVER=false \
        meta resource-stickiness=5000 failure-timeout=60

      If you're using a Simple Mount setup, then run the following command instead:

      # crm configure primitive ASCS_INSTANCE_RESOURCE SAPInstance \
        operations \$id=ASCS_INSTANCE_RSC_OPERATIONS_NAME \
        op monitor interval=11 timeout=60 on-fail=restart \
        params InstanceName=SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME \
           START_PROFILE="/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME" \
           AUTOMATIC_RECOVER=false MINIMAL_PROBE=true \
        meta resource-stickiness=5000 failure-timeout=60

   2. Create the cluster resource for the ERS instance. The value of InstanceName is the name of the instance profile that SWPM generated when you installed ERS.

      # crm configure primitive ERS_INSTANCE_RESOURCE SAPInstance \
        operations \$id=ERS_INSTANCE_RSC_OPERATIONS_NAME \
        op monitor interval=11 timeout=60 on-fail=restart \
        params InstanceName=SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME  \
           START_PROFILE="/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME" \
           AUTOMATIC_RECOVER=false IS_ERS=true

      If you're using a Simple Mount setup, then run the following command instead:

      # crm configure primitive ERS_INSTANCE_RESOURCE SAPInstance \
        operations \$id=ERS_INSTANCE_RSC_OPERATIONS_NAME \
        op monitor interval=11 timeout=60 on-fail=restart \
        params InstanceName=SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME  \
           START_PROFILE="/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME" \
           AUTOMATIC_RECOVER=false IS_ERS=true MINIMAL_PROBE=true \
           meta priority=1000

   3. Confirm the newly created configuration:

      # crm configure show ASCS_INSTANCE_RESOURCE ERS_INSTANCE_RESOURCE

      The output similar to the following example:

      primitive ASCS_INSTANCE_RESOURCE SAPInstance \
      operations $id=ASCS_INSTANCE_RSC_OPERATIONS_NAME \
      op monitor interval=11 timeout=60 on-fail=restart \
      params InstanceName=SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME START_PROFILE="/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME" AUTOMATIC_RECOVER=false \
      meta resource-stickiness=5000 failure-timeout=60
      
      
      primitive ERS_INSTANCE_RESOURCE SAPInstance \
      operations $id=ERS_INSTANCE_RSC_OPERATIONS_NAME \
      op monitor interval=11 timeout=60 on-fail=restart \
      params InstanceName=SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME START_PROFILE="/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME" AUTOMATIC_RECOVER=false IS_ERS=true \
      

      If you're using a Simple Mount setup, then the output is similar to the following:

      primitive ASCS_INSTANCE_RESOURCE SAPInstance \
      operations $id=ASCS_INSTANCE_RSC_OPERATIONS_NAME \
      op monitor interval=11 timeout=60 on-fail=restart \
      params InstanceName=SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME START_PROFILE="/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME" AUTOMATIC_RECOVER=false MINIMAL_PROBE=true \
      meta resource-stickiness=5000 failure-timeout=60 \
      migration-threshold=1 priority=10
      
      
      primitive ERS_INSTANCE_RESOURCE SAPInstance \
      operations $id=ERS_INSTANCE_RSC_OPERATIONS_NAME \
      op monitor interval=11 timeout=60 on-fail=restart \
      params InstanceName=SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME START_PROFILE="/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME" AUTOMATIC_RECOVER=false MINIMAL_PROBE=true IS_ERS=true \
      meta priority=1000

Configure the resource groups and location constraints

1. Group the ASCS and ERS resources. You can display the names of all your previously defined resources by entering the command crm resource status:

   • # crm configure group ASCS_RESOURCE_GROUP ASCS_FILE_SYSTEM_RESOURCE \
       ASCS_HEALTH_CHECK_RESOURCE ASCS_VIP_RESOURCE \
       ASCS_INSTANCE_RESOURCE \
       meta resource-stickiness=3000

     If you're using a Simple Mount setup, then run the following command instead:

