Membuat VM dengan jenis mesin kustom


Compute Engine menawarkan jenis mesin yang telah ditetapkan yang dapat Anda gunakan saat membuat instance VM. Jenis mesin yang telah ditetapkan memiliki jumlah vCPU dan memori yang telah diatur, serta dikenai tagihan dengan harga tetap. Jika VM yang telah ditetapkan tidak memenuhi kebutuhan Anda, Anda dapat membuat instance VM dengan setelan hardware virtual kustom. Secara khusus, Anda dapat membuat instance VM dengan jumlah vCPU dan memori kustom, yang dengan kata lain menggunakan jenis mesin kustom. Jenis mesin kustom tersedia di kelompok mesin tujuan umum hanya untuk seri mesin N dan E. Jenis mesin kustom tidak tersedia untuk seri mesin C dan Tau. Anda dapat membuat VM kustom pada jenis mesin N4, N2, N2D, E2, atau N1.

VM kustom ideal dalam skenario berikut:

  • Workload yang tidak sesuai untuk jenis VM yang telah ditetapkan.
  • Workload yang memerlukan daya pemrosesan atau memori lebih besar, tetapi tidak butuh semua upgrade yang disediakan oleh jenis mesin tingkat berikutnya.

Sebelum memulai

  • Baca dokumentasi kelompok mesin.
  • Jika Anda belum melakukannya, siapkan autentikasi. Autentikasi adalah proses verifikasi identitas Anda untuk mengakses layanan dan API Google Cloud. Untuk menjalankan kode atau contoh dari lingkungan pengembangan lokal, Anda dapat mengautentikasi ke Compute Engine dengan memilih salah satu opsi berikut:

    Select the tab for how you plan to use the samples on this page:

    Console

    When you use the Google Cloud console to access Google Cloud services and APIs, you don't need to set up authentication.

    gcloud

    1. Install the Google Cloud CLI, then initialize it by running the following command:

      gcloud init
    2. Set a default region and zone.
    3. Terraform

      Untuk menggunakan contoh Terraform di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.
      2. To initialize the gcloud CLI, run the following command:

        gcloud init
      3. Buat kredensial autentikasi lokal untuk Akun Google Anda:

        gcloud auth application-default login

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      Go

      Untuk menggunakan contoh Go di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.
      2. To initialize the gcloud CLI, run the following command:

        gcloud init
      3. Buat kredensial autentikasi lokal untuk Akun Google Anda:

        gcloud auth application-default login

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      Java

      Untuk menggunakan contoh Java di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.
      2. To initialize the gcloud CLI, run the following command:

        gcloud init
      3. Buat kredensial autentikasi lokal untuk Akun Google Anda:

        gcloud auth application-default login

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      Node.js

      Untuk menggunakan contoh Node.js di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.
      2. To initialize the gcloud CLI, run the following command:

        gcloud init
      3. Buat kredensial autentikasi lokal untuk Akun Google Anda:

        gcloud auth application-default login

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      PHP

      Untuk menggunakan contoh PHP di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.
      2. To initialize the gcloud CLI, run the following command:

        gcloud init
      3. Buat kredensial autentikasi lokal untuk Akun Google Anda:

        gcloud auth application-default login

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      Python

      Untuk menggunakan contoh Python di halaman ini dalam lingkungan pengembangan lokal, instal dan lakukan inisialisasi gcloud CLI, lalu siapkan Kredensial Default Aplikasi dengan kredensial pengguna Anda.

      1. Install the Google Cloud CLI.
      2. To initialize the gcloud CLI, run the following command:

        gcloud init
      3. Buat kredensial autentikasi lokal untuk Akun Google Anda:

        gcloud auth application-default login

      Untuk informasi selengkapnya, lihat Set up authentication for a local development environment.

      REST

      Untuk menggunakan contoh REST API di halaman ini dalam lingkungan pengembangan lokal, gunakan kredensial yang Anda berikan ke gcloud CLI.

        Install the Google Cloud CLI, then initialize it by running the following command:

        gcloud init

      Untuk informasi selengkapnya, lihat Melakukan autentikasi untuk menggunakan REST dalam dokumentasi autentikasi Google Cloud.

Peran yang diperlukan

Untuk mendapatkan izin yang diperlukan guna membuat VM dengan jenis mesin kustom, minta administrator untuk memberi Anda peran IAM Compute Instance Admin (v1) (roles/compute.instanceAdmin.v1) di project. Untuk mengetahui informasi selengkapnya tentang cara memberikan peran, lihat Mengelola akses ke project, folder, dan organisasi.

Peran bawaan ini berisi izin yang diperlukan untuk membuat VM dengan jenis mesin kustom. Untuk melihat izin yang benar-benar diperlukan, luaskan bagian Izin yang diperlukan:

Izin yang diperlukan

Izin berikut diperlukan untuk membuat VM dengan jenis mesin kustom:

  • Untuk menambahkan memori tambahan ke VM yang ada: compute.instances.setMachineType di VM
  • Untuk membuat VM dengan jenis mesin kustom:
    • compute.instances.create pada project
    • Untuk menggunakan image kustom guna membuat VM: compute.images.useReadOnly pada image
    • Untuk menggunakan snapshot guna membuat VM: compute.snapshots.useReadOnly pada snapshot
    • Untuk menggunakan template instance guna membuat VM: compute.instanceTemplates.useReadOnly di template instance
    • Untuk menetapkan jaringan lama ke VM: compute.networks.use di project
    • Untuk menentukan alamat IP statis untuk VM: compute.addresses.use pada project
    • Untuk menetapkan alamat IP eksternal ke VM saat menggunakan jaringan lama: compute.networks.useExternalIp di project
    • Untuk menentukan subnet bagi VM: compute.subnetworks.use di project atau di subnet yang dipilih
    • Untuk menetapkan alamat IP eksternal ke VM saat menggunakan jaringan VPC: compute.subnetworks.useExternalIp di project atau di subnet yang dipilih
    • Untuk menetapkan metadata instance VM untuk VM: compute.instances.setMetadata pada project
    • Untuk menetapkan tag untuk VM: compute.instances.setTags di VM
    • Untuk menetapkan label untuk VM: compute.instances.setLabels di VM
    • Untuk menetapkan akun layanan yang akan digunakan VM: compute.instances.setServiceAccount di VM
    • Untuk membuat disk baru bagi VM: compute.disks.create pada project
    • Untuk memasang disk yang ada dalam mode hanya baca atau baca-tulis: compute.disks.use pada disk
    • Untuk memasang disk yang ada dalam mode hanya baca: compute.disks.useReadOnly pada disk

Anda mungkin juga bisa mendapatkan izin ini dengan peran khusus atau peran bawaan lainnya.

Batasan

  • Jika VM Anda memiliki disk SSD Lokal, Anda tidak dapat mengubah konfigurasi vCPU dan memori.
  • Memori tambahan hanya tersedia di jenis mesin kustom. Jenis mesin yang telah ditetapkan tidak didukung.
  • Ada jumlah memori maksimum yang dapat Anda tambahkan ke setiap jenis mesin.
  • Anda harus menentukan memori dalam kelipatan 256 MB.
  • Memori tambahan tidak memenuhi syarat untuk mendapatkan diskon abonemen.
  • Jenis mesin N4 dan N2D hanya tersedia di region dan zona tertentu.

Harga jenis mesin kustom

Google mengenakan biaya untuk VM kustom berdasarkan jumlah vCPU dan jam memori yang digunakan VM. Hal ini berbeda dengan model penagihan untuk jenis mesin yang telah ditetapkan. Harga on-demand untuk jenis mesin kustom mencakup premi 5% atas harga on-demand untuk jenis mesin yang telah ditetapkan.

  • Saat menggunakan jenis mesin kustom, semua memori hingga dan termasuk jumlah memori default per vCPU dikenai biaya berdasarkan harga jenis mesin kustom keluarga mesin. Jenis mesin kustom E2 dan jenis mesin kustom dengan inti bersama E2 memiliki skema harga yang sama.

  • Jika Anda menggunakan komitmen untuk menjalankan jenis mesin kustom, Compute Engine akan mengenakan premi 5% atas harga komitmen. Compute Engine mengenakan premi ini untuk bagian dan durasi komitmen Anda saat menjalankan VM jenis mesin kustom ini.

Lihat Harga instance VM untuk mengetahui informasi menurut seri mesin.

Sama seperti semua instance lainnya, biaya minimum 1 menit juga berlaku pada VM kustom, tetapi diskon untuk penggunaan berkelanjutan untuk jenis mesin kustom dihitung dengan cara berbeda. Untuk mengetahui informasi selengkapnya, lihat diskon untuk penggunaan berkelanjutan untuk VM kustom.

Harga memori tambahan

Untuk memori di atas jumlah default, Compute Engine mengenakan biaya untuk memori tambahan berdasarkan harga memori kustom tambahan untuk jenis mesin. Harga memori tambahan berbeda dengan harga memori di bawah batas default.

Harga memori tambahan dapat berbeda-beda di setiap region. Instance yang berjalan dengan memori tambahan dikenai biaya minimum 1 menit yang sama seperti semua instance lainnya. Memori tambahan juga memenuhi syarat untuk mendapatkan diskon penggunaan berkelanjutan.

Menambahkan memori tambahan ke jenis mesin

Bergantung pada seri mesin, secara default setiap jenis mesin memiliki jumlah memori tertentu. Untuk beberapa workload, jumlah memori ini mungkin tidak mencukupi. Dengan biaya tambahan, Anda bisa mendapatkan memori per vCPU yang lebih besar daripada batas default-nya. Ini disebut sebagai memori tambahan.

Dengan memori tambahan, Anda dapat menentukan jumlah memori untuk jenis mesin kustom tanpa batasan per vCPU. Daripada menggunakan ukuran memori default berdasarkan jumlah vCPU yang ditentukan, Anda dapat menentukan jumlah memori tambahan, hingga batas seri mesin.

Seri mesin Batas vCPU Batas memori
N4 80 640 GB
N2 128 640 GB
N2D 224 768 GB
E2 32 128 GB
N1 96 624 GB

Jika memerlukan memori lebih besar, gunakan salah satu jenis mesin yang dioptimalkan untuk memori, yang memungkinkan Anda membuat VM dengan total memori hingga 12 TB per VM.

