This solution provides a blueprint and methodology for onboarding your workloads more securely, reliably, and cost-effectively to Google Kubernetes Engine. It provides guidance for configuring administrative and network access to clusters. This article assumes a working understanding of Kubernetes resources and cluster administration as well as familiarity with Google Cloud Platform (GCP) networking features.
Structuring projects, Virtual Private Cloud (VPC) networks, and clusters
The following diagram shows the best structure for projects, VPC networks, regions, subnetworks, zones, and clusters.
GCP creates all of its resources within a project entity. Projects are the unit of billing and allow administrators to associate Cloud Identity and Access Management (Cloud IAM) roles with users. When roles are applied at the project level, they apply to all resources encapsulated within the project.
You should use projects to encapsulate your various operating environments. For
example, you might have
staging projects for operations teams
as well as a
test-dev project for developers. You can apply more granular and
strict policies to the projects that hold your most mission-critical and
sensitive data and workloads while applying permissive and flexible policies for
developers in the
test-dev environment to experiment.
A project may contain multiple clusters. If you have multiple workloads to deploy, you can choose to use either a single, shared cluster or separate clusters for these workloads. To help you decide, consider our best practices on choosing the size and scope of a GKE cluster.
Networks and subnetworks
Within each project, you can have one or more VPC networks, which are virtual versions of physical networks. Each VPC network is a global resource that contains other networking-related resources, such as subnetworks, external IP addresses, firewall rules, routes, your VPN, and Cloud Router. Within a VPC network, you can use subnetworks, which are regional resources, to isolate and control traffic into or out of each region between your GKE clusters.
Each project comes with a single default network. You can create and configure an additional network to map to your existing IP address management (IPAM) convention. You can then apply firewall rules to this network to filter traffic to and from your GKE nodes. By default, all internet traffic to your GKE nodes is denied.
To control communication between subnetworks, you need to
create firewall rules
that allow traffic to pass between the subnetworks. Use the
during cluster or node-pool creation to appropriately tag your
GKE nodes for the firewall rules to take effect.
You can also use tags to create routes between your subnetworks if needed.
Multi-zone and regional clusters
By default, a cluster creates its cluster master and its nodes in a single zone that you specify at the time of creation. You can improve your clusters' availability and resilience by creating multi-zone or regional clusters. Multi-zone and regional clusters distribute Kubernetes resources across multiple zones within a region.
- Create a single cluster master in one zone.
- Create nodes in multiple zones.
- Create three cluster masters across three zones.
- By default, create nodes in three zones, or in as many zones as you want.
The primary difference between regional and multi-zone clusters is that regional clusters create three masters and multi-zone clusters create only one. Note that in both cases, you are charged for node-to-node traffic across zones.
You can choose to create multi-zone or regional clusters at the time of cluster creation. You can add new zones to an existing cluster to make it multi-zone. However, you cannot modify an existing cluster to be regional. You also cannot make a regional cluster non-regional.
To learn more about multi-zone and regional clusters, see the GKE documentation.
Managing identity and access
Below is an illustration of IAM policy layout that provides the principle of least privilege for a dev project that is set up for developers to develop and test their upcoming features and bug fixes, as well as a prod project for production traffic:
As the following table shows, there are 4 groups of users within the organization with varying levels of permissions, granted through IAM roles across the 2 projects:
||dev||Can create Kubernetes resources for the existing clusters within the project, is not allowed to create or delete clusters.|
||prod||Full administrative access to the clusters and Kubernetes resources running within the project.|
||prod||Create, modify, and delete firewall rules and SSL certificates as well as view resources that were created within each cluster including the logs of the running pods.|
||prod||Create, modify, and delete networking resources, except for firewall rules and SSL certificates.|
In addition to the 3 teams with access to the
prod project, an additional
is given the
container.developer role for
prod, allowing it to create, list,
and delete resources within the cluster. Service accounts can be used to give
automation scripts or deployment frameworks the ability to act on your behalf.
Deployments to your production project and clusters should go through an
dev project there are multiple developers working on the same
application within the same cluster. This is facilitated by
which the cluster user can create. Each developer
can create resources within their own namespace, therefore avoiding naming
conflicts. They can also reuse the same YAML configuration files for their
deployments so that their configurations stay as similar as possible during
development iterations. Namespaces can also be used to create
quotas on CPU, memory, and storage
usage within the cluster, ensuring that one developer
isn't using too many resources within the cluster. The next section discusses
restricting users to operating within certain namespaces.
GKE clusters running Kubernetes 1.6 and above can take advantage of further restrictions to what users are authorized to do in individual clusters. Cloud IAM can provide users access to full clusters and the resources within them, but Kubernetes Role-Based Access Control (RBAC) allows you to use the Kubernetes API to further constrain the actions users can perform inside their clusters.