     # crm configure group ASCS_RESOURCE_GROUP ASCS_SAPSTARTSRV_RESOURCE \
       ASCS_HEALTH_CHECK_RESOURCE ASCS_VIP_RESOURCE \
       ASCS_INSTANCE_RESOURCE \
       meta resource-stickiness=3000

     Replace the following:
     • ASCS_RESOURCE_GROUP: specify a unique group name for the ASCS cluster resources. You can ensure uniqueness by using a convention such as SID_LC_ASCSINSTANCE_NUMBER_group. For example, nw1_ASCS00_group.
     • ASCS_FILE_SYSTEM_RESOURCE: specify the name of the cluster resource that you defined for the ASCS file system earlier. This placeholder variable is not applicable when you're using a Simple Mount setup.
     • ASCS_SAPSTARTSRV_RESOURCE: specify the name of the cluster resource that you defined for the ASCS `sapstartsrv` earlier. This placeholder variable is applicable only when you're using a Simple Mount setup.
     • ASCS_HEALTH_CHECK_RESOURCE: specify the name of the cluster resource that you defined for the ASCS health check earlier.
     • ASCS_VIP_RESOURCE: specify the name of the cluster resource that you defined for the ASCS VIP earlier.
     • ASCS_INSTANCE_RESOURCE: specify the name of the cluster resource that you defined for the ASCS instance earlier.

   • # crm configure group ERS_RESOURCE_GROUP ERS_FILE_SYSTEM_RESOURCE \
       ERS_HEALTH_CHECK_RESOURCE ERS_VIP_RESOURCE \
       ERS_INSTANCE_RESOURCE

     If you're using a Simple Mount setup, then run the following command instead:

     # crm configure group ERS_RESOURCE_GROUP ERS_SAPSTARTSRV_RESOURCE \
       ERS_HEALTH_CHECK_RESOURCE ERS_VIP_RESOURCE \
       ERS_INSTANCE_RESOURCE

     Replace the following:
     • ERS_RESOURCE_GROUP: specify a unique group name for the ERS cluster resources. You can ensure uniqueness by using a convention like "SID_ERSinstance number_group". For example, nw1_ERS10_group.
     • ERS_SAPSTARTSRV_RESOURCE: specify the name of the cluster resource that you defined for the ERS `sapstartsrv` earlier. This placeholder variable is applicable only when you're using a Simple Mount setup.
     • ERS_FILE_SYSTEM_RESOURCE: specify the name of the cluster resource that you defined for the ERS file system earlier. This placeholder variable is not applicable when you're using a Simple Mount setup.
     • ERS_HEALTH_CHECK_RESOURCE: specify the name of the cluster resource that you defined for the ERS health check earlier.
     • ERS_VIP_RESOURCE: specify the name of the cluster resource that you defined for the ERS VIP earlier.
     • ERS_INSTANCE_RESOURCE: specify the name of the cluster resource that you defined for the ERS instance earlier.

2. Confirm the newly created configuration:

   # crm configure show type:group

   The output similar to the following example:

   group ERS_RESOURCE_GROUP ERS_FILE_SYSTEM_RESOURCE ERS_HEALTH_CHECK_RESOURCE ERS_VIP_RESOURCE ERS_INSTANCE_RESOURCE
   group ASCS_RESOURCE_GROUP ASCS_FILE_SYSTEM_RESOURCE ASCS_HEALTH_CHECK_RESOURCE ASCS_VIP_RESOURCE ASCS_INSTANCE_RESOURCE \
           meta resource-stickiness=3000

   If you're using a Simple Mount setup, then the output is similar to the following example:

   group ERS_RESOURCE_GROUP ERS_SAPSTARTSRV_RESOURCE ERS_HEALTH_CHECK_RESOURCE ERS_VIP_RESOURCE ERS_INSTANCE_RESOURCE
   group ASCS_RESOURCE_GROUP ASCS_SAPSTARTSRV_RESOURCE ASCS_HEALTH_CHECK_RESOURCE ASCS_VIP_RESOURCE ASCS_INSTANCE_RESOURCE