Menentukan apakah Anda memerlukan memori tambahan

Workload tertentu memerlukan memori per vCPU yang lebih besar daripada jumlah default-nya agar dapat memberikan hasil yang optimal. Workload yang didasarkan pada database analisis berperforma tinggi dalam memori, termasuk database relasional dan NoSQL seperti MS SQL Server, MongoDB, dan MemcacheD/Redis, termasuk dalam kategori ini. Pemberian lisensi berbasis vCPU untuk sistem operasi dan stack software juga membuat pemilihan konfigurasi memori VM yang optimal jadi lebih menantang pada jenis mesin yang telah ditetapkan. Dengan memori tambahan, Anda dapat menambahkan memori sebanyak yang dibutuhkan VM untuk mendapatkan rasio harga-performa terbaik.

Menyatakan memori dalam GB atau MB

Untuk alat dan dokumentasi Google Cloud, memori jenis mesin dihitung dalam gigabyte (GB), di mana 1 GB sama dengan 230 byte. Unit pengukuran ini juga disebut sebagai gibibyte (GiB). Saat mengonversi memori dari GB ke MB, 1 GB = 1024 MB.

Di API, Anda harus selalu memasukkan memori dalam megabyte. Jika menggunakan Google Cloud CLI, Anda dapat menyediakan total memori untuk VM dalam gigabyte atau megabyte. Namun, gcloud CLI mengharapkan nilai memori berupa bilangan bulat, sehingga Anda tidak dapat memberikan nilai float. Misalnya, untuk menyatakan 5,75 GB, konversi 5,75 GB menjadi MB. Dalam hal ini, 5,75 GB sama dengan 5888 MB.

Membuat VM dengan jenis mesin kustom

Sebelum membuat instance VM kustom, pastikan Anda membaca spesifikasi kustom untuk membuat jenis mesin ini.

Konsol

  1. Di konsol Google Cloud, buka halaman Create an instance.

    Buka halaman Buat instance

  2. Pilih Region dan Zone tempat Anda ingin menghosting VM.

  3. Di bagian Machine configuration, pilih General-purpose.

    1. Dalam daftar Series, pilih seri mesin untuk membuat mesin kustom; N4, N2, N2D, E2, dan N1 menawarkan jenis mesin kustom.
    2. Di bagian Machine type, pilih Custom.
    3. Untuk menentukan jumlah vCPU dan memori bagi instance VM, tarik penggeser atau masukkan nilai di kotak teks. Konsol menampilkan estimasi biaya VM saat Anda mengubah jumlah vCPU dan memori.
  4. Lanjutkan untuk membuat VM.

gcloud

Buat mesin kustom menggunakan perintah gcloud compute instances create dengan opsi --machine-type.

  gcloud compute instances create INSTANCE_NAME \
    --machine-type=MACHINE_TYPE-NUMBER_OF_VCPUS-AMOUNT_OF_MEMORY_MB

Ganti kode berikut:

  • INSTANCE_NAME: nama instance
  • MACHINE_TYPE: jenis mesin, seperti N2
  • NUMBER_OF_VCPUS: jumlah vCPU
  • AMOUNT_OF_MEMORY_MB: jumlah memori dalam MB atau GB

Berikut adalah contoh penggunaan jenis mesin N2 dengan 48 vCPU dan memori 310 GB di zona us-central1-a:

  gcloud compute instances create example-instance \
    --zone=us-central1-a --machine-type=n2-custom-48-317440

Atau, Anda dapat menentukan jenis mesin kustom menggunakan opsi kustom: --custom-cpu, --custom-memory, --custom-vm-type, dan --custom-extensions. Untuk mengonfigurasi memori tambahan, yang memungkinkan Anda menentukan jumlah memori yang lebih tinggi daripada rasio maksimum memori ke vCPU, tingkatkan nilai AMOUNT_OF_MEMORY_MB dan tambahkan -ext ke nama jenis mesin.

  gcloud compute instances create INSTANCE_NAME \
        --custom-cpu=NUMBER_OF_VCPUS \
        --custom-memory=NUMBER_OF_MB \
        --custom-vm-type=MACHINE_TYPE \
        --custom-extension

Ganti kode berikut:

  • INSTANCE_NAME: nama instance
  • NUMBER_OF_VCPUS: jumlah vCPU
  • NUMBER_OF_MB: jumlah memori dalam MB atau GB
  • MACHINE_TYPE: jenis mesin, seperti N2

Contoh berikut adalah jenis mesin kustom N2 dengan 48 vCPU dan memori 310 GB menggunakan opsi Google Cloud CLI.

  gcloud compute instances create example-instance \
    --custom-cpu=48 --custom-memory=317440 --custom-extension --custom-vm-type=n2

Saat menggunakan opsi --custom-memory, tentukan jumlah total memori dalam GB atau MB. Properti ini harus berupa bilangan bulat, jadi jika Anda ingin menentukan kelipatan 0,25 GB untuk memori, konversi nilai tersebut menjadi MB.

Untuk jenis mesin kustom dengan inti bersama E2, gunakan perintah gcloud compute instances create yang sama dan sertakan ukuran mesin dengan inti bersama: micro, small, atau medium. vCPU dan memori terbatas.

  gcloud compute instances create INSTANCE_NAME\
    --machine-type=MACHINE_TYPE-AMOUNT_OF_MEMORY_MB

Ganti kode berikut:

  • INSTANCE_NAME: nama instance
  • MACHINE_TYPE: E2 small
  • AMOUNT_OF_MEMORY_MB: jumlah memori dalam MB atau GB

Contoh berikut adalah jenis mesin kustom kecil dengan inti bersama E2 dengan 0,5 vCPU dan memori 2,25 GB.

  gcloud compute instances create example-instance \
    --machine-type=e2-custom-small-2304

Terraform

Untuk membuat kode Terraform, Anda dapat menggunakan komponen Equivalent code di Konsol Google Cloud.
  1. Di Konsol Google Cloud, buka halaman Instance VM.

    Buka Instance VM

  2. Klik Create instance.
  3. Tentukan parameter yang Anda inginkan.
  4. Di bagian atas atau bawah halaman, klik Kode yang setara, lalu klik tab Terraform untuk melihat kode Terraform.

Go

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Go Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

func customMachineTypeURI(zone, cpuSeries string, coreCount, memory int) (string, error) {
	const (
		n1       = "custom"
		n2       = "n2-custom"
		n2d      = "n2d-custom"
		e2       = "e2-custom"
		e2Micro  = "e2-custom-micro"
		e2Small  = "e2-custom-small"
		e2Medium = "e2-custom-medium"
	)

	type typeLimit struct {
		allowedCores     []int
		minMemPerCore    int
		maxMemPerCore    int
		allowExtraMemory bool
		extraMemoryLimit int
	}

	makeRange := func(start, end, step int) []int {
		if step <= 0 || end < start {
			return []int{}
		}
		s := make([]int, 0, 1+(end-start)/step)
		for start <= end {
			s = append(s, start)
			start += step
		}
		return s
	}

	containsString := func(s []string, str string) bool {
		for _, v := range s {
			if v == str {
				return true
			}
		}

		return false
	}

	containsInt := func(nums []int, n int) bool {
		for _, v := range nums {
			if v == n {
				return true
			}
		}

		return false
	}

	var (
		cpuSeriesE2Limit = typeLimit{
			allowedCores:  makeRange(2, 33, 2),
			minMemPerCore: 512,
			maxMemPerCore: 8192,
		}
		cpuSeriesE2MicroLimit  = typeLimit{minMemPerCore: 1024, maxMemPerCore: 2048}
		cpuSeriesE2SmallLimit  = typeLimit{minMemPerCore: 2048, maxMemPerCore: 4096}
		cpuSeriesE2MeidumLimit = typeLimit{minMemPerCore: 4096, maxMemPerCore: 8192}
		cpuSeriesN2Limit       = typeLimit{
			allowedCores:  append(makeRange(2, 33, 2), makeRange(36, 129, 4)...),
			minMemPerCore: 512, maxMemPerCore: 8192,
			allowExtraMemory: true,
			extraMemoryLimit: 624 << 10,
		}
		cpuSeriesN2DLimit = typeLimit{
			allowedCores:  []int{2, 4, 8, 16, 32, 48, 64, 80, 96},
			minMemPerCore: 512, maxMemPerCore: 8192,
			allowExtraMemory: true,
			extraMemoryLimit: 768 << 10,
		}
		cpuSeriesN1Limit = typeLimit{
			allowedCores:     append([]int{1}, makeRange(2, 97, 2)...),
			minMemPerCore:    922,
			maxMemPerCore:    6656,
			allowExtraMemory: true,
			extraMemoryLimit: 624 << 10,
		}
	)

	typeLimitsMap := map[string]typeLimit{
		n1:       cpuSeriesN1Limit,
		n2:       cpuSeriesN2Limit,
		n2d:      cpuSeriesN2DLimit,
		e2:       cpuSeriesE2Limit,
		e2Micro:  cpuSeriesE2MicroLimit,
		e2Small:  cpuSeriesE2SmallLimit,
		e2Medium: cpuSeriesE2MeidumLimit,
	}

	if !containsString([]string{e2, n1, n2, n2d}, cpuSeries) {
		return "", fmt.Errorf("incorrect cpu type: %v", cpuSeries)
	}

	tl := typeLimitsMap[cpuSeries]

	// Check whether the requested parameters are allowed.
	// Find more information about limitations of custom machine types at:
	// https://cloud.google.com/compute/docs/general-purpose-machines#custom_machine_types

	// Check the number of cores
	if len(tl.allowedCores) > 0 && !containsInt(tl.allowedCores, coreCount) {
		return "", fmt.Errorf(
			"invalid number of cores requested. Allowed number of cores for %v is: %v",
			cpuSeries,
			tl.allowedCores,
		)
	}

	// Memory must be a multiple of 256 MB
	if memory%256 != 0 {
		return "", fmt.Errorf("requested memory must be a multiple of 256 MB")
	}

	// Check if the requested memory isn't too little
	if memory < coreCount*tl.minMemPerCore {
		return "", fmt.Errorf(
			"requested memory is too low. Minimal memory for %v is %v MB per core",
			cpuSeries,
			tl.minMemPerCore,
		)
	}

	// Check if the requested memory isn't too much
	if memory > coreCount*tl.maxMemPerCore && !tl.allowExtraMemory {
		return "", fmt.Errorf(
			"requested memory is too large.. Maximum memory allowed for %v is %v MB per core",
			cpuSeries,
			tl.maxMemPerCore,
		)
	}
	if memory > tl.extraMemoryLimit && tl.allowExtraMemory {
		return "", fmt.Errorf(
			"requested memory is too large.. Maximum memory allowed for %v is %v MB",
			cpuSeries,
			tl.extraMemoryLimit,
		)
	}

