VM-Instanz erstellen und starten


In diesem Dokument wird beschrieben, wie Sie eine VM-Instanz mit einem Bootlaufwerk-Image, einem Bootlaufwerk-Snapshot oder einem Container-Image erstellen. Einige Images unterstützen Shielded VM-Funktionen, die Sicherheitsfeatures wie UEFI-konforme Firmware, Secure Boot und vTPM-geschütztes Measured Boot bieten. Auf Shielded VMs sind standardmäßig vTPM und das Integritätsmonitoring aktiviert.

Beim Erstellen der VM können Sie ein oder mehrere Laufwerke dafür erstellen. Es ist aber auch möglich, nach dem Erstellen weitere Laufwerke hinzuzufügen. Nach dem Erstellen einer VM-Instanz wird diese von Compute Engine automatisch gestartet.

Beim Erstellen einer VM können Sie auch mehrere Netzwerkschnittstellen hinzufügen. Um das Risiko von Bedrohungen im Internet zu minimieren, können Sie die externe IP-Adresse weglassen, wenn Sie der Instanz eine Netzwerkschnittstelle hinzufügen. In solchen Fällen kann nur von anderen VMs im selben VPC-Netzwerk oder in einem verknüpften Netzwerk auf die VM zugegriffen werden, sofern Sie nicht Cloud NAT konfigurieren.

Wenn Sie zum ersten Mal eine VM erstellen, lesen Sie die Informationen unter Kurzanleitung: Linux-VM verwenden oder Kurzanleitung: Windows Server-VM verwenden.

Informationen zu spezifischeren oder komplizierteren VM-Erstellungen finden Sie in den folgenden Ressourcen:

Wenn Sie eine vorhandene Lizenz verwenden, finden Sie weitere Informationen unter Eigene Lizenz verwenden (Bring your own License, BYOL).

Hinweise

  • Beim Erstellen von VMs aus Images oder Laufwerken mit dem Google Cloud CLI oder REST sind maximal 20 VM-Instanzen pro Sekunde zulässig. Wenn Sie eine höhere Anzahl von VMs pro Sekunde erstellen müssen, fordern Sie ein höheres Kontingentlimit für die Images-Ressource an.
  • Richten Sie die Authentifizierung ein, falls Sie dies noch nicht getan haben. Bei der Authentifizierung wird Ihre Identität für den Zugriff auf Google Cloud-Dienste und APIs überprüft. Zur Ausführung von Code oder Beispielen aus einer lokalen Entwicklungsumgebung können Sie sich so bei Compute Engine authentifizieren.

    Wählen Sie den Tab für die Verwendung der Beispiele auf dieser Seite aus:

    Console

    Wenn Sie über die Google Cloud Console auf Google Cloud-Dienste und -APIs zugreifen, müssen Sie die Authentifizierung nicht einrichten.

    gcloud

    1. Installieren Sie die Google Cloud CLI und initialisieren Sie sie mit folgendem Befehl:

      gcloud init
    2. Legen Sie eine Standardregion und -zone fest.

    Terraform

    Wenn Sie die Terraform-Beispiele auf dieser Seite aus einer lokalen Entwicklungsumgebung heraus verwenden möchten, installieren und initialisieren Sie die gcloud CLI und richten dann die Standardanmeldedaten für Anwendungen mit Ihren Nutzeranmeldedaten ein.

    1. Installieren Sie die Google Cloud CLI.
    2. Führen Sie folgenden Befehl aus, um die gcloud CLI zu initialisieren:

      gcloud init
    3. Erstellen Sie lokale Anmeldedaten zur Authentifizierung für Ihr Google-Konto:

      gcloud auth application-default login

    Weitere Informationen: Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

    C#

    Wenn Sie die .NET-Beispiele auf dieser Seite aus einer lokalen Entwicklungsumgebung heraus verwenden möchten, installieren und initialisieren Sie die gcloud CLI und richten dann die Standardanmeldedaten für Anwendungen mit Ihren Nutzeranmeldedaten ein.

    1. Installieren Sie die Google Cloud CLI.
    2. Führen Sie folgenden Befehl aus, um die gcloud CLI zu initialisieren:

      gcloud init
    3. Erstellen Sie lokale Anmeldedaten zur Authentifizierung für Ihr Google-Konto:

      gcloud auth application-default login

    Weitere Informationen: Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

    Einfach loslegen (Go)

    Wenn Sie die Go-Beispiele auf dieser Seite aus einer lokalen Entwicklungsumgebung heraus verwenden möchten, installieren und initialisieren Sie die gcloud CLI und richten dann die Standardanmeldedaten für Anwendungen mit Ihren Nutzeranmeldedaten ein.

    1. Installieren Sie die Google Cloud CLI.
    2. Führen Sie folgenden Befehl aus, um die gcloud CLI zu initialisieren:

      gcloud init
    3. Erstellen Sie lokale Anmeldedaten zur Authentifizierung für Ihr Google-Konto:

      gcloud auth application-default login

    Weitere Informationen: Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

    Java

    Wenn Sie die Java-Beispiele auf dieser Seite aus einer lokalen Entwicklungsumgebung heraus verwenden möchten, installieren und initialisieren Sie die gcloud CLI und richten dann die Standardanmeldedaten für Anwendungen mit Ihren Nutzeranmeldedaten ein.

    1. Installieren Sie die Google Cloud CLI.
    2. Führen Sie folgenden Befehl aus, um die gcloud CLI zu initialisieren:

      gcloud init
    3. Erstellen Sie lokale Anmeldedaten zur Authentifizierung für Ihr Google-Konto:

      gcloud auth application-default login

    Weitere Informationen: Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

    Node.js

    Wenn Sie die Node.js-Beispiele auf dieser Seite aus einer lokalen Entwicklungsumgebung heraus verwenden möchten, installieren und initialisieren Sie die gcloud CLI und richten dann die Standardanmeldedaten für Anwendungen mit Ihren Nutzeranmeldedaten ein.

    1. Installieren Sie die Google Cloud CLI.
    2. Führen Sie folgenden Befehl aus, um die gcloud CLI zu initialisieren:

      gcloud init
    3. Erstellen Sie lokale Anmeldedaten zur Authentifizierung für Ihr Google-Konto:

      gcloud auth application-default login

    Weitere Informationen: Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

    PHP

    Wenn Sie die PHP-Beispiele auf dieser Seite aus einer lokalen Entwicklungsumgebung heraus verwenden möchten, installieren und initialisieren Sie die gcloud CLI und richten dann die Standardanmeldedaten für Anwendungen mit Ihren Nutzeranmeldedaten ein.

    1. Installieren Sie die Google Cloud CLI.
    2. Führen Sie folgenden Befehl aus, um die gcloud CLI zu initialisieren:

      gcloud init
    3. Erstellen Sie lokale Anmeldedaten zur Authentifizierung für Ihr Google-Konto:

      gcloud auth application-default login

    Weitere Informationen: Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

    Python

    Wenn Sie die Python-Beispiele auf dieser Seite aus einer lokalen Entwicklungsumgebung heraus verwenden möchten, installieren und initialisieren Sie die gcloud CLI und richten dann die Standardanmeldedaten für Anwendungen mit Ihren Nutzeranmeldedaten ein.

    1. Installieren Sie die Google Cloud CLI.
    2. Führen Sie folgenden Befehl aus, um die gcloud CLI zu initialisieren:

      gcloud init
    3. Erstellen Sie lokale Anmeldedaten zur Authentifizierung für Ihr Google-Konto:

      gcloud auth application-default login

    Weitere Informationen: Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

    Ruby

    Wenn Sie die Ruby-Beispiele auf dieser Seite aus einer lokalen Entwicklungsumgebung heraus verwenden möchten, installieren und initialisieren Sie die gcloud CLI und richten dann die Standardanmeldedaten für Anwendungen mit Ihren Nutzeranmeldedaten ein.

    1. Installieren Sie die Google Cloud CLI.
    2. Führen Sie folgenden Befehl aus, um die gcloud CLI zu initialisieren:

      gcloud init
    3. Erstellen Sie lokale Anmeldedaten zur Authentifizierung für Ihr Google-Konto:

      gcloud auth application-default login

    Weitere Informationen: Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

    REST

    Verwenden Sie die von der gcloud CLI bereitgestellten Anmeldedaten, um die REST API-Beispiele auf dieser Seite in einer lokalen Entwicklungsumgebung zu verwenden.

      Installieren Sie die Google Cloud CLI und initialisieren Sie sie mit folgendem Befehl:

      gcloud init

Erforderliche Rollen

Um die Berechtigungen zu erhalten, die Sie für die Erstellung von VMs benötigen, bitten Sie Ihren Administrator, Ihnen die IAM-Rolle Compute Instance Admin (v1) (roles/compute.instanceAdmin.v1) für das Projekt zu gewähren. Weitere Informationen zum Zuweisen von Rollen finden Sie unter Zugriff verwalten.

Diese vordefinierte Rolle enthält die Berechtigungen, die zum Erstellen von VMs erforderlich sind. Erweitern Sie den Abschnitt Erforderliche Berechtigungen, um die erforderlichen Berechtigungen anzuzeigen:

Erforderliche Berechtigungen

Die folgenden Berechtigungen sind zum Erstellen von VMs erforderlich:

  • compute.instances.create für das Projekt
  • So erstellen Sie die VM mit einem benutzerdefinierten Image: compute.images.useReadOnly für das Image
  • So erstellen Sie die VM mit einem Snapshot: compute.snapshots.useReadOnly für den Snapshot
  • So verwenden Sie eine Instanzvorlage zum Erstellen der VM: compute.instanceTemplates.useReadOnly für die Instanzvorlage
  • So weisen Sie der VM ein Legacy-Netzwerk zu: compute.networks.use für das Projekt
  • So geben Sie eine statische IP-Adresse für die VM an: compute.addresses.use für das Projekt
  • So weisen Sie der VM eine externe IP-Adresse zu, wenn Sie ein Legacy-Netzwerk verwenden: compute.networks.useExternalIp für das Projekt.
  • So geben Sie ein Subnetz für Ihre VM an: compute.subnetworks.use für das Projekt oder für das ausgewählte Subnetz
  • So weisen Sie der VM eine externe IP-Adresse zu, wenn Sie ein VPC-Netzwerk verwenden: compute.subnetworks.useExternalIp für das Projekt oder im ausgewählten Subnetz.
  • So legen Sie VM-Instanzmetadaten für die VM fest: compute.instances.setMetadata für das Projekt
  • Zum Festlegen von Tags für die VM: compute.instances.setTags auf der VM
  • So legen Sie Labels für die VM fest: compute.instances.setLabels für die VM
  • So legen Sie ein Dienstkonto für die VM fest: compute.instances.setServiceAccount für die VM
  • So erstellen Sie ein neues Laufwerk für die VM: compute.disks.create für das Projekt
  • So hängen Sie ein vorhandenes Laufwerk im Lese- oder Lese-/Schreibmodus an: compute.disks.use auf dem Laufwerk
  • So hängen Sie ein vorhandenes Laufwerk im Lesemodus an: compute.disks.useReadOnly auf dem Laufwerk

Sie können diese Berechtigungen auch mit benutzerdefinierten Rollen oder anderen vordefinierten Rollen erhalten.

VM-Instanz aus einem Image erstellen

In diesem Abschnitt wird gezeigt, wie Sie eine VM ausgehend von einem öffentlichen Betriebssystem-Image oder einem benutzerdefinierten Image erstellen. Eine VM enthält einen Bootloader, ein Boot-Dateisystem und ein Betriebssystem-Image.

Liste der in Compute Engine verfügbaren öffentlichen Images aufrufen

Bevor Sie eine VM mit einem öffentlichen Image erstellen, sollten Sie die Liste der öffentlichen Images prüfen, die in Compute Engine verfügbar sind.

Weitere Informationen zu den mit öffentlichen Images verfügbaren Features finden Sie unter Featureunterstützung nach Betriebssystem.

Console

  1. Rufen Sie in der Google Cloud Console die Seite Images auf.

    Zur Seite „Images“

gcloud

  1. Führen Sie dazu diesen Befehl aus:

    gcloud compute images list
  2. Notieren Sie sich den Namen des Images oder der Image-Familie und den Namen des Projekts, das das Image enthält.

  3. Optional: Führen Sie den folgenden Befehl aus, um festzustellen, ob das Image Shielded VM-Funktionen unterstützt:

    gcloud compute images describe IMAGE_NAME \
        --project=IMAGE_PROJECT
    

    Ersetzen Sie Folgendes:

    • IMAGE_NAME ist der Name des Images, das auf die Unterstützung von Shielded VM-Features geprüft werden soll.
    • IMAGE_PROJECT ist das Projekt, das das Image enthält.

    Wenn das Image Shielded VM-Features unterstützt, wird in der Ausgabe die folgende Zeile angezeigt: type: UEFI_COMPATIBLE.

