Memulihkan dari snapshot

Disk adalah disk booting yang digunakan untuk memulai dan menjalankan sistem operasi pada instance komputasi atau disk non-boot yang digunakan instance hanya untuk penyimpanan data.

Anda dapat menggunakan snapshot untuk mencadangkan dan memulihkan data disk dengan cara berikut:

Sebelum memulai

  • Jika Anda belum melakukannya, siapkan autentikasi. Autentikasi adalah proses verifikasi identitas Anda untuk mengakses layanan dan API Google Cloud. Untuk menjalankan kode atau contoh dari lingkungan pengembangan lokal, Anda dapat mengautentikasi ke Compute Engine dengan memilih salah satu opsi berikut:

    Select the tab for how you plan to use the samples on this page:

    Console

    When you use the Google Cloud console to access Google Cloud services and APIs, you don't need to set up authentication.

    gcloud

    1. Install the Google Cloud CLI, then initialize it by running the following command: 

      gcloud init
    2. Set a default region and zone.

      3. Go

      Untuk menggunakan contoh Go di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.

      2. To initialize the gcloud CLI, run the following command: 

        gcloud init

      3. If you're using a local shell, then create local authentication credentials for your user account: 

        gcloud auth application-default login

        You don't need to do this if you're using Cloud Shell.

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      Java

      Untuk menggunakan contoh Java di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.

      2. To initialize the gcloud CLI, run the following command: 

        gcloud init

      3. If you're using a local shell, then create local authentication credentials for your user account: 

        gcloud auth application-default login

        You don't need to do this if you're using Cloud Shell.

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      Node.js

      Untuk menggunakan contoh Node.js di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.

      2. To initialize the gcloud CLI, run the following command: 

        gcloud init

      3. If you're using a local shell, then create local authentication credentials for your user account: 

        gcloud auth application-default login

        You don't need to do this if you're using Cloud Shell.

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      Python

      Untuk menggunakan contoh Python di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.

      2. To initialize the gcloud CLI, run the following command: 

        gcloud init

      3. If you're using a local shell, then create local authentication credentials for your user account: 

        gcloud auth application-default login

        You don't need to do this if you're using Cloud Shell.

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      REST

      Untuk menggunakan contoh REST API di halaman ini dalam lingkungan pengembangan lokal, gunakan kredensial yang Anda berikan ke gcloud CLI.

        Install the Google Cloud CLI, then initialize it by running the following command: 

        gcloud init

      Untuk informasi selengkapnya, lihat Melakukan autentikasi untuk menggunakan REST dalam dokumentasi autentikasi Google Cloud.

Peran yang diperlukan

Untuk mendapatkan izin yang diperlukan untuk memulihkan dari snapshot, minta administrator untuk memberi Anda peran IAM Compute Instance Admin (v1) (roles/compute.instanceAdmin.v1) di project. Untuk mengetahui informasi selengkapnya tentang cara memberikan peran, lihat Mengelola akses ke project, folder, dan organisasi.

Peran bawaan ini berisi izin yang diperlukan untuk memulihkan dari snapshot. Untuk melihat izin yang benar-benar diperlukan, luaskan bagian Izin yang diperlukan:

Izin yang diperlukan

Izin berikut diperlukan untuk memulihkan dari snapshot:

  • Untuk membuat disk dari snapshot:
    • compute.disks.create pada project
    • compute.instances.attachDisk pada instance
    • compute.disks.use pada disk yang akan dipasang
    • compute.snapshots.useReadOnly, compute.snapshots.create, atau compute.disks.createSnapshot pada project
  • Untuk membuat instance dari snapshot disk booting dan non-boot, setidaknya Anda memerlukan izin berikut:
    • compute.instances.create pada project
    • compute.snapshots.useReadOnly pada snapshot
    • compute.disks.create pada project
    • compute.disks.use pada disk
    • compute.instances.attachDisk pada instance

Anda mungkin juga bisa mendapatkan izin ini dengan peran khusus atau peran bawaan lainnya.

Batasan

  • Disk baru setidaknya harus berukuran sama dengan disk sumber asli untuk snapshot. Jika Anda membuat disk yang lebih besar dari disk sumber asli untuk snapshot, Anda harus mengubah ukuran sistem file pada disk tersebut untuk menyertakan kapasitas disk tambahan. Bergantung pada sistem operasi dan jenis sistem file, Anda mungkin perlu menggunakan alat pengubahan ukuran sistem file yang berbeda. Untuk mengetahui informasi selengkapnya, lihat dokumentasi sistem operasi.

  • Anda dapat membuat disk zona atau regional baru dari snapshot tertentu maksimal setiap sepuluh menit sekali. Jika ingin mengirimkan burst permintaan untuk mengambil snapshot disk, Anda dapat mengirimkan maksimal 6 permintaan dalam 60 menit. Batas ini tidak berlaku saat membuat disk regional dari snapshot. Untuk mengetahui informasi selengkapnya, lihat Batas frekuensi snapshot.

Membuat disk dari snapshot dan, jika perlu, melampirkan ke instance

Jika Anda mencadangkan boot disk atau non-boot disk dengan snapshot, Anda dapat membuat disk baru berdasarkan snapshot tersebut.

Konsol

  1. Di Konsol Google Cloud, buka halaman Snapshots.

    Buka Snapshots

  2. Temukan nama snapshot yang ingin Anda pulihkan.

  3. Buka halaman Disks.

    Buka halaman Disks

  4. Klik Create new disk.

  5. Tetapkan parameter konfigurasi berikut:

    • Nama untuk disk.
    • Jenis untuk disk.
    • Secara opsional, Anda dapat mengganti pilihan region dan zona default. Anda dapat memilih region dan zona mana pun, terlepas dari lokasi penyimpanan snapshot sumber.

  6. Di bagian Source type, klik Snapshot.

  7. Pilih nama snapshot yang akan dipulihkan.

  8. Pilih ukuran disk baru, dalam gigabyte. Jumlah ini harus sama dengan atau lebih besar dari disk sumber asli untuk snapshot.