	// Return the custom machine type in form of a string acceptable by Compute Engine API.
	if containsString([]string{e2Small, e2Micro, e2Medium}, cpuSeries) {
		return fmt.Sprintf("zones/%v/machineTypes/%v-%v", zone, cpuSeries, memory), nil
	}

	if memory > coreCount*tl.maxMemPerCore {
		return fmt.Sprintf(
			"zones/%v/machineTypes/%v-%v-%v-ext",
			zone,
			cpuSeries,
			coreCount,
			memory,
		), nil
	}

	return fmt.Sprintf("zones/%v/machineTypes/%v-%v-%v", zone, cpuSeries, coreCount, memory), nil
}

// createInstanceWithCustomMachineTypeWithHelper creates a new VM instance with a custom machine type.
func createInstanceWithCustomMachineTypeWithHelper(
	w io.Writer,
	projectID, zone, instanceName, cpuSeries string,
	coreCount, memory int,
) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// cpuSeries := "e2-custom-micro" // the type of CPU you want to use"
	// coreCount := 2 // number of CPU cores you want to use.
	// memory := 256 // the amount of memory for the VM instance, in megabytes.

	machineType, err := customMachineTypeURI(zone, cpuSeries, coreCount, memory)
	if err != nil {
		return fmt.Errorf("unable to create custom machine type string: %w", err)
	}

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	req := &computepb.InsertInstanceRequest{
		Project: projectID,
		Zone:    zone,
		InstanceResource: &computepb.Instance{
			Name: proto.String(instanceName),
			Disks: []*computepb.AttachedDisk{
				{
					InitializeParams: &computepb.AttachedDiskInitializeParams{
						DiskSizeGb: proto.Int64(10),
						SourceImage: proto.String(
							"projects/debian-cloud/global/images/family/debian-12",
						),
					},
					AutoDelete: proto.Bool(true),
					Boot:       proto.Bool(true),
				},
			},
			MachineType: proto.String(machineType),
			NetworkInterfaces: []*computepb.NetworkInterface{
				{
					Name: proto.String("global/networks/default"),
				},
			},
		},
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Java Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.


import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.AttachedDiskInitializeParams;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import com.google.common.collect.ImmutableMap;
import java.io.IOException;
import java.util.Arrays;
import java.util.Collections;
import java.util.Map;
import java.util.Objects;
import java.util.concurrent.ConcurrentHashMap;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;
import java.util.stream.IntStream;

public class CreateWithHelper {

  // This class defines the configurable parameters for a custom VM.
  static final class TypeLimits {

    int[] allowedCores;
    int minMemPerCore;
    int maxMemPerCore;
    int extraMemoryLimit;
    boolean allowExtraMemory;

    TypeLimits(int[] allowedCores, int minMemPerCore, int maxMemPerCore, boolean allowExtraMemory,
        int extraMemoryLimit) {
      this.allowedCores = allowedCores;
      this.minMemPerCore = minMemPerCore;
      this.maxMemPerCore = maxMemPerCore;
      this.allowExtraMemory = allowExtraMemory;
      this.extraMemoryLimit = extraMemoryLimit;
    }
  }

  public enum CpuSeries {
    N1("custom"),
    N2("n2-custom"),
    N2D("n2d-custom"),
    E2("e2-custom"),
    E2_MICRO("e2-custom-micro"),
    E2_SMALL("e2-custom-small"),
    E2_MEDIUM("e2-custom-medium");

    private static final Map<String, CpuSeries> ENUM_MAP;

    static {
      ENUM_MAP = init();
    }

    // Build an immutable map of String name to enum pairs.
    public static Map<String, CpuSeries> init() {
      Map<String, CpuSeries> map = new ConcurrentHashMap<>();
      for (CpuSeries instance : CpuSeries.values()) {
        map.put(instance.getCpuSeries(), instance);
      }
      return Collections.unmodifiableMap(map);
    }

    private final String cpuSeries;

    CpuSeries(String cpuSeries) {
      this.cpuSeries = cpuSeries;
    }

    public static CpuSeries get(String name) {
      return ENUM_MAP.get(name);
    }

    public String getCpuSeries() {
      return this.cpuSeries;
    }
  }

  // This enum correlates a machine type with its limits.
  // The limits for various CPU types are described in:
  // https://cloud.google.com/compute/docs/general-purpose-machines
  enum Limits {
    CPUSeries_E2(new TypeLimits(getNumsInRangeWithStep(2, 33, 2), 512, 8192, false, 0)),
    CPUSeries_E2MICRO(new TypeLimits(new int[]{}, 1024, 2048, false, 0)),
    CPUSeries_E2SMALL(new TypeLimits(new int[]{}, 2048, 4096, false, 0)),
    CPUSeries_E2MEDIUM(new TypeLimits(new int[]{}, 4096, 8192, false, 0)),
    CPUSeries_N2(
        new TypeLimits(concat(getNumsInRangeWithStep(2, 33, 2), getNumsInRangeWithStep(36, 129, 4)),
            512, 8192, true, gbToMb(624))),
    CPUSeries_N2D(
        new TypeLimits(new int[]{2, 4, 8, 16, 32, 48, 64, 80, 96}, 512, 8192, true, gbToMb(768))),
    CPUSeries_N1(
        new TypeLimits(concat(new int[]{1}, getNumsInRangeWithStep(2, 97, 2)), 922, 6656, true,
            gbToMb(624)));

    private final TypeLimits typeLimits;

    Limits(TypeLimits typeLimits) {
      this.typeLimits = typeLimits;
    }

    public TypeLimits getTypeLimits() {
      return typeLimits;
    }
  }

  static ImmutableMap<String, Limits> typeLimitsMap = ImmutableMap.<String, Limits>builder()
      .put("N1", Limits.CPUSeries_N1)
      .put("N2", Limits.CPUSeries_N2)
      .put("N2D", Limits.CPUSeries_N2D)
      .put("E2", Limits.CPUSeries_E2)
      .put("E2_MICRO", Limits.CPUSeries_E2MICRO)
      .put("E2_SMALL", Limits.CPUSeries_E2SMALL)
      .put("E2_MEDIUM", Limits.CPUSeries_E2SMALL)
      .build();

  // Returns the array of integers within the given range, incremented by the specified step.
  // start (inclusive): starting number of the range
  // stop (inclusive): ending number of the range
  // step : increment value
  static int[] getNumsInRangeWithStep(int start, int stop, int step) {
    return IntStream.range(start, stop).filter(x -> (x - start) % step == 0).toArray();
  }

  static int gbToMb(int value) {
    return value << 10;
  }

  static int[] concat(int[] a, int[] b) {
    int[] result = new int[a.length + b.length];
    System.arraycopy(a, 0, result, 0, a.length);
    System.arraycopy(b, 0, result, a.length, b.length);
    return result;
  }

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample.
    // Project ID or project number of the Cloud project you want to use.
    String projectId = "your-google-cloud-project-id";
    // Name of the zone to create the instance in. For example: "us-west3-b".
    String zone = "google-cloud-zone";
    // Name of the new virtual machine (VM) instance.
    String instanceName = "instance-name";
    String cpuSeries = "N1";
    // Number of CPU cores you want to use.
    int coreCount = 2;
    // The amount of memory for the VM instance, in megabytes.
    int memory = 256;

    createInstanceWithCustomMachineTypeWithHelper(
        projectId, zone, instanceName, cpuSeries, coreCount, memory);
  }

  // Create a VM instance with a custom machine type.
  public static void createInstanceWithCustomMachineTypeWithHelper(
      String project, String zone, String instanceName, String cpuSeries, int coreCount, int memory)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // Construct the URI string identifying the machine type.
    String machineTypeUri = customMachineTypeUri(zone, cpuSeries, coreCount, memory);

    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the `instancesClient.close()` method on the client to safely
    // clean up any remaining background resources.
    try (InstancesClient instancesClient = InstancesClient.create()) {

      AttachedDisk attachedDisk = AttachedDisk.newBuilder()
          .setInitializeParams(
              // Describe the size and source image of the boot disk to attach to the instance.
              // The list of public images available in Compute Engine can be found here:
              // https://cloud.google.com/compute/docs/images#list_of_public_images_available_on
              AttachedDiskInitializeParams.newBuilder()
                  .setSourceImage(
                      String.format("projects/%s/global/images/family/%s", "debian-cloud",
                          "debian-11"))
                  .setDiskSizeGb(10)
                  .build()
          )
          // Remember to set auto_delete to True if you want the disk to be deleted when you delete
          // your VM instance.
          .setAutoDelete(true)
          .setBoot(true)
          .build();

      // Create the Instance object with the relevant information.
      Instance instance = Instance.newBuilder()
          .setName(instanceName)
          .addDisks(attachedDisk)
          .setMachineType(machineTypeUri)
          .addNetworkInterfaces(
              NetworkInterface.newBuilder().setName("global/networks/default").build())
          .build();

      // Create the insert instance request object.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(project)
          .setZone(zone)
          .setInstanceResource(instance)
          .build();

      // Invoke the API with the request object and wait for the operation to complete.
      Operation response = instancesClient.insertAsync(insertInstanceRequest)
          .get(3, TimeUnit.MINUTES);

      // Check for errors.
      if (response.hasError()) {
        throw new Error("Instance creation failed!!" + response);
      }
      System.out.printf("Instance created : %s", instanceName);
      System.out.println("Operation Status: " + response.getStatus());
    }
  }

  public static String customMachineTypeUri(String zone, String cpuSeries, int coreCount,
      int memory) {

    if (!Arrays.asList(CpuSeries.E2.cpuSeries, CpuSeries.N1.cpuSeries, CpuSeries.N2.cpuSeries,
        CpuSeries.N2D.cpuSeries).contains(cpuSeries)) {
      throw new Error(String.format("Incorrect cpu type: %s", cpuSeries));
    }

    TypeLimits typeLimit = Objects.requireNonNull(
        typeLimitsMap.get(CpuSeries.get(cpuSeries).name())).typeLimits;

    // Perform the following checks to verify if the requested parameters are allowed.
    // Find more information about limitations of custom machine types at:
    // https://cloud.google.com/compute/docs/general-purpose-machines#custom_machine_types