With RBAC, cluster administrators apply fine-grained policies to individual
namespaces within their clusters or to the cluster as a whole. The Kubernetes
command line interface kubectl uses the active credentials from the
tool, allowing cluster admins to map roles to GCP identities
(users and service accounts) as subjects in RoleBindings.
For example, in the figure
below there are two users,
user-b, who have been granted the
pod-reader roles on the
As another example, there are GCP project-level IAM roles that give certain users access to all clusters in a project. In addition, individual namespace- and cluster-level role bindings are added through RBAC to give fine-grained access to resources within particular clusters or namespaces.
Kubernetes includes some default roles, but as a cluster
administrator, you can create your own that map more closely to your
organizational needs. Below is an example role that allows users only to view,
edit, and update ConfigMaps but not delete them, because the
delete verb is
kind: Role apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: namespace: default name: config-editor rules: - apiGroups: [""] resources: ["configmaps"] verbs: ["get", "list", "watch", "create", "update", "patch"]
After you have defined roles, you can apply those roles to the cluster or
namespace through bindings. Bindings associate roles to their users, groups,
or service accounts. Below is an example of binding our previously created role
(config-editor) to the firstname.lastname@example.org user and the
kind: RoleBinding apiVersion: rbac.authorization.k8s.io/v1beta1 metadata: name: config-editors namespace: development subjects: - kind: User name: email@example.com apiGroup: rbac.authorization.k8s.io roleRef: kind: ClusterRole name: config-editor apiGroup: rbac.authorization.k8s.io
For more information on RBAC, see the GKE documentation.
Image access and sharing
Making images public
You can make images public by making the objects and buckets backing them public. For more detailed instructions, see the Container Registry Access Control documentation.
Accessing images across projects
You can share container images between projects by ensuring that your Kubernetes
nodes use a service account. The
default service account
associated with your project is in the form
After you have this identifier, you can grant it access
projects where you want to use the Container Registry. Use a custom
service account that has restricted permissions, however, because the default
to the entire project.
To use a different service account for your clusters, provide the
service account at cluster or node-pool creation by using the
--service-account flag. For example, to use the
gke-sa service account in
gcloud container clusters create west --service-account \ firstname.lastname@example.org
Kubernetes provides the Service abstraction that provides load-balancing and service discovery across sets of pods within a cluster as well as to legacy systems running outside the cluster. The sections below describe best practices for communication between Kubernetes pods and with other systems, including other Kubernetes clusters.
Communicating within the same cluster
Kubernetes allows you to define services that group pods that are running in the cluster based on a set of labels. This group of pods can be discovered within your cluster using DNS. For more information on service discovery in Kubernetes, go to the Connecting Applications with Services documentation.
A cluster-local DNS server,
kube-dns, is deployed in each GKE
cluster that handles mapping service names to healthy pod IPs.
By default, the Kubernetes DNS server returns the service's cluster IP address.
This IP address is static throughout the lifetime of the service. When sending
traffic to this IP, the iptables on the node will load balance packets across
the ready pods that match the selectors of the service. These iptables are
programmed automatically by the
kube-proxy service running on each node.
If you want service discovery and health monitoring but would rather have the DNS service return you the IPs of pods rather than a virtual IP, you can provision the service with the ClusterIP field set to "None," which makes the service headless. In this case, the DNS server returns a list of A records that map the DNS name of your service to the A records of the ready pods that match the label selectors defined by the service. The records in the response rotate to facilitate spreading load across the various pods. Some client-side DNS resolvers might cache DNS replies, rendering the A record rotation ineffective. The advantages of using the ClusterIP are listed in the Kubernetes documentation.
One typical use case for headless services is with StatefulSets. StatefulSets are well-suited to run stateful applications that require stable storage and networking among their replicas. This type of deployment provisions pods that have a stable network identity, meaning their hostnames can be resolved in the cluster. Although the pod's IP address may change, its hostname DNS entry will be kept up to date and resolvable.
Packet flow: ClusterIP
The following diagram shows the DNS response and packet flow of a standard
Kubernetes service. While pod IP addresses are routable from outside the
cluster, a service's cluster IP address is only accessible within the cluster.
These virtual IP addresses are implemented by doing destination network
address translation (DNAT) in each Kubernetes node. The
running on each node keeps forwarding rules up to date on each node that map
the cluster IP address to the IP addresses of healthy pods
across the cluster. If there is a pod of the service running on the local node,
then that pod is used, otherwise a random pod in the cluster is chosen.
For more information on how Service IPs are implemented, go to the Kubernetes documentation. For a deep dive into GKE networking, watch the Next 2017 talk on YouTube:
Below is an example of the DNS response and traffic pattern for a headless service. Pod IP addresses are routable through the default GCP subnetwork route tables and are accessed by your application directly.
You can use Kubernetes Engine's network policy enforcement to control the communication between your cluster's Pods and Services. To define a network policy on Kubernetes Engine, you can use the Kubernetes Network Policy API to create Pod-level firewall rules. These firewall rules determine which Pods and Services can access one another inside your cluster.
