이 문서에서는 Bindplane을 사용하여 HPE Aruba Networking Central 로그를 Google SecOps에 수집하는 방법을 설명합니다. 파서는 Aruba Central syslog 형식 로그에서 필드를 추출합니다. grok 또는 kv를 사용하여 로그 메시지를 파싱한 다음 이러한 값을 통합 데이터 모델 (UDM)에 매핑합니다. 이 함수는 이벤트 소스 및 유형의 기본 메타데이터 값을 설정합니다.
시작하기 전에
다음 기본 요건이 충족되었는지 확인합니다.
Google SecOps 인스턴스
Windows 2016 이상 또는 systemd가 있는 Linux 호스트
프록시 뒤에서 실행하는 경우 BindPlane 에이전트 요구사항에 따라 방화벽 포트가 열려 있는지 확인합니다.
Aruba Central Management 콘솔에 대한 권한이 있는 액세스
Google SecOps 수집 인증 파일 가져오기
Google SecOps 콘솔에 로그인합니다.
SIEM 설정 > 수집 에이전트로 이동합니다.
수집 인증 파일을 다운로드합니다. Bindplane이 설치될 시스템에 파일을 안전하게 저장합니다.
Google SecOps 고객 ID 가져오기
Google SecOps 콘솔에 로그인합니다.
SIEM 설정 > 프로필로 이동합니다.
조직 세부정보 섹션에서 고객 ID를 복사하여 저장합니다.
Bindplane 에이전트 설치
다음 안내에 따라 Windows 또는 Linux 운영체제에 Bindplane 에이전트를 설치합니다.
Syslog를 수집하여 Google SecOps로 전송하도록 Bindplane 에이전트 구성
구성 파일에 액세스합니다.
config.yaml 파일을 찾습니다. 일반적으로 Linux에서는 /etc/bindplane-agent/ 디렉터리에 있고 Windows에서는 설치 디렉터리에 있습니다.
텍스트 편집기 (예: nano, vi, 메모장)를 사용하여 파일을 엽니다.
다음과 같이 config.yaml 파일을 수정합니다.
receivers:udplog:# Replace the port and IP address as requiredlisten_address:"0.0.0.0:514"exporters:chronicle/chronicle_w_labels:compression:gzip# Adjust the path to the credentials file you downloaded in Step 1creds_file_path:'/path/to/ingestion-authentication-file.json'# Replace with your actual customer ID from Step 2customer_id:<customer_id>
endpoint:malachiteingestion-pa.googleapis.com# Add optional ingestion labels for better organizationlog_type:'ARUBA_CENTRAL'raw_log_field:bodyingestion_labels:service:pipelines:logs/source0__chronicle_w_labels-0:receivers:-udplogexporters:-chronicle/chronicle_w_labels
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-10(UTC)"],[],[],null,["Collect HPE Aruba Networking Central logs \nSupported in: \nGoogle secops [SIEM](/chronicle/docs/secops/google-secops-siem-toc)\n| **Note:** This feature is covered by [Pre-GA Offerings Terms](https://chronicle.security/legal/service-terms/) of the Google Security Operations Service Specific Terms. Pre-GA features might have limited support, and changes to pre-GA features might not be compatible with other pre-GA versions. For more information, see the [Google SecOps Technical Support Service guidelines](https://chronicle.security/legal/technical-support-services-guidelines/) and the [Google SecOps Service Specific Terms](https://chronicle.security/legal/service-terms/).\n\nThis document explains how to ingest HPE Aruba Networking Central logs to Google SecOps using Bindplane. The parser extracts fields from Aruba Central syslog formatted logs. It uses grok and/or kv to parse the log message and then maps these values to the Unified Data Model (UDM). It sets default metadata values for the event source and type.\n\nBefore you begin\n\nMake sure you have the following prerequisites:\n\n- Google SecOps instance\n- Windows 2016 or later or Linux host with systemd\n- If running behind a proxy, ensure firewall ports are open per the BindPlane agent requirements\n- Privileged access to the **Aruba Central Management** console\n\nGet Google SecOps ingestion authentication file\n\n1. Sign in to the Google SecOps console.\n2. Go to **SIEM Settings \\\u003e Collection Agents**.\n3. Download the **Ingestion Authentication File**. Save the file securely on the system where Bindplane will be installed.\n\nGet Google SecOps Customer ID\n\n1. Sign in to the Google SecOps console.\n2. Go to **SIEM Settings \\\u003e Profile**.\n3. Copy and save the **Customer ID** from the **Organization Details** section.