C#

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von C# in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine C# API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


using Google.Cloud.Compute.V1;
using System;
using System.Threading.Tasks;

public class ListImagesAsyncSample
{
    public async Task ListImagesAsync(
        // TODO(developer): Set your own default values for these parameters or pass different values when calling this method.
        string projectId = "your-project-id")
    {
        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests.
        ImagesClient client = await ImagesClient.CreateAsync();

        // Make the request to list all non-deprecated images in a project.
        ListImagesRequest request = new ListImagesRequest
        {
            Project = projectId,
            // Listing only non-deprecated images to reduce the size of the reply.
            Filter = "deprecated.state != DEPRECATED",
            // MaxResults indicates the maximum number of items that will be returned per page.
            MaxResults = 100
        };

        // Although the MaxResults parameter is specified in the request, the sequence returned
        // by the ListAsync() method hides the pagination mechanic. The library makes multiple
        // requests to the API for you, so you can simply iterate over all the images.
        await foreach (var image in client.ListAsync(request))
        {
            // The result is an Image collection.
            Console.WriteLine($"Image: {image.Name}");
        }
    }
}

Go

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Go in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Go API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	"google.golang.org/api/iterator"
	computepb "google.golang.org/genproto/googleapis/cloud/compute/v1"
	"google.golang.org/protobuf/proto"
)

// printImagesList prints a list of all non-deprecated image names available in given project.
func printImagesList(w io.Writer, projectID string) error {
	// projectID := "your_project_id"
	ctx := context.Background()
	imagesClient, err := compute.NewImagesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewImagesRESTClient: %w", err)
	}
	defer imagesClient.Close()

	// Listing only non-deprecated images to reduce the size of the reply.
	req := &computepb.ListImagesRequest{
		Project:    projectID,
		MaxResults: proto.Uint32(3),
		Filter:     proto.String("deprecated.state != DEPRECATED"),
	}

	// Although the `MaxResults` parameter is specified in the request, the iterator returned
	// by the `list()` method hides the pagination mechanic. The library makes multiple
	// requests to the API for you, so you can simply iterate over all the images.
	it := imagesClient.List(ctx, req)
	for {
		image, err := it.Next()
		if err == iterator.Done {
			break
		}
		if err != nil {
			return err
		}
		fmt.Fprintf(w, "- %s\n", image.GetName())
	}
	return nil
}

Java

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Java in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Java API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


import com.google.cloud.compute.v1.Image;
import com.google.cloud.compute.v1.ImagesClient;
import com.google.cloud.compute.v1.ImagesClient.ListPage;
import com.google.cloud.compute.v1.ListImagesRequest;
import java.io.IOException;
  // Prints a list of all non-deprecated image names available in given project.
  public static void listImages(String project) throws IOException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the `instancesClient.close()` method on the client to
    // safely clean up any remaining background resources.
    try (ImagesClient imagesClient = ImagesClient.create()) {

      // Listing only non-deprecated images to reduce the size of the reply.
      ListImagesRequest imagesRequest = ListImagesRequest.newBuilder()
          .setProject(project)
          .setMaxResults(100)
          .setFilter("deprecated.state != DEPRECATED")
          .build();

      // Although the `setMaxResults` parameter is specified in the request, the iterable returned
      // by the `list()` method hides the pagination mechanic. The library makes multiple
      // requests to the API for you, so you can simply iterate over all the images.
      int imageCount = 0;
      for (Image image : imagesClient.list(imagesRequest).iterateAll()) {
        imageCount++;
        System.out.println(image.getName());
      }
      System.out.printf("Image count in %s is: %s", project, imageCount);
    }
  }

Node.js

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Node.js in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Node.js API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';

const compute = require('@google-cloud/compute');

async function listImages() {
  const imagesClient = new compute.ImagesClient();

  // Listing only non-deprecated images to reduce the size of the reply.
  const images = imagesClient.listAsync({
    project: projectId,
    maxResults: 3,
    filter: 'deprecated.state != DEPRECATED',
  });

  // Although the `maxResults` parameter is specified in the request, the iterable returned
  // by the `listAsync()` method hides the pagination mechanic. The library makes multiple
  // requests to the API for you, so you can simply iterate over all the images.
  for await (const image of images) {
    console.log(` - ${image.name}`);
  }
}

listImages();

PHP

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von PHP in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine PHP API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

use Google\Cloud\Compute\V1\Client\ImagesClient;
use Google\Cloud\Compute\V1\ListImagesRequest;

/**
 * Prints a list of all non-deprecated image names available in given project.
 *
 * @param string $projectId Project ID or project number of the Cloud project you want to list images from.
 *
 * @throws \Google\ApiCore\ApiException if the remote call fails.
 */
function list_all_images(string $projectId)
{
    $imagesClient = new ImagesClient();
    // Listing only non-deprecated images to reduce the size of the reply.
    $optionalArgs = ['maxResults' => 100, 'filter' => 'deprecated.state != DEPRECATED'];

    /**
     * Although the maxResults parameter is specified in the request, the iterateAllElements() method
     * hides the pagination mechanic. The library makes multiple requests to the API for you,
     * so you can simply iterate over all the images.
     */
    $request = (new ListImagesRequest())
        ->setProject($projectId)
        ->setMaxResults($optionalArgs['maxResults'])
        ->setFilter($optionalArgs['filter']);
    $pagedResponse = $imagesClient->list($request);
    print('=================== Flat list of images ===================' . PHP_EOL);
    foreach ($pagedResponse->iterateAllElements() as $element) {
        printf(' - %s' . PHP_EOL, $element->getName());
    }
}

Python

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Python in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Python API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

import google.cloud.compute_v1 as compute_v1

def print_images_list(project: str) -> str:
    """
    Prints a list of all non-deprecated image names available in given project.

    Args:
        project: project ID or project number of the Cloud project you want to list images from.

    Returns:
        The output as a string.
    """
    images_client = compute_v1.ImagesClient()
    # Listing only non-deprecated images to reduce the size of the reply.
    images_list_request = compute_v1.ListImagesRequest(
        project=project, max_results=100, filter="deprecated.state != DEPRECATED"
    )
    output = []

    # Although the `max_results` parameter is specified in the request, the iterable returned
    # by the `list()` method hides the pagination mechanic. The library makes multiple
    # requests to the API for you, so you can simply iterate over all the images.
    for img in images_client.list(request=images_list_request):
        print(f" -  {img.name}")
        output.append(f" -  {img.name}")
    return "\n".join(output)

Ruby

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Ruby in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Ruby API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


require "google/cloud/compute/v1"

# Prints a list of all non-deprecated image names available in given project.
#
# @param [String] project project ID or project number of the Cloud project you want to list images from.
def print_images_list project:
  client = ::Google::Cloud::Compute::V1::Images::Rest::Client.new

  # Make the request to list all non-deprecated images in a project.
  request = {
    project: project,
    # max_results indicates the maximum number of items that will be returned per page.
    max_results: 100,
    # Listing only non-deprecated images to reduce the size of the reply.
    filter: "deprecated.state != DEPRECATED"
  }

  # Although the `max_results` parameter is specified in the request, the iterable returned
  # by the `list` method hides the pagination mechanic. The library makes multiple
  # requests to the API for you, so you can simply iterate over all the images.
  client.list(request).each do |image|
    puts " - #{image.name}"
  end
end

REST

  1. Führen Sie dazu diesen Befehl aus:

    GET https://compute.googleapis.com/compute/v1/projects/IMAGE_PROJECT/global/images/
    
  2. Notieren Sie sich den Namen des Images oder der Image-Familie und den Namen des Projekts, das das Image enthält.

  3. Optional: Führen Sie den folgenden Befehl aus, um festzustellen, ob das Image Shielded VM-Funktionen unterstützt:

    GET https://compute.googleapis.com/compute/v1/projects/IMAGE_PROJECT/global/images/IMAGE_NAME
    

    Dabei gilt:

    • IMAGE_PROJECT ist das Projekt, das das Image enthält.
    • IMAGE_NAME ist der Name des Images, das auf die Unterstützung von Shielded VM-Features geprüft werden soll.

    Wenn das Image Shielded VM-Features unterstützt, wird in der Ausgabe die folgende Zeile angezeigt: type: UEFI_COMPATIBLE.

Eine VM-Instanz aus einem öffentlichen Image erstellen

Google, Open-Source-Communities und Drittanbieter stellen öffentliche Betriebssystem-Images bereit und pflegen diese. Standardmäßig lassen sich mit allen Google Cloud-Projekten VMs aus öffentlichen Betriebssystem-Images erstellen. Wenn für Ihr GoogleCloud-Projekt jedoch eine definierte Liste vertrauenswürdiger Images vorhanden ist, können Sie zum Erstellen einer VM nur die Images dieser Liste verwenden.

Wenn Sie ein Shielded VM-Image mit einer lokalen SSD erstellen, können Sie Daten nicht mit dem Integritätsmonitoring oder mit dem Virtual Trusted Platform Module (vTPM) schützen.

Console

  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu „VM-Instanzen“

  2. Wählen Sie Ihr Projekt aus und klicken Sie auf Weiter.

  3. Klicken Sie auf Instanz erstellen.

  4. Geben Sie einen Namen für Ihre VM an. Weitere Informationen finden Sie unter Namenskonvention für Ressourcen.

  5. Ändern Sie optional die Zone für diese VM. In Compute Engine wird die Liste der Zonen in jeder Region zufällig angeordnet, um die Verwendung in mehreren Zonen zu fördern.

  6. Wählen Sie eine Maschinenkonfiguration für Ihre VM aus.

  7. Klicken Sie im Abschnitt Bootlaufwerk auf Ändern und gehen Sie dann so vor:

    1. Wählen Sie auf dem Tab Öffentliche Images Folgendes aus:
      • Betriebssystem
      • Betriebssystemversion
      • Bootlaufwerktyp
      • Größe des Bootlaufwerks
    2. Optional: Klicken Sie für erweiterte Konfigurationsoptionen auf Erweiterte Konfiguration anzeigen.
    3. Klicken Sie auf Auswählen, um die Bootlaufwerksoptionen zu bestätigen.
  8. Wählen Sie im Bereich Firewall die Option HTTP-Traffic zulassen oder HTTPS-Traffic zulassen aus, damit die VM HTTP- oder HTTPS-Traffic empfangen kann. Wenn Sie eine dieser Optionen auswählen, fügt Compute Engine Ihrer VM ein Netzwerktag hinzu, das die Firewallregel mit der VM verknüpft. Anschließend erstellt Compute Engine die entsprechende Firewallregel für eingehenden Traffic, die den gesamten eingehenden Traffic über tcp:80 (HTTP) oder tcp:443 (HTTPS) zulässt.

  9. Wenn Sie ein Betriebssystem-Image ausgewählt haben, das Shielded VM-Funktionen unterstützt, können Sie optional die Einstellungen für Shielded VM ändern: Wenn Sie die Einstellungen für Shielded VM ändern möchten, maximieren Sie im Abschnitt Netzwerk, Laufwerke, Sicherheit, Verwaltung, einzelne Mandanten den Abschnitt Sicherheit und führen Sie je nach Bedarf die folgenden Schritte aus:

  10. Klicken Sie zum Erstellen und Starten der VM auf Erstellen.

gcloud

  1. Wählen Sie ein öffentliches Image aus. Notieren Sie sich den Namen des Images oder der Image-Familie und den Namen des Projekts, das das Image enthält.
  2. Erstellen Sie mit dem Befehl gcloud compute instances create eine VM aus einer Image-Familie oder aus einer bestimmten Version eines Betriebssystem-Images:

    Wenn Sie das optionale Flag --shielded-secure-boot angeben, erstellt Compute Engine eine VM, bei der alle drei Shielded VM-Features aktiviert sind:

    Nachdem Compute Engine Ihre VM gestartet hat, müssen Sie die VM beenden, um Shielded VM-Optionen zu ändern.

    gcloud compute instances create VM_NAME \
        [--image=IMAGE | --image-family=IMAGE_FAMILY] \
        --image-project=IMAGE_PROJECT
        --machine-type=MACHINE_TYPE

    Dabei gilt:

    • VM_NAME ist der Name der neuen VM.
    • Für IMAGE oder IMAGE_FAMILY muss eine der folgenden Optionen angegeben werden:

      • IMAGE ist eine bestimmte Version eines öffentlichen Images.

        z. B. --image=debian-10-buster-v20200309.

      • IMAGE_FAMILY ist eine Image-Familie.

        Dadurch wird die VM aus dem neuesten nicht verworfenen Betriebssystem-Image erstellt. Wenn Sie beispielsweise --image-family=debian-10 angeben, legt Compute Engine eine VM aus der neuesten Version des Betriebssystem-Images in der Debian 10-Image-Familie an.

    • IMAGE_PROJECT ist das Projekt, das das Image enthält.

    • MACHINE_TYPE legt einen vordefinierten oder benutzerdefinierten Maschinentyp für die neue VM fest.

      Verwenden Sie zum Abrufen einer Liste der in einer Zone verfügbaren Maschinentypen den Befehl gcloud compute machine-types list mit dem Flag --zones.

  3. Prüfen Sie, ob Compute Engine die VM erstellt hat:

    gcloud compute instances describe VM_NAME
    

    Ersetzen Sie VM_NAME durch den Namen der VM.

Terraform

Zum Erstellen einer VM können Sie die Ressource google_compute_instance verwenden.


# Create a VM instance from a public image
# in the `default` VPC network and subnet

resource "google_compute_instance" "default" {
  name         = "my-vm"
  machine_type = "n1-standard-1"
  zone         = "us-central1-a"

  boot_disk {
    initialize_params {
      image = "ubuntu-minimal-2210-kinetic-amd64-v20230126"
    }
  }

  network_interface {
    network = "default"
    access_config {}
  }
}

Informationen zum Anwenden oder Entfernen einer Terraform-Konfiguration finden Sie unter Grundlegende Terraform-Befehle.

Zum Generieren des Terraform-Codes können Sie die Komponente Entsprechender Code in der Google Cloud Console verwenden.
  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu Seite „VM-Instanzen“

  2. Klicken Sie auf Instanz erstellen.
  3. Geben Sie die gewünschten Parameter an.
  4. Klicken Sie oben oder unten auf der Seite auf Entsprechender Code und dann auf den Tab Terraform, um den Terraform-Code aufzurufen.