Network policies are a kind of defense indepth that enhances the security of the workloads running on your cluster. For example, you can create a network policy to ensure that a compromised front-end service in your application cannot communicate directly with a billing or accounting service several levels down.
Network policies can also be used to isolate workloads belonging to different tenants. For example, you can provide secure multi-tenancy by defining a tenant-per-namespace model. In such a model, network policy rules can ensure that Pods and Services in a given namespace cannot access other Pods or Services in a different namespace.
To learn more about network policies, see the GKE documentation.
Connecting to a GKE cluster from inside Google Cloud Platform
To connect to your services from outside of your cluster but within the GCP
network's private IP space, use
internal load balancing.
When creating a Service with
type: Load Balancer and a
cloud.google.com/load-balancer-type: Internal annotation in Kubernetes,
an internal Network Load Balancer
is created in your GCP project and configured to distribute TCP and UDP traffic
Connecting from inside a cluster to external services
In many cases it is necessary to connect your applications running inside of Kubernetes with a service, database, or application that lives outside of the cluster. You have 3 options, as outlined below.
In Kubernetes 1.6 and above, you can configure the cluster internal DNS service
kube-dns) to forward DNS queries for a certain domain to an external DNS
server. This is useful when you have authoritative DNS servers that should be
queried for a domain that your Kubernetes pods will need to leverage.
External name services
External name services allow you to map a DNS record to a service name within the cluster. In this case, DNS lookups for the in-cluster service return a CNAME record of your choosing. You should use this if you only have a few records that you want to map back to existing DNS services.
Services without selectors
You can create services without a selector and then manually add endpoints to it to populate service discovery with the correct values. This allows you to use the same service discovery mechanism for your in- cluster services while ensuring that systems without service discovery through DNS are still reachable. While this approach is the most flexible, it also requires the most configuration and maintenance in the long term.
For more information on DNS, go to the Kubernetes DNS Pods and Services documentation page.
Receiving traffic from the internet to your cluster
Traffic from the internet can be directed to your services running in Kubernetes by using two different methods, namely network- or HTTP(s)-load balancing.
Kubernetes services should be created as LoadBalancer type for external TCP/UDP load balancing. Kubernetes creates a Network Load Balancer in your GCP project and maps it to the nodes of your Kubernetes Engine cluster. This is an easy way to get load balancing for your TCP and UDP workloads with minimal configuration. The Network Load Balancer is scoped regionally, so it can only balance traffic against pods running within the same region.
For HTTP(S) Load Balancing, you should take advantage of
Google's Global HTTP(S) Load Balancer,
which can load balance traffic across multiple regions using a single anycast IP
address. In Kubernetes, you can create Ingress resources that allow you to map
hostnames and paths to services within your cluster. For Ingress to work
properly, your services must be created with
GKE nodes are provisioned as
in Compute Engine. As such,
they adhere to the same
stateful firewall mechanism as other instances. These
firewall rules are applied within your network to instances by
Each node pool
receives its own set of tags that you can use in rules. By default, each
instance belonging to a node pool receives a tag that identifies a specific
Kubernetes Engine cluster that this node pool is a part of. This tag is used in
firewall rules that Kubernetes Engine creates automatically for you. You can add
your own custom tags at either cluster or node pool creation time using
--tags flag in the gcloud command line.
For example, to allow an internal load balancer to access port 8080 on all your nodes, you would use the following commands:
gcloud compute firewall-rules create \ allow-8080-fwr --target-tags allow-8080 --allow tcp:8080 \ --network gke --source-range 220.127.116.11/22 gcloud container clusters create my-cluster --tags allow-8080
The following example shows how to tag one cluster so that internet traffic can access nodes on port 30000 while the other cluster is tagged to allow traffic from the VPN to port 40000. This is useful when exposing a service through a NodePort that should only be accessible using privileged networks like a VPN back to a corporate data center, or from another cluster within your project.
Connecting to an on-premises data center
There are several Cloud Interconnect options for connecting to on-premises data centers. These options are not mutually exclusive, so you may have a combination, based on workload and requirements:
- Internet for workloads that aren't data intensive or latency sensitive. Google has more than 100 points of presence (PoPs) connecting to service providers across the world.
- Direct Peering for workloads that require dedicated bandwidth, are latency sensitive, and need access to all Google services, including the full suite of GCP products. Direct Peering is a Layer 3 connection, done by exchanging BGP routes, and thus requires a registered ASN.
- Carrier Peering is that same as Direct Peering, but done through a service provider. This is a great option if you don't have a registered ASN, or have existing relationships with a preferred service provider.
- Cloud VPN is configured over Layer 3 interconnect and internet options (1, 2, and 3), if IPsec encryption is required, or if you want to extend your private network into your private Compute Engine network.
- Try out other Google Cloud Platform features for yourself. Have a look at our tutorials.