Versehentliches Löschen einer VM verhindern

In diesem Dokument wird beschrieben, wie Sie bestimmte VM-Instanzen vor dem Löschen schützen. Legen Sie dazu das Attribut deletionProtection für eine Instanzressource fest. Weitere Informationen zu VM-Instanzen finden Sie in der Dokumentation zu Instanzen.

Ihre Arbeitslast kann bestimmte VM-Instanzen enthalten, die für die Ausführung Ihrer Anwendung oder Dienste wichtig sind, z. B. eine Instanz, auf der ein SQL-Server ausgeführt wird, ein Server, der als Lizenzmanager verwendet wird, und so weiter. Diese VM-Instanzen müssen möglicherweise unbegrenzt laufen. Sie müssen also in der Lage sein, zu verhindern, dass diese VMs gelöscht werden.

Mit dem Flag deletionProtection kann eine VM-Instanz vor versehentlichem Löschen geschützt werden. Wenn ein Nutzer versucht, eine VM-Instanz zu löschen, für die Sie das Flag deletionProtection gesetzt haben, schlägt die Anforderung fehl. Nur ein Nutzer, dem eine Rolle mit der Berechtigung compute.instances.create erteilt wurde, kann das Flag zurücksetzen, damit die Ressource gelöscht werden kann.

Hinweise

Lesen Sie die Dokumentation zu Instanzen.
Richten Sie die Authentifizierung ein, falls Sie dies noch nicht getan haben. Bei der Authentifizierung wird Ihre Identität für den Zugriff auf Google Cloud-Dienste und APIs überprüft. Zur Ausführung von Code oder Beispielen aus einer lokalen Entwicklungsumgebung können Sie sich so bei Compute Engine authentifizieren.

Select the tab for how you plan to use the samples on this page:
Console

When you use the Google Cloud console to access Google Cloud services and APIs, you don't need to set up authentication.
gcloud
1. Install the Google Cloud CLI, then initialize it by running the following command:
  gcloud init
  Note: If you installed the gcloud CLI previously, make sure you have the latest version by running gcloud components update.
2. Set a default region and zone.

Spezifikationen

Durch den Löschschutz werden die folgenden Aktionen nicht verhindert:
- Instanz innerhalb der VM beenden (z. B. durch Ausführen des Befehls shutdown)
- Instanz beenden
- Instanz zurücksetzen
- Instanz anhalten
- Instanzentfernung durch Google aufgrund von Betrug und Missbrauch
- Instanzen werden aufgrund eines Projektabschlusses entfernt
Der Löschschutz kann sowohl auf normale VMs als auch auf präemptive VMs angewendet werden.
Der Löschschutz kann nicht auf VMs angewendet werden, die Teil einer verwalteten Instanzgruppe sind, kann aber auf Instanzen angewendet werden, die Teil von nicht verwalteten Instanzgruppen sind.
Der Löschschutz kann nicht in Instanzvorlagen festgelegt werden.

Berechtigungen

Zum Ausführen dieser Aufgabe benötigen Sie die folgenden Berechtigungen ODER eine der folgenden IAM-Rollen für die Ressource.

Berechtigungen

compute.instances.create

Rollen

compute.admin
compute.instanceAdmin.v1

Löschschutz während der Instanzerstellung festlegen

Standardmäßig ist der Löschschutz für Ihre Instanz deaktiviert. Aktivieren Sie den Löschschutz mithilfe der folgenden Anweisungen.

Console

Rufen Sie in der Google Cloud Console die Seite Instanz erstellen auf.

Zur Seite „Instanz erstellen“
Maximieren Sie den Abschnitt Erweiterte Optionen und tun Sie Folgendes:
1. Maximieren Sie den Bereich Verwaltung.
2. Klicken Sie das Kästchen Löschschutz aktivieren an.
Fahren Sie mit dem VM-Erstellungsprozess fort.

gcloud

Verwenden Sie beim Erstellen einer VM-Instanz entweder das Flag --deletion-protection oder das Flag no-deletion-protection. Der Löschschutz ist standardmäßig deaktiviert. Aktivieren Sie den Löschschutz wie im Folgenden beschrieben:

gcloud compute instances create [INSTANCE_NAME] --deletion-protection

Dabei steht [INSTANCE_NAME] für den Namen der gewünschten Instanz.