  9. Klik Create untuk membuat disk.

Jika ingin, Anda dapat melampirkan disk non-boot ke instance.

gcloud

  1. Gunakan perintah gcloud compute snapshots list untuk menemukan nama snapshot yang ingin Anda pulihkan:

    gcloud compute snapshots list

  2. Gunakan perintah gcloud compute snapshots describe untuk menemukan ukuran snapshot yang ingin Anda pulihkan:

    gcloud compute snapshots describe SNAPSHOT_NAME

    Ganti SNAPSHOT_NAME dengan nama snapshot yang sedang dipulihkan.

  3. Gunakan perintah gcloud compute disks create untuk membuat disk regional atau zona baru dari snapshot Anda. Anda dapat menyertakan flag --type untuk menentukan jenis disk yang akan dibuat.

    Untuk membuat disk zonal:

    gcloud compute disks create DISK_NAME \
    --size=DISK_SIZE \
    --source-snapshot=SNAPSHOT_NAME \
    --type=DISK_TYPE

    Untuk membuat disk regional:

    gcloud compute disks create DISK_NAME \
    --size=DISK_SIZE \
    --source-snapshot=SNAPSHOT_NAME \
    --type=DISK_TYPE \
    --region=REGION \
    --replica-zones=ZONE1,ZONE2

    Ganti kode berikut:

    • DISK_NAME: nama disk baru
    • DISK_SIZE: ukuran disk baru, dalam gigabyte (GiB). Jumlah ini harus sama dengan atau lebih besar dari disk sumber asli untuk snapshot.
    • SNAPSHOT_NAME: nama snapshot yang dipulihkan
    • DISK_TYPE: jenis disk, misalnya, pd-ssd, hyperdisk-throughput, atau hyperdisk-balanced-high-availability
    • REGION: region yang akan ditempati disk regional, misalnya: europe-west1
    • ZONE1,ZONE2: zona dalam region tempat dua replika disk berada, misalnya: europe-west1-b dan europe-west1-c

  4. Opsional: Pasang disk baru ke instance yang ada menggunakan perintah gcloud compute instances attach-disk:

    gcloud compute instances attach-disk INSTANCE_NAME \
    --disk DISK_NAME

    Ganti kode berikut:

    • INSTANCE_NAME: nama instance
    • DISK_NAME: nama disk yang dibuat dari snapshot Anda

Go

Go

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Go Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// createDiskFromSnapshot creates a new disk in a project in given zone.
func createDiskFromSnapshot(
	w io.Writer,
	projectID, zone, diskName, diskType, snapshotLink string,
	diskSizeGb int64,
) error {
	// projectID := "your_project_id"
	// zone := "us-west3-b" // should match diskType below
	// diskName := "your_disk_name"
	// diskType := "zones/us-west3-b/diskTypes/pd-ssd"
	// snapshotLink := "projects/your_project_id/global/snapshots/snapshot_name"
	// diskSizeGb := 120

	ctx := context.Background()
	disksClient, err := compute.NewDisksRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewDisksRESTClient: %w", err)
	}
	defer disksClient.Close()

	req := &computepb.InsertDiskRequest{
		Project: projectID,
		Zone:    zone,
		DiskResource: &computepb.Disk{
			Name:           proto.String(diskName),
			Zone:           proto.String(zone),
			Type:           proto.String(diskType),
			SourceSnapshot: proto.String(snapshotLink),
			SizeGb:         proto.Int64(diskSizeGb),
		},
	}

	op, err := disksClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create disk: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Disk created\n")

	return nil
}

Java

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Java Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 


import com.google.cloud.compute.v1.Disk;
import com.google.cloud.compute.v1.DisksClient;
import com.google.cloud.compute.v1.InsertDiskRequest;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateDiskFromSnapshot {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample.

    // Project ID or project number of the Cloud project you want to use.
    String projectId = "YOUR_PROJECT_ID";

    // Name of the zone in which you want to create the disk.
    String zone = "europe-central2-b";

    // Name of the disk you want to create.
    String diskName = "YOUR_DISK_NAME";

    // The type of disk you want to create. This value uses the following format:
    // "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
    // For example: "zones/us-west3-b/diskTypes/pd-ssd"
    String diskType = String.format("zones/%s/diskTypes/pd-ssd", zone);

    // Size of the new disk in gigabytes.
    long diskSizeGb = 10;

    // The full path and name of the snapshot that you want to use as the source for the new disk.
    // This value uses the following format:
    // "projects/{projectName}/global/snapshots/{snapshotName}"
    String snapshotLink = String.format("projects/%s/global/snapshots/%s", projectId,
        "SNAPSHOT_NAME");

    createDiskFromSnapshot(projectId, zone, diskName, diskType, diskSizeGb, snapshotLink);
  }

  // Creates a new disk in a project in given zone, using a snapshot.
  public static void createDiskFromSnapshot(String projectId, String zone, String diskName,
      String diskType, long diskSizeGb, String snapshotLink)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {

    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the `disksClient.close()` method on the client to safely
    // clean up any remaining background resources.
    try (DisksClient disksClient = DisksClient.create()) {

      // Set the disk properties and the source snapshot.
      Disk disk = Disk.newBuilder()
          .setName(diskName)
          .setZone(zone)
          .setSizeGb(diskSizeGb)
          .setType(diskType)
          .setSourceSnapshot(snapshotLink)
          .build();

      // Create the insert disk request.
      InsertDiskRequest insertDiskRequest = InsertDiskRequest.newBuilder()
          .setProject(projectId)
          .setZone(zone)
          .setDiskResource(disk)
          .build();

      // Wait for the create disk operation to complete.
      Operation response = disksClient.insertAsync(insertDiskRequest)
          .get(3, TimeUnit.MINUTES);

      if (response.hasError()) {
        System.out.println("Disk creation failed!" + response);
        return;
      }
      System.out.println("Disk created. Operation Status: " + response.getStatus());
    }
  }
}