C#

C#

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von C# in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine C# API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


using Google.Cloud.Compute.V1;
using System.Threading.Tasks;

public class CreateInstanceAsyncSample
{
    public async Task CreateInstanceAsync(
        // TODO(developer): Set your own default values for these parameters or pass different values when calling this method.
        string projectId = "your-project-id",
        string zone = "us-central1-a",
        string machineName = "test-machine",
        string machineType = "n1-standard-1",
        string diskImage = "projects/debian-cloud/global/images/family/debian-10",
        long diskSizeGb = 10,
        string networkName = "default")
    {
        Instance instance = new Instance
        {
            Name = machineName,
            // See https://cloud.google.com/compute/docs/machine-types for more information on machine types.
            MachineType = $"zones/{zone}/machineTypes/{machineType}",
            // Instance creation requires at least one persistent disk.
            Disks =
            {
                new AttachedDisk
                {
                    AutoDelete = true,
                    Boot = true,
                    Type = ComputeEnumConstants.AttachedDisk.Type.Persistent,
                    InitializeParams = new AttachedDiskInitializeParams
                    {
                        // See https://cloud.google.com/compute/docs/images for more information on available images.
                        SourceImage = diskImage,
                        DiskSizeGb = diskSizeGb
                    }
                }
            },
            NetworkInterfaces = { new NetworkInterface { Name = networkName } }
        };

        // Initialize client that will be used to send requests. This client only needs to be created
        // once, and can be reused for multiple requests.
        InstancesClient client = await InstancesClient.CreateAsync();

        // Insert the instance in the specified project and zone.
        var instanceCreation = await client.InsertAsync(projectId, zone, instance);

        // Wait for the operation to complete using client-side polling.
        // The server-side operation is not affected by polling,
        // and might finish successfully even if polling times out.
        await instanceCreation.PollUntilCompletedAsync();
    }
}

Go

Go

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Go in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Go API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "google.golang.org/genproto/googleapis/cloud/compute/v1"
	"google.golang.org/protobuf/proto"
)

// createInstance sends an instance creation request to the Compute Engine API and waits for it to complete.
func createInstance(w io.Writer, projectID, zone, instanceName, machineType, sourceImage, networkName string) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// machineType := "n1-standard-1"
	// sourceImage := "projects/debian-cloud/global/images/family/debian-10"
	// networkName := "global/networks/default"

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	req := &computepb.InsertInstanceRequest{
		Project: projectID,
		Zone:    zone,
		InstanceResource: &computepb.Instance{
			Name: proto.String(instanceName),
			Disks: []*computepb.AttachedDisk{
				{
					InitializeParams: &computepb.AttachedDiskInitializeParams{
						DiskSizeGb:  proto.Int64(10),
						SourceImage: proto.String(sourceImage),
					},
					AutoDelete: proto.Bool(true),
					Boot:       proto.Bool(true),
					Type:       proto.String(computepb.AttachedDisk_PERSISTENT.String()),
				},
			},
			MachineType: proto.String(fmt.Sprintf("zones/%s/machineTypes/%s", zone, machineType)),
			NetworkInterfaces: []*computepb.NetworkInterface{
				{
					Name: proto.String(networkName),
				},
			},
		},
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Java in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Java API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


import com.google.api.gax.longrunning.OperationFuture;
import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.AttachedDisk.Type;
import com.google.cloud.compute.v1.AttachedDiskInitializeParams;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateInstance {

  public static void main(String[] args)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample.
    String project = "your-project-id";
    String zone = "zone-name";
    String instanceName = "instance-name";
    createInstance(project, zone, instanceName);
  }

  // Create a new instance with the provided "instanceName" value in the specified project and zone.
  public static void createInstance(String project, String zone, String instanceName)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    // Below are sample values that can be replaced.
    // machineType: machine type of the VM being created.
    // *   This value uses the format zones/{zone}/machineTypes/{type_name}.
    // *   For a list of machine types, see https://cloud.google.com/compute/docs/machine-types
    // sourceImage: path to the operating system image to mount.
    // *   For details about images you can mount, see https://cloud.google.com/compute/docs/images
    // diskSizeGb: storage size of the boot disk to attach to the instance.
    // networkName: network interface to associate with the instance.
    String machineType = String.format("zones/%s/machineTypes/n1-standard-1", zone);
    String sourceImage = String
        .format("projects/debian-cloud/global/images/family/%s", "debian-11");
    long diskSizeGb = 10L;
    String networkName = "default";

    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the `instancesClient.close()` method on the client to safely
    // clean up any remaining background resources.
    try (InstancesClient instancesClient = InstancesClient.create()) {
      // Instance creation requires at least one persistent disk and one network interface.
      AttachedDisk disk =
          AttachedDisk.newBuilder()
              .setBoot(true)
              .setAutoDelete(true)
              .setType(Type.PERSISTENT.toString())
              .setDeviceName("disk-1")
              .setInitializeParams(
                  AttachedDiskInitializeParams.newBuilder()
                      .setSourceImage(sourceImage)
                      .setDiskSizeGb(diskSizeGb)
                      .build())
              .build();

      // Use the network interface provided in the networkName argument.
      NetworkInterface networkInterface = NetworkInterface.newBuilder()
          .setName(networkName)
          .build();

      // Bind `instanceName`, `machineType`, `disk`, and `networkInterface` to an instance.
      Instance instanceResource =
          Instance.newBuilder()
              .setName(instanceName)
              .setMachineType(machineType)
              .addDisks(disk)
              .addNetworkInterfaces(networkInterface)
              .build();

      System.out.printf("Creating instance: %s at %s %n", instanceName, zone);

      // Insert the instance in the specified project and zone.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(project)
          .setZone(zone)
          .setInstanceResource(instanceResource)
          .build();

      OperationFuture<Operation, Operation> operation = instancesClient.insertAsync(
          insertInstanceRequest);

      // Wait for the operation to complete.
      Operation response = operation.get(3, TimeUnit.MINUTES);

      if (response.hasError()) {
        System.out.println("Instance creation failed ! ! " + response);
        return;
      }
      System.out.println("Operation Status: " + response.getStatus());
    }
  }
}

Node.js

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Node.js in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Node.js API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b'
// const instanceName = 'YOUR_INSTANCE_NAME'
// const machineType = 'n1-standard-1';
// const sourceImage = 'projects/debian-cloud/global/images/family/debian-10';
// const networkName = 'global/networks/default';

const compute = require('@google-cloud/compute');

// Create a new instance with the values provided above in the specified project and zone.
async function createInstance() {
  const instancesClient = new compute.InstancesClient();

  console.log(`Creating the ${instanceName} instance in ${zone}...`);

  const [response] = await instancesClient.insert({
    instanceResource: {
      name: instanceName,
      disks: [
        {
          // Describe the size and source image of the boot disk to attach to the instance.
          initializeParams: {
            diskSizeGb: '10',
            sourceImage,
          },
          autoDelete: true,
          boot: true,
          type: 'PERSISTENT',
        },
      ],
      machineType: `zones/${zone}/machineTypes/${machineType}`,
      networkInterfaces: [
        {
          // Use the network interface provided in the networkName argument.
          name: networkName,
        },
      ],
    },
    project: projectId,
    zone,
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createInstance();

PHP

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von PHP in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine PHP API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

use Google\Cloud\Compute\V1\AttachedDisk;
use Google\Cloud\Compute\V1\AttachedDiskInitializeParams;
use Google\Cloud\Compute\V1\Client\InstancesClient;
use Google\Cloud\Compute\V1\Enums\AttachedDisk\Type;
use Google\Cloud\Compute\V1\InsertInstanceRequest;

/**
 * To correctly handle string enums in Cloud Compute library
 * use constants defined in the Enums subfolder.
 */
use Google\Cloud\Compute\V1\Instance;
use Google\Cloud\Compute\V1\NetworkInterface;

/**
 * Creates an instance in the specified project and zone.
 *
 * @param string $projectId Project ID of the Cloud project to create the instance in.
 * @param string $zone Zone to create the instance in (like "us-central1-a").
 * @param string $instanceName Unique name for this Compute Engine instance.
 * @param string $machineType Machine type of the instance being created.
 * @param string $sourceImage Boot disk image name or family.
 * @param string $networkName Network interface to associate with the instance.
 *
 * @throws \Google\ApiCore\ApiException if the remote call fails.
 * @throws \Google\ApiCore\ValidationException if local error occurs before remote call.
 */
function create_instance(
    string $projectId,
    string $zone,
    string $instanceName,
    string $machineType = 'n1-standard-1',
    string $sourceImage = 'projects/debian-cloud/global/images/family/debian-11',
    string $networkName = 'global/networks/default'
) {
    // Set the machine type using the specified zone.
    $machineTypeFullName = sprintf('zones/%s/machineTypes/%s', $zone, $machineType);

    // Describe the source image of the boot disk to attach to the instance.
    $diskInitializeParams = (new AttachedDiskInitializeParams())
        ->setSourceImage($sourceImage);
    $disk = (new AttachedDisk())
        ->setBoot(true)
        ->setAutoDelete(true)
        ->setType(Type::PERSISTENT)
        ->setInitializeParams($diskInitializeParams);

    // Use the network interface provided in the $networkName argument.
    $network = (new NetworkInterface())
        ->setName($networkName);

    // Create the Instance object.
    $instance = (new Instance())
        ->setName($instanceName)
        ->setDisks([$disk])
        ->setMachineType($machineTypeFullName)
        ->setNetworkInterfaces([$network]);

    // Insert the new Compute Engine instance using InstancesClient.
    $instancesClient = new InstancesClient();
    $request = (new InsertInstanceRequest())
        ->setInstanceResource($instance)
        ->setProject($projectId)
        ->setZone($zone);
    $operation = $instancesClient->insert($request);

    // Wait for the operation to complete.
    $operation->pollUntilComplete();
    if ($operation->operationSucceeded()) {
        printf('Created instance %s' . PHP_EOL, $instanceName);
    } else {
        $error = $operation->getError();
        printf('Instance creation failed: %s' . PHP_EOL, $error?->getMessage());
    }
}

Python

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Python in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Python API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

from __future__ import annotations

import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1

def get_image_from_family(project: str, family: str) -> compute_v1.Image:
    """
    Retrieve the newest image that is part of a given family in a project.

    Args:
        project: project ID or project number of the Cloud project you want to get image from.
        family: name of the image family you want to get image from.

    Returns:
        An Image object.
    """
    image_client = compute_v1.ImagesClient()
    # List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details
    newest_image = image_client.get_from_family(project=project, family=family)
    return newest_image

def disk_from_image(
    disk_type: str,
    disk_size_gb: int,
    boot: bool,
    source_image: str,
    auto_delete: bool = True,
) -> compute_v1.AttachedDisk:
    """
    Create an AttachedDisk object to be used in VM instance creation. Uses an image as the
    source for the new disk.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        source_image: source image to use when creating this disk. You must have read access to this disk. This can be one
            of the publicly available images or an image from one of your projects.
            This value uses the following format: "projects/{project_name}/global/images/{image_name}"
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created using the specified image.
    """
    boot_disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.source_image = source_image
    initialize_params.disk_size_gb = disk_size_gb
    initialize_params.disk_type = disk_type
    boot_disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    boot_disk.auto_delete = auto_delete
    boot_disk.boot = boot
    return boot_disk

def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result

def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)

Ruby

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Ruby in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Ruby API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


require "google/cloud/compute/v1"

# Sends an instance creation request to the Compute Engine API and waits for it to complete.
#
# @param [String] project project ID or project number of the Cloud project you want to use.
# @param [String] zone name of the zone you want to use. For example: "us-west3-b"
# @param [String] instance_name name of the new virtual machine.
# @param [String] machine_type machine type of the VM being created. For example: "e2-standard-2"
#         See https://cloud.google.com/compute/docs/machine-types for more information
#         on machine types.
# @param [String] source_image path to the operating system image to mount on your boot
#         disk. This can be one of the public images
#         (like "projects/debian-cloud/global/images/family/debian-10")
#         or a private image you have access to.
#         See https://cloud.google.com/compute/docs/images for more information on available images.
# @param [String] network_name name of the network you want the new instance to use.
#         For example: "global/networks/default" represents the `default`
#         network interface, which is created automatically for each project.
def create_instance project:, zone:, instance_name:,
                    machine_type: "n2-standard-2",
                    source_image: "projects/debian-cloud/global/images/family/debian-10",
                    network_name: "global/networks/default"
  # Initialize client that will be used to send requests. This client only needs to be created
  # once, and can be reused for multiple requests.
  client = ::Google::Cloud::Compute::V1::Instances::Rest::Client.new

  # Construct the instance object.
  # It can be either a hash or ::Google::Cloud::Compute::V1::Instance instance.
  instance = {
    name: instance_name,
    machine_type: "zones/#{zone}/machineTypes/#{machine_type}",
    # Instance creation requires at least one persistent disk.
    disks: [{
      auto_delete: true,
      boot: true,
      type: :PERSISTENT,
      initialize_params: {
        source_image: source_image,
        disk_size_gb: 10
      }
    }],
    network_interfaces: [{ name: network_name }]
  }

  # Prepare a request to create the instance in the specified project and zone.
  request = { project: project, zone: zone, instance_resource: instance }

  puts "Creating the #{instance_name} instance in #{zone}..."
  begin
    # Send the insert request.
    operation = client.insert request
    # Wait for the create operation to complete.
    operation = wait_until_done operation: operation

    if operation.error?
      warn "Error during creation:", operation.error
    else
      compute_operation = operation.operation
      warn "Warning during creation:", compute_operation.warnings unless compute_operation.warnings.empty?
      puts "Instance #{instance_name} created."
    end
  rescue ::Google::Cloud::Error => e
    warn "Exception during creation:", e
  end
end

REST

  1. Wählen Sie ein öffentliches Image aus. Notieren Sie sich den Namen des Images oder der Image-Familie und den Namen des Projekts, das das Image enthält.
  2. Erstellen Sie mit der Methode instances.insert eine VM aus einer Image-Familie oder einer bestimmten Version eines Betriebssystem-Images:

    POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances
    
    {
       "machineType":"zones/MACHINE_TYPE_ZONE/machineTypes/MACHINE_TYPE",
       "name":"VM_NAME",
    
       "disks":[
          {
             "initializeParams":{
                "sourceImage":"projects/IMAGE_PROJECT/global/images/IMAGE"
             },
             "boot":true
          }
       ],
    
       "networkInterfaces":[
          {
             "network":"global/networks/NETWORK_NAME"
          }
       ],
    
       "shieldedInstanceConfig":{
          "enableSecureBoot":"ENABLE_SECURE_BOOT"
       }
    }
    

    Dabei gilt:

    • PROJECT_ID ist die ID des Projekts, in dem die VM erstellt werden soll.
    • ZONE ist die Zone, in der die VM erstellt werden soll.
    • MACHINE_TYPE_ZONE ist die Zone mit dem Maschinentyp, der für die neue VM verwendet werden soll.
    • MACHINE_TYPE legt einen vordefinierten oder benutzerdefinierten Maschinentyp für die neue VM fest.
    • VM_NAME ist der Name der neuen VM.
    • IMAGE_PROJECT: Projekt, das das Image enthält
      Wenn Sie beispielsweise debian-10 als Image-Familie angeben, geben Sie debian-cloud als Image-Projekt an.
    • IMAGE or IMAGE_FAMILY: Wählen Sie eine der folgenden Optionen aus:
      • IMAGE: eine bestimmte Version eines öffentlichen Images
        Beispiel: "sourceImage": "projects/debian-cloud/global/images/debian-10-buster-v20200309"
      • IMAGE_FAMILY: eine Image-Familie
        . Dadurch wird die VM aus dem neuesten nicht verworfenen Betriebssystem-Image erstellt. Wenn Sie beispielsweise "sourceImage": "projects/debian-cloud/global/images/family/debian-10" angeben, legt Compute Engine eine VM aus der neuesten Version des Betriebssystem-Images in der Debian 10-Image-Familie an.
    • NETWORK_NAME: das VPC-Netzwerk, das Sie für die VM verwenden möchten. Sie können default angeben, um Ihr Standardnetzwerk zu verwenden.
    • ENABLE_SECURE_BOOT: (Optional) Wenn Sie ein Image ausgewählt haben, das Shielded VM-Features unterstützt, aktiviert Compute Engine standardmäßig das Virtual Trusted Platform Module (vTPM) und das Integritätsmonitoring. Compute Engine aktiviert nicht standardmäßig Secure Boot.