So deaktivieren Sie den Löschschutz während der Erstellung:

gcloud compute instances create [INSTANCE_NAME] --no-deletion-protection

Go

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// createInstance sends an instance creation request to the Compute Engine API
// and waits for it to complete.
func createInstance(w io.Writer, projectID, zone, instanceName string, deleteProtection bool) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// deleteProtection := true

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	req := &computepb.InsertInstanceRequest{
		Project: projectID,
		Zone:    zone,
		InstanceResource: &computepb.Instance{
			Name: proto.String(instanceName),
			// Set the delete protection bit.
			DeletionProtection: proto.Bool(deleteProtection),
			Disks: []*computepb.AttachedDisk{
				{
					// Describe the size and source image of the boot disk to attach to the instance.
					InitializeParams: &computepb.AttachedDiskInitializeParams{
						DiskSizeGb:  proto.Int64(10),
						SourceImage: proto.String("projects/debian-cloud/global/images/family/debian-12"),
					},
					AutoDelete: proto.Bool(true),
					Boot:       proto.Bool(true),
					Type:       proto.String(computepb.AttachedDisk_PERSISTENT.String()),
				},
			},
			MachineType: proto.String(fmt.Sprintf("zones/%s/machineTypes/e2-small", zone)),
			NetworkInterfaces: []*computepb.NetworkInterface{
				{
					// Use the default VPC network.
					Name: proto.String("default"),
				},
			},
		},
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java


import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.AttachedDiskInitializeParams;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateInstanceDeleteProtection {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample.
    // project: project ID or project number of the Cloud project you want to use.
    // zone: name of the zone you want to use. For example: “us-west3-b”
    // instanceName: name of the new virtual machine.
    // deleteProtection: boolean value indicating if the new virtual machine should be
    // protected against deletion or not.
    String projectId = "your-project-id-or-number";
    String zone = "zone-name";
    String instanceName = "instance-name";
    boolean deleteProtection = true;
    createInstanceDeleteProtection(projectId, zone, instanceName, deleteProtection);
  }

  // Send an instance creation request to the Compute Engine API and wait for it to complete.
  public static void createInstanceDeleteProtection(String projectId, String zone,
      String instanceName, boolean deleteProtection)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {

    String machineType = String.format("zones/%s/machineTypes/e2-small", zone);
    String sourceImage = String
        .format("projects/debian-cloud/global/images/family/%s", "debian-11");
    long diskSizeGb = 10L;
    String networkName = "default";

    // Instance creation requires at least one persistent disk and one network interface.
    try (InstancesClient instancesClient = InstancesClient.create()) {

      AttachedDisk disk =
          AttachedDisk.newBuilder()
              .setBoot(true)
              .setAutoDelete(true)
              .setType(AttachedDisk.Type.PERSISTENT.toString())
              .setInitializeParams(
                  // Describe the size and source image of the boot disk to attach to the instance.
                  AttachedDiskInitializeParams.newBuilder()
                      .setSourceImage(sourceImage)
                      .setDiskSizeGb(diskSizeGb)
                      .build())
              .build();

      // Use the default VPC network.
      NetworkInterface networkInterface = NetworkInterface.newBuilder()
          .setName(networkName)
          .build();

      // Collect information into the Instance object.
      Instance instanceResource =
          Instance.newBuilder()
              .setName(instanceName)
              .setMachineType(machineType)
              .addDisks(disk)
              .addNetworkInterfaces(networkInterface)
              // Set the "Delete protection" bit.
              .setDeletionProtection(deleteProtection)
              .build();

      System.out.printf("Creating instance: %s at %s %n", instanceName, zone);

      // Prepare the request to insert an instance.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(projectId)
          .setZone(zone)
          .setInstanceResource(instanceResource)
          .build();

      // Wait for the create operation to complete.
      Operation response = instancesClient.insertAsync(insertInstanceRequest)
          .get(3, TimeUnit.MINUTES);
      ;

      if (response.hasError()) {
        System.out.println("Instance creation failed ! ! " + response);
        return;
      }
      System.out.printf("Instance created : %s", instanceName);
      System.out.println("Operation Status: " + response.getStatus());
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const deleteProtection = true;

const compute = require('@google-cloud/compute');