Node.js

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Node.js Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const diskName = 'YOUR_DISK_NAME';
// const diskType = 'zones/us-west3-b/diskTypes/pd-ssd';
// const diskSizeGb = 10;
// const snapshotLink = 'projects/project_name/global/snapshots/snapshot_name';

const compute = require('@google-cloud/compute');

async function createDiskFromSnapshot() {
  const disksClient = new compute.DisksClient();

  const [response] = await disksClient.insert({
    project: projectId,
    zone,
    diskResource: {
      sizeGb: diskSizeGb,
      name: diskName,
      zone,
      type: diskType,
      sourceSnapshot: snapshotLink,
    },
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create disk operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Disk created.');
}

createDiskFromSnapshot();

Python

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Python Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

from __future__ import annotations

import sys
from typing import Any

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def create_disk_from_snapshot(
    project_id: str,
    zone: str,
    disk_name: str,
    disk_type: str,
    disk_size_gb: int,
    snapshot_link: str,
) -> compute_v1.Disk:
    """
    Creates a new disk in a project in given zone.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone in which you want to create the disk.
        disk_name: name of the disk you want to create.
        disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        snapshot_link: a link to the snapshot you want to use as a source for the new disk.
            This value uses the following format: "projects/{project_name}/global/snapshots/{snapshot_name}"

    Returns:
        An unattached Disk instance.
    """
    disk_client = compute_v1.DisksClient()
    disk = compute_v1.Disk()
    disk.zone = zone
    disk.size_gb = disk_size_gb
    disk.source_snapshot = snapshot_link
    disk.type_ = disk_type
    disk.name = disk_name
    operation = disk_client.insert(project=project_id, zone=zone, disk_resource=disk)

    wait_for_extended_operation(operation, "disk creation")

    return disk_client.get(project=project_id, zone=zone, disk=disk_name)

REST

  1. Buat permintaan GET ke snapshots.list untuk menampilkan daftar snapshot di project Anda.

    GET https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/global/snapshots

    Ganti PROJECT_ID dengan project ID Anda.

  2. Buat permintaan POST untuk membuat disk zona atau disk regional menggunakan metode disks.insert masing-masing:

    Sertakan properti name, sizeGb, dan type. Untuk memulihkan disk menggunakan snapshot, Anda harus menyertakan properti sourceSnapshot.

    Untuk membuat disk zonal:

    POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/disks
{
  "name": "DISK_NAME",
  "sourceSnapshot": "SNAPSHOT_NAME",
  "sizeGb": "DISK_SIZE",
  "type": "zones/ZONE/diskTypes/DISK_TYPE"
}

    Untuk membuat disk regional:

    POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/regions/REGION/disks
{
  "name": "DISK_NAME",
  "sourceSnapshot": "SNAPSHOT_NAME",
  "region": "projects/PROJECT_ID/regions/REGION",
  "replicaZones": [
     "projects/PROJECT_ID/zones/ZONE1",
     "projects/PROJECT_ID/zones/ZONE2"
  ],
  "sizeGb": "DISK_SIZE",
  "type": "zones/ZONE/diskTypes/DISK_TYPE"
}

    Ganti kode berikut:

    • PROJECT_ID: project ID Anda
    • ZONE: zona tempat instance dan disk baru berada
    • DISK_NAME: nama disk baru
    • SNAPSHOT_NAME: snapshot sumber untuk disk yang Anda pulihkan
    • REGION: region yang akan ditempati disk regional, misalnya: europe-west1
    • ZONE1, ZONE2: zona tempat replika disk baru seharusnya berada
    • DISK_SIZE: ukuran disk baru, dalam gigabyte (GiB). Jumlah ini harus sama dengan atau lebih besar dari disk sumber asli untuk snapshot.
    • DISK_TYPE: URL lengkap atau sebagian untuk jenis disk, misalnya, PROJECT_ID/zones/ZONE/diskTypes/pd-ssd, PROJECT_ID/zones/ZONE/diskTypes/hyperdisk-balanced atau PROJECT_ID/zones/ZONE/diskTypes/hyperdisk-balanced-high-availability

  3. Opsional. Pasang disk baru ke instance yang ada.

    Buat permintaan POST ke metode instances.attachDisk, dan sertakan URL ke disk yang baru saja Anda buat dari snapshot.

    Untuk disk zona:

    POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances/INSTANCE_NAME/attachDisk
{
  "source": "/compute/v1/projects/PROJECT_ID/zones/ZONE/disks/DISK_NAME"
}

    Untuk disk regional:

    POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances/INSTANCE_NAME/attachDisk
{
  "source": "/compute/v1/projects/PROJECT_ID/regions/REGION/disks/DISK_NAME"
}

    Ganti kode berikut:

    • PROJECT_ID: project ID Anda
    • ZONE: zona tempat instance dan disk baru Anda berada
    • REGION: region tempat disk regional berada. Region ini harus sama dengan region tempat instance komputasi berada.
    • INSTANCE_NAME: nama instance tempat Anda menambahkan disk baru
    • DISK_NAME: nama disk baru

Setelah membuat dan memasang disk baru ke instance, Anda harus memasang disk tersebut sehingga sistem operasi dapat menggunakan ruang penyimpanan yang tersedia.

Membuat instance dari disk yang ada

Anda dapat membuat disk booting dan disk data dari snapshot, lalu memasang disk ini ke instance komputasi baru.

Go

Go

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Go Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// createWithExistingDisks create a new VM instance using selected disks.
// The first disk in diskNames will be used as boot disk.
func createWithExistingDisks(
	w io.Writer,
	projectID, zone, instanceName string,
	diskNames []string,
) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// diskNames := []string{"boot_disk", "disk1", "disk2"}

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	disksClient, err := compute.NewDisksRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewDisksRESTClient: %w", err)
	}
	defer disksClient.Close()

	disks := [](*computepb.Disk){}

	for _, diskName := range diskNames {
		reqDisk := &computepb.GetDiskRequest{
			Project: projectID,
			Zone:    zone,
			Disk:    diskName,
		}

		disk, err := disksClient.Get(ctx, reqDisk)
		if err != nil {
			return fmt.Errorf("unable to get disk: %w", err)
		}

		disks = append(disks, disk)
	}

	attachedDisks := [](*computepb.AttachedDisk){}

	for _, disk := range disks {
		attachedDisk := &computepb.AttachedDisk{
			Source: proto.String(disk.GetSelfLink()),
		}
		attachedDisks = append(attachedDisks, attachedDisk)
	}

	attachedDisks[0].Boot = proto.Bool(true)

	instanceResource := &computepb.Instance{
		Name:        proto.String(instanceName),
		Disks:       attachedDisks,
		MachineType: proto.String(fmt.Sprintf("zones/%s/machineTypes/n1-standard-1", zone)),
		NetworkInterfaces: []*computepb.NetworkInterface{
			{
				Name: proto.String("global/networks/default"),
			},
		},
	}

	req := &computepb.InsertInstanceRequest{
		Project:          projectID,
		Zone:             zone,
		InstanceResource: instanceResource,
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Java Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 


import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.Disk;
import com.google.cloud.compute.v1.DisksClient;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.ArrayList;
import java.util.List;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateInstanceWithExistingDisks {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample.