    // 1. Check the number of cores and if the coreCount is present in allowedCores.
    if (typeLimit.allowedCores.length > 0 && Arrays.stream(typeLimit.allowedCores)
        .noneMatch(x -> x == coreCount)) {
      throw new Error(String.format(
          "Invalid number of cores requested. "
              + "Number of cores requested for CPU %s should be one of: %s",
          cpuSeries,
          Arrays.toString(typeLimit.allowedCores)));
    }

    // 2. Memory must be a multiple of 256 MB
    if (memory % 256 != 0) {
      throw new Error("Requested memory must be a multiple of 256 MB");
    }

    // 3. Check if the requested memory isn't too little
    if (memory < coreCount * typeLimit.minMemPerCore) {
      throw new Error(
          String.format("Requested memory is too low. Minimum memory for %s is %s MB per core",
              cpuSeries, typeLimit.minMemPerCore));
    }

    // 4. Check if the requested memory isn't too much
    if (memory > coreCount * typeLimit.maxMemPerCore && !typeLimit.allowExtraMemory) {
      throw new Error(String.format(
          "Requested memory is too large.. Maximum memory allowed for %s is %s MB per core",
          cpuSeries, typeLimit.extraMemoryLimit));
    }

    // 5. Check if the requested memory isn't too large
    if (memory > typeLimit.extraMemoryLimit && typeLimit.allowExtraMemory) {
      throw new Error(
          String.format("Requested memory is too large.. Maximum memory allowed for %s is %s MB",
              cpuSeries, typeLimit.extraMemoryLimit));
    }

    // Check if the CPU Series is E2 and return the custom machine type in the form of a string
    // acceptable by Compute Engine API.
    if (Arrays.asList(CpuSeries.E2_SMALL.cpuSeries, CpuSeries.E2_MICRO.cpuSeries,
        CpuSeries.E2_MEDIUM.cpuSeries).contains(cpuSeries)) {
      return String.format("zones/%s/machineTypes/%s-%s", zone, cpuSeries, memory);
    }

    // Check if extended memory was requested and return the extended custom machine type
    // in the form of a string acceptable by Compute Engine API.
    if (memory > coreCount * typeLimit.maxMemPerCore) {
      return String.format("zones/%s/machineTypes/%s-%s-%s-ext", zone, cpuSeries, coreCount,
          memory);
    }

    // Return the custom machine type in the form of a standard string
    // acceptable by Compute Engine API.
    return String.format("zones/%s/machineTypes/%s-%s-%s", zone, cpuSeries, coreCount, memory);
  }
}

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Node.js Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const cpuSeries = 'N1';
// const coreCount = 2
// const memory = 256

const compute = require('@google-cloud/compute');

function range(from, to, step) {
  return [...Array(Math.floor((to - from) / step) + 1)].map(
    (_, i) => from + i * step
  );
}

class CustomMachineType {
  constructor(zone, cpuSeries, coreCount, memory) {
    this.zone = zone;
    this.cpuSeries = cpuSeries;
    this.coreCount = coreCount;
    this.memory = memory;

    this.N1 = 'custom';
    this.N2 = 'n2-custom';
    this.N2D = 'n2d-custom';
    this.E2 = 'e2-custom';
    this.E2Micro = 'e2-custom-micro';
    this.E2Small = 'e2-custom-small';
    this.E2Medium = 'e2-custom-medium';

    this.CpuSeriesE2Limit = {
      allowedCores: range(2, 33, 2),
      minMemPerCore: 512,
      maxMemPerCore: 8192,
      allowExtraMemory: false,
      extraMemoryLimit: 0,
    };

    this.CpuSeriesE2MicroLimit = {
      allowedCores: [],
      minMemPerCore: 1024,
      maxMemPerCore: 2048,
      allowExtraMemory: false,
      extraMemoryLimit: 0,
    };

    this.CpuSeriesE2SmallLimit = {
      allowedCores: [],
      minMemPerCore: 2048,
      maxMemPerCore: 4096,
      allowExtraMemory: false,
      extraMemoryLimit: 0,
    };

    this.CpuSeriesE2MediumLimit = {
      allowedCores: [],
      minMemPerCore: 4096,
      maxMemPerCore: 8192,
      allowExtraMemory: false,
      extraMemoryLimit: 0,
    };

    this.CpuSeriesN2Limit = {
      allowedCores: [...range(2, 33, 2), ...range(36, 129, 4)],
      minMemPerCore: 512,
      maxMemPerCore: 8192,
      allowExtraMemory: true,
      extraMemoryLimit: 624 << 10,
    };

    this.CpuSeriesN2DLimit = {
      allowedCores: [2, 4, 8, 16, 32, 48, 64, 80, 96],
      minMemPerCore: 512,
      maxMemPerCore: 8192,
      allowExtraMemory: true,
      extraMemoryLimit: 768 << 10,
    };

    this.CpuSeriesN1Limit = {
      allowedCores: [1, range(2, 97, 2)],
      minMemPerCore: 922,
      maxMemPerCore: 6656,
      allowExtraMemory: true,
      extraMemoryLimit: 624 << 10,
    };

    this.TYPE_LIMITS = {
      [this.N1]: this.CpuSeriesN1Limit,
      [this.N2]: this.CpuSeriesN2Limit,
      [this.N2D]: this.CpuSeriesN2DLimit,
      [this.E2]: this.CpuSeriesE2Limit,
      [this.E2Micro]: this.CpuSeriesE2MicroLimit,
      [this.E2Small]: this.CpuSeriesE2SmallLimit,
      [this.E2Medium]: this.CpuSeriesE2MediumLimit,
    };

    if (![this.E2, this.N1, this.N2, this.N2D].includes(cpuSeries)) {
      throw new Error(`Incorrect CPU type: ${this.cpuSeries}`);
    }

    this.typeLimit = this.TYPE_LIMITS[this.cpuSeries];

    // Check whether the requested parameters are allowed.
    // Find more information about limitations of custom machine types at:
    // https://cloud.google.com/compute/docs/general-purpose-machines#custom_machine_types

    // Check the number of cores
    if (
      this.typeLimit.allowedCores.length > 0 &&
      !this.typeLimit.allowedCores.includes(coreCount)
    ) {
      throw new Error(
        `Invalid number of cores requested. Allowed number of cores for ${this.cpuSeries} is: ${this.typeLimit.allowedCores}`
      );
    }

    // Memory must be a multiple of 256 MB
    if (this.memory % 256 !== 0) {
      throw new Error('Requested memory must be a multiple of 256 MB');
    }

    // Check if the requested memory isn't too little
    if (this.memory < this.coreCount * this.typeLimit.minMemPerCore) {
      throw new Error(
        `Requested memory is too low. Minimal memory for ${this.cpuSeries} is ${this.typeLimit.minMemPerCore} MB per core`
      );
    }

    // Check if the requested memory isn't too much
    if (
      this.memory > this.coreCount * this.typeLimit.maxMemPerCore &&
      !this.typeLimit.allowExtraMemory
    ) {
      throw new Error(
        `Requested memory is too large.. Maximum memory allowed for ${this.cpuSeries} is ${this.typeLimit.maxMemPerCore} MB per core`
      );
    }

    if (
      this.memory > this.typeLimit.extraMemoryLimit &&
      this.typeLimit.allowExtraMemory
    ) {
      throw new Error(
        `Requested memory is too large.. Maximum memory allowed for ${this.cpuSeries} is ${this.typeLimit.extraMemoryLimit} MB`
      );
    }
  }

  // Returns the custom machine type in form of a string acceptable by Compute Engine API.
  getMachineTypeURI() {
    if (
      [this.E2Small, this.E2Micro, this.E2Medium].includes(this.cpuSeries)
    ) {
      return `zones/${this.zone}/machineTypes/${this.cpuSeries}-${this.memory}`;
    }

    if (this.memory > this.coreCount * this.typeLimit.maxMemPerCore) {
      return `zones/${this.zone}/machineTypes/${this.cpuSeries}-${this.coreCount}-${this.memory}-ext`;
    }

    return `zones/${zone}/machineTypes/${this.cpuSeries}-${this.coreCount}-${this.memory}`;
  }
}

async function createInstanceWithCustomMachineTypeWithHelper() {
  const instancesClient = new compute.InstancesClient();

  const machineType = new CustomMachineType(
    zone,
    cpuSeries,
    coreCount,
    memory
  ).getMachineTypeURI();

  const [response] = await instancesClient.insert({
    instanceResource: {
      name: instanceName,
      disks: [
        {
          initializeParams: {
            diskSizeGb: '64',
            sourceImage:
              'projects/debian-cloud/global/images/family/debian-11/',
          },
          autoDelete: true,
          boot: true,
        },
      ],
      machineType,
      networkInterfaces: [
        {
          name: 'global/networks/default',
        },
      ],
    },
    project: projectId,
    zone,
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createInstanceWithCustomMachineTypeWithHelper();

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Python Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

from __future__ import annotations

from collections import namedtuple
from enum import Enum
from enum import unique
import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def gb_to_mb(value: int) -> int:
    return value << 10


class CustomMachineType:
    """
    Allows to create custom machine types to be used with the VM instances.
    """

    @unique
    class CPUSeries(Enum):
        N1 = "custom"
        N2 = "n2-custom"
        N2D = "n2d-custom"
        E2 = "e2-custom"
        E2_MICRO = "e2-custom-micro"
        E2_SMALL = "e2-custom-small"
        E2_MEDIUM = "e2-custom-medium"

    TypeLimits = namedtuple(
        "TypeLimits",
        [
            "allowed_cores",
            "min_mem_per_core",
            "max_mem_per_core",
            "allow_extra_memory",
            "extra_memory_limit",
        ],
    )