// Send an instance creation request to the Compute Engine API and wait for it to complete.
async function createInstance() {
  const instancesClient = new compute.InstancesClient();

  const [response] = await instancesClient.insert({
    project: projectId,
    zone,
    instanceResource: {
      name: instanceName,
      // Set the delete protection bit.
      deletionProtection: deleteProtection,
      disks: [
        {
          // Describe the size and source image of the boot disk to attach to the instance.
          initializeParams: {
            diskSizeGb: '10',
            sourceImage:
              'projects/debian-cloud/global/images/family/debian-11',
          },
          autoDelete: true,
          boot: true,
          type: 'PERSISTENT',
        },
      ],
      machineType: `zones/${zone}/machineTypes/e2-small`,
      networkInterfaces: [
        {
          // Use the default VPC network.
          name: 'default',
        },
      ],
    },
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createInstance();

Python

from __future__ import annotations

import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def get_image_from_family(project: str, family: str) -> compute_v1.Image:
    """
    Retrieve the newest image that is part of a given family in a project.

    Args:
        project: project ID or project number of the Cloud project you want to get image from.
        family: name of the image family you want to get image from.

    Returns:
        An Image object.
    """
    image_client = compute_v1.ImagesClient()
    # List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details
    newest_image = image_client.get_from_family(project=project, family=family)
    return newest_image


def disk_from_image(
    disk_type: str,
    disk_size_gb: int,
    boot: bool,
    source_image: str,
    auto_delete: bool = True,
) -> compute_v1.AttachedDisk:
    """
    Create an AttachedDisk object to be used in VM instance creation. Uses an image as the
    source for the new disk.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        source_image: source image to use when creating this disk. You must have read access to this disk. This can be one
            of the publicly available images or an image from one of your projects.
            This value uses the following format: "projects/{project_name}/global/images/{image_name}"
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created using the specified image.
    """
    boot_disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.source_image = source_image
    initialize_params.disk_size_gb = disk_size_gb
    initialize_params.disk_type = disk_type
    boot_disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    boot_disk.auto_delete = auto_delete
    boot_disk.boot = boot
    return boot_disk


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)


def create_protected_instance(
    project_id: str, zone: str, instance_name: str
) -> compute_v1.Instance:
    """
    Create a new VM instance with Debian 10 operating system and delete protection
    turned on.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.

    Returns:
        Instance object.
    """
    newest_debian = get_image_from_family(project="debian-cloud", family="debian-11")
    disk_type = f"zones/{zone}/diskTypes/pd-standard"
    disks = [disk_from_image(disk_type, 10, True, newest_debian.self_link)]
    instance = create_instance(
        project_id, zone, instance_name, disks, delete_protection=True
    )
    return instance

REST

Fügen Sie in der API beim Erstellen einer VM-Instanz das Attribut deletionProtection in den Anfragetext ein. Beispiel:

POST https://compute.googleapis.com/compute/v1/projects/[PROJECT_ID]/zones/[ZONE]/instances

{
  "name": "[INSTANCE_NAME]",
  "deletionProtection": "true",
  ...
}

Um den Löschschutz zu deaktivieren, setzen Sie deletionProtection auf false.

Ermitteln, ob für eine Instanz Löschschutz aktiviert ist

Sie können mit dem gcloud tool oder der API feststellen, ob der Löschschutz für eine Instanz aktiviert ist.

Console

Gehen Sie zur Seite der VM-Instanzen.

Zu „VM-Instanzen“
Wenn Sie dazu aufgefordert werden, wählen Sie Ihr Projekt aus und klicken auf Weiter.
Öffnen Sie auf der Seite VM-Instanzen das Menü Spalten und aktivieren Sie den Löschschutz.
Eine neue Spalte wird mit dem Löschschutzsymbol angezeigt. Wenn auf einer VM der Löschschutz aktiviert ist, wird das Symbol neben dem Instanznamen angezeigt.

gcloud

Führen Sie in der gcloud CLI den instances describe-Befehl aus und suchen Sie nach dem Feld für den Löschschutz. Beispiel:

gcloud compute instances describe example-instance | grep "deletionProtection"

Das Tool gibt den Wert des Attributs deletionProtection zurück, das entweder auf true oder false festgelegt ist:

deletionProtection: false

Go

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
)