    // Project ID or project number of the Cloud project you want to use.
    String projectId = "YOUR_PROJECT_ID";

    // Name of the zone to create the instance in. For example: "us-west3-b"
    String zone = "europe-central2-b";

    // Name of the new virtual machine (VM) instance.
    String instanceName = "YOUR_INSTANCE_NAME";

    // Array of disk names to be attached to the new virtual machine.
    // First disk in this list will be used as the boot disk.
    List<String> diskNames = List.of("your-boot-disk", "another-disk1", "another-disk2");

    createInstanceWithExistingDisks(projectId, zone, instanceName, diskNames);
  }

  // Create a new VM instance using the selected disks.
  // The first disk in diskNames will be used as the boot disk.
  public static void createInstanceWithExistingDisks(String projectId, String zone,
      String instanceName, List<String> diskNames)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {

    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the `instancesClient.close()` method on the client to safely
    // clean up any remaining background resources.
    try (InstancesClient instancesClient = InstancesClient.create();
        DisksClient disksClient = DisksClient.create()) {

      if (diskNames.size() == 0) {
        throw new Error("At least one disk should be provided");
      }

      // Create the list of attached disks to be used in instance creation.
      List<AttachedDisk> attachedDisks = new ArrayList<>();
      for (int i = 0; i < diskNames.size(); i++) {
        String diskName = diskNames.get(i);
        Disk disk = disksClient.get(projectId, zone, diskName);
        AttachedDisk attDisk = null;

        if (i == 0) {
          // Make the first disk in the list as the boot disk.
          attDisk = AttachedDisk.newBuilder()
              .setSource(disk.getSelfLink())
              .setBoot(true)
              .build();
        } else {
          attDisk = AttachedDisk.newBuilder()
              .setSource(disk.getSelfLink())
              .build();
        }
        attachedDisks.add(attDisk);
      }

      // Create the instance.
      Instance instance = Instance.newBuilder()
          .setName(instanceName)
          // Add the attached disks to the instance.
          .addAllDisks(attachedDisks)
          .setMachineType(String.format("zones/%s/machineTypes/n1-standard-1", zone))
          .addNetworkInterfaces(
              NetworkInterface.newBuilder().setName("global/networks/default").build())
          .build();

      // Create the insert instance request.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(projectId)
          .setZone(zone)
          .setInstanceResource(instance)
          .build();

      // Wait for the create operation to complete.
      Operation response = instancesClient.insertAsync(insertInstanceRequest)
          .get(3, TimeUnit.MINUTES);

      if (response.hasError()) {
        System.out.println("Instance creation failed!" + response);
        return;
      }
      System.out.println("Operation Status: " + response.getStatus());

    }
  }
}

Node.js

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Node.js Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const diskNames = ['boot_disk', 'disk1', 'disk2'];

const compute = require('@google-cloud/compute');

async function createWithExistingDisks() {
  const instancesClient = new compute.InstancesClient();
  const disksClient = new compute.DisksClient();

  if (diskNames.length < 1) {
    throw new Error('At least one disk should be provided');
  }

  const disks = [];
  for (const diskName of diskNames) {
    const [disk] = await disksClient.get({
      project: projectId,
      zone,
      disk: diskName,
    });
    disks.push(disk);
  }

  const attachedDisks = [];

  for (const disk of disks) {
    attachedDisks.push({
      source: disk.selfLink,
    });
  }

  attachedDisks[0].boot = true;

  const [response] = await instancesClient.insert({
    project: projectId,
    zone,
    instanceResource: {
      name: instanceName,
      disks: attachedDisks,
      machineType: `zones/${zone}/machineTypes/n1-standard-1`,
      networkInterfaces: [
        {
          name: 'global/networks/default',
        },
      ],
    },
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createWithExistingDisks();

Python

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Python Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

from __future__ import annotations

import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def get_disk(project_id: str, zone: str, disk_name: str) -> compute_v1.Disk:
    """
    Gets a disk from a project.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone where the disk exists.
        disk_name: name of the disk you want to retrieve.
    """
    disk_client = compute_v1.DisksClient()
    return disk_client.get(project=project_id, zone=zone, disk=disk_name)


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)


def create_with_existing_disks(
    project_id: str, zone: str, instance_name: str, disk_names: list[str]
) -> compute_v1.Instance:
    """
    Create a new VM instance using selected disks. The first disk in disk_names will
    be used as boot disk.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disk_names: list of disk names to be attached to the new virtual machine.
            First disk in this list will be used as the boot device.

    Returns:
        Instance object.
    """
    assert len(disk_names) >= 1
    disks = [get_disk(project_id, zone, disk_name) for disk_name in disk_names]
    attached_disks = []
    for disk in disks:
        adisk = compute_v1.AttachedDisk()
        adisk.source = disk.self_link
        attached_disks.append(adisk)
    attached_disks[0].boot = True
    instance = create_instance(project_id, zone, instance_name, attached_disks)
    return instance

Membuat instance dari snapshot disk booting

Jika Anda membuat snapshot boot disk instance komputasi,Anda dapat menggunakan snapshot tersebut untuk membuat instance baru.

Untuk membuat instance komputasi dengan disk booting regional yang dibuat dari snapshot, gunakan Google Cloud CLI atau REST.

