Configuring options to run your container

---

Before you begin

• If you aren't familiar with containers, read Containers on Compute Engine.
• If you aren't familiar with Docker, read the Docker documentation.
• Read about Deploying containers on Compute Engine.
• If you haven't already, then set up authentication. Authentication is the process by which your identity is verified for access to Google Cloud services and APIs. To run code or samples from a local development environment, you can authenticate to Compute Engine by selecting one of the following options:
  

  Select the tab for how you plan to use the samples on this page:

  Console

  When you use the Google Cloud console to access Google Cloud services and APIs, you don't need to set up authentication.

  gcloud

  1. Install the Google Cloud CLI, then initialize it by running the following command:

     gcloud init

     Note: If you installed the gcloud CLI previously, make sure you have the latest version by running gcloud components update.
  2. Set a default region and zone.

When you create an instance or an instance template to use for Deploying containers on VMs and MIGs, specify the container configuration using the Google Cloud console or the Google Cloud CLI.

The following sections describe how to configure options for VM instances, but you can configure the following options when creating an instance template as well. Use the Google Cloud console or the Google Cloud CLI to configure options for VM instances in an instance template.

Console

1. Go to the Create an instance template page.

   Go to Create an instance template.

2. In the Container section, select the Deploy a container image to this VM instance checkbox and expand Advanced container options.

gcloud

1. In the Google Cloud CLI, use the gcloud compute instance-templates create-with-container command as shown in the following examples.

Specifying a restart policy

You can set a restart policy to specify whether to restart a container on exit. The default policy is to always restart. You can also set the policy to restart on failure or to never restart.

Note: This is similar to the --restart flag of the docker run command. Repeated attempts to restart a container are driven by the default Docker behavior, as specified in the Docker --restart reference.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. In the Restart policy section, select the restart policy for the container.
   3. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the --container-restart-policy flag to specify container a restart policy:

• always (default)
• on-failure
• never

The following example launches a container with on-failure restart policy, which means the restart only happens when the container exit code is nonzero:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-restart-policy on-failure

Use the gcloud compute instances update-container command with the --container-restart-policy flag for the restart policy on a container running on a VM.

Running a container in privileged mode

You can run a container in privileged mode to allow access to all devices on the host. Containers are run as "unprivileged" by default and aren't allowed to access any devices.

Note: This is equivalent of using the --privileged flag of the docker run command. Learn about container runtime privilege.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. Select Run as privileged.
   3. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the --container-privileged flag to run a container with runtime privilege. The following example launches a busybox container in privileged mode:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-privileged

Use the gcloud compute instances update-container command with the --container-privileged flag to update a container on a VM. Use the --no-container-privileged flag to turn off privileged mode.

Allocating a buffer for STDIN in the container runtime

You can allocate a buffer for STDIN in the container runtime to keep the STDIN stream open in a container. If this is not set, reads from STDIN in the container always result in EOF.

Along with allocating a pseudo-TTY, keeping the STDIN stream open is necessary for establishing an interactive shell in the container and for the container to receive its standard input from a pipe.

Note: This is equivalent of the --interactive (-i) flag of the docker run command. Learn about the --interactive flag.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. Select Allocate a buffer for STDIN.
   3. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use --container-stdin flag to allocate a buffer for STDIN in the container runtime. The following example starts a container and keeps its STDIN open:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-stdin

Use gcloud compute instances update-container command with the --container-stdin flag to update a container on a VM. Use the --no-container-stdin flag to turn off allocation of a buffer for STDIN.

Allocating a pseudo-TTY

Allocating a pseudo-TTY for a container is necessary for establishing an interactive shell in the container (along with allocating a buffer for STDIN).

Note: This is equivalent of the --tty (-t) flag of the docker run command. Learn about the --tty flag.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. Select Allocate a pseudo-TTY.
   3. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the --container-tty flag to allocate a pseudo-TTY. The following example starts a container and allocates a pseudo-TTY:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-stdin \
  --container-tty

Use the gcloud compute instances update-container command with the --container-tty flag to update a container on a VM. Use the --no-container-tty flag to not allocate a pseudo-TTY.

Overriding the default command to execute on container startup

The ENTRYPOINT of a container image specifies what executable to run when the container starts and lets you run the container as if it were that binary.

You can override the ENTRYPOINT command of the container image.

Note: This is similar to the --entrypoint flag (command only, no arguments) of the docker run command. Learn about ENTRYPOINT and the --entrypoint flag.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. In the Command field, enter a single executable command without parameters—for example, uptime.
   3. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the --container-command flag to override the container image ENTRYPOINT. The following example runs the uptime command in a busybox container to display the time since the last boot:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-command "uptime"

Use the gcloud compute instances update-container command with the --container-command flag to update a command for a container on a VM.

Use the --clear-container-command flag with the update-container command to clear the default command for the updated container.

Passing arguments to container ENTRYPOINT command

You can pass (append) arguments to the container ENTRYPOINT command or override the default container CMD command.