// getDeleteProtection prints the state of delete protection flag of given instance.
func getDeleteProtection(w io.Writer, projectID, zone, instanceName string) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	req := &computepb.GetInstanceRequest{
		Project:  projectID,
		Zone:     zone,
		Instance: instanceName,
	}

	instance, err := instancesClient.Get(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to get instance: %w", err)
	}

	fmt.Fprintf(w, "Instance %s has DeleteProtection value: %v", instanceName, instance.GetDeletionProtection())

	return nil
}

Java


import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import java.io.IOException;

public class GetDeleteProtection {

  public static void main(String[] args) throws IOException {
    // TODO(developer): Replace these variables before running the sample.
    // project: project ID or project number of the Cloud project you want to use.
    // zone: name of the zone you want to use. For example: “us-west3-b”
    // instanceName: name of the new virtual machine.
    String projectId = "your-project-id-or-number";
    String zone = "zone-name";
    String instanceName = "instance-name";
    getDeleteProtection(projectId, zone, instanceName);
  }

  // Returns the state of delete protection flag of given instance.
  public static boolean getDeleteProtection(String projectId, String zone,
      String instanceName) throws IOException {

    try (InstancesClient instancesClient = InstancesClient.create()) {
      Instance instance = instancesClient.get(projectId, zone, instanceName);
      boolean deleteProtection = instance.getDeletionProtection();
      System.out.printf("Retrieved Delete Protection setting for instance: %s : %s", instanceName,
          deleteProtection);

      return deleteProtection;
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';

const compute = require('@google-cloud/compute');

// Print the state of delete protection flag of given instance.
async function getDeleteProtection() {
  const instancesClient = new compute.InstancesClient();

  const [instance] = await instancesClient.get({
    project: projectId,
    zone,
    instance: instanceName,
  });

  console.log(
    `Instance ${instanceName} has deletionProtection value: ${instance.deletionProtection}`
  );
}

getDeleteProtection();

Python

from google.cloud import compute_v1


def get_delete_protection(project_id: str, zone: str, instance_name: str) -> bool:
    """
    Returns the state of delete protection flag of given instance.
    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone you want to use. For example: “us-west3-b”
        instance_name: name of the virtual machine to check.
    Returns:
        The boolean value of the delete protection setting.
    """
    instance_client = compute_v1.InstancesClient()
    instance = instance_client.get(
        project=project_id, zone=zone, instance=instance_name
    )
    return instance.deletion_protection

REST

Geben Sie in der API eine GET-Anfrage ein und suchen Sie nach dem Feld deletionProtection:

GET https://compute.googleapis.com/compute/v1/projects/[PROJECT_ID]/zones/[ZONE]/instances/[INSTANCE_NAME]

Löschschutz für vorhandene Instanzen umschalten

Sie können den Löschschutz für eine vorhandene Instanz unabhängig vom aktuellen Status der Instanz umschalten. Insbesondere müssen Sie die Instanz nicht stoppen, bevor Sie den Löschschutz aktivieren oder deaktivieren können.

Console

Gehen Sie zur Seite der VM-Instanzen.

Zu „VM-Instanzen“
Wenn Sie dazu aufgefordert werden, wählen Sie Ihr Projekt aus und klicken auf Weiter.
Klicken Sie auf den Namen der Instanz, für die Sie den Löschschutz aktivieren bzw. deaktivieren möchten. Die Seite mit den Instanzdetails wird angezeigt.
Führen Sie auf der Seite mit den Instanzdetails folgende Schritte aus:
1. Klicken Sie oben auf der Seite auf Bearbeiten.
2. Klicken Sie unter Löschschutz auf das Kästchen, um den Löschschutz zu aktivieren, oder entfernen Sie das Häkchen, um ihn zu deaktivieren.
3. Speichern Sie die Änderungen.

gcloud

Führen Sie mit der gcloud CLI den update-Befehl entweder mit dem Flag --deletion-protection oder --no-deletion-protection aus:

gcloud compute instances update [INSTANCE_NAME] \
    [--deletion-protection | --no-deletion-protection]

Geben Sie z. B. Folgendes ein, um den Löschschutz für eine Instanz namens example-vm zu deaktivieren:

gcloud compute instances update example-vm --deletion-protection

Go

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// setDeleteProtection updates the delete protection setting of given instance.
func setDeleteProtection(w io.Writer, projectID, zone, instanceName string, deleteProtection bool) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// deleteProtection := true