Konsol

  1. Di konsol Google Cloud, buka halaman Instance VM.

    Buka halaman VM instances

  2. Pilih project Anda, lalu klik Continue.

  3. Klik Create instance.

  4. Tentukan Nama untuk instance Anda. Untuk informasi selengkapnya, lihat Konvensi penamaan resource.

  5. Opsional: Ubah Zone untuk instance ini. Jika Anda memilih Any, Google Cloud akan otomatis memilih zona untuk Anda berdasarkan jenis dan ketersediaan mesin.

  6. Pilih Machine configuration untuk VM Anda.

  7. Di bagian Boot disk, klik Ubah, lalu lakukan tindakan berikut:

    1. Klik tab Snapshots.
    2. Dalam daftar Snapshot, klik snapshot.
    3. Tentukan jenis dan ukuran boot disk.
    4. Opsional: Untuk opsi konfigurasi lanjutan, klik Tampilkan konfigurasi lanjutan.
    5. Untuk mengonfirmasi opsi boot disk, klik Select.

  8. Di bagian Firewall, untuk mengizinkan traffic HTTP atau HTTPS ke instance, pilih Allow HTTP traffic atau Allow HTTPS traffic.

    Konsol Google Cloud menambahkan tag jaringan ke instance Anda dan membuat aturan firewall masuk yang sesuai, yang mengizinkan semua traffic yang masuk ke tcp:80 (HTTP) atau tcp:443 (HTTPS). Tag jaringan mengaitkan aturan firewall dengan instance. Untuk mengetahui informasi selengkapnya, lihat Ringkasan aturan firewall dalam dokumentasi Virtual Private Cloud.

  9. Untuk membuat dan memulai instance, klik Create.

gcloud

Boot disk zona

Gunakan perintah gcloud compute instances create dan sertakan flag --source-snapshot.

   gcloud compute instances create INSTANCE_NAME  

       --source-snapshot=BOOT_SNAPSHOT_NAME  

       --boot-disk-size=BOOT_DISK_SIZE  

       --boot-disk-type=BOOT_DISK_TYPE  

       --boot-disk-device-name=BOOT_DISK_NAME

Ganti kode berikut:

  • INSTANCE_NAME: nama untuk instance baru
  • BOOT_SNAPSHOT_NAME: nama snapshot boot disk yang ingin Anda pulihkan ke boot disk instance baru

  • BOOT_DISK_SIZE: Opsional: ukuran, dalam GiB, boot disk baru

    Ukuran harus sama dengan atau lebih besar dari ukuran disk sumber tempat snapshot dibuat.

  • BOOT_DISK_TYPE: Opsional: jenis boot disk, misalnya PROJECT_ID/zones/ZONE/diskTypes/pd-ssd atau PROJECT_ID/zones/ZONE/diskTypes/hyperdisk-balanced

  • BOOT_DISK_NAME: nama boot disk baru untuk instance ini

Boot disk regional

Gunakan perintah gcloud compute instances create dan sertakan flag --create-disk dengan properti source-snapshot, replica-zones, dan boot.

  gcloud compute instances create INSTANCE_NAME 

      --zone=ZONE 

      --create-disk=^:^name=DISK_NAME:source-snapshot=BOOT_SNAPSHOT_NAME:boot=true:type=BOOT_DISK_TYPE:replica-zones=ZONE,REMOTE_ZONE

Karakter ^:^ menentukan bahwa titik dua : digunakan sebagai pemisah antara setiap properti disk. Hal ini diperlukan agar Anda dapat menggunakan , koma saat menentukan zona untuk replica-zones.

Ganti kode berikut:

  • INSTANCE_NAME: name untuk instance baru
  • ZONE: Ke zona tempat pembuatan instance
  • DISK_NAME: Opsional: nama untuk disk
  • BOOT_SNAPSHOT_NAME: nama snapshot boot disk yang ingin Anda pulihkan ke boot disk instance baru.
  • BOOT_DISK_TYPE: Opsional: jenis boot disk, misalnya pd-ssd atau hyperdisk-balanced-high-availability
  • REMOTE_ZONE: Region tempat disk booting direplikasi. Properti replica-zones memerlukan dua zona yang dipisahkan oleh koma, dan salah satu zona harus sama dengan zona untuk instance.

Go

Go

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Go Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// createInstanceFromSnapshot creates a new VM instance with boot disk created from a snapshot.
func createInstanceFromSnapshot(w io.Writer, projectID, zone, instanceName, snapshotLink string) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// snapshotLink := "projects/project_name/global/snapshots/snapshot_name"

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	req := &computepb.InsertInstanceRequest{
		Project: projectID,
		Zone:    zone,
		InstanceResource: &computepb.Instance{
			Name: proto.String(instanceName),
			Disks: []*computepb.AttachedDisk{
				{
					InitializeParams: &computepb.AttachedDiskInitializeParams{
						DiskSizeGb:     proto.Int64(11),
						SourceSnapshot: proto.String(snapshotLink),
						DiskType:       proto.String(fmt.Sprintf("zones/%s/diskTypes/pd-standard", zone)),
					},
					AutoDelete: proto.Bool(true),
					Boot:       proto.Bool(true),
					Type:       proto.String(computepb.AttachedDisk_PERSISTENT.String()),
				},
			},
			MachineType: proto.String(fmt.Sprintf("zones/%s/machineTypes/n1-standard-1", zone)),
			NetworkInterfaces: []*computepb.NetworkInterface{
				{
					Name: proto.String("global/networks/default"),
				},
			},
		},
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Java Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 


import com.google.api.gax.longrunning.OperationFuture;
import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.AttachedDisk.Type;
import com.google.cloud.compute.v1.AttachedDiskInitializeParams;
import com.google.cloud.compute.v1.Image;
import com.google.cloud.compute.v1.ImagesClient;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.Vector;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class CreateInstancesAdvanced {