3. Create the colocation constraints:

   ENSA1

   1. Create a colocation constraint that prevents the ASCS resources from running on the same server as the ERS resources:

      # crm configure colocation PREVENT_SCS_ERS_COLOC -5000: ERS_RESOURCE_GROUP ASCS_RESOURCE_GROUP

   2. Configure ASCS to failover to the server where ERS is running, as determined by the flag runsersSID being equal to 1:

      # crm configure location LOC_SCS_SID_FAILOVER_TO_ERS ASCS_INSTANCE_RESOURCE \
      rule 2000: runs_ers_SID eq 1

   3. Configure ASCS to start before ERS moves to the other server after a failover:

      # crm configure order ORD_SAP_SID_FIRST_START_ASCS \
       Optional: ASCS_INSTANCE_RESOURCE:start \
       ERS_INSTANCE_RESOURCE:stop symmetrical=false

   4. Confirm the newly created configuration:

      # crm configure show type:colocation type:location type:order

      You should see output similar to the following example:

      order ORD_SAP_SID_FIRST_START_ASCS Optional: ASCS_INSTANCE_RESOURCE:start ERS_INSTANCE_RESOURCE:stop symmetrical=false
      colocation PREVENT_SCS_ERS_COLOC -5000: ERS_RESOURCE_GROUP ASCS_RESOURCE_GROUP
      location LOC_SCS_SID_FAILOVER_TO_ERS ASCS_INSTANCE_RESOURCE \
      rule 2000: runs_ers_SID eq 1

   ENSA2

   1. Create a colocation constraint that prevents the ASCS resources from running on the same server as the ERS resources:

      # crm configure colocation PREVENT_SCS_ERS_COLOC -5000: ERS_RESOURCE_GROUP ASCS_RESOURCE_GROUP

   2. Configure ASCS to start before ERS moves to the other server after a failover:

      # crm configure order ORD_SAP_SID_FIRST_START_ASCS \
       Optional: ASCS_INSTANCE_RESOURCE:start \
       ERS_INSTANCE_RESOURCE:stop symmetrical=false

   3. Confirm the newly created configuration:

      # crm configure show type:colocation type:order

      You should see output similar to the following example:

      colocation PREVENT_SCS_ERS_COLOC -5000: ERS_RESOURCE_GROUP ASCS_RESOURCE_GROUP
      order ORD_SAP_SID_FIRST_START_ASCS  Optional: ASCS_INSTANCE_RESOURCE:start ERS_INSTANCE_RESOURCE:stop symmetrical=false

4. Disable maintenance mode.

   # crm configure property maintenance-mode="false"

Validate and test your cluster

This section shows you how to run the following tests:

• Check for configuration errors
• Confirm that the ASCS and ERS resources switch servers correctly during failovers
• Confirm that locks are retained
• Simulate a Compute Engine maintenance event to make sure that live migration doesn't trigger a failover

Check the cluster configuration

1. As root on either server, check which nodes your resources are running on:

   # crm status

   In the following example, the ASCS resources are running on the nw-ha-vm-1 server and the ERS resources are running on the nw-ha-vm-2 server.

   Cluster Summary:
     * Stack: corosync
     * Current DC: nw-ha-vm-2 (version 2.0.4+20200616.2deceaa3a-3.3.1-2.0.4+20200616.2deceaa3a) - partition with quorum
     * Last updated: Thu May 20 16:58:46 2021
     * Last change:  Thu May 20 16:57:31 2021 by ahaadm via crm_resource on nw-ha-vm-2
     * 2 nodes configured
     * 10 resource instances configured
   
   Node List:
     * Online: [ nw-ha-vm-1 nw-ha-vm-2 ]
   