      Wenn Sie für enableSecureBoot den Wert true angeben, erstellt Compute Engine eine VM, bei der alle drei Shielded VM-Features aktiviert sind. Nachdem Compute Engine Ihre VM gestartet hat, müssen Sie die VM beenden, um Shielded VM-Optionen zu ändern.

VM aus einem benutzerdefinierten Image erstellen

Ein benutzerdefiniertes Image gehört nur zu Ihrem Projekt. Wenn Sie eine VM mit einem benutzerdefinierten Image erstellen möchten, müssen Sie zuerst ein benutzerdefiniertes Image erstellen.

Console

  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu „VM-Instanzen“

  2. Wählen Sie Ihr Projekt aus und klicken Sie auf Weiter.

  3. Klicken Sie auf Instanz erstellen.

  4. Geben Sie einen Namen für Ihre VM an. Weitere Informationen finden Sie unter Namenskonvention für Ressourcen.

  5. Ändern Sie optional die Zone für diese VM. In Compute Engine wird die Liste der Zonen in jeder Region zufällig angeordnet, um die Verwendung in mehreren Zonen zu fördern.

  6. Wählen Sie eine Maschinenkonfiguration für Ihre VM aus.

  7. Klicken Sie im Abschnitt Bootlaufwerk auf Ändern und gehen Sie dann so vor:

    1. Wählen Sie den Tab Benutzerdefinierte Images aus.
    2. Klicken Sie zum Auswählen des Image-Projekts auf Projekt auswählen und gehen Sie dann so vor:
      1. Wählen Sie das Projekt aus, das das Image enthält.
      2. Klicken Sie auf Öffnen.
    3. Klicken Sie in der Liste Image auf das Image, das Sie importieren möchten.
    4. Wählen Sie den Typ und die Größe des Bootlaufwerks aus.
    5. Optional: Klicken Sie für erweiterte Konfigurationsoptionen auf Erweiterte Konfiguration anzeigen.
    6. Klicken Sie auf Auswählen, um die Bootlaufwerksoptionen zu bestätigen.
  8. Wählen Sie im Bereich Firewall die Option HTTP-Traffic zulassen oder HTTPS-Traffic zulassen aus, um den HTTP- oder HTTPS-Traffic zur VM zuzulassen.

    In der Google Cloud Console werden der VM ein Netzwerk-Tag hinzugefügt und entsprechende Firewallregeln für eingehenden Traffic erstellt, die den gesamten eingehenden Traffic über tcp:80 (HTTP) oder tcp:443 (HTTPS) zulassen. Das Netzwerk-Tag ordnet die Firewallregel der VM zu. Weitere Informationen finden Sie unter Übersicht über Firewallregeln in der Cloud Next Generation Firewall-Dokumentation.

  9. Klicken Sie zum Erstellen und Starten der VM auf Erstellen.

gcloud

  1. Aktivieren Sie Cloud Shell in der Google Cloud Console.

    Cloud Shell aktivieren

    Unten in der Google Cloud Console wird eine Cloud Shell-Sitzung gestartet und eine Eingabeaufforderung angezeigt. Cloud Shell ist eine Shell-Umgebung, in der das Google Cloud CLI bereits installiert ist und Werte für Ihr aktuelles Projekt bereits festgelegt sind. Das Initialisieren der Sitzung kann einige Sekunden dauern.

  2. Mit dem Befehl gcloud compute instances create erstellen Sie eine VM mit einem benutzerdefinierten Image:

    gcloud compute instances create VM_NAME \
        --image-project IMAGE_PROJECT \
        [--image IMAGE | --image-family IMAGE_FAMILY]
        --subnet SUBNET
    

    Dabei gilt:

    • VM_NAME: Der Name der VM
    • IMAGE_PROJECT: Name des Projekts, das das Image enthält
    • Für IMAGE oder IMAGE_FAMILY muss eine der folgenden Optionen angegeben werden:
      • IMAGE: Name Ihres benutzerdefinierten Images

        z. B. --image=my-debian-image-v2.

      • IMAGE_FAMILY legt die benutzerdefinierte Image-Familie fest, wenn Sie Ihre benutzerdefinierten Images als Teil einer benutzerdefinierten Image-Familie erstellt haben.

        Dadurch wird die VM aus der neuesten nicht verworfenen Version des Betriebssystem des Betriebssystem-Images in Ihrer benutzerdefinierten Image-Familie erstellt. Wenn Sie beispielsweise --image-family=my-debian-family angeben, erstellt Compute Engine eine VM aus dem neuesten Betriebssystem-Image in Ihrer benutzerdefinierten Image-Familie my-debian-family.

    • SUBNET: Wenn sich das Subnetz und die Instanz im selben Projekt befinden, ersetzen Sie SUBNET durch den Namen eines Subnetzes, das sich in derselben Region wie die Instanz befindet.

Terraform

Zum Generieren des Terraform-Codes können Sie die Komponente Entsprechender Code in der Google Cloud Console verwenden.
  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu Seite „VM-Instanzen“

  2. Klicken Sie auf Instanz erstellen.
  3. Geben Sie die gewünschten Parameter an.
  4. Klicken Sie oben oder unten auf der Seite auf Entsprechender Code und dann auf den Tab Terraform, um den Terraform-Code aufzurufen.

Einfach loslegen (Go)

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Go in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Go API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "google.golang.org/genproto/googleapis/cloud/compute/v1"
	"google.golang.org/protobuf/proto"
)

// createInstanceFromCustomImage creates a new VM instance with custom image used as its boot disk.
func createInstanceFromCustomImage(w io.Writer, projectID, zone, instanceName, customImageLink string) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// customImageLink := "projects/project_name/global/images/image_name"

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	req := &computepb.InsertInstanceRequest{
		Project: projectID,
		Zone:    zone,
		InstanceResource: &computepb.Instance{
			Name: proto.String(instanceName),
			Disks: []*computepb.AttachedDisk{
				{
					InitializeParams: &computepb.AttachedDiskInitializeParams{
						DiskSizeGb:  proto.Int64(10),
						SourceImage: proto.String(customImageLink),
						DiskType:    proto.String(fmt.Sprintf("zones/%s/diskTypes/pd-standard", zone)),
					},
					AutoDelete: proto.Bool(true),
					Boot:       proto.Bool(true),
					Type:       proto.String(computepb.AttachedDisk_PERSISTENT.String()),
				},
			},
			MachineType: proto.String(fmt.Sprintf("zones/%s/machineTypes/n1-standard-1", zone)),
			NetworkInterfaces: []*computepb.NetworkInterface{
				{
					Name: proto.String("global/networks/default"),
				},
			},
		},
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Java in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Java API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


import com.google.api.gax.longrunning.OperationFuture;
import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.AttachedDisk.Type;
import com.google.cloud.compute.v1.AttachedDiskInitializeParams;
import com.google.cloud.compute.v1.Image;
import com.google.cloud.compute.v1.ImagesClient;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.Vector;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateInstancesAdvanced {

  /**
   * Create an AttachedDisk object to be used in VM instance creation. Uses an image as the source
   * for the new disk.
   *
   * @param diskType the type of disk you want to create. This value uses the following format:
   * "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)". For example:
   * "zones/us-west3-b/diskTypes/pd-ssd"
   * @param diskSizeGb size of the new disk in gigabytes
   * @param boot boolean flag indicating whether this disk should be used as a boot disk of an
   * instance
   * @param sourceImage source image to use when creating this disk. You must have read access to
   * this disk. This can be one of the publicly available images or an image from one of your
   * projects. This value uses the following format:
   * "projects/{project_name}/global/images/{image_name}"
   * @return AttachedDisk object configured to be created using the specified image.
   */
  private static AttachedDisk diskFromImage(String diskType, int diskSizeGb, boolean boot,
      String sourceImage) {
    AttachedDisk disk =
        AttachedDisk.newBuilder()
            .setBoot(boot)
            // Remember to set auto_delete to True if you want the disk to be deleted when
            // you delete your VM instance.
            .setAutoDelete(true)
            .setType(Type.PERSISTENT.toString())
            .setInitializeParams(
                AttachedDiskInitializeParams.newBuilder()
                    .setSourceImage(sourceImage)
                    .setDiskSizeGb(diskSizeGb)
                    .setDiskType(diskType)
                    .build())
            .build();
    return disk;
  }

  /**
   * Send an instance creation request to the Compute Engine API and wait for it to complete.
   *
   * @param project project ID or project number of the Cloud project you want to use.
   * @param zone name of the zone to create the instance in. For example: "us-west3-b"
   * @param instanceName name of the new virtual machine (VM) instance.
   * @param disks a list of compute_v1.AttachedDisk objects describing the disks you want to attach
   * to your new instance.
   * @param machineType machine type of the VM being created. This value uses the following format:
   * "zones/{zone}/machineTypes/{type_name}".
   * For example: "zones/europe-west3-c/machineTypes/f1-micro"
   * @param network name of the network you want the new instance to use. For example:
   * "global/networks/default" represents the network named "default", which is created
   * automatically for each project.
   * @param subnetwork name of the subnetwork you want the new instance to use. This value uses the
   * following format: "regions/{region}/subnetworks/{subnetwork_name}"
   * @return Instance object.
   */
  private static Instance createWithDisks(String project, String zone, String instanceName,
      Vector<AttachedDisk> disks, String machineType, String network, String subnetwork)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    try (InstancesClient instancesClient = InstancesClient.create()) {
      // Use the network interface provided in the networkName argument.
      NetworkInterface networkInterface;
      if (subnetwork != null) {
        networkInterface = NetworkInterface.newBuilder()
            .setName(network).setSubnetwork(subnetwork)
            .build();
      } else {
        networkInterface = NetworkInterface.newBuilder()
            .setName(network).build();
      }

      machineType = String.format("zones/%s/machineTypes/%s", zone, machineType);

      // Bind `instanceName`, `machineType`, `disk`, and `networkInterface` to an instance.
      Instance instanceResource =
          Instance.newBuilder()
              .setName(instanceName)
              .setMachineType(machineType)
              .addAllDisks(disks)
              .addNetworkInterfaces(networkInterface)
              .build();

      System.out.printf("Creating instance: %s at %s ", instanceName, zone);

      // Insert the instance in the specified project and zone.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(project)
          .setZone(zone)
          .setInstanceResource(instanceResource).build();

      OperationFuture<Operation, Operation> operation = instancesClient.insertAsync(
          insertInstanceRequest);

      // Wait for the operation to complete.
      Operation response = operation.get(3, TimeUnit.MINUTES);

      if (response.hasError()) {
        System.out.println("Instance creation failed ! ! " + response);
        return null;
      }
      System.out.println("Operation Status: " + response.getStatus());

      return instancesClient.get(project, zone, instanceName);
    }
  }

  /**
   * Create a new VM instance with custom image used as its boot disk.
   *
   * @param project project ID or project number of the Cloud project you want to use.
   * @param zone name of the zone to create the instance in. For example: "us-west3-b"
   * @param instanceName name of the new virtual machine (VM) instance.
   * @param customImage link to the custom image you want to use in the form of:
   * "projects/{project_name}/global/images/{image_name}"
   * @return Instance object.
   */
  public static Instance createFromCustomImage(String project, String zone, String instanceName,
      String customImage)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    String diskType = String.format("zones/%s/diskTypes/pd-standard", zone);
    Vector<AttachedDisk> disks = new Vector<>();
    disks.add(diskFromImage(diskType, 10, true, customImage));
    return createWithDisks(project, zone, instanceName, disks, "n1-standard-1",
        "global/networks/default", null);
  }

Node.js

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Node.js in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Node.js API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const customImageLink = 'projects/YOUR_PROJECT/global/images/YOUR_IMAGE_NAME';

const compute = require('@google-cloud/compute');

// Creates a new VM instance with custom image used as its boot disk.
async function createInstanceFromCustomImage() {
  const instancesClient = new compute.InstancesClient();

  const [response] = await instancesClient.insert({
    project: projectId,
    zone,
    instanceResource: {
      name: instanceName,
      disks: [
        {
          initializeParams: {
            diskSizeGb: '10',
            sourceImage: customImageLink,
            diskType: `zones/${zone}/diskTypes/pd-standard`,
          },
          autoDelete: true,
          boot: true,
          type: 'PERSISTENT',
        },
      ],
      machineType: `zones/${zone}/machineTypes/n1-standard-1`,
      networkInterfaces: [
        {
          name: 'global/networks/default',
        },
      ],
    },
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createInstanceFromCustomImage();

Python

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Python in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Python API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

from __future__ import annotations

import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1

def get_image_from_family(project: str, family: str) -> compute_v1.Image:
    """
    Retrieve the newest image that is part of a given family in a project.

    Args:
        project: project ID or project number of the Cloud project you want to get image from.
        family: name of the image family you want to get image from.

    Returns:
        An Image object.
    """
    image_client = compute_v1.ImagesClient()
    # List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details
    newest_image = image_client.get_from_family(project=project, family=family)
    return newest_image

def disk_from_image(
    disk_type: str,
    disk_size_gb: int,
    boot: bool,
    source_image: str,
    auto_delete: bool = True,
) -> compute_v1.AttachedDisk:
    """
    Create an AttachedDisk object to be used in VM instance creation. Uses an image as the
    source for the new disk.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        source_image: source image to use when creating this disk. You must have read access to this disk. This can be one
            of the publicly available images or an image from one of your projects.
            This value uses the following format: "projects/{project_name}/global/images/{image_name}"
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created using the specified image.
    """
    boot_disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.source_image = source_image
    initialize_params.disk_size_gb = disk_size_gb
    initialize_params.disk_type = disk_type
    boot_disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    boot_disk.auto_delete = auto_delete
    boot_disk.boot = boot
    return boot_disk

def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result

def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)

def create_from_custom_image(
    project_id: str, zone: str, instance_name: str, custom_image_link: str
) -> compute_v1.Instance:
    """
    Create a new VM instance with custom image used as its boot disk.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        custom_image_link: link to the custom image you want to use in the form of:
            "projects/{project_name}/global/images/{image_name}"

    Returns:
        Instance object.
    """
    disk_type = f"zones/{zone}/diskTypes/pd-standard"
    disks = [disk_from_image(disk_type, 10, True, custom_image_link, True)]
    instance = create_instance(project_id, zone, instance_name, disks)
    return instance

REST

Wenn Sie in der API eine VM mit einem benutzerdefinierten Image erstellen möchten, gehen Sie genauso vor wie beim Erstellen einer VM mit einem öffentlich verfügbaren Image.