Note: This is similar to passing arguments to an entrypoint in the [ARG...] section of the docker run [OPTIONS] IMAGE [COMMAND] [ARG...] command. Learn about ENTRYPOINT and the --entrypoint flag.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. In the Arguments section, click Add argument.
   3. Enter one command argument for each box.
   4. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the --container-arg flag to pass arguments to a container image ENTRYPOINT command. Use a separate flag for each argument.

The following example runs the /bin/ash command with the -c 'ls -l' arguments in a container that has been set up to automatically run busybox:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-command "/bin/ash" \
  --container-arg="-c" \
  --container-arg="ls -l"

Note: Make sure to use the equals sign (=) with the --container-arg flag to ensure proper argument parsing. For example: --container-arg=ARG.

Use the gcloud compute instances update-container command with the --container-arg flags to update command arguments for a container running on a VM. The update replaces the entire argument list with the new list.

Use the --clear-container-args flag with the update-container command to remove all arguments from container declaration.

Configuring log driver options

If you need to configure log driver options, you can create a VM startup script to update your Docker configuration file with the logging options that you need. These options apply to all containers that run on the VM and that do not specify log driver options.

For example, the following startup script sets several options–including an option to limit the container's log size–then restarts Docker on the VM:

cat <<EOF > /etc/docker/daemon.json
{
  "live-restore": true,
  "storage-driver": "overlay2",
  "log-opts": {
    "max-size": "10m"
  }
}
EOF
systemctl restart docker

Setting environment variables

You can set environment variables in a container. Only the last value of KEY is taken when the KEY is repeated more than once.

Note: This is equivalent of the --env flag of the docker run command. Learn how Docker engine enables setting environment variables.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. In the Environment variables section, click Add variable.
   3. Add or remove environment variables as necessary, one for each line.
   4. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the --container-env flag to set environment variables in a container. The following example sets three environment variables: HOME, MODE, and OWNER:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-env HOME=/home,MODE=test,OWNER=admin

Use the --container-env-file flag to set environment variables from a local file. The following example sets the two environment variables from the env.txt file:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-env-file ./env.txt

The contents of the env.txt file are:

# this is a comment
HOME=/home
MODE=test
OWNER=admin

Use the gcloud compute instances update-container command with the --container-env or --container-env-file flag to update environment variables for a container on a VM. This updates any variables present in the VM instance's container declaration. Variables that are not in the container declaration are added.

Use the --remove-container-env flag to remove environment variables when updating a container on a VM. The following example removes the environment variables called MODE and OWNER:

gcloud compute instances update-container busybox-vm \
  --remove-container-env MODE,OWNER

If a specified environment variable does not exist, it is silently ignored.

Mounting a host directory as a data volume

You can mount a directory from a host VM into a container.

Note: This is equivalent to using the --volume flag and the --mount flag with mount type=bind of the docker run command. Learn how the Docker engine mounts a host directory as a data volume.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. In the Volume mounts section, click Add volume.

   3. From the Volume type list, select Directory, and do the following:

      • In the Mount path field, specify a mount path in a container directory structure at which to mount a host directory.
      • In the Host path field, specify a host path to the host directory to mount.
      • In the Mode list, specify whether to mount the directory in read/write or read-only mode.

   4. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the --container-mount-host-path flag to mount a host VM directory into a container. The following example mounts the host directory /tmp into the container at /logs in read/write mode:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-mount-host-path mount-path=/logs,host-path=/tmp,mode=rw

Specify mode=ro to mount a host directory in read-only mode.

Use the gcloud compute instances update-container command with the --container-mount-host-path flag to update host directory mounts on a container. Use the --remove-container-mounts flag to remove volume mounts with the specified mount paths. The following example removes a host path mount with mount-path=/logs:

gcloud compute instances update-container busybox-vm \
  --remove-container-mounts /logs

If the specified mount path does not exist, it is silently ignored.

Mounting tmpfs file system as a data volume

You can mount an empty tmpfs file system into a container.

Note: This is similar to a Google Kubernetes Engine EmptyDir volume with medium:Memory. Unlike Docker, where tmpfs data is deleted on container restarts, with tmpfs on a Compute Engine container, the volume and its data persist across container restarts and are deleted only on VM restart.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. In the Volume mounts section, click Add volume.
   3. From the Volume type list, select TmpFS.
   4. In the Mount path field, specify a mount path in a container directory structure where you would like to mount a TmpFS volume.
   5. In the Mode list, specify whether to mount the TmpFS volume in read/write or read-only mode.
   6. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the --container-mount-tmpfs flag to mount an empty tmpfs file system into a container. The following example mounts a tmpfs file system into the container at /cache in read/write mode:

gcloud compute instances create-with-container busybox-vm \
  --container-image docker.io/busybox:1.27 \
  --container-mount-tmpfs mount-path=/cache
 

Use the gcloud compute instances update-container command with the --container-mount-tmpfs flag to update tmpfs mounts on a container. Use the --remove-container-mountsflag to remove a tmpfs mount with the specified mount path when updating. The following example removes the tmpfs mount with mount-path=/cache:

gcloud compute instances update-container busybox-vm \
  --remove-container-mounts /cache

If the specified mount path does not exist, it is silently ignored.

