Cluster upgrades

This page discusses how automatic and manual upgrades work on Google Kubernetes Engine (GKE) clusters, including links to more information about related tasks and settings. You can use this information to keep your clusters updated for stability and security with minimal disruptions to your workloads.

How cluster and node pool upgrades work

This section discusses what happens in your cluster during automatic or manual upgrades. For auto-upgrades, Google initiates the auto-upgrade. Google observes automatic and manual upgrades across all GKE clusters, and intervenes if problems are observed.

A cluster is upgraded before its nodes.

Cluster upgrades

This section discusses what to expect when Google auto-upgrades your cluster or you initiate a manual upgrade.

  • zonal clusters have only a single control plane. During the upgrade, your workloads continue to run, but you cannot deploy new workloads, modify existing workloads, or make other changes to the cluster's configuration until the upgrade is complete.

  • Regional clusters have multiple replicas of the control plane, and only one replica is upgraded at a time, in an undefined order. During the upgrade, the cluster remains highly available, and each control plane replica is unavailable only while it is being upgraded.

If you configure a maintenance window or exclusion, it is honored if possible.

Node pool upgrades

Your cluster and its node pools do not necessarily run the same version of GKE. This section discusses what to expect when Google auto-upgrades your node pool or you initiate a manual node-pool upgrade.

Node pools are upgraded one at a time. Within a node pool, nodes are upgraded one at a time, in an undefined order. You can change the number of nodes upgraded at a time.

This process might take several hours depending on the number of nodes and their workload configurations. Configurations that can slow the rate of node upgrades include:

If you configure a maintenance window or exclusion, it is honored if possible.

When a node is upgraded, the following things happen:

  1. If Surge upgrades are enabled, GKE creates a new surge node with the upgraded version and waits for it to be registered with the control plane.
  2. GKE selects an existing node (which we will call the target node) to upgrade. It cordons and starts draining the target node. At this point, GKE can't schedule new Pods on the target node.
  3. Pods on the target node are rescheduled onto other nodes. If a Pod can't be rescheduled, that Pod stays PENDING until it can be rescheduled.
  4. If a surge node was created in step 1, the target node is deleted. If a surge node wasn't created, GKE upgrades the target node then it waits for the node to be registered.
  5. If a significant number of node auto-upgrades to a given version result in unhealthy nodes across the GKE fleet, upgrades to that version are halted while the problem is investigated.

Upgrading automatically

When you create a cluster using the Google Cloud Console, auto-upgrade is enabled on the cluster and its node pools by default, and Google upgrades your clusters when a new GKE version is selected for auto-upgrade.

When you create a cluster using the gcloud command or the GKE API, node auto-upgrade is currently enabled by default. To disable it manually, see Auto-upgrading nodes.

For more control over when an auto-upgrade can occur (or must not occur), you can configure maintenance windows and exclusions.

A cluster's node pools can be no more than two minor versions behind the control plane version, to maintain compatibility with the cluster API. The node pool version also determines the versions of software packages installed on each node. It is recommended to keep node pools updated to the cluster version.

If you enroll your cluster in a release channel, nodes always run the same version of GKE as the cluster itself, except during a brief period between completing the cluster's control plane upgrade and beginning to upgrade a given node pool.

How versions are selected for auto-upgrade

New GKE versions are released regularly, but a version is not selected for auto-upgrade right away. When a GKE version has accumulated enough cluster usage to prove stability over time, Google selects it as an auto-upgrade target for clusters running a subset of older versions.

New auto-upgrade targets are announced in the release notes. Until an available version is selected for auto-upgrade, you can upgrade to it manually. Occasionally, a version is selected for cluster auto-upgrade and node auto-upgrade during different weeks.

Soon after a new minor version becomes generally available, the oldest available minor version typically becomes unsupported. Clusters running minor versions that become unsupported are automatically upgraded to the next minor version.

Within a minor version (such as v1.14.x), clusters can be automatically upgraded to a new patch release.

Release channels allow you to control your cluster and node pool version based on a version's stability rather than managing the version directly.

Configuring when auto-upgrades can occur

By default, auto-upgrades can occur at any time. Auto-upgrades are minimally disruptive, especially for regional clusters. However, some workloads may require finer-grained control. You can configure maintenance windows and exclusions to manage when auto-upgrades can and must not occur.

Upgrading manually

You can request to manually upgrade your cluster or its node pools to an available and compatible version at any time. Manual upgrades bypass any configured maintenance windows and maintenance exclusions.