Verwenden Sie zum Erstellen der VM aus einem benutzerdefinierten Image die Methode instances.insert.

POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances

{
   "machineType":"zones/MACHINE_TYPE_ZONE/machineTypes/MACHINE_TYPE",
   "name":"VM_NAME",

   "disks":[
      {
         "initializeParams":{
            "sourceImage":"projects/IMAGE_PROJECT/global/images/IMAGE"
         },
         "boot":true
      }
   ],

   "networkInterfaces":[
      {
         "network":"global/networks/NETWORK_NAME"
      }
   ],

   "shieldedInstanceConfig":{
      "enableSecureBoot":"ENABLE_SECURE_BOOT"
   }
}

Dabei gilt:

  • PROJECT_ID ist die ID des Projekts, in dem die VM erstellt werden soll.
  • ZONE ist die Zone, in der die VM erstellt werden soll.
  • MACHINE_TYPE_ZONE ist die Zone mit dem Maschinentyp, der für die neue VM verwendet werden soll.
  • MACHINE_TYPE legt einen vordefinierten oder benutzerdefinierten Maschinentyp für die neue VM fest.
  • VM_NAME ist der Name der neuen VM.
  • IMAGE_PROJECT ist der Name des Projekts, das das benutzerdefinierte Image enthält.
  • Für IMAGE oder IMAGE_FAMILY muss eine der folgenden Optionen angegeben werden:
    • IMAGE ist der Name Ihres benutzerdefinierten Images. Beispiel: "sourceImage": "projects/my-project-1234/global/images/my-debian-image-v2".
    • IMAGE_FAMILY legt die benutzerdefinierte Image-Familie fest, wenn Sie Ihre benutzerdefinierten Images als Teil einer benutzerdefinierten Image-Familie erstellt haben.

      Dies erstellt die VM aus dem aktuellen, nicht verworfenen Betriebssystem-Image in Ihrer benutzerdefinierten Image-Familie. Wenn Sie beispielsweise "sourceImage": "projects/my-project-1234/global/images/family/my-debian-family" angeben, legt Compute Engine eine VM aus der neuesten Version des Betriebssystem-Images in der benutzerdefinierten my-debian-family-Image-Familie an.

  • NETWORK_NAME: das VPC-Netzwerk, das Sie für die VM verwenden möchten. Sie können default angeben, um Ihr Standardnetzwerk zu verwenden.
  • ENABLE_SECURE_BOOT: (Optional) Wenn Sie ein Image ausgewählt haben, das Shielded VM-Features unterstützt, aktiviert Compute Engine standardmäßig das Virtual Trusted Platform Module (vTPM) und das Integritätsmonitoring. Compute Engine aktiviert nicht standardmäßig Secure Boot.

    Wenn Sie für enableSecureBoot den Wert true angeben, erstellt Compute Engine eine VM, bei der alle drei Shielded VM-Features aktiviert sind. Nachdem Compute Engine Ihre VM gestartet hat, müssen Sie die VM beenden, um Shielded VM-Optionen zu ändern.

VM-Instanz mit zusätzlichen Nicht-Bootlaufwerken erstellen

Console

  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu „VM-Instanzen“

  2. Wählen Sie Ihr Projekt aus und klicken Sie auf Weiter.

  3. Klicken Sie auf Instanz erstellen.

  4. Geben Sie einen Namen für Ihre VM an. Weitere Informationen finden Sie unter Namenskonvention für Ressourcen.

  5. Ändern Sie optional die Zone für diese VM. In Compute Engine wird die Liste der Zonen in jeder Region zufällig angeordnet, um die Verwendung in mehreren Zonen zu fördern.

  6. Wählen Sie eine Maschinenkonfiguration für Ihre VM aus.

  7. Klicken Sie im Abschnitt Bootlaufwerk auf Ändern und gehen Sie dann so vor:

    1. Wählen Sie auf dem Tab Öffentliche Images Folgendes aus:
      • Betriebssystem
      • Betriebssystemversion
      • Bootlaufwerktyp
      • Größe des Bootlaufwerks
    2. Optional: Klicken Sie für erweiterte Konfigurationsoptionen auf Erweiterte Konfiguration anzeigen.
    3. Klicken Sie auf Auswählen, um die Bootlaufwerksoptionen zu bestätigen.
  8. Wählen Sie im Bereich Firewall die Option HTTP-Traffic zulassen oder HTTPS-Traffic zulassen aus, damit die VM HTTP- oder HTTPS-Traffic empfangen kann. Wenn Sie eine dieser Optionen auswählen, fügt Compute Engine Ihrer VM ein Netzwerktag hinzu, das die Firewallregel mit der VM verknüpft. Anschließend erstellt Compute Engine die entsprechende Firewallregel für eingehenden Traffic, die den gesamten eingehenden Traffic über tcp:80 (HTTP) oder tcp:443 (HTTPS) zulässt.

  9. Wenn Sie Ihrer VM Nicht-Bootlaufwerke hinzufügen möchten, maximieren Sie den Abschnitt Erweiterte Optionen und gehen Sie dann so vor:

    1. Erweitern Sie den Abschnitt Laufwerke.
    2. Klicken Sie auf Neues Laufwerk hinzufügen und gehen Sie dann so vor:
      1. Geben Sie für das Laufwerk Name, Typ, Quelltyp und Größe an.
      2. Wählen Sie im Abschnitt Anhang-Einstellungen den Anhang-Modus des Laufwerks und die Löschregel aus. Weitere Informationen zum Hinzufügen neuer Laufwerke finden Sie unter Nichtflüchtigen Speicher zu Instanz hinzufügen.
      3. Klicken Sie auf Speichern.
  10. Klicken Sie zum Erstellen und Starten der VM auf Erstellen.

gcloud

  1. Aktivieren Sie Cloud Shell in der Google Cloud Console.

    Cloud Shell aktivieren

    Unten in der Google Cloud Console wird eine Cloud Shell-Sitzung gestartet und eine Eingabeaufforderung angezeigt. Cloud Shell ist eine Shell-Umgebung, in der das Google Cloud CLI bereits installiert ist und Werte für Ihr aktuelles Projekt bereits festgelegt sind. Das Initialisieren der Sitzung kann einige Sekunden dauern.

  2. Führen Sie den Befehl gcloud compute instances create aus, um eine VM mit zusätzlichen Nicht-Bootlaufwerken zu erstellen.

    Beim Erstellen einer VM können Sie bis zu 127 Nicht-Bootlaufwerke hinzufügen. Geben Sie das Flag --create-disk für jedes Nicht-Bootlaufwerk an, das Sie erstellen.

    Wenn Sie Nicht-Bootlaufwerke aus einem öffentlichen oder einem vorhandenen Image erstellen möchten, geben Sie im Flag --create-disk die Attribute image oder image-family und image-project an. Wenn Sie diese Attribute nicht angeben, wird ein leeres Laufwerk erstellt. Optional können Sie Attribute für das Laufwerk size und type einfügen. Fügen Sie das Attribut replica-zones hinzu, um regionale nichtflüchtige Speicher zu erstellen.

    gcloud compute instances create VM_NAME \
      --zone=ZONE \
      [--image=IMAGE | --image-family=IMAGE_FAMILY] \
      --image-project=IMAGE_PROJECT \
      --create-disk [image=DISK_IMAGE | image-family=DISK_IMAGE_FAMILY ], \
        image-project=DISK_IMAGE_PROJECT,size=SIZE_GB,type=DISK_TYPE \
      --create-disk=device_name=DISK_NAME, \
        replica-zones=^:^ZONE:REMOTE-ZONE,boot=false
    

    Dabei gilt:

    • VM_NAME ist der Name der neuen VM.
    • ZONE ist die Zone, in der die VM erstellt werden soll.
    • IMAGE oder IMAGE_FAMILY. Wählen Sie eine der folgenden Optionen aus:

      • IMAGE ist eine bestimmte Version eines öffentlichen Images.

        z. B. --image=debian-10-buster-v20200309.

      • IMAGE_FAMILY ist eine Image-Familie.

        Dadurch wird die VM aus dem neuesten nicht verworfenen Betriebssystem-Image erstellt. Wenn Sie beispielsweise --image-family=debian-10 angeben, legt Compute Engine eine VM aus der neuesten Version des Betriebssystem-Images in der Debian 10-Image-Familie an.

    • IMAGE_PROJECT ist das Projekt, das das Image enthält.

    • Ersetzen Sie für zusätzliche Laufwerke folgende Optionen:

      • Für DISK_IMAGE oder DISK_IMAGE_FAMILY muss eine der folgenden Optionen angegeben werden:
        • DISK_IMAGE ist der Name des Images, das Sie als Nicht-Bootlaufwerk verwenden möchten.
        • DISK_IMAGE_FAMILY ist eine Image-Familie, die als Nicht-Bootlaufwerk verwendet werden soll.
      • DISK_IMAGE_PROJECT ist ein Image-Projekt, zu dem das Laufwerk-Image gehört.
      • SIZE_GB (optional): die Größe des Nicht-Bootlaufwerks.
      • DISK_TYPE (optional): die vollständige oder partielle URL für den Typ des nichtflüchtigen Speichers.

        z. B. https://www.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/diskTypes/pd-ssd. Führen Sie den Befehl gcloud compute disk-types list aus, um die verfügbaren Laufwerkstypen aufzurufen.

      • DISK_NAME: Optional: der Laufwerkname, der dem Gastbetriebssystem nach dem Erstellen der VM angezeigt wird.

      • REMOTE_ZONE: Zone, in die das Laufwerk repliziert werden soll

      Bei leeren Laufwerken geben Sie die Parameter DISK_IMAGE, DISK_IMAGE_FAMILY oder DISK_IMAGE_PROJECT nicht an.

      Bei zonalen Laufwerken geben Sie nicht Laufwerksattribut replica-zones an.

Terraform

Zum Generieren des Terraform-Codes können Sie die Komponente Entsprechender Code in der Google Cloud Console verwenden.
  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu Seite „VM-Instanzen“

  2. Klicken Sie auf Instanz erstellen.
  3. Geben Sie die gewünschten Parameter an.
  4. Klicken Sie oben oder unten auf der Seite auf Entsprechender Code und dann auf den Tab Terraform, um den Terraform-Code aufzurufen.

Einfach loslegen (Go)

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Go in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Go API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "google.golang.org/genproto/googleapis/cloud/compute/v1"
	"google.golang.org/protobuf/proto"
)

// createWithAdditionalDisk create a new VM instance with Debian 10 operating system and a 11 GB additional empty disk.
func createWithAdditionalDisk(w io.Writer, projectID, zone, instanceName string) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	imagesClient, err := compute.NewImagesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewImagesRESTClient: %w", err)
	}
	defer imagesClient.Close()

	// List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details.
	newestDebianReq := &computepb.GetFromFamilyImageRequest{
		Project: "debian-cloud",
		Family:  "debian-10",
	}
	newestDebian, err := imagesClient.GetFromFamily(ctx, newestDebianReq)
	if err != nil {
		return fmt.Errorf("unable to get image from family: %w", err)
	}

	req := &computepb.InsertInstanceRequest{
		Project: projectID,
		Zone:    zone,
		InstanceResource: &computepb.Instance{
			Name: proto.String(instanceName),
			Disks: []*computepb.AttachedDisk{
				{
					InitializeParams: &computepb.AttachedDiskInitializeParams{
						DiskSizeGb:  proto.Int64(10),
						SourceImage: newestDebian.SelfLink,
						DiskType:    proto.String(fmt.Sprintf("zones/%s/diskTypes/pd-standard", zone)),
					},
					AutoDelete: proto.Bool(true),
					Boot:       proto.Bool(true),
					Type:       proto.String(computepb.AttachedDisk_PERSISTENT.String()),
				},
				{
					InitializeParams: &computepb.AttachedDiskInitializeParams{
						DiskSizeGb: proto.Int64(11),
						DiskType:   proto.String(fmt.Sprintf("zones/%s/diskTypes/pd-standard", zone)),
					},
					AutoDelete: proto.Bool(true),
					Boot:       proto.Bool(false),
					Type:       proto.String(computepb.AttachedDisk_PERSISTENT.String()),
				},
			},
			MachineType: proto.String(fmt.Sprintf("zones/%s/machineTypes/n1-standard-1", zone)),
			NetworkInterfaces: []*computepb.NetworkInterface{
				{
					Name: proto.String("global/networks/default"),
				},
			},
		},
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Java in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Java API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


import com.google.api.gax.longrunning.OperationFuture;
import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.AttachedDisk.Type;
import com.google.cloud.compute.v1.AttachedDiskInitializeParams;
import com.google.cloud.compute.v1.Image;
import com.google.cloud.compute.v1.ImagesClient;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.Vector;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateInstancesAdvanced {

  /**
   * Create an AttachedDisk object to be used in VM instance creation. Uses an image as the source
   * for the new disk.
   *
   * @param diskType the type of disk you want to create. This value uses the following format:
   * "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)". For example:
   * "zones/us-west3-b/diskTypes/pd-ssd"
   * @param diskSizeGb size of the new disk in gigabytes
   * @param boot boolean flag indicating whether this disk should be used as a boot disk of an
   * instance
   * @param sourceImage source image to use when creating this disk. You must have read access to
   * this disk. This can be one of the publicly available images or an image from one of your
   * projects. This value uses the following format:
   * "projects/{project_name}/global/images/{image_name}"
   * @return AttachedDisk object configured to be created using the specified image.
   */
  private static AttachedDisk diskFromImage(String diskType, int diskSizeGb, boolean boot,
      String sourceImage) {
    AttachedDisk disk =
        AttachedDisk.newBuilder()
            .setBoot(boot)
            // Remember to set auto_delete to True if you want the disk to be deleted when
            // you delete your VM instance.
            .setAutoDelete(true)
            .setType(Type.PERSISTENT.toString())
            .setInitializeParams(
                AttachedDiskInitializeParams.newBuilder()
                    .setSourceImage(sourceImage)
                    .setDiskSizeGb(diskSizeGb)
                    .setDiskType(diskType)
                    .build())
            .build();
    return disk;
  }