   Active Resources:
     * fencing-rsc-nw-aha-vm-1     (stonith:fence_gce):     Started nw-ha-vm-2
     * fencing-rsc-nw-aha-vm-2     (stonith:fence_gce):     Started nw-ha-vm-1
     * Resource Group: ascs-aha-rsc-group-name:
       * filesystem-rsc-nw-aha-ascs (ocf::heartbeat:Filesystem):     Started nw-ha-vm-1
       * health-check-rsc-nw-ha-ascs        (ocf::heartbeat:anything):       Started nw-ha-vm-1
       * vip-rsc-nw-aha-ascs        (ocf::heartbeat:IPaddr2):        Started nw-ha-vm-1
       * ascs-aha-instance-rsc-name (ocf::heartbeat:SAPInstance):    Started nw-ha-vm-1
     * Resource Group: ers-aha-rsc-group-name:
       * filesystem-rsc-nw-aha-ers (ocf::heartbeat:Filesystem):     Started nw-ha-vm-2
       * health-check-rsc-nw-ha-ers        (ocf::heartbeat:anything):       Started nw-ha-vm-2
       * vip-rsc-nw-aha-ers        (ocf::heartbeat:IPaddr2):        Started nw-ha-vm-2
       * ers-aha-instance-rsc-name (ocf::heartbeat:SAPInstance):    Started nw-ha-vm-2

   If you're using a Simple Mount setup, then the output is similar to the following example:

   Cluster Summary:
     * Stack: corosync
     * Current DC: nw-ha-vm-2 (version 2.0.4+20200616.2deceaa3a-3.3.1-2.0.4+20200616.2deceaa3a) - partition with quorum
     * Last updated: Thu Sep 20 19:44:26 2024
     * Last change:  Thu Sep 20 19:53:41 2024 by ahaadm via crm_resource on nw-ha-vm-2
     * 2 nodes configured
     * 10 resource instances configured
   
   Node List:
     * Online: [ nw-ha-vm-1 nw-ha-vm-2 ]
   
   Active Resources:
     * fencing-rsc-nw-aha-vm-1     (stonith:fence_gce):     Started nw-ha-vm-2
     * fencing-rsc-nw-aha-vm-2     (stonith:fence_gce):     Started nw-ha-vm-1
     * Resource Group: ascs-aha-rsc-group-name:
       * SAPStartSrv-rsc-nw-aha-ascs (ocf::heartbeat:SAPStartSrv):     Started nw-ha-vm-1
       * health-check-rsc-nw-ha-ascs        (ocf::heartbeat:anything):       Started nw-ha-vm-1
       * vip-rsc-nw-aha-ascs        (ocf::heartbeat:IPaddr2):        Started nw-ha-vm-1
       * ascs-aha-instance-rsc-name (ocf::heartbeat:SAPInstance):    Started nw-ha-vm-1
     * Resource Group: ers-aha-rsc-group-name:
       * SAPStartSrv-rsc-nw-aha-ers (ocf::heartbeat:SAPStartSrv):     Started nw-ha-vm-2
       * health-check-rsc-nw-ha-ers        (ocf::heartbeat:anything):       Started nw-ha-vm-2
       * vip-rsc-nw-aha-ers        (ocf::heartbeat:IPaddr2):        Started nw-ha-vm-2
       * ers-aha-instance-rsc-name (ocf::heartbeat:SAPInstance):    Started nw-ha-vm-2
   

2. Switch to the SID_LCadm user:

   # su - SID_LCadm

3. Check the cluster configuration. For INSTANCE_NUMBER, specify the instance number of the ASCS or ERS instance that is active on the server where you are entering the command:

   > sapcontrol -nr INSTANCE_NUMBER -function HAGetFailoverConfig

   HAActive should be TRUE, as shown in the following example:

   20.05.2021 01:33:25
   HAGetFailoverConfig
   OK
   HAActive: TRUE
   HAProductVersion: SUSE Linux Enterprise Server for SAP Applications 15 SP2
   HASAPInterfaceVersion: SUSE Linux Enterprise Server for SAP Applications 15 SP2 (sap_suse_cluster_connector 3.1.2)
   HADocumentation: https://www.suse.com/products/sles-for-sap/resource-library/sap-best-practices/
   HAActiveNode: nw-ha-vm-1
   HANodes: nw-ha-vm-1, nw-ha-vm-2

4. As SID_LCadm, check for errors in the configuration:

   > sapcontrol -nr INSTANCE_NUMBER -function HACheckConfig

   You should see output similar to the following example:

   20.05.2021 01:37:19
   HACheckConfig
   OK
   state, category, description, comment
   SUCCESS, SAP CONFIGURATION, Redundant ABAP instance configuration, 0 ABAP instances detected
   SUCCESS, SAP CONFIGURATION, Redundant Java instance configuration, 0 Java instances detected
   SUCCESS, SAP CONFIGURATION, Enqueue separation, All Enqueue server separated from application server
   SUCCESS, SAP CONFIGURATION, MessageServer separation, All MessageServer separated from application server
   SUCCESS, SAP STATE, SCS instance running, SCS instance status ok
   SUCCESS, SAP CONFIGURATION, SAPInstance RA sufficient version (vh-ascs-aha_AHA_00), SAPInstance includes is-ers patch
   SUCCESS, SAP CONFIGURATION, Enqueue replication (vh-ascs-aha_AHA_00), Enqueue replication enabled
   SUCCESS, SAP STATE, Enqueue replication state (vh-ascs-aha_AHA_00), Enqueue replication active

5. On the server where ASCS is active, as SID_LCadm, simulate a failover:

   > sapcontrol -nr ASCS_INSTANCE_NUMBER -function HAFailoverToNode ""

6. As root, if you follow the failover by using crm_mon, you should see ASCS move to the other server, ERS stop on that server, and then ERS move to the server that ASCS used to be running on.

Simulate a failover

Test your cluster by simulating a failure on the primary host. Use a test system or run the test on your production system before you release the system for use.

You can simulate a failure in a variety of ways, including:

• shutdown -r (on the active node)
• ip link set eth0 down
• echo c > /proc/sysrq-trigger

These instructions use ip link set eth0 down to take the network interface offline, because it validates both failover as well as fencing.

1. Backup your system.

2. As root on the host with the active SCS instance, take the network interface offline:

   # ip link set eth0 down

3. Reconnect to either host using SSH and change to the root user.

4. Enter crm status to confirm that the primary host is now active on the VM that used to contain the secondary host. Automatic restart is enabled in the cluster, so the stopped host will restart and assume the role of secondary host, as shown in the following example.

   Cluster Summary:
   * Stack: corosync
   * Current DC: nw-ha-vm-2 (version 2.0.4+20200616.2deceaa3a-3.3.1-2.0.4+20200616.2deceaa3a) - partition with quorum
   * Last updated: Fri May 21 22:31:32 2021
   * Last change:  Thu May 20 20:36:36 2021 by ahaadm via crm_resource on nw-ha-vm-1
   * 2 nodes configured
   * 10 resource instances configured
   
   Node List:
   * Online: [ nw-ha-vm-1 nw-ha-vm-2 ]
   
   Full List of Resources:
   * fencing-rsc-nw-aha-vm-1     (stonith:fence_gce):     Started nw-ha-vm-2
   * fencing-rsc-nw-aha-vm-2     (stonith:fence_gce):     Started nw-ha-vm-1
   * Resource Group: scs-aha-rsc-group-name:
     * filesystem-rsc-nw-aha-scs (ocf::heartbeat:Filesystem):     Started nw-ha-vm-2
     * health-check-rsc-nw-ha-scs        (ocf::heartbeat:anything):       Started nw-ha-vm-2
     * vip-rsc-nw-aha-scs        (ocf::heartbeat:IPaddr2):        Started nw-ha-vm-2
     * scs-aha-instance-rsc-name (ocf::heartbeat:SAPInstance):    Started nw-ha-vm-2
   * Resource Group: ers-aha-rsc-group-name:
     * filesystem-rsc-nw-aha-ers (ocf::heartbeat:Filesystem):     Started nw-ha-vm-1
     * health-check-rsc-nw-ha-ers        (ocf::heartbeat:anything):       Started nw-ha-vm-1
     * vip-rsc-nw-aha-ers        (ocf::heartbeat:IPaddr2):        Started nw-ha-vm-1
     * ers-aha-instance-rsc-name (ocf::heartbeat:SAPInstance):    Started nw-ha-vm-1

   If you're using a Simple Mount setup, then you see an output similar to the following:

   Cluster Summary:
    * Stack: corosync
    * Current DC: nw-ha-vm-2 (version 2.0.4+20200616.2deceaa3a-3.3.1-2.0.4+20200616.2deceaa3a) - partition with quorum
    * Last updated: Wed Sep 26 19:10:10 2024
    * Last change:  Tue Sep 25 23:48:35 2024 by ahaadm via crm_resource on nw-ha-vm-1
    * 2 nodes configured
    * 10 resource instances configured
   