When you manually upgrade a cluster, its availability depends on whether the cluster is regional or not:

  • For zonal clusters, the control plane is unavailable while it is being upgraded. For the most part, workloads run normally but cannot be modified during the upgrade.

  • For regional clusters, one replica of the control plane is unavailable at a time while it is upgraded, but the cluster remains highly available during the upgrade.

You can manually initiate a node upgrade to a version compatible with the control plane.

Surge upgrades

Surge upgrades let you control the number of nodes GKE can upgrade at a time and control how disruptive upgrades are to your workloads.

Changing upgrade settings to balance speed and disruption

You can change how many nodes GKE attempts to upgrade at once by changing the surge upgrade parameters on a node pool. Surge upgrades reduce disruption to your workloads during cluster maintenance and also allow you to control the number of nodes upgraded in parallel. Surge upgrades also work with the Cluster Autoscaler to prevent changes to nodes that are being upgraded.

Surge upgrade behavior is determined by two settings:

max-surge-upgrade

The number of additional nodes that can be added to the node pool during an upgrade. Increasing max-surge-upgrade raises the number of nodes that can be upgraded simultaneously. Default is 1. Can be set to 0 or greater.

max-unavailable-upgrade

The number of nodes that can be simultaneously unavailable during an upgrade. Default is 0. Increasing max-unavailable-upgrade raises the number of nodes that can be upgraded in parallel.

The number of nodes upgraded simultaneously is the sum of max-surge-upgrade and max-unavailable-upgrade. The maximum number of nodes upgraded simultaneously is limited to 20.

For example, a 5-node pool is created with max-surge-upgrade set to 2 and max-unavailable-upgrade set to 1. During a node pool upgrade, GKE creates two upgraded nodes. GKE brings down at most three (the sum of max-surge-upgrade and max-unavailable-upgrade) existing nodes after the upgraded nodes are ready. GKE will only make a maximum of one node unavailable (max-unavailable-upgrade) at a time. During the upgrade process, the node pool will include between four and seven nodes.

You can configure surge upgrade parameters for node pools that use auto-upgrades and manual upgrades. You can learn more and try out Surge Upgrade by completing the tutorial "Use surge upgrades to decrease disruptions from GKE node upgrades".

Determining your optimal surge configuration

The following table describes three different upgrade settings as a demonstration to help you understand different configurations:

Description Configuration
Balanced (Default), slower but least disruptive maxSurge=1 maxUnavailable=0
Fast, no surge resources, most disruptive maxSurge=0 maxUnavailable=20
Fast, most surge resources and less disruptive maxSurge=20 maxUnavailable=0

Balanced (Default)

The simplest way to take advantage of surge upgrade is to configure maxSurge=1 maxUnavailable=0. This means that only 1 surge node can be added to the node pool during an upgrade so only 1 node will be upgraded at a time. This setting is superior to the existing upgrade configuration (maxSurge=0 maxUnavailable=1) because it speeds up Pod restarts during upgrades while progressing conservatively.

Fast and no surge resources

If your workload isn't sensitive to disruption, like most batch jobs, you can emphasize speed by using maxSurge=0 maxUnavailable=20. This configuration does not bring up additional surge nodes and allows 20 nodes to be upgraded at the same time.

Fast and less disruptive

If your workload is sensitive to disruption and you have already set up PodDisruptionBudgets (PDB) and you are not using externalTrafficPolicy: Local, which does not work with parallel node drains, you can increase the speed of the upgrade by using maxSurge=20 maxUnavailable=0. This configuration upgrades 20 nodes in parallel while the PDB limits the number of Pods that can be drained at a given time. Although the configurations of PDBs may vary, if you create a PDB with maxUnavailable: 1 for one or more workloads running on the node pool, then only one Pod of those workloads can be evicted at a time, limiting the parallelism of the entire upgrade.

Relationship with quota

While recreating nodes does not require additional Compute Engine resources, surge upgrading nodes does. Resource allocation is subjected to Compute Engine quota. Depending on your configuration, this quota can limit the number of parallel upgrades or even cause the upgrade to fail.

For more information about quota, go to Node upgrades and quota

Receiving upgrade notifications

GKE publishes upgrade notifications to Pub/Sub, providing you with a channel to receive information from GKE about your clusters.

For more information, see Receiving cluster upgrade notifications.

What's next