  /**
   * Create an AttachedDisk object to be used in VM instance creation. The created disk contains no
   * data and requires formatting before it can be used.
   *
   * @param diskType the type of disk you want to create. This value uses the following format:
   * "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)". For example:
   * "zones/us-west3-b/diskTypes/pd-ssd"
   * @param diskSizeGb size of the new disk in gigabytes
   * @return AttachedDisk object configured to be created as an empty disk.
   */
  private static AttachedDisk emptyDisk(String diskType, int diskSizeGb) {
    AttachedDisk disk =
        AttachedDisk.newBuilder()
            .setBoot(false)
            // Remember to set auto_delete to True if you want the disk to be deleted when
            // you delete your VM instance.
            .setAutoDelete(true)
            .setType(Type.PERSISTENT.toString())
            .setInitializeParams(
                AttachedDiskInitializeParams.newBuilder()
                    .setDiskSizeGb(diskSizeGb)
                    .setDiskType(diskType)
                    .build())
            .build();
    return disk;
  }

  /**
   * Send an instance creation request to the Compute Engine API and wait for it to complete.
   *
   * @param project project ID or project number of the Cloud project you want to use.
   * @param zone name of the zone to create the instance in. For example: "us-west3-b"
   * @param instanceName name of the new virtual machine (VM) instance.
   * @param disks a list of compute_v1.AttachedDisk objects describing the disks you want to attach
   * to your new instance.
   * @param machineType machine type of the VM being created. This value uses the following format:
   * "zones/{zone}/machineTypes/{type_name}".
   * For example: "zones/europe-west3-c/machineTypes/f1-micro"
   * @param network name of the network you want the new instance to use. For example:
   * "global/networks/default" represents the network named "default", which is created
   * automatically for each project.
   * @param subnetwork name of the subnetwork you want the new instance to use. This value uses the
   * following format: "regions/{region}/subnetworks/{subnetwork_name}"
   * @return Instance object.
   */
  private static Instance createWithDisks(String project, String zone, String instanceName,
      Vector<AttachedDisk> disks, String machineType, String network, String subnetwork)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    try (InstancesClient instancesClient = InstancesClient.create()) {
      // Use the network interface provided in the networkName argument.
      NetworkInterface networkInterface;
      if (subnetwork != null) {
        networkInterface = NetworkInterface.newBuilder()
            .setName(network).setSubnetwork(subnetwork)
            .build();
      } else {
        networkInterface = NetworkInterface.newBuilder()
            .setName(network).build();
      }

      machineType = String.format("zones/%s/machineTypes/%s", zone, machineType);

      // Bind `instanceName`, `machineType`, `disk`, and `networkInterface` to an instance.
      Instance instanceResource =
          Instance.newBuilder()
              .setName(instanceName)
              .setMachineType(machineType)
              .addAllDisks(disks)
              .addNetworkInterfaces(networkInterface)
              .build();

      System.out.printf("Creating instance: %s at %s ", instanceName, zone);

      // Insert the instance in the specified project and zone.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(project)
          .setZone(zone)
          .setInstanceResource(instanceResource).build();

      OperationFuture<Operation, Operation> operation = instancesClient.insertAsync(
          insertInstanceRequest);

      // Wait for the operation to complete.
      Operation response = operation.get(3, TimeUnit.MINUTES);

      if (response.hasError()) {
        System.out.println("Instance creation failed ! ! " + response);
        return null;
      }
      System.out.println("Operation Status: " + response.getStatus());

      return instancesClient.get(project, zone, instanceName);
    }
  }

  /**
   * Create a new VM instance with Debian 10 operating system and a 11 GB additional empty disk.
   *
   * @param project project ID or project number of the Cloud project you want to use.
   * @param zone name of the zone to create the instance in. For example: "us-west3-b"
   * @param instanceName name of the new virtual machine (VM) instance.
   * @return Instance object.
   */
  public static Instance createWithAdditionalDisk(String project, String zone, String instanceName)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    try (ImagesClient imagesClient = ImagesClient.create()) {
      // List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details
      Image image = imagesClient.getFromFamily("debian-cloud", "debian-10");
      String diskType = String.format("zones/%s/diskTypes/pd-standard", zone);
      Vector<AttachedDisk> disks = new Vector<>();
      disks.add(diskFromImage(diskType, 10, true, image.getSelfLink()));
      disks.add(emptyDisk(diskType, 11));
      return createWithDisks(project, zone, instanceName, disks, "n1-standard-1",
          "global/networks/default", null);
    }
  }

Node.js

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Node.js in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Node.js API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';

const compute = require('@google-cloud/compute');

// Create a new VM instance with Debian 10 operating system and a 11 GB additional empty disk.
async function createWithAdditionalDisk() {
  const instancesClient = new compute.InstancesClient();
  const imagesClient = new compute.ImagesClient();

  // List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details.
  const [newestDebian] = await imagesClient.getFromFamily({
    project: 'debian-cloud',
    family: 'debian-10',
  });

  const [response] = await instancesClient.insert({
    project: projectId,
    zone,
    instanceResource: {
      name: instanceName,
      disks: [
        {
          initializeParams: {
            diskSizeGb: '10',
            sourceImage: newestDebian.selfLink,
            diskType: `zones/${zone}/diskTypes/pd-standard`,
          },
          autoDelete: true,
          boot: true,
          type: 'PERSISTENT',
        },
        {
          initializeParams: {
            diskSizeGb: '11',
            diskType: `zones/${zone}/diskTypes/pd-standard`,
          },
          autoDelete: true,
          boot: false,
          type: 'PERSISTENT',
        },
      ],
      machineType: `zones/${zone}/machineTypes/n1-standard-1`,
      networkInterfaces: [
        {
          name: 'global/networks/default',
        },
      ],
    },
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createWithAdditionalDisk();

Python

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Python in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Python API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

from __future__ import annotations

import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1

def get_image_from_family(project: str, family: str) -> compute_v1.Image:
    """
    Retrieve the newest image that is part of a given family in a project.

    Args:
        project: project ID or project number of the Cloud project you want to get image from.
        family: name of the image family you want to get image from.

    Returns:
        An Image object.
    """
    image_client = compute_v1.ImagesClient()
    # List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details
    newest_image = image_client.get_from_family(project=project, family=family)
    return newest_image

def disk_from_image(
    disk_type: str,
    disk_size_gb: int,
    boot: bool,
    source_image: str,
    auto_delete: bool = True,
) -> compute_v1.AttachedDisk:
    """
    Create an AttachedDisk object to be used in VM instance creation. Uses an image as the
    source for the new disk.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        source_image: source image to use when creating this disk. You must have read access to this disk. This can be one
            of the publicly available images or an image from one of your projects.
            This value uses the following format: "projects/{project_name}/global/images/{image_name}"
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created using the specified image.
    """
    boot_disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.source_image = source_image
    initialize_params.disk_size_gb = disk_size_gb
    initialize_params.disk_type = disk_type
    boot_disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    boot_disk.auto_delete = auto_delete
    boot_disk.boot = boot
    return boot_disk

def empty_disk(
    disk_type: str, disk_size_gb: int, boot: bool = False, auto_delete: bool = True
) -> compute_v1.AttachedDisk():
    """
    Create an AttachedDisk object to be used in VM instance creation. The created disk contains
    no data and requires formatting before it can be used.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created as an empty disk.
    """
    disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.disk_type = disk_type
    initialize_params.disk_size_gb = disk_size_gb
    disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    disk.auto_delete = auto_delete
    disk.boot = boot
    return disk

def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result

def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)

def create_with_additional_disk(
    project_id: str, zone: str, instance_name: str
) -> compute_v1.Instance:
    """
    Create a new VM instance with Debian 10 operating system on a 20 GB disk
    and a 25 GB additional empty disk.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.

    Returns:
        Instance object.
    """
    newest_debian = get_image_from_family(project="debian-cloud", family="debian-10")
    disk_type = f"zones/{zone}/diskTypes/pd-standard"
    disks = [
        disk_from_image(disk_type, 20, True, newest_debian.self_link),
        empty_disk(disk_type, 25),
    ]
    instance = create_instance(project_id, zone, instance_name, disks)
    return instance

REST

Sie können beim Erstellen einer VM-Instanz bis zu 127 Nicht-Bootlaufwerke erstellen. Geben Sie dazu für jedes zusätzliche Laufwerk das Attribut initializeParams an. Sie können zusätzliche Laufwerke mit einem öffentlichen oder mit einem privaten Image erstellen. Wenn Sie ein leeres Laufwerk erstellen möchten, geben Sie für den Eintrag initializeParams keinen sourceImage-Wert an. Fügen Sie das Laufwerkattribut replicaZones hinzu, um regionale nichtflüchtige Speicher zu erstellen.

POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances

{
   "machineType":"zones/MACHINE_TYPE_ZONE/machineTypes/MACHINE_TYPE",
   "name":"VM_NAME",

   "disks":[
      {
         "initializeParams":{
            "sourceImage":"projects/IMAGE_PROJECT/global/images/IMAGE"
         },
         "boot":true
      },
      {
         "initializeParams":{
            "diskSizeGb":"SIZE_GB",
            "sourceImage":"projects/DISK_IMAGE_PROJECT/global/images/DISK_IMAGE",
            "diskType":"DISK_TYPE"
         }
      },
      {
         "initializeParams":{
            "diskSizeGb":"SIZE_GB",
            "diskType":"DISK_TYPE"
         },
      },
      {
         "boot": false,
         "deviceName":"DISK_NAME",
         "initializeParams": {
            "diskType": "DISK_TYPE",
            "replicaZones": [
               "projects/PROJECT_ID/zones/ZONE",
               "projects/PROJECT_ID/zones/REMOTE_ZONE"
            ]
         }
      }
   ],

   "networkInterfaces":[
      {
         "network":"global/networks/NETWORK_NAME"
      }
   ],

   "shieldedInstanceConfig":{
      "enableSecureBoot":"ENABLE_SECURE_BOOT"
   }
}

Dabei gilt:

  • PROJECT_ID ist die ID des Projekts, in dem die VM erstellt werden soll.
  • ZONE ist die Zone, in der die VM erstellt werden soll.
  • MACHINE_TYPE_ZONE ist die Zone mit dem Maschinentyp, der für die neue VM verwendet werden soll.
  • MACHINE_TYPE legt einen vordefinierten oder benutzerdefinierten Maschinentyp für die neue VM fest.
  • VM_NAME ist der Name der neuen VM.
  • IMAGE_PROJECT: Projekt, das das Image enthält
    Wenn Sie beispielsweise debian-10 als Image-Familie angeben, geben Sie debian-cloud als Image-Projekt an.
  • IMAGE or IMAGE_FAMILY: Wählen Sie eine der folgenden Optionen aus:
    • IMAGE: eine bestimmte Version eines öffentlichen Images
      Beispiel: "sourceImage": "projects/debian-cloud/global/images/debian-10-buster-v20200309"
    • IMAGE_FAMILY: eine Image-Familie
      . Dadurch wird die VM aus dem neuesten nicht verworfenen Betriebssystem-Image erstellt. Wenn Sie beispielsweise "sourceImage": "projects/debian-cloud/global/images/family/debian-10" angeben, legt Compute Engine eine VM aus der neuesten Version des Betriebssystem-Images in der Debian 10-Image-Familie an.
  • Ersetzen Sie für zusätzliche Laufwerke folgende Optionen:
    • SIZE_GB ist die Laufwerkgröße.
    • DISK_IMAGE oder
    • DISK_IMAGE_FAMILY: Geben Sie entweder ein Quell-Image oder eine Image-Familie für das Nicht-Bootlaufwerk an:
      • DISK_IMAGE ist der Name des Images, das Sie als Nicht-Bootlaufwerk verwenden möchten, z. B. "sourceImage": "projects/DISK_IMAGE_PROJECT/global/images/DISK_IMAGE".
      • DISK_IMAGE_FAMILY: Eine Image-Familie, die als Nicht-Bootlaufwerk verwendet werden soll, z. B. "sourceImage": "projects/DISK_IMAGE_PROJECT/global/images/family/DISK_IMAGE_FAMILY".
    • DISK_TYPE ist die vollständige oder partielle URL für den Typ des nichtflüchtigen Speichers. Beispiel: https://www.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/diskTypes/pd-ssd
    • DISK_NAME: Optional. Der Laufwerkname, der dem Gastbetriebssystem nach dem Erstellen der VM angezeigt wird.
    • REMOTE_ZONE: Zone, in die das regionale Laufwerk repliziert werden soll
    • Bei leeren Laufwerken geben Sie nicht Attribut sourceImage nicht an. Bei zonalen Laufwerken geben Sie nicht Attribut replicaZones nicht an.
  • NETWORK_NAME: das VPC-Netzwerk, das Sie für die VM verwenden möchten. Sie können default angeben, um Ihr Standardnetzwerk zu verwenden.
  • ENABLE_SECURE_BOOT: (Optional) Wenn Sie ein Image ausgewählt haben, das Shielded VM-Features unterstützt, aktiviert Compute Engine standardmäßig das Virtual Trusted Platform Module (vTPM) und das Integritätsmonitoring. Compute Engine aktiviert nicht standardmäßig Secure Boot.

    Wenn Sie für enableSecureBoot den Wert true angeben, erstellt Compute Engine eine VM, bei der alle drei Shielded VM-Features aktiviert sind. Nachdem Compute Engine Ihre VM gestartet hat, müssen Sie die VM beenden, um Shielded VM-Optionen zu ändern.

Formatieren und stellen Sie die Laufwerke bereit, bevor Sie sie verwenden.

VM-Instanz aus einem freigegebenen Image erstellen

Wenn ein anderer Nutzer ein Image für Sie freigegeben hat, können Sie dieses Image zum Erstellen einer VM verwenden.

Console

  1. Rufen Sie in der Google Cloud Console die Seite Instanz erstellen auf.

    Zur Seite „Instanz erstellen“

  2. Geben Sie einen Namen für Ihre VM an. Weitere Informationen finden Sie unter Konvention für Ressourcennamen.
  3. Ändern Sie optional die Zone für diese VM. In Compute Engine wird die Liste der Zonen in jeder Region zufällig angeordnet, um die Verwendung in mehreren Zonen zu fördern.
  4. Wählen Sie eine Maschinenkonfiguration für Ihre VM aus.
  5. Klicken Sie im Abschnitt Bootlaufwerk auf Ändern, um das Bootlaufwerk zu konfigurieren. Gehen Sie dann so vor:
    1. Wählen Sie den Tab Benutzerdefinierte Images aus.
    2. Klicken Sie zum Auswählen des Image-Projekts auf Projekt auswählen und gehen Sie dann so vor:
      1. Wählen Sie das Projekt aus, das das Image enthält.
      2. Klicken Sie auf Öffnen.
    3. Klicken Sie in der Liste Image auf das Image, das Sie importieren möchten.
    4. Wählen Sie den Typ und die Größe des Bootlaufwerks aus.
    5. Klicken Sie auf Auswählen, um die Bootlaufwerksoptionen zu bestätigen.
  6. Wählen Sie im Abschnitt Firewall die Option HTTP-Traffic zulassen oder HTTPS-Traffic zulassen aus, um HTTP- oder HTTPS-Traffic zur VM zuzulassen.