    # The limits for various CPU types are described on:
    # https://cloud.google.com/compute/docs/general-purpose-machines
    LIMITS = {
        CPUSeries.E2: TypeLimits(frozenset(range(2, 33, 2)), 512, 8192, False, 0),
        CPUSeries.E2_MICRO: TypeLimits(frozenset(), 1024, 2048, False, 0),
        CPUSeries.E2_SMALL: TypeLimits(frozenset(), 2048, 4096, False, 0),
        CPUSeries.E2_MEDIUM: TypeLimits(frozenset(), 4096, 8192, False, 0),
        CPUSeries.N2: TypeLimits(
            frozenset(range(2, 33, 2)).union(set(range(36, 129, 4))),
            512,
            8192,
            True,
            gb_to_mb(624),
        ),
        CPUSeries.N2D: TypeLimits(
            frozenset({2, 4, 8, 16, 32, 48, 64, 80, 96}), 512, 8192, True, gb_to_mb(768)
        ),
        CPUSeries.N1: TypeLimits(
            frozenset({1}.union(range(2, 97, 2))), 922, 6656, True, gb_to_mb(624)
        ),
    }

    def __init__(
        self, zone: str, cpu_series: CPUSeries, memory_mb: int, core_count: int = 0
    ):
        self.zone = zone
        self.cpu_series = cpu_series
        self.limits = self.LIMITS[self.cpu_series]
        # Shared machine types (e2-small, e2-medium and e2-micro) always have
        # 2 vCPUs: https://cloud.google.com/compute/docs/general-purpose-machines#e2_limitations
        self.core_count = 2 if self.is_shared() else core_count
        self.memory_mb = memory_mb
        self._checked = False
        self._check_parameters()
        self.extra_memory_used = self._check_extra_memory()

    def is_shared(self):
        return self.cpu_series in (
            CustomMachineType.CPUSeries.E2_SMALL,
            CustomMachineType.CPUSeries.E2_MICRO,
            CustomMachineType.CPUSeries.E2_MEDIUM,
        )

    def _check_extra_memory(self) -> bool:
        if self._checked:
            return self.memory_mb > self.core_count * self.limits.max_mem_per_core
        else:
            raise RuntimeError(
                "You need to call _check_parameters() before calling _check_extra_memory()"
            )

    def _check_parameters(self):
        """
        Check whether the requested parameters are allowed. Find more information about limitations of custom machine
        types at: https://cloud.google.com/compute/docs/general-purpose-machines#custom_machine_types
        """
        # Check the number of cores
        if (
            self.limits.allowed_cores
            and self.core_count not in self.limits.allowed_cores
        ):
            raise RuntimeError(
                f"Invalid number of cores requested. Allowed number of cores for {self.cpu_series.name} is: {sorted(self.limits.allowed_cores)}"
            )

        # Memory must be a multiple of 256 MB
        if self.memory_mb % 256 != 0:
            raise RuntimeError("Requested memory must be a multiple of 256 MB.")

        # Check if the requested memory isn't too little
        if self.memory_mb < self.core_count * self.limits.min_mem_per_core:
            raise RuntimeError(
                f"Requested memory is too low. Minimal memory for {self.cpu_series.name} is {self.limits.min_mem_per_core} MB per core."
            )

        # Check if the requested memory isn't too much
        if self.memory_mb > self.core_count * self.limits.max_mem_per_core:
            if self.limits.allow_extra_memory:
                if self.memory_mb > self.limits.extra_memory_limit:
                    raise RuntimeError(
                        f"Requested memory is too large.. Maximum memory allowed for {self.cpu_series.name} is {self.limits.extra_memory_limit} MB."
                    )
            else:
                raise RuntimeError(
                    f"Requested memory is too large.. Maximum memory allowed for {self.cpu_series.name} is {self.limits.max_mem_per_core} MB per core."
                )

        self._checked = True

    def __str__(self) -> str:
        """
        Return the custom machine type in form of a string acceptable by Compute Engine API.
        """
        if self.cpu_series in {
            self.CPUSeries.E2_SMALL,
            self.CPUSeries.E2_MICRO,
            self.CPUSeries.E2_MEDIUM,
        }:
            return f"zones/{self.zone}/machineTypes/{self.cpu_series.value}-{self.memory_mb}"

        if self.extra_memory_used:
            return f"zones/{self.zone}/machineTypes/{self.cpu_series.value}-{self.core_count}-{self.memory_mb}-ext"

        return f"zones/{self.zone}/machineTypes/{self.cpu_series.value}-{self.core_count}-{self.memory_mb}"

    def short_type_str(self) -> str:
        """
        Return machine type in a format without the zone. For example, n2-custom-0-10240.
        This format is used to create instance templates.
        """
        return str(self).rsplit("/", maxsplit=1)[1]

    @classmethod
    def from_str(cls, machine_type: str):
        """
        Construct a new object from a string. The string needs to be a valid custom machine type like:
         - https://www.googleapis.com/compute/v1/projects/diregapic-mestiv/zones/us-central1-b/machineTypes/e2-custom-4-8192
         - zones/us-central1-b/machineTypes/e2-custom-4-8192
         - e2-custom-4-8192 (in this case, the zone parameter will not be set)
        """
        zone = None
        if machine_type.startswith("http"):
            machine_type = machine_type[machine_type.find("zones/") :]

        if machine_type.startswith("zones/"):
            _, zone, _, machine_type = machine_type.split("/")

        extra_mem = machine_type.endswith("-ext")

        if machine_type.startswith("custom"):
            cpu = cls.CPUSeries.N1
            _, cores, memory = machine_type.rsplit("-", maxsplit=2)
        else:
            if extra_mem:
                cpu_series, _, cores, memory, _ = machine_type.split("-")
            else:
                cpu_series, _, cores, memory = machine_type.split("-")
            if cpu_series == "n2":
                cpu = cls.CPUSeries.N2
            elif cpu_series == "n2d":
                cpu = cls.CPUSeries.N2D
            elif cpu_series == "e2":
                cpu = cls.CPUSeries.E2
                if cores == "micro":
                    cpu = cls.CPUSeries.E2_MICRO
                    cores = 2
                elif cores == "small":
                    cpu = cls.CPUSeries.E2_SMALL
                    cores = 2
                elif cores == "medium":
                    cpu = cls.CPUSeries.E2_MEDIUM
                    cores = 2
            else:
                raise RuntimeError("Unknown CPU series.")

        cores = int(cores)
        memory = int(memory)

        return cls(zone, cpu, memory, cores)


def get_image_from_family(project: str, family: str) -> compute_v1.Image:
    """
    Retrieve the newest image that is part of a given family in a project.

    Args:
        project: project ID or project number of the Cloud project you want to get image from.
        family: name of the image family you want to get image from.

    Returns:
        An Image object.
    """
    image_client = compute_v1.ImagesClient()
    # List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details
    newest_image = image_client.get_from_family(project=project, family=family)
    return newest_image


def disk_from_image(
    disk_type: str,
    disk_size_gb: int,
    boot: bool,
    source_image: str,
    auto_delete: bool = True,
) -> compute_v1.AttachedDisk:
    """
    Create an AttachedDisk object to be used in VM instance creation. Uses an image as the
    source for the new disk.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        source_image: source image to use when creating this disk. You must have read access to this disk. This can be one
            of the publicly available images or an image from one of your projects.
            This value uses the following format: "projects/{project_name}/global/images/{image_name}"
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created using the specified image.
    """
    boot_disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.source_image = source_image
    initialize_params.disk_size_gb = disk_size_gb
    initialize_params.disk_type = disk_type
    boot_disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    boot_disk.auto_delete = auto_delete
    boot_disk.boot = boot
    return boot_disk


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)


def create_custom_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    cpu_series: CustomMachineType.CPUSeries,
    core_count: int,
    memory: int,
) -> compute_v1.Instance:
    """
    Create a new VM instance with a custom machine type.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        cpu_series: the type of CPU you want to use. Select one value from the CustomMachineType.CPUSeries enum.
            For example: CustomMachineType.CPUSeries.N2
        core_count: number of CPU cores you want to use.
        memory: the amount of memory for the VM instance, in megabytes.

    Return:
        Instance object.
    """
    assert cpu_series in (
        CustomMachineType.CPUSeries.E2,
        CustomMachineType.CPUSeries.N1,
        CustomMachineType.CPUSeries.N2,
        CustomMachineType.CPUSeries.N2D,
    )
    custom_type = CustomMachineType(zone, cpu_series, memory, core_count)

    newest_debian = get_image_from_family(project="debian-cloud", family="debian-12")
    disk_type = f"zones/{zone}/diskTypes/pd-standard"
    disks = [disk_from_image(disk_type, 10, True, newest_debian.self_link)]

    return create_instance(project_id, zone, instance_name, disks, str(custom_type))

REST

Dengan metode instances.insert, buat permintaan pembuatan instance dan tentukan nilai machineType kustom. Masukkan memori dalam MB.

  • Untuk seri mesin N1, mulai dengan kustom.
  • Untuk core bersama E2, NUMBER_OF_CPUs adalah micro, small, atau medium.
  • Untuk mengaktifkan memori tambahan, sertakan -ext di akhir jenis mesin.

POST https://compute.googleapis.com/compute/v1/projects/PROJECT_ID/zones/ZONE/instances