  /**
   * @param diskType the type of disk you want to create. This value uses the following format:
   * "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)". For example:
   * "zones/us-west3-b/diskTypes/pd-ssd"
   * @param diskSizeGb size of the new disk in gigabytes
   * @param boot boolean flag indicating whether this disk should be used as a boot disk of an
   * instance
   * @param diskSnapshot disk snapshot to use when creating this disk. You must have read access to
   * this disk. This value uses the following format:
   * "projects/{project_name}/global/snapshots/{snapshot_name}"
   * @return AttachedDisk object configured to be created using the specified snapshot.
   */
  private static AttachedDisk diskFromSnapshot(String diskType, int diskSizeGb, boolean boot,
      String diskSnapshot) {
    AttachedDisk disk =
        AttachedDisk.newBuilder()
            .setBoot(boot)
            // Remember to set auto_delete to True if you want the disk to be deleted when
            // you delete your VM instance.
            .setAutoDelete(true)
            .setType(Type.PERSISTENT.toString())
            .setInitializeParams(
                AttachedDiskInitializeParams.newBuilder()
                    .setSourceSnapshot(diskSnapshot)
                    .setDiskSizeGb(diskSizeGb)
                    .setDiskType(diskType)
                    .build())
            .build();
    return disk;
  }


  /**
   * Send an instance creation request to the Compute Engine API and wait for it to complete.
   *
   * @param project project ID or project number of the Cloud project you want to use.
   * @param zone name of the zone to create the instance in. For example: "us-west3-b"
   * @param instanceName name of the new virtual machine (VM) instance.
   * @param disks a list of compute_v1.AttachedDisk objects describing the disks you want to attach
   * to your new instance.
   * @param machineType machine type of the VM being created. This value uses the following format:
   * "zones/{zone}/machineTypes/{type_name}".
   * For example: "zones/europe-west3-c/machineTypes/f1-micro"
   * @param network name of the network you want the new instance to use. For example:
   * "global/networks/default" represents the network named "default", which is created
   * automatically for each project.
   * @param subnetwork name of the subnetwork you want the new instance to use. This value uses the
   * following format: "regions/{region}/subnetworks/{subnetwork_name}"
   * @return Instance object.
   */
  private static Instance createWithDisks(String project, String zone, String instanceName,
      Vector<AttachedDisk> disks, String machineType, String network, String subnetwork)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    try (InstancesClient instancesClient = InstancesClient.create()) {
      // Use the network interface provided in the networkName argument.
      NetworkInterface networkInterface;
      if (subnetwork != null) {
        networkInterface = NetworkInterface.newBuilder()
            .setName(network).setSubnetwork(subnetwork)
            .build();
      } else {
        networkInterface = NetworkInterface.newBuilder()
            .setName(network).build();
      }

      machineType = String.format("zones/%s/machineTypes/%s", zone, machineType);

      // Bind `instanceName`, `machineType`, `disk`, and `networkInterface` to an instance.
      Instance instanceResource =
          Instance.newBuilder()
              .setName(instanceName)
              .setMachineType(machineType)
              .addAllDisks(disks)
              .addNetworkInterfaces(networkInterface)
              .build();

      System.out.printf("Creating instance: %s at %s ", instanceName, zone);

      // Insert the instance in the specified project and zone.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(project)
          .setZone(zone)
          .setInstanceResource(instanceResource).build();

      OperationFuture<Operation, Operation> operation = instancesClient.insertAsync(
          insertInstanceRequest);

      // Wait for the operation to complete.
      Operation response = operation.get(3, TimeUnit.MINUTES);

      if (response.hasError()) {
        System.out.println("Instance creation failed ! ! " + response);
        return null;
      }
      System.out.println("Operation Status: " + response.getStatus());

      return instancesClient.get(project, zone, instanceName);
    }
  }

  /**
   * Create a new VM instance with boot disk created from a snapshot.
   *
   * @param project project ID or project number of the Cloud project you want to use.
   * @param zone name of the zone to create the instance in. For example: "us-west3-b"
   * @param instanceName name of the new virtual machine (VM) instance.
   * @param snapshotName link to the snapshot you want to use as the source of your boot disk in the
   * form of: "projects/{project_name}/global/snapshots/{snapshot_name}"
   * @return Instance object.
   */
  public static Instance createFromSnapshot(String project, String zone, String instanceName,
      String snapshotName)
      throws IOException, InterruptedException, ExecutionException, TimeoutException {
    String diskType = String.format("zones/%s/diskTypes/pd-standard", zone);
    Vector<AttachedDisk> disks = new Vector<>();
    disks.add(diskFromSnapshot(diskType, 11, true, snapshotName));
    return createWithDisks(project, zone, instanceName, disks, "n1-standard-1",
        "global/networks/default", null);
  }

Node.js

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Node.js Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const snapshotLink = 'projects/YOUR_PROJECT/global/snapshots/YOUR_SNAPSHOT_NAME';

const compute = require('@google-cloud/compute');

// Creates a new VM instance with boot disk created from a snapshot.
async function createInstanceFromSnapshot() {
  const instancesClient = new compute.InstancesClient();

  const [response] = await instancesClient.insert({
    project: projectId,
    zone,
    instanceResource: {
      name: instanceName,
      disks: [
        {
          initializeParams: {
            diskSizeGb: '11',
            sourceSnapshot: snapshotLink,
            diskType: `zones/${zone}/diskTypes/pd-standard`,
          },
          autoDelete: true,
          boot: true,
          type: 'PERSISTENT',
        },
      ],
      machineType: `zones/${zone}/machineTypes/n1-standard-1`,
      networkInterfaces: [
        {
          name: 'global/networks/default',
        },
      ],
    },
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createInstanceFromSnapshot();

Python

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Python Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, lihat Menyiapkan autentikasi untuk lingkungan pengembangan lokal. 

from __future__ import annotations

import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def disk_from_snapshot(
    disk_type: str,
    disk_size_gb: int,
    boot: bool,
    source_snapshot: str,
    auto_delete: bool = True,
) -> compute_v1.AttachedDisk():
    """
    Create an AttachedDisk object to be used in VM instance creation. Uses a disk snapshot as the
    source for the new disk.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        source_snapshot: disk snapshot to use when creating this disk. You must have read access to this disk.
            This value uses the following format: "projects/{project_name}/global/snapshots/{snapshot_name}"
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created using the specified snapshot.
    """
    disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.source_snapshot = source_snapshot
    initialize_params.disk_type = disk_type
    initialize_params.disk_size_gb = disk_size_gb
    disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    disk.auto_delete = auto_delete
    disk.boot = boot
    return disk