    In der Google Cloud Console wird der VM ein Netzwerk-Tag hinzugefügt und es werden entsprechende Firewallregeln für eingehenden Traffic erstellt, die den gesamten eingehenden Traffic über tcp:80 (HTTP) oder tcp:443 (HTTPS) zulassen. Das Netzwerk-Tag ordnet die Firewallregel der VM zu. Weitere Informationen finden Sie unter Übersicht über Firewallregeln in der Cloud Next Generation Firewall-Dokumentation.

  7. Klicken Sie zum Starten und Erstellen einer VM auf Erstellen.

gcloud

  1. Aktivieren Sie Cloud Shell in der Google Cloud Console.

    Cloud Shell aktivieren

    Unten in der Google Cloud Console wird eine Cloud Shell-Sitzung gestartet und eine Eingabeaufforderung angezeigt. Cloud Shell ist eine Shell-Umgebung, in der das Google Cloud CLI bereits installiert ist und Werte für Ihr aktuelles Projekt bereits festgelegt sind. Das Initialisieren der Sitzung kann einige Sekunden dauern.

  2. Sie erstellen eine VM mit dem gcloud compute instances create command und verwenden die Flags --image und --image-project, um den Image-Namen und das Projekt anzugeben, in dem sich das Image befindet:

    gcloud compute instances create VM_NAME \
            --image=IMAGE \
            --image-project=IMAGE_PROJECT
        

    Dabei gilt:

    • VM_NAME ist der Name der neuen VM.
    • IMAGE ist der Name des Images.
    • IMAGE_PROJECT ist das Projekt, zu dem das Image gehört.

    Wenn der Befehl erfolgreich ausgeführt wurde, gibt gcloud die Attribute der neuen VM zurück:

        Created [https://compute.googleapis.com/compute/v1/projects/myproject/zones/us-central1-b/instances/example-instance].
        NAME                 ZONE           MACHINE_TYPE   PREEMPTIBLE  INTERNAL_IP  EXTERNAL_IP    STATUS
        example-instance     us-central1-b  e2-standard-2               10.240.0.4   104.198.53.60  RUNNING

Terraform

Wenn Sie in Terraform eine VM mit einem freigegebenen Image erstellen möchten, gehen Sie genauso vor wie beim Erstellen einer VM mit einem öffentlich verfügbaren Image.

  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu Seite „VM-Instanzen“

  2. Klicken Sie auf Instanz erstellen.
  3. Geben Sie die gewünschten Parameter an.
  4. Klicken Sie oben oder unten auf der Seite auf Entsprechender Code und dann auf den Tab Terraform, um den Terraform-Code aufzurufen.

REST

Wenn Sie in der API eine VM mit einem freigegebenen Image erstellen möchten, gehen Sie genauso vor wie beim Erstellen einer VM mit einem öffentlich verfügbaren Image. Verwenden Sie zum Erstellen der VM aus einem freigegebenen Image die Methode instances.insert.

POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances

{
   "machineType":"zones/MACHINE_TYPE_ZONE/machineTypes/MACHINE_TYPE",
   "name":"VM_NAME",

   "disks":[
      {
         "initializeParams":{
            "sourceImage":"projects/IMAGE_PROJECT/global/images/IMAGE"
         },
         "boot":true
      }
   ],

   "networkInterfaces":[
      {
         "network":"global/networks/NETWORK_NAME"
      }
   ],

   "shieldedInstanceConfig":{
      "enableSecureBoot":"ENABLE_SECURE_BOOT"
   }
}

Dabei gilt:

  • PROJECT_ID ist die ID des Projekts, in dem die VM erstellt werden soll.
  • ZONE ist die Zone, in der die VM erstellt werden soll.
  • MACHINE_TYPE_ZONE ist die Zone mit dem Maschinentyp, der für die neue VM verwendet werden soll.
  • MACHINE_TYPE legt einen vordefinierten oder benutzerdefinierten Maschinentyp für die neue VM fest.
  • VM_NAME ist der Name der neuen VM.
  • IMAGE_PROJECT ist der Name des Projekts, das das freigegebene Image enthält.
  • Für IMAGE oder IMAGE_FAMILY muss eine der folgenden Optionen angegeben werden:
    • IMAGE ist der Name des freigegebenen Images. Beispiel: "sourceImage": "projects/finance-project-1234/global/images/finance-debian-image-v2".
    • IMAGE_FAMILY legt die benutzerdefinierte Image-Familie fest, wenn das freigegebene Image als Teil einer benutzerdefinierten Image-Familie erstellt wird.

      Dies erstellt die VM aus dem aktuellen, nicht verworfenen Betriebssystem-Image in Ihrer benutzerdefinierten Image-Familie. Wenn Sie beispielsweise "sourceImage": "projects/finance-project-1234/global/images/family/finance-debian-family" angeben, legt Compute Engine eine VM aus der neuesten Version des Betriebssystem-Images in der benutzerdefinierten finance-debian-family-Image-Familie an.

  • NETWORK_NAME: das VPC-Netzwerk, das Sie für die VM verwenden möchten. Sie können default angeben, um Ihr Standardnetzwerk zu verwenden.
  • ENABLE_SECURE_BOOT: (Optional) Wenn Sie ein Image ausgewählt haben, das Shielded VM-Features unterstützt, aktiviert Compute Engine standardmäßig das Virtual Trusted Platform Module (vTPM) und das Integritätsmonitoring. Compute Engine aktiviert nicht standardmäßig Secure Boot.

    Wenn Sie für enableSecureBoot den Wert true angeben, erstellt Compute Engine eine VM, bei der alle drei Shielded VM-Features aktiviert sind. Nachdem Compute Engine Ihre VM gestartet hat, müssen Sie die VM beenden, um Shielded VM-Optionen zu ändern.

VM aus einem Snapshot erstellen

Sie haben folgende Möglichkeiten, eine neue VM aus einem Snapshot zu erstellen:

Wenn Sie schnell mehr als eine VM mit demselben Bootlaufwerk erstellen möchten, erstellen Sie ein benutzerdefiniertes Image und erstellen Sie dann VMs aus diesem Image, statt einen Snapshot zu verwenden.

VM-Instanz aus einem Container-Image erstellen

Wenn Sie einen Container auf einer Compute Engine-VM bereitstellen und starten möchten, geben Sie beim Erstellen der VM einen Container-Image-Namen und optionale Konfigurationsparameter an. Compute Engine erstellt die VM mit der neuesten Version des öffentlichen Images für Container-Optimized OS, auf dem Docker installiert ist. Dann startet Compute Engine den Container beim Start der VM. Weitere Informationen dazu finden Sie unter Container auf VMs bereitstellen.

Zum Erstellen einer VM aus einem Container-Image müssen Sie die Google Cloud Console oder gcloud verwenden.

Console

  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu „VM-Instanzen“

  2. Wählen Sie Ihr Projekt aus und klicken Sie auf Weiter.

  3. Klicken Sie auf Instanz erstellen.

  4. Geben Sie einen Namen für Ihre VM an. Weitere Informationen finden Sie unter Namenskonvention für Ressourcen.

  5. Klicken Sie im Abschnitt Container auf Container bereitstellen.

    1. Geben Sie das zu verwendende Container-Image an. Beispiel:

      • So wählen Sie ein NGINX 1.12-Container-Image aus Cloud Launcher aus:

        gcr.io/cloud-marketplace/google/nginx1:1.12

      • Wenn Sie ein Apache-Container-Image von Docker Hub bereitstellen möchten, geben Sie immer den vollständigen Docker-Image-Namen an:

        docker.io/httpd:2.4

    2. Optional: Klicken Sie auf Erweiterte Containeroptionen. Weitere Informationen finden Sie unter Optionen zum Ausführen von Containern konfigurieren.

  6. Klicken Sie zum Erstellen der VM, zum Starten der VM und zum Starten des Containers auf Erstellen.

gcloud

  1. Aktivieren Sie Cloud Shell in der Google Cloud Console.

    Cloud Shell aktivieren

    Unten in der Google Cloud Console wird eine Cloud Shell-Sitzung gestartet und eine Eingabeaufforderung angezeigt. Cloud Shell ist eine Shell-Umgebung, in der das Google Cloud CLI bereits installiert ist und Werte für Ihr aktuelles Projekt bereits festgelegt sind. Das Initialisieren der Sitzung kann einige Sekunden dauern.

  2. Führen Sie den Befehl gcloud compute instances create-with-container aus:

    gcloud compute instances create-with-container VM_NAME \
      --container-image=CONTAINER_IMAGE

    Dabei gilt:

    • VM_NAME ist der Name der neuen VM.
    • CONTAINER_IMAGE ist der Name des Container-Images.

    Mit dem folgenden Befehl wird beispielsweise eine VM mit dem Namen nginx-vm erstellt, die das Container-Image startet und ausführt:

    gcr.io/cloud-marketplace/google/nginx1:1.12

    gcloud compute instances create-with-container nginx-vm \
      --container-image=gcr.io/cloud-marketplace/google/nginx1:1.12

    Wenn Sie ein Apache-Container-Image von Docker Hub bereitstellen möchten, geben Sie immer den vollständigen Docker-Image-Namen an:

    docker.io/httpd:2.4

VM-Instanz in einem bestimmten Subnetz erstellen

Standardmäßig erstellt Google Cloud für jedes Projekt ein VPC-Netzwerk im automatischen Modus mit dem Namen default. Möchten Sie ein anderes Netzwerk bzw. Subnetz verwenden, das Sie manuell in einem VPC-Netzwerk im automatischen oder im benutzerdefinierten Modus erstellt haben, müssen Sie das Subnetz beim Erstellen der VM angeben.

Beachten Sie beim Erstellen einer VM in einem Subnetz folgende Regeln:

  • Wenn Sie kein Netzwerk oder Subnetz angeben, verwendet Compute Engine das Standard-VPC-Netzwerk und das automatische Subnetz, das sich in derselben Region wie die VM befindet.
  • Wenn Sie kein Netzwerk angeben, leitet Compute Engine das Netzwerk aus dem angegebenen Subnetz ab.
  • Wenn Sie ein Netzwerk angeben, müssen Sie ein Subnetz angeben, das zu demselben Netzwerk gehören muss. Andernfalls schlägt die VM-Erstellung fehl.

Console

  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu „VM-Instanzen“

  2. Wählen Sie Ihr Projekt aus und klicken Sie auf Weiter.

  3. Klicken Sie auf Instanz erstellen.

  4. Geben Sie einen Namen für Ihre VM an. Weitere Informationen finden Sie unter Namenskonvention für Ressourcen.

  5. Ändern Sie optional die Zone für diese VM. In Compute Engine wird die Liste der Zonen in jeder Region zufällig angeordnet, um die Verwendung in mehreren Zonen zu fördern.

  6. Wählen Sie im Bereich Firewall die Option HTTP-Traffic zulassen oder HTTPS-Traffic zulassen aus, damit die VM HTTP- oder HTTPS-Traffic empfangen kann.

    In der Google Cloud Console werden der VM ein Netzwerk-Tag hinzugefügt und entsprechende Firewallregeln für eingehenden Traffic erstellt, die den gesamten eingehenden Traffic über tcp:80 (HTTP) oder tcp:443 (HTTPS) zulassen. Das Netzwerk-Tag ordnet die Firewallregel der VM zu. Weitere Informationen finden Sie unter Übersicht über Firewallregeln in der Cloud NGFW-Dokumentation.

  7. Maximieren Sie den Bereich Erweiterte Optionen.

    1. Maximieren Sie den Bereich Netzwerk.
    2. Geben Sie unter Netzwerkschnittstellen die Netzwerkdetails an:
      1. Wählen Sie im Feld Netzwerk das VPC-Netzwerk aus, welches das von Ihnen erstellte Subnetz enthält.
      2. Wählen Sie dann im Feld Subnetz das Subnetz für die zu verwendende VM aus.
      3. Klicken Sie auf Fertig.
  8. Klicken Sie zum Erstellen und Starten der VM auf Erstellen.

gcloud

  1. Aktivieren Sie Cloud Shell in der Google Cloud Console.

    Cloud Shell aktivieren

    Unten in der Google Cloud Console wird eine Cloud Shell-Sitzung gestartet und eine Eingabeaufforderung angezeigt. Cloud Shell ist eine Shell-Umgebung, in der das Google Cloud CLI bereits installiert ist und Werte für Ihr aktuelles Projekt bereits festgelegt sind. Das Initialisieren der Sitzung kann einige Sekunden dauern.

  2. Falls Sie das Google Cloud CLI verwenden, folgen Sie derselben Anleitung wie beim Erstellen einer VM aus einem Image oder einem Snapshot und fügen Sie die Flags --subnet=SUBNET_NAME und --zone=ZONE hinzu, wenn Sie den Befehl gcloud compute instances create ausführen:

    gcloud compute instances create VM_NAME \
      --network=NETWORK_NAME \
      --subnet=SUBNET_NAME \
      --zone=ZONE

    Dabei gilt:

    • VM_NAME ist der Name der VM.
    • NETWORK_NAME (optional) ist der Name des Netzwerks.
    • SUBNET_NAME ist der Name des Subnetzes.

      Mit dem folgenden Befehl rufen Sie eine Liste der Subnetze im Netzwerk auf: gcloud compute networks subnets list.

    • ZONE ist die Zone, in der die VM erstellt wird, z. B. europe-west1-b.

      Die Region der VM wird aus der Zone abgeleitet.

Terraform

Zum Erstellen einer VM in einem bestimmten Subnetz können Sie die Ressource google_compute_instance verwenden.