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	req := &computepb.SetDeletionProtectionInstanceRequest{
		Project:            projectID,
		Zone:               zone,
		Resource:           instanceName,
		DeletionProtection: proto.Bool(deleteProtection),
	}

	op, err := instancesClient.SetDeletionProtection(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to set deletion protection: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance updated\n")

	return nil
}

Java


import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.SetDeletionProtectionInstanceRequest;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class SetDeleteProtection {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample.
    // project: project ID or project number of the Cloud project you want to use.
    // zone: name of the zone you want to use. For example: “us-west3-b”
    // instanceName: name of the new virtual machine.
    // deleteProtection: boolean value indicating if the new virtual machine should be
    // protected against deletion or not.
    String projectId = "your-project-id-or-number";
    String zone = "zone-name";
    String instanceName = "instance-name";
    boolean deleteProtection = true;
    setDeleteProtection(projectId, zone, instanceName, deleteProtection);
  }

  // Updates the "Delete Protection" setting of given instance.
  public static void setDeleteProtection(String projectId, String zone,
      String instanceName, boolean deleteProtection)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {

    try (InstancesClient instancesClient = InstancesClient.create()) {

      SetDeletionProtectionInstanceRequest request =
          SetDeletionProtectionInstanceRequest.newBuilder()
              .setProject(projectId)
              .setZone(zone)
              .setResource(instanceName)
              .setDeletionProtection(deleteProtection)
              .build();

      instancesClient.setDeletionProtectionAsync(request).get(3, TimeUnit.MINUTES);
      ;
      // Retrieve the updated setting from the instance.
      System.out.printf("Updated Delete Protection setting: %s",
          instancesClient.get(projectId, zone, instanceName).getDeletionProtection());
    }
  }
}

Node.js

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const deleteProtection = True;

const compute = require('@google-cloud/compute');

// Update the delete protection setting of given instance.
async function setDeleteProtection() {
  const instancesClient = new compute.InstancesClient();

  const [response] = await instancesClient.setDeletionProtection({
    project: projectId,
    zone,
    // Set the delete protection bit.
    deletionProtection: deleteProtection,
    resource: instanceName,
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance updated.');
}

setDeleteProtection();

Python

from __future__ import annotations

import sys
from typing import Any

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def set_delete_protection(
    project_id: str, zone: str, instance_name: str, delete_protection: bool
) -> None:
    """
    Updates the delete protection setting of given instance.
    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone you want to use. For example: “us-west3-b”
        instance_name: name of the instance to update.
        delete_protection: boolean value indicating if the virtual machine should be
            protected against deletion or not.
    """
    instance_client = compute_v1.InstancesClient()

    request = compute_v1.SetDeletionProtectionInstanceRequest()
    request.project = project_id
    request.zone = zone
    request.resource = instance_name
    request.deletion_protection = delete_protection

    operation = instance_client.set_deletion_protection(request)
    wait_for_extended_operation(operation, "changing delete protection setting")

REST

Führen Sie in der API eine POST-Anfrage für die Methode setDeletionProtection mit dem Suchparameter deletionProtection aus. Beispiel:

POST https://compute.googleapis.com/compute/v1/projects/[PROJECT_ID]/zones/[ZONE]/instances/[INSTANCE_NAME]/setDeletionProtection?deletionProtection=true

Um den Löschschutz zu deaktivieren, setzen Sie deletionProtection auf false. Geben Sie bei der Anfrage keinen Anfragetext an.

Nächste Schritte

Instanz beenden
Instanzen löschen, die nicht mehr benötigt werden

Versehentliches Löschen einer VM verhindern

Hinweise

Console

gcloud

Go

Java

Node.js

PHP

Python

REST

Spezifikationen

Berechtigungen

Löschschutz während der Instanzerstellung festlegen

Console

gcloud

Go

Java

Node.js

Python

REST

Ermitteln, ob für eine Instanz Löschschutz aktiviert ist

Console

gcloud

Go

Java

Node.js

Python

REST

Löschschutz für vorhandene Instanzen umschalten

Console

gcloud

Go

Java

Node.js

Python

REST

Nächste Schritte