Mounting a persistent disk as a data volume

With Container-Optimized OS 69 or later, you can mount persistent disks from a host VM into a container.

Note: This is similar to using the gcePersistentDisk volume type in Google Kubernetes Engine.

Prerequisites

• The disk must have an ext4 file system or have no file system. With no initial file system, the container startup agent formats the disk to ext4, and only read/write attachment and mounting are supported.
• The disk must be attached to the VM.

• Both partitionless devices and partitions are supported. For partition mounts, the disk cannot be blank; it must contain an existing partition table.

Console

1. Go to the Create an instance page.

   Go to Create an instance

2. In the Container section, click Deploy container.

3. On the Configure container page, do the following:

   1. Specify a container image name.
   2. In the Volume mounts section, click Add volume.
   3. From the Volume type list, select Disk.
   4. In the Mount path field, specify a path in the container directory structure where you would like to mount the persistent disk.
   5. From the Disk name list, select an existing disk to mount.
   6. In the Partition field, specify the partition number to mount if the disk has a partition table. If the disk does not have partitions, leave this field blank.
   7. In the Mode list, specify whether to mount the directory in read/write or read-only mode.
   8. To confirm the container details, click Select.

4. Continue with the VM creation process.

gcloud

Use the gcloud compute instances create-with-container command or the gcloud compute instances update-container command with the --container-mount-disk flag to mount a persistent disk into a container.

The following example mounts two disks, my-data-disk and my-scratch-disk, into the container at /disks/data-disk and /disks/scratch-disk mount paths.

gcloud compute instances create-with-container busybox-vm \
  --disk name=my-data-disk \
  --create-disk name=my-scratch-disk,auto-delete=yes,image=ubuntu-1710-artful-v20180315,image-project=ubuntu-os-cloud \
  --container-image docker.io/busybox:1.27 \
  --container-mount-disk mount-path="/disks/data-disk",name=my-data-disk,mode=ro \
  --container-mount-disk mount-path="/disks/scratch-disk",name=my-scratch-disk

Note that the --disk flag attaches my-data-disk, the --create-disk flag creates and attaches my-scatch-disk, and the --container-mount-disk flag mounts the attached disks to the container. Because a mode is not specified for my-scratch-disk, that disk is mounted to the container in read/write mode by default.

Use the gcloud compute instances update-container command with the --container-mount-disk flag to mount additional attached disks or to modify existing disk mounts.

Use the --remove-container-mounts flag to remove a disk volume mount with the specified mount path. The following example changes the mount mode of my-data-disk to read/write and removes the disk mount with mount-path="/disks/scratch-disk".

gcloud compute instances update-container busybox-vm \
  --container-mount-disk mount-path="/disks/data-disk",name=my-data-disk,mode=rw \
  --remove-container-mounts "/disks/scratch-disk"

If the mount path that you pass to the --remove-container-mounts flag does not exist, it is silently ignored.

Publishing container ports

VMs with containers use the host network mode, where a container shares the host's network stack and all interfaces from the host are available to the container.

Note: This is equivalent of passing the --network="host" flag when using the docker run command. Learn more about container network settings and host mode.

Container ports have a one-to-one mapping to the host VM ports. For example, a container port 80 maps to the host VM port 80. Compute Engine does not support the port publishing (-p) flag, and you do not have to specify it for the mapping to work.

To publish a container's ports, configure firewall rules to enable access to the host VM instance's ports. The corresponding ports of the container are accessible automatically, according to the firewall rules.

Example: Publishing port 80 for an NGINX container

The following example shows how to create a VM instance with an NGINX container and allow traffic to the container's port 80.

1. Create a VM instance with an NGINX container:

   gcloud compute instances create-with-container nginx-vm \
    --container-image gcr.io/cloud-marketplace/google/nginx1:1.15 \
    --tags http-server
   

   The container shares the host VM's network stack, and the container's port 80 is published to the host VM's port 80. The http-server tag is used as a target tag for the firewall rule, created in the next step.

2. Create a firewall rule to enable connections to port 80 of the VM instance. The following firewall rule allows HTTP connections to VM instances with the http-server tag.

   gcloud compute firewall-rules create allow-http \
    --allow tcp:80 --target-tags http-server
   

   The container automatically starts receiving traffic on port 80. You do not need to perform any additional configuration.

   You can create firewall rules for host VM protocol:port combinations where the protocol is tcp or udp. These rules effectively govern access from outside the VM to the corresponding container ports.

What's next

• Learn how to deploy Docker containers on Compute Engine.
• Learn about Container-optimized OS.