   Node List:
    * Online: [ nw-ha-vm-1 nw-ha-vm-2 ]
   
   Full List of Resources:
    * fencing-rsc-nw-aha-vm-1     (stonith:fence_gce):     Started nw-ha-vm-2
    * fencing-rsc-nw-aha-vm-2     (stonith:fence_gce):     Started nw-ha-vm-1
    * Resource Group: scs-aha-rsc-group-name:
      * SAPStartSrv-rsc-nw-aha-scs (ocf::heartbeat:SAPStartSrv):     Started nw-ha-vm-2
      * health-check-rsc-nw-ha-scs        (ocf::heartbeat:anything):       Started nw-ha-vm-2
      * vip-rsc-nw-aha-scs        (ocf::heartbeat:IPaddr2):        Started nw-ha-vm-2
      * scs-aha-instance-rsc-name (ocf::heartbeat:SAPInstance):    Started nw-ha-vm-2
    * Resource Group: ers-aha-rsc-group-name:
      * SAPStartSrv-rsc-nw-aha-ers (ocf::heartbeat:SAPStartSrv):     Started nw-ha-vm-1
      * health-check-rsc-nw-ha-ers        (ocf::heartbeat:anything):       Started nw-ha-vm-1
      * vip-rsc-nw-aha-ers        (ocf::heartbeat:IPaddr2):        Started nw-ha-vm-1
      * ers-aha-instance-rsc-name (ocf::heartbeat:SAPInstance):    Started nw-ha-vm-1
   

Confirm lock entries are retained

To confirm lock entries are preserved across a failover, first select the tab for your version of the Enqueue Server and the follow the procedure to generate lock entries, simulate a failover, and confirm that the lock entries are retained after ASCS is activated again.

ENSA1

1. As SID_LCadm, on the server where ERS is active, generate lock entries by using the enqt program:

   > enqt pf=/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME 11 NUMBER_OF_LOCKS

2. As SID_LCadm, on the server where ASCS is active, verify that the lock entries are registered:

   > sapcontrol -nr ASCS_INSTANCE_NUMBER -function EnqGetStatistic | grep locks_now

   If you created 10 locks, you should see output similar to the following example:

   locks_now: 10

3. As SID_LCadm, on the server where ERS is active, start the monitoring function, OpCode=20, of the enqt program:

   > enqt pf=/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME 20 1 1 9999

   For example:

   > enqt pf=/sapmnt/AHA/profile/AHA_ERS10_vh-ers-aha 20 1 1 9999

4. Where ASCS is active, reboot the server.

   On the monitoring server, by the time Pacemaker stops ERS to move it to the other server, you should see output similar to the following.

   Number of selected entries: 10
   Number of selected entries: 10
   Number of selected entries: 10
   Number of selected entries: 10
   Number of selected entries: 10

5. When the enqt monitor stops, exit the monitor by entering Ctrl + c.

6. Optionally, as root on either server, monitor the cluster failover:

   # crm_mon

7. As SID_LCadm, after you confirm the locks were retained, release the locks:

   > enqt pf=/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME 12 NUMBER_OF_LOCKS

8. As SID_LCadm, on the server where ASCS is active, verify that the lock entries are removed:

   > sapcontrol -nr ASCS_INSTANCE_NUMBER -function EnqGetStatistic | grep locks_now

ENSA2

1. As SID_LCadm, on the server where ASCS is active, generate lock entries by using the enq_adm program:

   > enq_admin --set_locks=NUMBER_OF_LOCKS:X:DIAG::TAB:%u pf=/PATH_TO_PROFILE/SID_ASCSASCS_INSTANCE_NUMBER_ASCS_VIRTUAL_HOST_NAME

2. As SID_LCadm, on the server where ASCS is active, verify that the lock entries are registered:

   > sapcontrol -nr ASCS_INSTANCE_NUMBER -function EnqGetStatistic | grep locks_now

   If you created 10 locks, you should see output similar to the following example:

   locks_now: 10

3. Where ERS is active, confirm that the lock entries were replicated:

   > sapcontrol -nr ERS_INSTANCE_NUMBER -function EnqGetStatistic | grep locks_now

   The number of returned locks should be the same as on the ASCS instance.