Contoh isi permintaan

      {
    "name": "exampleinstance",
    "machineType": "zones/us-central1-a/machineTypes/n2-custom-16-107520",
    "disks": [
      {
        "boot": true,
        "diskSizeGb": 10,
        "initializeParams": {
          "sourceImage": "projects/debian-cloud/global/images/family/debian-11"
        }
      }
    ],
    "networkInterfaces": [
      {
        "network": "global/networks/default"
      }
    ]
  }
```

Anda juga dapat membuat preemptible instance dan grup instance dengan jenis mesin kustom.

Menambahkan memori tambahan selama pembuatan instance

Untuk membuat instance VM dengan memori tambahan, lakukan hal berikut:

Konsol

  1. Di konsol Google Cloud, buka halaman Create an instance.

    Buka halaman Create an instance

  2. Di daftar Zone, pilih zona tempat Anda ingin menghosting VM ini. Daftar Series difilter agar hanya menyertakan kelompok jenis mesin yang tersedia di zona yang dipilih.

  3. Di bagian Machine configuration, pilih General-purpose.

    1. Dalam daftar Series, pilih N4, N2, N2D, E2, atau N1 untuk membuat jenis mesin kustom.
    2. Untuk menentukan jumlah vCPU, tarik penggeser Cores atau masukkan nilai di kolom. Untuk inti bersama E2, centang kotak.
    3. Untuk menambahkan memori tambahan, pilih Extend memory. Untuk menentukan jumlah memori untuk jenis mesin, tarik penggeser Memory atau masukkan nilai di kolom. Konsol menampilkan estimasi biaya VM saat Anda mengedit jumlah vCPU dan memori.
  4. Lanjutkan pembuatan VM.

gcloud

Buat mesin kustom menggunakan perintah gcloud compute instances create dengan opsi --machine-type.

  gcloud compute instances create  INSTANCE_NAME\
    --machine-type=MACHINE_TYPE-NUMBER_OF_VCPUS-AMOUNT_OF_MEMORY_MB

Ganti kode berikut:

  • INSTANCE_NAME: nama instance
  • MACHINE_TYPE: jenis mesin, seperti N2
  • NUMBER_OF_VCPUS: jumlah vCPU
  • AMOUNT_OF_MEMORY_MB: jumlah memori dalam MB atau GB

Berikut adalah contoh penggunaan jenis mesin N2 dengan 48 vCPU dan memori 310 GB di zona us-central1-a:

  gcloud compute instances create example-instance \
    --zone=us-central1-a --machine-type=n2-custom-48-317440

Untuk jenis mesin dengan inti bersama E2 kustom, gunakan opsi --machine-type, dan tunjukkan jenis mesin: micro, small, atau medium, lalu masukkan jumlah memori dalam MB atau GB.

Go

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Go Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

import (
	"context"
	"fmt"
	"io"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// createInstanceWithExtraMemWithoutHelper сreates new VM instances with extra memory
// without using a CustomMachineType struct.
func createInstanceWithExtraMemWithoutHelper(
	w io.Writer,
	projectID, zone, instanceName, cpuSeries string,
	coreCount, memory int,
) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// cpuSeries := "N1"
	// coreCount := 2 // number of CPU cores you want to use.
	// memory := 256 // the amount of memory for the VM instance, in megabytes.

	// The coreCount and memory values are not validated anywhere and can be rejected by the API.

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	mt := fmt.Sprintf("zones/%s/machineTypes/%v-%v-%v-ext", zone, cpuSeries, coreCount, memory)
	inst := &computepb.Instance{
		Name: proto.String(instanceName),
		Disks: []*computepb.AttachedDisk{
			{
				InitializeParams: &computepb.AttachedDiskInitializeParams{
					DiskSizeGb: proto.Int64(10),
					SourceImage: proto.String(
						"projects/debian-cloud/global/images/family/debian-12",
					),
				},
				AutoDelete: proto.Bool(true),
				Boot:       proto.Bool(true),
			},
		},
		MachineType: proto.String(mt),
		NetworkInterfaces: []*computepb.NetworkInterface{
			{
				Name: proto.String("global/networks/default"),
			},
		},
	}

	req := &computepb.InsertInstanceRequest{
		Project:          projectID,
		Zone:             zone,
		InstanceResource: inst,
	}

	op, err := instancesClient.Insert(ctx, req)
	if err != nil {
		return fmt.Errorf("unable to create instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance created\n")

	return nil
}

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Java Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.


import com.google.cloud.compute.v1.AttachedDisk;
import com.google.cloud.compute.v1.AttachedDiskInitializeParams;
import com.google.cloud.compute.v1.InsertInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.NetworkInterface;
import com.google.cloud.compute.v1.Operation;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class ExtraMemoryWithoutHelper {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample.
    // Project ID or project number of the Cloud project you want to use.
    String projectId = "your-google-cloud-project-id";
    // Name of the zone to create the instance in. For example: "us-west3-b".
    String zone = "google-cloud-zone";
    // Name of the new virtual machine (VM) instance.
    String instanceName = "instance-name";
    String cpuSeries = "N1";
    // Number of CPU cores you want to use.
    int coreCount = 2;
    // The amount of memory for the VM instance, in megabytes.
    int memory = 256;

    createInstanceWithExtraMemoryWithoutHelper(projectId, zone, instanceName, cpuSeries, coreCount,
        memory);
  }

  // Create VM instances with extra memory without using a CustomMachineType class and
  // return the created Instance.
  public static void createInstanceWithExtraMemoryWithoutHelper(
      String project, String zone, String instanceName, String cpuSeries, int coreCount, int memory)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the `instancesClient.close()` method on the client to safely
    // clean up any remaining background resources.
    try (InstancesClient instancesClient = InstancesClient.create()) {

      // The coreCount and memory values are not validated anywhere and can be rejected by the API.
      String machineType = String.format("zones/%s/machineTypes/%s-%s-%s-ext", zone, cpuSeries,
          coreCount, memory);

      AttachedDisk attachedDisk = AttachedDisk.newBuilder()
          .setInitializeParams(
              // Describe the size and source image of the boot disk to attach to the instance.
              // The list of public images available in Compute Engine can be found here:
              // https://cloud.google.com/compute/docs/images#list_of_public_images_available_on
              AttachedDiskInitializeParams.newBuilder()
                  .setSourceImage(
                      String.format("projects/%s/global/images/family/%s", "debian-cloud",
                          "debian-11"))
                  .setDiskSizeGb(10)
                  .build()
          )
          // Remember to set auto_delete to True if you want the disk to be deleted when you delete
          // your VM instance.
          .setAutoDelete(true)
          .setBoot(true)
          .build();

      // Create the Instance object with the relevant information.
      Instance instance = Instance.newBuilder()
          .setName(instanceName)
          .addDisks(attachedDisk)
          .setMachineType(machineType)
          .addNetworkInterfaces(
              NetworkInterface.newBuilder().setName("global/networks/default").build())
          .build();

      // Create the insert instance request object.
      InsertInstanceRequest insertInstanceRequest = InsertInstanceRequest.newBuilder()
          .setProject(project)
          .setZone(zone)
          .setInstanceResource(instance)
          .build();

      // Invoke the API with the request object and wait for the operation to complete.
      Operation response = instancesClient.insertAsync(insertInstanceRequest)
          .get(3, TimeUnit.MINUTES);

      // Check for errors.
      if (response.hasError()) {
        System.out.println("Instance creation failed!!" + response);
        return;
      }
      System.out.printf("Instance created : %s", instanceName);
      System.out.println("Operation Status: " + response.getStatus());
    }
  }
}

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Node.js Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const cpuSeries = 'N1';
// const coreCount = 2
// const memory = 256

// The coreCount and memory values are not validated anywhere and can be rejected by the API.

const compute = require('@google-cloud/compute');

async function createInstanceWithExtraMemWithoutHelper() {
  const instancesClient = new compute.InstancesClient();

  const machineType = `zones/${zone}/machineTypes/${cpuSeries}-${coreCount}-${memory}-ext`;

  const [response] = await instancesClient.insert({
    instanceResource: {
      name: instanceName,
      disks: [
        {
          initializeParams: {
            diskSizeGb: '64',
            sourceImage:
              'projects/debian-cloud/global/images/family/debian-11/',
          },
          autoDelete: true,
          boot: true,
        },
      ],
      machineType,
      networkInterfaces: [
        {
          name: 'global/networks/default',
        },
      ],
    },
    project: projectId,
    zone,
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the create operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance created.');
}

createInstanceWithExtraMemWithoutHelper();

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Python Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

from __future__ import annotations

import re
import sys
from typing import Any
import warnings

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def get_image_from_family(project: str, family: str) -> compute_v1.Image:
    """
    Retrieve the newest image that is part of a given family in a project.

    Args:
        project: project ID or project number of the Cloud project you want to get image from.
        family: name of the image family you want to get image from.

    Returns:
        An Image object.
    """
    image_client = compute_v1.ImagesClient()
    # List of public operating system (OS) images: https://cloud.google.com/compute/docs/images/os-details
    newest_image = image_client.get_from_family(project=project, family=family)
    return newest_image


def disk_from_image(
    disk_type: str,
    disk_size_gb: int,
    boot: bool,
    source_image: str,
    auto_delete: bool = True,
) -> compute_v1.AttachedDisk:
    """
    Create an AttachedDisk object to be used in VM instance creation. Uses an image as the
    source for the new disk.

    Args:
         disk_type: the type of disk you want to create. This value uses the following format:
            "zones/{zone}/diskTypes/(pd-standard|pd-ssd|pd-balanced|pd-extreme)".
            For example: "zones/us-west3-b/diskTypes/pd-ssd"
        disk_size_gb: size of the new disk in gigabytes
        boot: boolean flag indicating whether this disk should be used as a boot disk of an instance
        source_image: source image to use when creating this disk. You must have read access to this disk. This can be one
            of the publicly available images or an image from one of your projects.
            This value uses the following format: "projects/{project_name}/global/images/{image_name}"
        auto_delete: boolean flag indicating whether this disk should be deleted with the VM that uses it

    Returns:
        AttachedDisk object configured to be created using the specified image.
    """
    boot_disk = compute_v1.AttachedDisk()
    initialize_params = compute_v1.AttachedDiskInitializeParams()
    initialize_params.source_image = source_image
    initialize_params.disk_size_gb = disk_size_gb
    initialize_params.disk_type = disk_type
    boot_disk.initialize_params = initialize_params
    # Remember to set auto_delete to True if you want the disk to be deleted when you delete
    # your VM instance.
    boot_disk.auto_delete = auto_delete
    boot_disk.boot = boot
    return boot_disk


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def create_instance(
    project_id: str,
    zone: str,
    instance_name: str,
    disks: list[compute_v1.AttachedDisk],
    machine_type: str = "n1-standard-1",
    network_link: str = "global/networks/default",
    subnetwork_link: str = None,
    internal_ip: str = None,
    external_access: bool = False,