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)


def create_from_snapshot(
    project_id: str, zone: str, instance_name: str, snapshot_link: str
):
    """
    Create a new VM instance with boot disk created from a snapshot. The
    new boot disk will have 20 gigabytes.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        snapshot_link: link to the snapshot you want to use as the source of your
            boot disk in the form of: "projects/{project_name}/global/snapshots/{snapshot_name}"

    Returns:
        Instance object.
    """
    disk_type = f"zones/{zone}/diskTypes/pd-standard"
    disks = [disk_from_snapshot(disk_type, 20, True, snapshot_link)]
    instance = create_instance(project_id, zone, instance_name, disks)
    return instance

REST

Saat Anda menggunakan API untuk membuat instance dari snapshot, pembatasan berikut berlaku:

  • Hanya satu disk yang dapat digunakan sebagai boot disk.
  • Anda harus memasang disk booting sebagai disk pertama untuk instance tersebut.
  • Jika menentukan properti source, Anda tidak dapat menentukan properti initializeParams. Memberikan source menunjukkan bahwa boot disk sudah ada, tetapi properti initializeParams menunjukkan bahwa Compute Engine harus membuat boot disk baru.

Boot disk zona

Untuk membuat instance dari snapshot disk booting, gunakan metode instances.insert dan tentukan kolom sourceSnapshot di bagian properti disks. Secara opsional, Anda dapat menentukan properti diskSizeGb dan diskType untuk boot disk baru. 
POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances
{
  "name": "INSTANCE_NAME",
  "machineType": "machineTypes/MACHINE_TYPE",
  "disks": [{
     "boot": true,
     "initializeParams": {
       "sourceSnapshot": "global/snapshots/BOOT_SNAPSHOT_NAME",
       "diskSizeGb": "BOOT_DISK_SIZE",
       "diskType": "BOOT_DISK_TYPE"
      }
   }],
  "networkInterfaces": [
    {
       "nicType": "GVNIC"
    }
  ]
}
Ganti kode berikut:
  • PROJECT_ID: project ID Anda
  • ZONE: zona tempat Anda ingin membuat instance baru
  • INSTANCE_NAME: nama instance yang ingin Anda pulihkan snapshot-nya
  • MACHINE_TYPE: jenis mesin dari instance
  • BOOT_SNAPSHOT_NAME: nama snapshot yang ingin Anda gunakan untuk membuat boot disk instance baru

  • BOOT_DISK_SIZE: Opsional: ukuran, dalam kibibyte (GiB), untuk boot disk baru

    Ukuran harus sama dengan atau lebih besar dari ukuran disk sumber tempat snapshot dibuat.

  • BOOT_DISK_TYPE: Opsional: jenis boot disk, misalnya PROJECT_ID/zones/ZONE/diskTypes/pd-ssd atau PROJECT_ID/zones/ZONE/diskTypes/hyperdisk-balanced

Boot disk regional

Untuk membuat instance komputasi dengan disk booting regional menggunakan snapshot disk booting sebagai sumber, gunakan metode instances.insert dan tentukan kolom sourceSnapshot dan replicaZones di properti disks. 
   POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances
   {
     "name": "INSTANCE_NAME",
     "disks": [
       {
         "boot": true,
         "initializeParams": {
            "sourceSnapshot": "global/snapshots/BOOT_SNAPSHOT_NAME",
            "replicaZones": [
                "projects/PROJECT_ID/zones/ZONE",
                "projects/PROJECT_ID/zones/REMOTE_ZONE"
              ],
            "diskType": "BOOT_DISK_TYPE"
         }
       }
     ],
     "networkInterfaces": [
       {
         "nicType": "GVNIC"
       }
     ]
   }

Ganti kode berikut:

  • PROJECT_ID: project ID Anda
  • ZONE: nama zona tempat Anda ingin membuat instance
  • INSTANCE_NAME`: nama untuk instance
  • BOOT_SNAPSHOT_NAME: nama snapshot boot disk
  • REMOTE_ZONE: zona jarak jauh untuk disk regional

  • BOOT_DISK_TYPE: Opsional: jenis boot disk, misalnya PROJECT_ID/zones/ZONE/diskTypes/pd-ssd atau PROJECT_ID/zones/ZONE/diskTypes/hyperdisk-balanced-high-availability

Membuat instance komputasi dari snapshot non-boot disk

Jika mencadangkan disk non-boot dengan snapshot, Anda dapat membuat instance dengan disk non-boot tambahan berdasarkan snapshot tersebut.

Konsol

Saat memulihkan snapshot non-boot ke instance baru dari konsol, buat disk dari setiap snapshot terlebih dahulu. Kemudian, pasang disk baru saat Anda membuat instance.

  1. Pulihkan setiap snapshot non-boot ke disk baru.

    1. Di konsol Google Cloud, buka halaman Disks.

      Buka Disks

    2. Klik Buat disk.

    3. Tentukan Name untuk disk Anda. Untuk informasi selengkapnya, lihat Konvensi penamaan resource.

    4. Pilih Region dan Zone untuk disk ini. Disk dan instance harus berada di zona yang sama untuk disk zona, atau region untuk disk regional.

    5. Pilih Jenis disk.

    6. Di bagian Source type, pilih Snapshot.

    7. Pada kolom Source snapshot baru, pilih snapshot non-boot yang ingin Anda pulihkan ke disk baru.

    8. Untuk membuat disk, klik Buat.

    Ulangi langkah-langkah ini untuk membuat disk dari setiap snapshot yang ingin dipulihkan.

  2. Di konsol Google Cloud, buka halaman Instance VM.

    Buka halaman VM instances

  3. Pilih project Anda, lalu klik Continue.

  4. Klik Create instance.

  5. Tentukan Nama untuk instance Anda. Untuk informasi selengkapnya, lihat Konvensi penamaan resource.

  6. Pilih Region dan Zone untuk instance ini. Disk dan instance harus berada di zona yang sama untuk disk zona, atau region untuk disk regional.