4. Where ASCS is active, reboot the server.

5. Optionally, as root on either server, monitor the cluster failover:

   # crm_mon

6. As SID_LCadm, on the server where ASCS was restarted, verify that the lock entries were retained:

   > sapcontrol -nr ASCS_INSTANCE_NUMBER -function EnqGetStatistic | grep locks_now

7. As SID_LCadm, on the server where ERS is active, after you confirm the locks were retained, release the locks:

   > enq_admin --release_locks=NUMBER_OF_LOCKS:X:DIAG::TAB:%u pf=/PATH_TO_PROFILE/SID_ERSERS_INSTANCE_NUMBER_ERS_VIRTUAL_HOST_NAME

8. As SID_LCadm, on the server where ASCS is active, verify that the lock entries are removed:

   > sapcontrol -nr ASCS_INSTANCE_NUMBER -function EnqGetStatistic | grep locks_now

   You should see output similar to the following example:

   locks_now: 0

Simulate a Compute Engine maintenance event

Simulate a Compute Engine maintenance event to make sure that live migration does not trigger a failover.

The timeout and interval values that are used in these instructions account for the duration of live migrations. If you use shorter values in your cluster configuration, the risk that live migration might trigger a failover is greater.

To test the tolerance of your cluster for live migration:

1. On the primary node, trigger a simulated maintenance event by using following gcloud CLI command:

   # gcloud compute instances simulate-maintenance-event PRIMARY_VM_NAME

2. Confirm that the primary node does not change:

   # crm status

Evaluate your SAP NetWeaver workload

To automate continuous validation checks for your SAP NetWeaver high-availability workloads running on Google Cloud, you can use Workload Manager.

Workload Manager allows you to automatically scan and evaluate your SAP NetWeaver high-availability workloads against best practices from SAP, Google Cloud, and OS vendors. This helps improve the quality, performance, and reliability of your workloads.

For information about the best practices that Workload Manager supports for evaluating SAP NetWeaver high-availability workloads running on Google Cloud, see Workload Manager best practices for SAP. For information about creating and running an evaluation using Workload Manager, see Create and run an evaluation.

Troubleshooting

To troubleshoot problems with high-availability configurations for SAP NetWeaver, see Troubleshooting high-availability configurations for SAP.

Collect diagnostic information for SAP NetWeaver high-availability clusters

If you need help resolving a problem with high-availability clusters for SAP NetWeaver, gather the required diagnostic information and contact Cloud Customer Care.

To collect diagnostic information, see High-availability clusters on SLES diagnostic information.

Support

For issues with Google Cloud infrastructure or services, contact Customer Care. You can find the contact information on the Support Overview page in the Google Cloud console. If Customer Care determines that a problem resides in your SAP systems, then you are referred to SAP Support.

For SAP product-related issues, log your support request with SAP support. SAP evaluates the support ticket and, if it appears to be a Google Cloud infrastructure issue, then SAP transfers that ticket to the appropriate Google Cloud component in its system: BC-OP-LNX-GOOGLE or BC-OP-NT-GOOGLE.

Support requirements

Before you can receive support for SAP systems and the Google Cloud infrastructure and services that they use, you must meet the minimum support plan requirements.

For more information about the minimum support requirements for SAP on Google Cloud, see:

• Getting support for SAP on Google Cloud
• SAP Note 2456406 - SAP on Google Cloud Platform: Support Prerequisites (An SAP user account is required)

Performing post-deployment tasks

Before using your SAP NetWeaver system, we recommend that you backup your new SAP NetWeaver HA system.

For more information, see SAP NetWeaver operations guide.

What's next

For more information high-availability, SAP NetWeaver, and Google Cloud, see the following resources:

• SUSE Best Practices

• High-availability planning guide for SAP NetWeaver on Google Cloud

• For more information about VM administration and monitoring, see the SAP NetWeaver Operations Guide