    external_ipv4: str = None,
    accelerators: list[compute_v1.AcceleratorConfig] = None,
    preemptible: bool = False,
    spot: bool = False,
    instance_termination_action: str = "STOP",
    custom_hostname: str = None,
    delete_protection: bool = False,
) -> compute_v1.Instance:
    """
    Send an instance creation request to the Compute Engine API and wait for it to complete.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        disks: a list of compute_v1.AttachedDisk objects describing the disks
            you want to attach to your new instance.
        machine_type: machine type of the VM being created. This value uses the
            following format: "zones/{zone}/machineTypes/{type_name}".
            For example: "zones/europe-west3-c/machineTypes/f1-micro"
        network_link: name of the network you want the new instance to use.
            For example: "global/networks/default" represents the network
            named "default", which is created automatically for each project.
        subnetwork_link: name of the subnetwork you want the new instance to use.
            This value uses the following format:
            "regions/{region}/subnetworks/{subnetwork_name}"
        internal_ip: internal IP address you want to assign to the new instance.
            By default, a free address from the pool of available internal IP addresses of
            used subnet will be used.
        external_access: boolean flag indicating if the instance should have an external IPv4
            address assigned.
        external_ipv4: external IPv4 address to be assigned to this instance. If you specify
            an external IP address, it must live in the same region as the zone of the instance.
            This setting requires `external_access` to be set to True to work.
        accelerators: a list of AcceleratorConfig objects describing the accelerators that will
            be attached to the new instance.
        preemptible: boolean value indicating if the new instance should be preemptible
            or not. Preemptible VMs have been deprecated and you should now use Spot VMs.
        spot: boolean value indicating if the new instance should be a Spot VM or not.
        instance_termination_action: What action should be taken once a Spot VM is terminated.
            Possible values: "STOP", "DELETE"
        custom_hostname: Custom hostname of the new VM instance.
            Custom hostnames must conform to RFC 1035 requirements for valid hostnames.
        delete_protection: boolean value indicating if the new virtual machine should be
            protected against deletion or not.
    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()

    # Use the network interface provided in the network_link argument.
    network_interface = compute_v1.NetworkInterface()
    network_interface.network = network_link
    if subnetwork_link:
        network_interface.subnetwork = subnetwork_link

    if internal_ip:
        network_interface.network_i_p = internal_ip

    if external_access:
        access = compute_v1.AccessConfig()
        access.type_ = compute_v1.AccessConfig.Type.ONE_TO_ONE_NAT.name
        access.name = "External NAT"
        access.network_tier = access.NetworkTier.PREMIUM.name
        if external_ipv4:
            access.nat_i_p = external_ipv4
        network_interface.access_configs = [access]

    # Collect information into the Instance object.
    instance = compute_v1.Instance()
    instance.network_interfaces = [network_interface]
    instance.name = instance_name
    instance.disks = disks
    if re.match(r"^zones/[a-z\d\-]+/machineTypes/[a-z\d\-]+$", machine_type):
        instance.machine_type = machine_type
    else:
        instance.machine_type = f"zones/{zone}/machineTypes/{machine_type}"

    instance.scheduling = compute_v1.Scheduling()
    if accelerators:
        instance.guest_accelerators = accelerators
        instance.scheduling.on_host_maintenance = (
            compute_v1.Scheduling.OnHostMaintenance.TERMINATE.name
        )

    if preemptible:
        # Set the preemptible setting
        warnings.warn(
            "Preemptible VMs are being replaced by Spot VMs.", DeprecationWarning
        )
        instance.scheduling = compute_v1.Scheduling()
        instance.scheduling.preemptible = True

    if spot:
        # Set the Spot VM setting
        instance.scheduling.provisioning_model = (
            compute_v1.Scheduling.ProvisioningModel.SPOT.name
        )
        instance.scheduling.instance_termination_action = instance_termination_action

    if custom_hostname is not None:
        # Set the custom hostname for the instance
        instance.hostname = custom_hostname

    if delete_protection:
        # Set the delete protection bit
        instance.deletion_protection = True

    # Prepare the request to insert an instance.
    request = compute_v1.InsertInstanceRequest()
    request.zone = zone
    request.project = project_id
    request.instance_resource = instance

    # Wait for the create operation to complete.
    print(f"Creating the {instance_name} instance in {zone}...")

    operation = instance_client.insert(request=request)

    wait_for_extended_operation(operation, "instance creation")

    print(f"Instance {instance_name} created.")
    return instance_client.get(project=project_id, zone=zone, instance=instance_name)


def create_custom_instances_extra_mem(
    project_id: str, zone: str, instance_name: str, core_count: int, memory: int
) -> list[compute_v1.Instance]:
    """
    Create 3 new VM instances with extra memory without using a CustomMachineType helper class.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        core_count: number of CPU cores you want to use.
        memory: the amount of memory for the VM instance, in megabytes.

    Returns:
        List of Instance objects.
    """
    newest_debian = get_image_from_family(project="debian-cloud", family="debian-12")
    disk_type = f"zones/{zone}/diskTypes/pd-standard"
    disks = [disk_from_image(disk_type, 10, True, newest_debian.self_link)]
    # The core_count and memory values are not validated anywhere and can be rejected by the API.
    instances = [
        create_instance(
            project_id,
            zone,
            f"{instance_name}_n1_extra_mem",
            disks,
            f"zones/{zone}/machineTypes/custom-{core_count}-{memory}-ext",
        ),
        create_instance(
            project_id,
            zone,
            f"{instance_name}_n2_extra_mem",
            disks,
            f"zones/{zone}/machineTypes/n2-custom-{core_count}-{memory}-ext",
        ),
        create_instance(
            project_id,
            zone,
            f"{instance_name}_n2d_extra_mem",
            disks,
            f"zones/{zone}/machineTypes/n2d-custom-{core_count}-{memory}-ext",
        ),
    ]
    return instances

REST

Dengan metode instances.insert, buat permintaan pembuatan instance seperti yang Anda lakukan untuk membuat instance dengan memori kustom. Sertakan -ext, yang menunjukkan memori yang diperluas, saat menentukan nilai machineType:

  • Untuk semua jenis mesin kustom, tambahkan -ext untuk memperluas memori hingga batas seperti yang dijelaskan oleh kelompok mesin tertentu tersebut.
  • Inti bersama E2, tentukan micro, small, atau medium.
        zones/ZONE/machineTypes//MACHINE_TYPE-NUMBER_OF_CPUS-AMOUNT_OF_MEMORY-ext

Ganti kode berikut:

  • ZONE: Lokasi mesin
  • MACHINE_TYPE: Jenis mesin, seperti N2 atau E2 kecil
  • NUMBER_OF_CPUS: jumlah vCPU
  • AMOUNT_OF_MEMORY_MB: jumlah memori dalam MB

Misalnya, baris kode berikut menentukan jenis mesin N2 dengan 2 vCPU dan memori 20 GB. Perhatikan bahwa Anda harus mengonversi memori ke MB:

zones/ZONE/machineTypes/n2-custom-2-20480-ext

Menambahkan memori tambahan ke instance VM yang ada

Untuk menambahkan lebih banyak memori ke instance yang ada, Anda harus menghentikan instance terlebih dahulu. Setelah instance berhenti, selesaikan langkah-langkah berikut untuk menambahkan lebih banyak memori ke VM.

Konsol

  1. Di konsol Google Cloud, buka halaman Instance VM.

    Buka halaman VM instances

  2. Pilih VM yang dihentikan yang ingin Anda ubah dari daftar VM.

  3. Klik Edit di bagian atas halaman.

  4. Di Machine configuration, pilih General-purpose.

  5. Di bagian Machine type, pilih Custom.

  6. Pilih jumlah vCPU yang Anda inginkan.

  7. Untuk menambahkan memori tambahan, pilih Extend memory, lalu tentukan jumlah memori yang Anda inginkan.

  8. Simpan perubahan.

gcloud

Gunakan perintah gcloud compute instances stop untuk menghentikan VM. Kemudian, gunakan perintah gcloud compute instances set-machine-type dengan opsi --custom-memory dan --custom-extensions untuk mengedit resource mesin.

Simpan perubahan dan mulai ulang VM.

Go

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Go di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Go Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

import (
	"context"
	"fmt"
	"io"
	"strings"

	compute "cloud.google.com/go/compute/apiv1"
	computepb "cloud.google.com/go/compute/apiv1/computepb"
	"google.golang.org/protobuf/proto"
)

// modifyInstanceWithExtendedMemory sends an instance creation request
// to the Compute Engine API and waits for it to complete.
func modifyInstanceWithExtendedMemory(
	w io.Writer,
	projectID, zone, instanceName string,
	newMemory int,
) error {
	// projectID := "your_project_id"
	// zone := "europe-central2-b"
	// instanceName := "your_instance_name"
	// newMemory := 256 // the amount of memory for the VM instance, in megabytes.

	ctx := context.Background()
	instancesClient, err := compute.NewInstancesRESTClient(ctx)
	if err != nil {
		return fmt.Errorf("NewInstancesRESTClient: %w", err)
	}
	defer instancesClient.Close()

	reqInstance := &computepb.GetInstanceRequest{
		Project:  projectID,
		Zone:     zone,
		Instance: instanceName,
	}

	instance, err := instancesClient.Get(ctx, reqInstance)
	if err != nil {
		return fmt.Errorf("unable to get instance: %w", err)
	}

	containsString := func(s []string, str string) bool {
		for _, v := range s {
			if v == str {
				return true
			}
		}

		return false
	}

	if !(strings.Contains(instance.GetMachineType(), "machineTypes/n1-") ||
		strings.Contains(instance.GetMachineType(), "machineTypes/n2-") ||
		strings.Contains(instance.GetMachineType(), "machineTypes/n2d-")) {
		return fmt.Errorf("extra memory is available only for N1, N2 and N2D CPUs")
	}

	// Make sure that the machine is turned off
	if !containsString([]string{"TERMINATED", "STOPPED"}, instance.GetStatus()) {
		reqStop := &computepb.StopInstanceRequest{
			Project:  projectID,
			Zone:     zone,
			Instance: instanceName,
		}

		op, err := instancesClient.Stop(ctx, reqStop)
		if err != nil {
			return fmt.Errorf("unable to stop instance: %w", err)
		}

		if err = op.Wait(ctx); err != nil {
			return fmt.Errorf("unable to wait for the operation: %w", err)
		}
	}

	// Modify the machine definition, remember that extended memory
	// is available only for N1, N2 and N2D CPUs
	machineType := instance.GetMachineType()
	start := machineType[:strings.LastIndex(machineType, "-")]

	updateReq := &computepb.SetMachineTypeInstanceRequest{
		Project:  projectID,
		Zone:     zone,
		Instance: instanceName,
		InstancesSetMachineTypeRequestResource: &computepb.InstancesSetMachineTypeRequest{
			MachineType: proto.String(fmt.Sprintf("%s-%v-ext", start, newMemory)),
		},
	}
	op, err := instancesClient.SetMachineType(ctx, updateReq)
	if err != nil {
		return fmt.Errorf("unable to update instance: %w", err)
	}

	if err = op.Wait(ctx); err != nil {
		return fmt.Errorf("unable to wait for the operation: %w", err)
	}

	fmt.Fprintf(w, "Instance updated\n")

	return nil

}

Java

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Java di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Java Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.


import com.google.api.gax.longrunning.OperationFuture;
import com.google.cloud.compute.v1.GetInstanceRequest;
import com.google.cloud.compute.v1.Instance;
import com.google.cloud.compute.v1.Instance.Status;
import com.google.cloud.compute.v1.InstancesClient;
import com.google.cloud.compute.v1.InstancesSetMachineTypeRequest;