  7. Pilih Jenis mesin untuk instance Anda.

  8. Jika Anda ingin mengizinkan traffic eksternal masuk, ubah aturan Firewall untuk instance.

  9. Untuk memasang disk ke instance, luaskan bagian Advanced options, lalu lakukan hal berikut:

    1. Perluas bagian Disks.
    2. Klik Pasang disk yang ada.
    3. Dalam daftar Disk, pilih disk untuk dipasang ke instance ini.
    4. Di dalam bagian Attachment Settings, pilih Mode untuk pemasangan disk, dan Deletion rule. Untuk mengetahui informasi selengkapnya tentang cara menambahkan disk baru, lihat Menambahkan Persistent Disk atau Menambahkan Hyperdisk.
    5. Klik Simpan.

    Ulangi langkah ini untuk setiap disk yang ingin dipasang.

  10. Untuk membuat dan memulai instance, klik Create.

gcloud

Buat instance menggunakan perintah gcloud compute instances create. Untuk setiap snapshot non-boot yang ingin Anda pulihkan, sertakan flag --create-disk, dan tentukan source-snapshot.

Misalnya, untuk memulihkan dua snapshot disk non-boot ke instance baru, gunakan perintah berikut:

gcloud compute instances create INSTANCE_NAME \
    --create-disk source-snapshot=SNAPSHOT_1_NAME,name=DISK_1_NAME,size=DISK_1_SIZE,type=DISK_1_TYPE \
    --create-disk source-snapshot=SNAPSHOT_2_NAME,name=DISK_2_NAME,size=DISK_2_SIZE,type=DISK_2_TYPE

Ganti kode berikut:

  • INSTANCE_NAME: nama untuk instance baru
  • SNAPSHOT_1_NAME dan SNAPSHOT_2_NAME: nama snapshot disk non-booting yang ingin Anda pulihkan
  • DISK_1_NAME dan DISK_2_NAME: nama disk non-boot baru yang akan dibuat untuk instance ini

  • DISK_1_SIZE dan DISK_2_SIZE: Opsional: ukuran, dalam gibibyte (GiB), untuk setiap disk non-boot baru

    Ukurannya harus sama dengan atau lebih besar dari ukuran disk sumber tempat snapshot dibuat.

  • DISK_1_TYPE dan DISK_2_TYPE: Opsional: jenis disk yang akan dibuat, misalnya pd-ssd atau hyperdisk-balanced

REST

Saat menggunakan REST untuk memulihkan snapshot non-boot ke instance baru, pembatasan berikut berlaku:

  • Hanya satu disk yang dapat menjadi disk booting.
  • Anda harus memasang boot disk sebagai disk pertama untuk instance tersebut.
  • Jika menentukan properti source, Anda juga tidak dapat menentukan properti initializeParams. Memberikan source menunjukkan bahwa boot disk sudah ada, tetapi properti initializeParams menunjukkan bahwa Compute Engine harus membuat boot disk baru.

Buat permintaan POST ke metode instances.insert dan tentukan kolom sourceSnapshot di bagian properti initializeParams. Anda dapat menambahkan beberapa disk non-boot dengan mengulangi properti initializeParams untuk setiap disk non-boot yang ingin dibuat. Secara opsional, Anda dapat menentukan properti diskSizeGb dan diskType untuk disk mana pun yang Anda buat.

Misalnya, untuk memulihkan dua snapshot disk non-boot ke instance baru, buat permintaan berikut:

POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances
{
  "name": "INSTANCE_NAME",
  "machineType": "machineTypes/MACHINE_TYPE",
  "networkInterfaces": [
    {
      "nicType": "GVNIC"
    }
  ],
  "disks": [
    {
      "autoDelete": "true",
      "boot": "true",
      "diskSizeGb": "BOOT_DISK_SIZE",
      "diskType": "BOOT_DISK_TYPE",
      "initializeParams": {
         "sourceImage": "projects/IMAGE_PROJECT/global/images/family/IMAGE_FAMILY"
      }
    },
    {
      "deviceName": "DEVICE_1_NAME",
      "initializeParams": {
         "sourceSnapshot": "global/snapshots/SNAPSHOT_1_NAME",
         "diskSizeGb": "DISK_1_SIZE",
         "diskType": "DISK_1_TYPE"
      }
    },
    {
      "deviceName": "DEVICE_2_NAME",
      "initializeParams": {
         "sourceSnapshot": "global/snapshots/SNAPSHOT_2_NAME",
         "diskSizeGb": "DISK_2_SIZE",
         "diskType": "DISK_2_TYPE"
      }
    }
  ]
}

Ganti kode berikut:

  • PROJECT_ID: project ID Anda
  • ZONE: zona tempat Anda ingin membuat instance
  • INSTANCE_NAME: nama untuk instance baru
  • MACHINE_TYPE: jenis mesin instance

  • DISK_SIZE: Opsional: ukuran, dalam gibibyte (GiB), disk yang sesuai

    Jika diberikan, properti ini harus sama dengan atau lebih besar dari ukuran disk sumber tempat snapshot dibuat.

  • DISK_TYPE: Opsional: URL lengkap atau sebagian untuk jenis disk yang sesuai, misalnya, PROJECT_ID/zones/ZONE/diskTypes/pd-ssd atau PROJECT_ID/zones/ZONE/diskTypes/hyperdisk-balanced

  • IMAGE_PROJECT: project yang berisi image. Misalnya, debian-cloud

  • IMAGE_FAMILY: kelompok image. Tindakan ini akan membuat instance dari image OS terbaru yang masih digunakan dalam kelompok tersebut. Misalnya, jika Anda menentukan "sourceImage": "projects/debian-cloud/global/images/family/debian-11", Compute Engine akan membuat instance menggunakan OS image versi terbaru dalam kelompok image Debian 11.

  • DEVICE_NAME: Opsional: nama perangkat yang ditampilkan di OS tamu instance

  • SNAPSHOT_NAME: nama snapshot disk non-booting yang sesuai yang ingin Anda pulihkan ke disk baru di instance