\n\nInstall the Bindplane agent\n\nInstall the Bindplane agent on your Windows or Linux operating system\naccording to the following instructions.\n\nWindows installation\n\n1. Open the **Command Prompt** or **PowerShell** as an administrator.\n2. Run the following command:\n\n msiexec /i \"https://github.com/observIQ/bindplane-agent/releases/latest/download/observiq-otel-collector.msi\" /quiet\n\nLinux installation\n\n1. Open a terminal with root or sudo privileges.\n2. Run the following command:\n\n sudo sh -c \"$(curl -fsSlL https://github.com/observiq/bindplane-agent/releases/latest/download/install_unix.sh)\" install_unix.sh\n\nAdditional installation resources\n\nFor additional installation options, consult the [installation guide](/chronicle/docs/ingestion/use-bindplane-agent#install_the_bindplane_agent).\n\nConfigure the Bindplane agent to ingest Syslog and send to Google SecOps\n\n1. Access the configuration file:\n - Locate the `config.yaml` file. Typically, it's in the `/etc/bindplane-agent/` directory on Linux or in the installation directory on Windows.\n - Open the file using a text editor (for example, `nano`, `vi`, or Notepad).\n2. Edit the `config.yaml` file as follows:\n\n receivers:\n udplog:\n # Replace the port and IP address as required\n listen_address: \"0.0.0.0:514\"\n\n exporters:\n chronicle/chronicle_w_labels:\n compression: gzip\n # Adjust the path to the credentials file you downloaded in Step 1\n creds_file_path: '/path/to/ingestion-authentication-file.json'\n # Replace with your actual customer ID from Step 2\n customer_id: \u003ccustomer_id\u003e\n endpoint: malachiteingestion-pa.googleapis.com\n # Add optional ingestion labels for better organization\n log_type: 'ARUBA_CENTRAL'\n raw_log_field: body\n ingestion_labels:\n\n service:\n pipelines:\n logs/source0__chronicle_w_labels-0:\n receivers:\n - udplog\n exporters:\n - chronicle/chronicle_w_labels\n\n - Replace the port and IP address as required in your infrastructure.\n - Replace `\u003ccustomer_id\u003e` with the actual customer ID.\n - Update `/path/to/ingestion-authentication-file.json` to the path where the authentication file was saved in the [Get Google SecOps ingestion authentication file](/chronicle/docs/ingestion/default-parsers/hpe-anc#get-auth-file) section.\n\nRestart the Bindplane agent to apply the changes\n\n- To restart the Bindplane agent in Linux, run the following command:\n\n sudo systemctl restart bindplane-agent\n\n- To restart the Bindplane agent in Windows, you can either use the **Services** console or enter the following command:\n\n net stop BindPlaneAgent && net start BindPlaneAgent\n\nConfigure Syslog on Aruba Central\n\n1. Sign in to **Aruba Central** web UI.\n2. From the dashboard, locate a **group** that contains the **devices** you want to configure, or set the filter to **All Devices** for global settings.\n3. Click the device or group you want to configure.\n4. Go to **Configuration \\\u003e System \\\u003e Logging**.\n5. Locate the **Syslog Servers** section and click the **+** button.\n - **Server Name**: Enter a unique and descriptive name.\n - **Server IP**: Enter the Bindplane Agent IP address.\n - **Server Port**: Enter the Bindplane Agent port number.\n - **Logging Format**: Select Syslog.\n - **Category and Facility**: Select the categories and facilities for which you want to send logs.\n - **Logging Level** : Select **Informational**.\n6. Click **Save Settings**.\n\n**Need more help?** [Get answers from Community members and Google SecOps professionals.](https://security.googlecloudcommunity.com/google-security-operations-2)"]]