import com.google.cloud.compute.v1.Operation;
import com.google.cloud.compute.v1.SetMachineTypeInstanceRequest;
import com.google.cloud.compute.v1.StopInstanceRequest;
import java.io.IOException;
import java.util.concurrent.ExecutionException;
import java.util.concurrent.TimeUnit;
import java.util.concurrent.TimeoutException;

public class UpdateMemory {

  public static void main(String[] args)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // TODO(developer): Replace these variables before running the sample.
    // Project ID or project number of the Cloud project you want to use.
    String projectId = "your-google-cloud-project-id";
    // Name of the zone to create the instance in. For example: "us-west3-b".
    String zone = "google-cloud-zone";
    // Name of the new virtual machine (VM) instance.
    String instanceName = "instance-name";
    // The amount of memory for the VM instance, in megabytes.
    int newMemory = 256;

    modifyInstanceWithExtendedMemory(projectId, zone, instanceName, newMemory);
  }

  // Modify an existing VM to use extended memory and return the modified Instance.
  public static void modifyInstanceWithExtendedMemory(
      String project, String zone, String instanceName, int newMemory)
      throws IOException, ExecutionException, InterruptedException, TimeoutException {
    // Initialize client that will be used to send requests. This client only needs to be created
    // once, and can be reused for multiple requests. After completing all of your requests, call
    // the `instancesClient.close()` method on the client to safely
    // clean up any remaining background resources.
    try (InstancesClient instancesClient = InstancesClient.create()) {

      // Create the get instance request object.
      GetInstanceRequest getInstanceRequest = GetInstanceRequest.newBuilder()
          .setProject(project)
          .setZone(zone)
          .setInstance(instanceName)
          .build();

      Instance instance = instancesClient.get(getInstanceRequest);

      // Check the machine type.
      if (!(instance.getMachineType().contains("machineTypes/n1-")
          || instance.getMachineType().contains("machineTypes/n2-")
          || instance.getMachineType().contains("machineTypes/n2d-"))) {
        System.out.println("extra memory is available only for N1, N2 and N2D CPUs");
        return;
      }

      // Make sure that the machine is turned off.
      if (!(instance.getStatus().equals(Status.TERMINATED.toString())
          || instance.getStatus().equals(Status.STOPPED.toString()))) {

        StopInstanceRequest stopInstanceRequest = StopInstanceRequest.newBuilder()
            .setProject(project)
            .setZone(zone)
            .setInstance(instanceName)
            .build();

        OperationFuture<Operation, Operation> operation = instancesClient.stopAsync(
            stopInstanceRequest);
        Operation response = operation.get(3, TimeUnit.MINUTES);
        if (response.hasError()) {
          System.out.printf("Unable to stop instance %s", response.getError());
          return;
        }
      }

      // Modify the machine definition. Note that extended memory
      // is available only for N1, N2 and N2D CPUs.
      String machineType = instance.getMachineType();
      String start = machineType.substring(0, machineType.lastIndexOf("-"));

      // Create the machine type instance request object.
      SetMachineTypeInstanceRequest setMachineTypeInstanceRequest =
          SetMachineTypeInstanceRequest.newBuilder()
              .setProject(project)
              .setZone(zone)
              .setInstance(instanceName)
              .setInstancesSetMachineTypeRequestResource(InstancesSetMachineTypeRequest.newBuilder()
                  .setMachineType(String.format("%s-%d-ext", start, newMemory))
                  .build())
              .build();

      // Invoke the API with the request object and wait for the operation to complete.
      Operation response = instancesClient.setMachineTypeAsync(setMachineTypeInstanceRequest)
          .get(3, TimeUnit.MINUTES);

      // Check for errors.
      if (response.hasError()) {
        System.out.printf("Unable to update instance %s", response.getError());
        return;
      }
      System.out.println("Instance updated!");
    }
  }
}

Node.js

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Node.js di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Node.js Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

/**
 * TODO(developer): Uncomment and replace these variables before running the sample.
 */
// const projectId = 'YOUR_PROJECT_ID';
// const zone = 'europe-central2-b';
// const instanceName = 'YOUR_INSTANCE_NAME';
// const newMemory = 256;

const compute = require('@google-cloud/compute');

async function modifyInstanceWithExtendedMemory() {
  const instancesClient = new compute.InstancesClient();

  const [instance] = await instancesClient.get({
    project: projectId,
    zone,
    instance: instanceName,
  });

  if (
    !['machineTypes/n1-', 'machineTypes/n2-', 'machineTypes/n2d-'].some(
      type => instance.machineType.includes(type)
    )
  ) {
    throw new Error('extra memory is available only for N1, N2 and N2D CPUs');
  }

  // Make sure that the machine is turned off
  if (!['TERMINATED', 'STOPPED'].some(status => instance.status === status)) {
    const [response] = await instancesClient.stop({
      project: projectId,
      zone,
      instance: instanceName,
    });

    let operation = response.latestResponse;
    const operationsClient = new compute.ZoneOperationsClient();

    // Wait for the stop operation to complete.
    while (operation.status !== 'DONE') {
      [operation] = await operationsClient.wait({
        operation: operation.name,
        project: projectId,
        zone: operation.zone.split('/').pop(),
      });
    }
  }

  // Modify the machine definition, remember that extended memory
  // is available only for N1, N2 and N2D CPUs

  const start = instance.machineType.substring(
    0,
    instance.machineType.lastIndexOf('-')
  );

  const [response] = await instancesClient.setMachineType({
    project: projectId,
    zone,
    instance: instanceName,
    instancesSetMachineTypeRequestResource: {
      machineType: `${start}-${newMemory}-ext`,
    },
  });
  let operation = response.latestResponse;
  const operationsClient = new compute.ZoneOperationsClient();

  // Wait for the update operation to complete.
  while (operation.status !== 'DONE') {
    [operation] = await operationsClient.wait({
      operation: operation.name,
      project: projectId,
      zone: operation.zone.split('/').pop(),
    });
  }

  console.log('Instance updated.');
}

modifyInstanceWithExtendedMemory();

Python

Sebelum mencoba contoh ini, ikuti petunjuk penyiapan Python di panduan memulai Compute Engine menggunakan library klien. Untuk informasi selengkapnya, lihat dokumentasi referensi API Python Compute Engine.

Untuk melakukan autentikasi ke Compute Engine, siapkan Kredensial Default Aplikasi. Untuk mengetahui informasi selengkapnya, baca Menyiapkan autentikasi untuk lingkungan pengembangan lokal.

from __future__ import annotations

import sys
import time
from typing import Any

from google.api_core.extended_operation import ExtendedOperation
from google.cloud import compute_v1


def wait_for_extended_operation(
    operation: ExtendedOperation, verbose_name: str = "operation", timeout: int = 300
) -> Any:
    """
    Waits for the extended (long-running) operation to complete.

    If the operation is successful, it will return its result.
    If the operation ends with an error, an exception will be raised.
    If there were any warnings during the execution of the operation
    they will be printed to sys.stderr.

    Args:
        operation: a long-running operation you want to wait on.
        verbose_name: (optional) a more verbose name of the operation,
            used only during error and warning reporting.
        timeout: how long (in seconds) to wait for operation to finish.
            If None, wait indefinitely.

    Returns:
        Whatever the operation.result() returns.

    Raises:
        This method will raise the exception received from `operation.exception()`
        or RuntimeError if there is no exception set, but there is an `error_code`
        set for the `operation`.

        In case of an operation taking longer than `timeout` seconds to complete,
        a `concurrent.futures.TimeoutError` will be raised.
    """
    result = operation.result(timeout=timeout)

    if operation.error_code:
        print(
            f"Error during {verbose_name}: [Code: {operation.error_code}]: {operation.error_message}",
            file=sys.stderr,
            flush=True,
        )
        print(f"Operation ID: {operation.name}", file=sys.stderr, flush=True)
        raise operation.exception() or RuntimeError(operation.error_message)

    if operation.warnings:
        print(f"Warnings during {verbose_name}:\n", file=sys.stderr, flush=True)
        for warning in operation.warnings:
            print(f" - {warning.code}: {warning.message}", file=sys.stderr, flush=True)

    return result


def add_extended_memory_to_instance(
    project_id: str, zone: str, instance_name: str, new_memory: int
):
    """
    Modify an existing VM to use extended memory.

    Args:
        project_id: project ID or project number of the Cloud project you want to use.
        zone: name of the zone to create the instance in. For example: "us-west3-b"
        instance_name: name of the new virtual machine (VM) instance.
        new_memory: the amount of memory for the VM instance, in megabytes.

    Returns:
        Instance object.
    """
    instance_client = compute_v1.InstancesClient()
    instance = instance_client.get(
        project=project_id, zone=zone, instance=instance_name
    )

    if not (
        "n1-" in instance.machine_type
        or "n2-" in instance.machine_type
        or "n2d-" in instance.machine_type
    ):
        raise RuntimeError("Extra memory is available only for N1, N2 and N2D CPUs.")

    # Make sure that the machine is turned off
    if instance.status not in (
        instance.Status.TERMINATED.name,
        instance.Status.STOPPED.name,
    ):
        operation = instance_client.stop(
            project=project_id, zone=zone, instance=instance_name
        )
        wait_for_extended_operation(operation, "instance stopping")
        start = time.time()
        while instance.status not in (
            instance.Status.TERMINATED.name,
            instance.Status.STOPPED.name,
        ):
            # Waiting for the instance to be turned off.
            instance = instance_client.get(
                project=project_id, zone=zone, instance=instance_name
            )
            time.sleep(2)
            if time.time() - start >= 300:  # 5 minutes
                raise TimeoutError()

    # Modify the machine definition, remember that extended memory is available only for N1, N2 and N2D CPUs
    start, end = instance.machine_type.rsplit("-", maxsplit=1)
    instance.machine_type = start + f"-{new_memory}-ext"
    # TODO: If you prefer to use the CustomMachineType helper class, uncomment this code and comment the 2 lines above
    # Using CustomMachineType helper
    # cmt = CustomMachineType.from_str(instance.machine_type)
    # cmt.memory_mb = new_memory
    # cmt.extra_memory_used = True
    # instance.machine_type = str(cmt)
    operation = instance_client.update(
        project=project_id,
        zone=zone,
        instance=instance_name,
        instance_resource=instance,
    )
    wait_for_extended_operation(operation, "instance update")

    return instance_client.get(project=project_id, zone=zone, instance=instance_name)

REST

Gunakan metode instances.stop, lalu gunakan metode instances.setMachineType untuk mengedit resource jenis mesin.

Setelah menghentikan instance, edit opsi machineTypes dengan perubahan Anda.

{

"name": "INSTANCE_NAME", "machineType": "zones/ZONE/machineTypes/MACHINE_TYPE",

... }

Ganti kode berikut:

+ INSTANCE_NAME: The name of the VM
+ ZONE: The zone where your VMs reside
+ MACHINE_TYPE: The name of the VM

Langkah selanjutnya