本文說明如何使用 Bindplane 代理程式,將 NetApp SAN 記錄擷取至 Google Security Operations。剖析器會使用 Grok 模式從 NetApp SAN 記錄中擷取欄位,然後將這些擷取的欄位對應至 Google SecOps UDM,並使用靜態供應商和產品資訊擴充資料,以進行標準化安全分析。如果記錄項目不符合預期模式,系統會捨棄該項目,因為這類項目沒有安全性價值。
事前準備
確認您擁有 Google SecOps 執行個體。
確認您使用的是 Windows 2016 以上版本,或是搭載 systemd 的 Linux 主機。
找出 config.yaml 檔案。通常位於 Linux 的 /etc/bindplane-agent/ 目錄,或 Windows 的安裝目錄。
使用文字編輯器 (例如 nano、vi 或記事本) 開啟檔案。
按照下列方式編輯 config.yaml 檔案:
receivers:udplog:# Replace the port and IP address as requiredlisten_address:"0.0.0.0:514"exporters:chronicle/chronicle_w_labels:compression:gzip# Adjust the path to the credentials file you downloaded in Step 1creds:'/path/to/ingestion-authentication-file.json'# Replace with your actual customer ID from Step 2customer_id:<customer_id>
endpoint:malachiteingestion-pa.googleapis.com# Add optional ingestion labels for better organizationingestion_labels:log_type:NETAPP_SANraw_log_field:bodyservice:pipelines:logs/source0__chronicle_w_labels-0:receivers:-udplogexporters:-chronicle/chronicle_w_labels
視基礎架構需求,替換通訊埠和 IP 位址。
將 <customer_id> 替換為實際的客戶 ID。
將 /path/to/ingestion-authentication-file.json 更新為「取得 Google SecOps 擷取驗證檔案」一節中儲存驗證檔案的路徑。
重新啟動 Bindplane 代理程式,以套用變更
如要在 Linux 中重新啟動 Bindplane 代理程式,請執行下列指令:
sudosystemctlrestartbindplane-agent
如要在 Windows 中重新啟動 Bindplane 代理程式,可以使用「服務」控制台,或輸入下列指令:
net stop BindPlaneAgent && net start BindPlaneAgent
在 NetApp SAN 中設定 Syslog
登入 NetApp SAN 網頁版 UI。
依序前往「Configuration」(設定) >「Monitoring」(監控) >「Audit and syslog server」(稽核和系統記錄伺服器)。
[[["容易理解","easyToUnderstand","thumb-up"],["確實解決了我的問題","solvedMyProblem","thumb-up"],["其他","otherUp","thumb-up"]],[["難以理解","hardToUnderstand","thumb-down"],["資訊或程式碼範例有誤","incorrectInformationOrSampleCode","thumb-down"],["缺少我需要的資訊/範例","missingTheInformationSamplesINeed","thumb-down"],["翻譯問題","translationIssue","thumb-down"],["其他","otherDown","thumb-down"]],["上次更新時間:2025-09-04 (世界標準時間)。"],[],[],null,["# Collect NetApp SAN logs\n=======================\n\nSupported in: \nGoogle secops [SIEM](/chronicle/docs/secops/google-secops-siem-toc)\n| **Note:** This feature is covered by [Pre-GA Offerings Terms](https://chronicle.security/legal/service-terms/) of the Google Security Operations Service Specific Terms. Pre-GA features might have limited support, and changes to pre-GA features might not be compatible with other pre-GA versions. For more information, see the [Google SecOps Technical Support Service guidelines](https://chronicle.security/legal/technical-support-services-guidelines/) and the [Google SecOps Service Specific Terms](https://chronicle.security/legal/service-terms/).\n\nThis document explains how to ingest NetApp SAN logs to Google Security Operations using a Bindplane agent. The parser extracts fields from NetApp SAN logs using Grok patterns, then maps those extracted fields to the Google SecOps UDM, enriching the data with static vendor and product information for standardized security analysis. If the log entry doesn't match the expected pattern, it's dropped as having no security value.\n\nBefore you begin\n----------------\n\n- Ensure that you have a Google SecOps instance.\n- Ensure that you are using Windows 2016 or later, or a Linux host with `systemd`.\n- If running behind a proxy, ensure firewall [ports](/chronicle/docs/ingestion/use-bindplane-agent#verify_the_firewall_configuration) are open.\n- Ensure that you have privileged access to NetApp SAN.\n\nGet Google SecOps ingestion authentication file\n-----------------------------------------------\n\n1. Sign in to the Google SecOps console.\n2. Go to **SIEM Settings \\\u003e Collection Agents**.\n3. Download the **Ingestion Authentication File**. Save the file securely on the system where Bindplane will be installed.\n\nGet Google SecOps customer ID\n-----------------------------\n\n1. Sign in to the Google SecOps console.\n2. Go to **SIEM Settings \\\u003e Profile**.\n3. Copy and save the **Customer ID** from the **Organization Details** section.\n\nInstall the Bindplane agent\n---------------------------\n\n### Windows installation\n\n1. Open the **Command Prompt** or **PowerShell** as an administrator.\n2. Run the following command:\n\n msiexec /i \"https://github.com/observIQ/bindplane-agent/releases/latest/download/observiq-otel-collector.msi\" /quiet\n\n### Linux installation\n\n1. Open a terminal with root or sudo privileges.\n2. Run the following command:\n\n sudo sh -c \"$(curl -fsSlL https://github.com/observiq/bindplane-agent/releases/latest/download/install_unix.sh)\" install_unix.sh\n\n### Additional installation resources\n\n- For additional installation options, consult this [installation guide](/chronicle/docs/ingestion/use-bindplane-agent#install_the_bindplane_agent).\n\nConfigure the Bindplane agent to ingest Syslog and send to Google SecOps\n------------------------------------------------------------------------\n\n1. Access the configuration file:\n\n 1. Locate the `config.yaml` file. Typically, it's in the `/etc/bindplane-agent/` directory on Linux or in the installation directory on Windows.\n 2. Open the file using a text editor (for example, `nano`, `vi`, or Notepad).\n2. Edit the `config.yaml` file as follows:\n\n receivers:\n udplog:\n # Replace the port and IP address as required\n listen_address: \"0.0.0.0:514\"\n\n exporters:\n chronicle/chronicle_w_labels:\n compression: gzip\n # Adjust the path to the credentials file you downloaded in Step 1\n creds: '/path/to/ingestion-authentication-file.json'\n # Replace with your actual customer ID from Step 2\n customer_id: \u003ccustomer_id\u003e\n endpoint: malachiteingestion-pa.googleapis.com\n # Add optional ingestion labels for better organization\n ingestion_labels:\n log_type: NETAPP_SAN\n raw_log_field: body\n\n service:\n pipelines:\n logs/source0__chronicle_w_labels-0:\n receivers:\n - udplog\n exporters:\n - chronicle/chronicle_w_labels\n\n3. Replace the port and IP address as required in your infrastructure.\n\n4. Replace `\u003ccustomer_id\u003e` with the actual customer ID.\n\n5. Update `/path/to/ingestion-authentication-file.json` to the path where the authentication file was saved in the\n [Get Google SecOps ingestion authentication file](/chronicle/docs/ingestion/default-parsers/netapp-san#get-auth-file) section.\n\nRestart the Bindplane agent to apply the changes\n------------------------------------------------\n\n- To restart the Bindplane agent in Linux, run the following command:\n\n sudo systemctl restart bindplane-agent\n\n- To restart the Bindplane agent in Windows, you can either use the **Services** console or enter the following command:\n\n net stop BindPlaneAgent && net start BindPlaneAgent\n\nConfigure Syslon in NetApp SAN\n------------------------------\n\n1. Sign in to the NetApp SAN web UI.\n2. Go to **Configuration \\\u003e Monitoring \\\u003e Audit and syslog server**.\n3. Click **Configure external syslog server** or **Edit external syslog server**.\n4. Provide the following configuration details:\n - **Host**: enter the Bindplane IP address.\n - **Port** : enter the Bindplane port number; for example, `514` for UDP.\n - **Protocol** : Select **UDP**.\n5. Click **Continue**.\n6. Enable and select the following Syslog content:\n - **Send audit logs** : enable and set `Severity:Informational(6)`, `facility:local7`.\n - **Send security events** : enable and set `Severity:Passthrough`, `facility:Passthrough`.\n - **Send application logs**: keep this disabled.\n7. Click **Continue**.\n8. Send a log test message.\n9. Click **Save**.\n\nUDM Mapping Table\n-----------------\n\n**Need more help?** [Get answers from Community members and Google SecOps professionals.](https://security.googlecloudcommunity.com/google-security-operations-2)"]]