# Create a VM in a custom VPC network and subnet

resource "google_compute_instance" "custom_subnet" {
  name         = "my-vm-instance"
  tags         = ["allow-ssh"]
  zone         = "europe-west1-b"
  machine_type = "e2-small"
  network_interface {
    network    = google_compute_network.custom.id
    subnetwork = google_compute_subnetwork.custom.id
  }
  boot_disk {
    initialize_params {
      image = "debian-cloud/debian-10"
    }
  }
}

Informationen zum Anwenden oder Entfernen einer Terraform-Konfiguration finden Sie unter Grundlegende Terraform-Befehle.

Wenn Sie in Terraform eine VM mit einem freigegebenen Image erstellen möchten, gehen Sie genauso vor wie beim Erstellen einer VM mit einem öffentlich verfügbaren Image.

  1. Rufen Sie in der Google Cloud Console die Seite VM-Instanzen auf.

    Zu Seite „VM-Instanzen“

  2. Klicken Sie auf Instanz erstellen.
  3. Geben Sie die gewünschten Parameter an.
  4. Klicken Sie oben oder unten auf der Seite auf Entsprechender Code und dann auf den Tab Terraform, um den Terraform-Code aufzurufen.

Einfach loslegen (Go)

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Go in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Go API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "google.golang.org/genproto/googleapis/cloud/compute/v1"
	"google.golang.org/protobuf/proto"
)

// createInstanceWithSubnet creates a new VM instance with Debian 10 operating system in specified network and subnetwork.
func createInstanceWithSubnet(w io.Writer, projectID, zone, instanceName, networkLink, subnetworkLink string) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// networkLink := "global/networks/default"
	// subnetworkLink := "regions/region/subnetworks/subnetwork_name"

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	imagesClient, err := compute.NewImagesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewImagesRESTClient: %w", err)
	}
	defer imagesClient.Close()

	// List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details.
	newestDebianReq := &computepb.GetFromFamilyImageRequest{
		Project: "debian-cloud",
		Family:  "debian-10",
	}
	newestDebian, err := imagesClient.GetFromFamily(ctx, newestDebianReq)
	if err != nil {
		return fmt.Errorf("unable to get image from family: %w", err)
	}

	req := &computepb.InsertInstanceRequest{
		Project: projectID,
		Zone:    zone,
		InstanceResource: &computepb.Instance{
			Name: proto.String(instanceName),
			Disks: []*computepb.AttachedDisk{
				{
					InitializeParams: &computepb.AttachedDiskInitializeParams{
						DiskSizeGb:  proto.Int64(10),
						SourceImage: newestDebian.SelfLink,
						DiskType:    proto.String(fmt.Sprintf("zones/%s/diskTypes/pd-standard", zone)),
					},
					AutoDelete: proto.Bool(true),
					Boot:       proto.Bool(true),
					Type:       proto.String(computepb.AttachedDisk_PERSISTENT.String()),
				},
			},
			MachineType: proto.String(fmt.Sprintf("zones/%s/machineTypes/n1-standard-1", zone)),
			NetworkInterfaces: []*computepb.NetworkInterface{
				{
					Name:       proto.String(networkLink),
					Subnetwork: proto.String(subnetworkLink),
				},
			},
		},
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Java in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Java API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.


import com.google.api.gax.longrunning.OperationFuture;
import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.AttachedDisk.Type;
import com.google.cloud.compute.v1.AttachedDiskInitializeParams;
import com.google.cloud.compute.v1.Image;
import com.google.cloud.compute.v1.ImagesClient;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.Vector;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateInstancesAdvanced {

  /**
   * Create an AttachedDisk object to be used in VM instance creation. Uses an image as the source
   * for the new disk.
   *
   * @param diskType the type of disk you want to create. This value uses the following format:
   * "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)". For example:
   * "zones/us-west3-b/diskTypes/pd-ssd"
   * @param diskSizeGb size of the new disk in gigabytes
   * @param boot boolean flag indicating whether this disk should be used as a boot disk of an
   * instance
   * @param sourceImage source image to use when creating this disk. You must have read access to
   * this disk. This can be one of the publicly available images or an image from one of your
   * projects. This value uses the following format:
   * "projects/{project_name}/global/images/{image_name}"
   * @return AttachedDisk object configured to be created using the specified image.
   */
  private static AttachedDisk diskFromImage(String diskType, int diskSizeGb, boolean boot,
      String sourceImage) {
    AttachedDisk disk =
        AttachedDisk.newBuilder()
            .setBoot(boot)
            // Remember to set auto_delete to True if you want the disk to be deleted when
            // you delete your VM instance.
            .setAutoDelete(true)
            .setType(Type.PERSISTENT.toString())
            .setInitializeParams(
                AttachedDiskInitializeParams.newBuilder()
                    .setSourceImage(sourceImage)
                    .setDiskSizeGb(diskSizeGb)
                    .setDiskType(diskType)
                    .build())
            .build();
    return disk;
  }

  /**
   * Send an instance creation request to the Compute Engine API and wait for it to complete.
   *
   * @param project project ID or project number of the Cloud project you want to use.
   * @param zone name of the zone to create the instance in. For example: "us-west3-b"
   * @param instanceName name of the new virtual machine (VM) instance.
   * @param disks a list of compute_v1.AttachedDisk objects describing the disks you want to attach
   * to your new instance.
   * @param machineType machine type of the VM being created. This value uses the following format:
   * "zones/{zone}/machineTypes/{type_name}".
   * For example: "zones/europe-west3-c/machineTypes/f1-micro"
   * @param network name of the network you want the new instance to use. For example:
   * "global/networks/default" represents the network named "default", which is created
   * automatically for each project.
   * @param subnetwork name of the subnetwork you want the new instance to use. This value uses the
   * following format: "regions/{region}/subnetworks/{subnetwork_name}"
   * @return Instance object.
   */
  private static Instance createWithDisks(String project, String zone, String instanceName,
      Vector<AttachedDisk> disks, String machineType, String network, String subnetwork)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    try (InstancesClient instancesClient = InstancesClient.create()) {
      // Use the network interface provided in the networkName argument.
      NetworkInterface networkInterface;
      if (subnetwork != null) {
        networkInterface = NetworkInterface.newBuilder()
            .setName(network).setSubnetwork(subnetwork)
            .build();
      } else {
        networkInterface = NetworkInterface.newBuilder()
            .setName(network).build();
      }

      machineType = String.format("zones/%s/machineTypes/%s", zone, machineType);

      // Bind `instanceName`, `machineType`, `disk`, and `networkInterface` to an instance.
      Instance instanceResource =
          Instance.newBuilder()
              .setName(instanceName)
              .setMachineType(machineType)
              .addAllDisks(disks)
              .addNetworkInterfaces(networkInterface)
              .build();

      System.out.printf("Creating instance: %s at %s ", instanceName, zone);

      // Insert the instance in the specified project and zone.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(project)
          .setZone(zone)
          .setInstanceResource(instanceResource).build();

      OperationFuture<Operation, Operation> operation = instancesClient.insertAsync(
          insertInstanceRequest);

      // Wait for the operation to complete.
      Operation response = operation.get(3, TimeUnit.MINUTES);

      if (response.hasError()) {
        System.out.println("Instance creation failed ! ! " + response);
        return null;
      }
      System.out.println("Operation Status: " + response.getStatus());

      return instancesClient.get(project, zone, instanceName);
    }
  }

Node.js

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Node.js in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Node.js API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const networkLink = 'global/networks/default';
// const subnetworkLink = 'regions/europe-central2/subnetworks/default';

const compute = require('@google-cloud/compute');

// Creates a new VM instance with Debian 10 operating system in specified network and subnetwork.
async function createInstanceWithSubnet() {
  const instancesClient = new compute.InstancesClient();
  const imagesClient = new compute.ImagesClient();

  // List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details.
  const [newestDebian] = await imagesClient.getFromFamily({
    project: 'debian-cloud',
    family: 'debian-10',
  });

  const [response] = await instancesClient.insert({
    project: projectId,
    zone,
    instanceResource: {
      name: instanceName,
      disks: [
        {
          initializeParams: {
            diskSizeGb: '10',
            sourceImage: newestDebian.selfLink,
            diskType: `zones/${zone}/diskTypes/pd-standard`,
          },
          autoDelete: true,
          boot: true,
          type: 'PERSISTENT',
        },
      ],
      machineType: `zones/${zone}/machineTypes/n1-standard-1`,
      networkInterfaces: [
        {
          name: networkLink,
          subnetwork: subnetworkLink,
        },
      ],
    },
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createInstanceWithSubnet();

Python

Bevor Sie dieses Beispiel anwenden, folgen Sie den Schritten zur Einrichtung von Python in der Compute Engine-Kurzanleitung zur Verwendung von Clientbibliotheken. Weitere Informationen finden Sie in der Referenzdokumentation zur Compute Engine Python API.

Richten Sie die Standardanmeldedaten für Anwendungen ein, um sich bei Compute Engine zu authentifizieren. Weitere Informationen finden Sie unter Authentifizierung für eine lokale Entwicklungsumgebung einrichten.

from __future__ import annotations

import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1

def get_image_from_family(project: str, family: str) -> compute_v1.Image:
    """
    Retrieve the newest image that is part of a given family in a project.

    Args:
        project: project ID or project number of the Cloud project you want to get image from.
        family: name of the image family you want to get image from.

    Returns:
        An Image object.
    """
    image_client = compute_v1.ImagesClient()
    # List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details
    newest_image = image_client.get_from_family(project=project, family=family)
    return newest_image

def disk_from_image(
    disk_type: str,
    disk_size_gb: int,
    boot: bool,
    source_image: str,
    auto_delete: bool = True,
) -> compute_v1.AttachedDisk:
    """
    Create an AttachedDisk object to be used in VM instance creation. Uses an image as the
    source for the new disk.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        source_image: source image to use when creating this disk. You must have read access to this disk. This can be one
            of the publicly available images or an image from one of your projects.
            This value uses the following format: "projects/{project_name}/global/images/{image_name}"
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created using the specified image.
    """
    boot_disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.source_image = source_image
    initialize_params.disk_size_gb = disk_size_gb
    initialize_params.disk_type = disk_type
    boot_disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    boot_disk.auto_delete = auto_delete
    boot_disk.boot = boot
    return boot_disk

def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result

def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)

def create_with_subnet(
    project_id: str, zone: str, instance_name: str, network_link: str, subnet_link: str
) -> compute_v1.Instance:
    """
    Create a new VM instance with Debian 10 operating system in specified network and subnetwork.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"

    Returns:
        Instance object.
    """
    newest_debian = get_image_from_family(project="debian-cloud", family="debian-10")
    disk_type = f"zones/{zone}/diskTypes/pd-standard"
    disks = [disk_from_image(disk_type, 10, True, newest_debian.self_link)]
    instance = create_instance(
        project_id,
        zone,
        instance_name,
        disks,
        network_link=network_link,
        subnetwork_link=subnet_link,
    )
    return instance

REST

Gehen Sie vor, wie in der API-Anleitung zum Erstellen einer VM aus einem Image oder einem Snapshot beschrieben. Geben Sie dabei aber das Feld subnet im Anfragetext an. Wenn Sie leere Laufwerke hinzufügen möchten, geben Sie kein Quell-Image an. Optional können Sie die Attribute diskSizeGb, diskType und labels angeben.

POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances

{
   "machineType":"zones/MACHINE_TYPE_ZONE/machineTypes/MACHINE_TYPE",
   "name":"VM_NAME",

   "disks":[
      {
         "initializeParams":{
            "sourceImage":"projects/IMAGE_PROJECT/global/images/IMAGE"
         },
         "boot":true
      }
   ],

   "networkInterfaces":[
      {
         "network":"global/networks/NETWORK_NAME",
         "subnetwork":"regions/REGION/subnetworks/SUBNET_NAME",
         "accessConfigs":{
            "name":"External NAT",
            "type":"ONE_TO_ONE_NAT"
         }
      }
   ],

   "shieldedInstanceConfig":{
      "enableSecureBoot":"ENABLE_SECURE_BOOT"
   }
}

Dabei gilt:

  • PROJECT_ID ist die ID des Projekts, in dem die VM erstellt werden soll.
  • ZONE ist die Zone, in der die VM erstellt werden soll.
  • MACHINE_TYPE_ZONE ist die Zone mit dem Maschinentyp, der für die neue VM verwendet werden soll.
  • MACHINE_TYPE legt einen vordefinierten oder benutzerdefinierten Maschinentyp für die neue VM fest.
  • VM_NAME ist der Name der neuen VM.
  • IMAGE_PROJECT: Projekt, das das Image enthält
    Wenn Sie beispielsweise debian-10 als Image-Familie angeben, geben Sie debian-cloud als Image-Projekt an.
  • IMAGE or IMAGE_FAMILY: Wählen Sie eine der folgenden Optionen aus:
    • IMAGE: eine bestimmte Version eines öffentlichen Images
      Beispiel: "sourceImage": "projects/debian-cloud/global/images/debian-10-buster-v20200309"
    • IMAGE_FAMILY: eine Image-Familie
      . Dadurch wird die VM aus dem neuesten nicht verworfenen Betriebssystem-Image erstellt. Wenn Sie beispielsweise "sourceImage": "projects/debian-cloud/global/images/family/debian-10" angeben, legt Compute Engine eine VM aus der neuesten Version des Betriebssystem-Images in der Debian 10-Image-Familie an.
  • NETWORK_NAME: das VPC-Netzwerk, das Sie für die VM verwenden möchten. Sie können default angeben, um Ihr Standardnetzwerk zu verwenden.
  • REGION ist die Region, in der sich das angegebene Subnetz befindet.
  • SUBNET_NAME ist der Name des Subnetzes.
  • ENABLE_SECURE_BOOT: (Optional) Wenn Sie ein Image ausgewählt haben, das Shielded VM-Features unterstützt, aktiviert Compute Engine standardmäßig das Virtual Trusted Platform Module (vTPM) und das Integritätsmonitoring. Compute Engine aktiviert nicht standardmäßig Secure Boot.

    Wenn Sie für enableSecureBoot den Wert true angeben, erstellt Compute Engine eine VM, bei der alle drei Shielded VM-Features aktiviert sind. Nachdem Compute Engine Ihre VM gestartet hat, müssen Sie die VM beenden, um Shielded VM-Optionen zu ändern.

VM erstellen, die für das Ops-Agent-Monitoring und -Logging konfiguriert ist

Der Ops-Agent erfasst Telemetriedaten für VMs, die Sie dann für die Fehlerbehebung und Leistungsoptimierung verwenden können. Sie können den Ops-Agent beim Erstellen einer VM oder auf vorhandenen VMs installieren, wie in den folgenden Themen beschrieben: