Use customer-managed encryption keys

Overview

This page describes how to use a manually-created Cloud Key Management Service encryption key with Cloud Storage, including setting default keys on buckets and adding keys to individual objects. A Cloud KMS encryption key is a customer-managed encryption key (CMEK). Such keys are created and managed through Cloud KMS and stored as software keys, in an HSM cluster, or externally.

If you instead want to use the Cloud KMS Autokey feature to generate key rings and keys on demand that protect your Cloud Storage buckets and the objects within them, see Using Autokey with Cloud Storage resources. To decide which key type is right for you when comparing CMEK to Cloud KMS with Autokey and Google default encryption, see Comparison of CMEK and Google-owned and Google-managed keys.

Before you begin

Before using this feature in Cloud Storage, you must:

  1. Enable the Cloud KMS API for the project that will store your encryption keys.

    Enable the API

  2. Have sufficient permission for the project that will store your encryption keys:

    • If you own the project that will store your keys, you most likely have the necessary permission.

    • If you plan to create new encryption key rings and keys, you should have cloudkms.keyRings.create and cloudkms.cryptoKeys.create permission.

    • Whether you plan to use new or existing key rings and keys, you should have cloudkms.cryptoKeys.setIamPolicy permission for the keys that you will use for encryption.

      This permission allows you to give Cloud Storage service agents access to Cloud KMS keys.

    • The above permissions are contained in the Cloud KMS Admin role.

      See Using IAM with Cloud KMS for instructions on how to get this or other Cloud KMS roles.

  3. Have a Cloud KMS key ring, and have at least one key within the key ring.

    The key ring must be in the same location as the data you intend to encrypt, but it can be in a different project. For available Cloud KMS locations, see Cloud KMS locations.

  4. Have sufficient permission to work with objects in your Cloud Storage bucket:

    • If you own the project that contains the bucket, you most likely have the necessary permission.

    • If you use IAM, you should have storage.objects.create permission to write objects to the bucket and storage.objects.get permission to read objects from the bucket. See Using IAM Permissions for instructions on how to get a role, such as Storage Object Admin that has these permissions.

    • If you use ACLs, you should have bucket-scoped WRITER permission to write objects to the bucket and object-scoped READER permission to read objects from the bucket. See Setting ACLs for instructions on how to do this.

  5. Get the email address of the service agent associated with the project that contains your Cloud Storage bucket. By performing this step, you automatically create the service agent if it doesn't currently exist.

Assign a Cloud KMS key to a service agent

In order to use CMEKs, grant the Cloud Storage service agent associated with your bucket the permission to use your Cloud KMS key for encrypting and decrypting:

Console

  1. Open the Cloud Key Management Service Keys browser in the Google Cloud console.
    Open the Cloud KMS Keys browser
  2. Click the name of the key ring that contains the key you want to use.

  3. Select the checkbox for the desired key.

    The Permissions tab in the right window pane becomes available.

  4. In the Add principals dialog, specify the email address of the Cloud Storage service agent you are granting access.

  5. In the Select a role drop down, select Cloud KMS CryptoKey Encrypter/Decrypter.

  6. Click Add.

To learn how to get detailed error information about failed Cloud Storage operations in the Google Cloud console, see Troubleshooting.

Command line

Use the gcloud storage service-agent command with the --authorize-cmek flag to give the service agent associated with your bucket permission to encrypt and decrypt objects using your Cloud KMS key:

gcloud storage service-agent --project=PROJECT_STORING_OBJECTS --authorize-cmek=KEY_RESOURCE

Where:

  • PROJECT_STORING_OBJECTS is the ID or number for the project containing the objects you want to encrypt or decrypt. For example, my-pet-project.
  • KEY_RESOURCE is your Cloud KMS key resource.

Client libraries

C#

For more information, see the Cloud Storage C# API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.


using Google.Cloud.Iam.V1;
using Google.Cloud.Kms.V1;

public class IamAddMemberSample
{
    public Policy IamAddMember(
      string projectId = "my-project", string locationId = "us-east1", string keyRingId = "my-key-ring", string keyId = "my-key",
      string member = "user:foo@example.com")
    {
        // Create the client.
        KeyManagementServiceClient client = KeyManagementServiceClient.Create();

        // Build the resource name.
        CryptoKeyName resourceName = new CryptoKeyName(projectId, locationId, keyRingId, keyId);

        // The resource name could also be a key ring.
        // var resourceName = new KeyRingName(projectId, locationId, keyRingId);

        // Get the current IAM policy.
        Policy policy = client.IAMPolicyClient.GetIamPolicy(
            new GetIamPolicyRequest
            { 
                ResourceAsResourceName = resourceName
            });

        // Add the member to the policy.
        policy.AddRoleMember("roles/cloudkms.cryptoKeyEncrypterDecrypter", member);

        // Save the updated IAM policy.
        Policy result = client.IAMPolicyClient.SetIamPolicy(
            new SetIamPolicyRequest
            {
                ResourceAsResourceName = resourceName,
                Policy = policy
            });

        // Return the resulting policy.
        return result;
    }
}

Go

For more information, see the Cloud Storage Go API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import (
	"context"
	"fmt"
	"io"

	kms "cloud.google.com/go/kms/apiv1"
)

// iamAddMember adds a new IAM member to the Cloud KMS key
func iamAddMember(w io.Writer, name, member string) error {
	// NOTE: The resource name can be either a key or a key ring. If IAM
	// permissions are granted on the key ring, the permissions apply to all keys
	// in the key ring.
	//
	// name := "projects/my-project/locations/us-east1/keyRings/my-key-ring/cryptoKeys/my-key"
	// member := "user:foo@example.com"

	// Create the client.
	ctx := context.Background()
	client, err := kms.NewKeyManagementClient(ctx)
	if err != nil {
		return fmt.Errorf("failed to create kms client: %w", err)
	}
	defer client.Close()

	// Get the current IAM policy.
	handle := client.ResourceIAM(name)
	policy, err := handle.Policy(ctx)
	if err != nil {
		return fmt.Errorf("failed to get IAM policy: %w", err)
	}

	// Grant the member permissions. This example grants permission to use the key
	// to encrypt data.
	policy.Add(member, "roles/cloudkms.cryptoKeyEncrypterDecrypter")
	if err := handle.SetPolicy(ctx, policy); err != nil {
		return fmt.Errorf("failed to save policy: %w", err)
	}

	fmt.Fprintf(w, "Updated IAM policy for %s\n", name)
	return nil
}

Java

For more information, see the Cloud Storage Java API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import com.google.cloud.kms.v1.CryptoKeyName;
import com.google.cloud.kms.v1.KeyManagementServiceClient;
import com.google.iam.v1.Binding;
import com.google.iam.v1.Policy;
import java.io.IOException;

public class IamAddMember {

  public void iamAddMember() throws IOException {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "your-project-id";
    String locationId = "us-east1";
    String keyRingId = "my-key-ring";
    String keyId = "my-key";
    String member = "user:foo@example.com";
    iamAddMember(projectId, locationId, keyRingId, keyId, member);
  }

  // Add the given IAM member to the key.
  public void iamAddMember(
      String projectId, String locationId, String keyRingId, String keyId, String member)
      throws IOException {
    // Initialize client that will be used to send requests. This client only
    // needs to be created once, and can be reused for multiple requests. After
    // completing all of your requests, call the "close" method on the client to
    // safely clean up any remaining background resources.
    try (KeyManagementServiceClient client = KeyManagementServiceClient.create()) {
      // Build the key version name from the project, location, key ring, key,
      // and key version.
      CryptoKeyName resourceName = CryptoKeyName.of(projectId, locationId, keyRingId, keyId);

      // The resource name could also be a key ring.
      // KeyRingName resourceName = KeyRingName.of(projectId, locationId, keyRingId);

      // Get the current policy.
      Policy policy = client.getIamPolicy(resourceName);

      // Create a new IAM binding for the member and role.
      Binding binding =
          Binding.newBuilder()
              .setRole("roles/cloudkms.cryptoKeyEncrypterDecrypter")
              .addMembers(member)
              .build();

      // Add the binding to the policy.
      Policy newPolicy = policy.toBuilder().addBindings(binding).build();

      client.setIamPolicy(resourceName, newPolicy);
      System.out.printf("Updated IAM policy for %s%n", resourceName.toString());
    }
  }
}

Node.js

For more information, see the Cloud Storage Node.js API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

//
// TODO(developer): Uncomment these variables before running the sample.
//
// const projectId = 'my-project';
// const locationId = 'us-east1';
// const keyRingId = 'my-key-ring';
// const keyId = 'my-key';
// const member = 'user:foo@example.com';

// Imports the Cloud KMS library
const {KeyManagementServiceClient} = require('@google-cloud/kms');

// Instantiates a client
const client = new KeyManagementServiceClient();

// Build the resource name
const resourceName = client.cryptoKeyPath(
  projectId,
  locationId,
  keyRingId,
  keyId
);

// The resource name could also be a key ring.
// const resourceName = client.keyRingPath(projectId, locationId, keyRingId);

async function iamAddMember() {
  // Get the current IAM policy.
  const [policy] = await client.getIamPolicy({
    resource: resourceName,
  });

  // Add the member to the policy.
  policy.bindings.push({
    role: 'roles/cloudkms.cryptoKeyEncrypterDecrypter',
    members: [member],
  });

  // Save the updated policy.
  const [updatedPolicy] = await client.setIamPolicy({
    resource: resourceName,
    policy: policy,
  });

  console.log('Updated policy');
  return updatedPolicy;
}

return iamAddMember();

PHP

For more information, see the Cloud Storage PHP API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

use Google\Cloud\Iam\V1\Binding;
use Google\Cloud\Iam\V1\GetIamPolicyRequest;
use Google\Cloud\Iam\V1\SetIamPolicyRequest;
use Google\Cloud\Kms\V1\Client\KeyManagementServiceClient;

function iam_add_member(
    string $projectId = 'my-project',
    string $locationId = 'us-east1',
    string $keyRingId = 'my-key-ring',
    string $keyId = 'my-key',
    string $member = 'user:foo@example.com'
) {
    // Create the Cloud KMS client.
    $client = new KeyManagementServiceClient();

    // Build the resource name.
    $resourceName = $client->cryptoKeyName($projectId, $locationId, $keyRingId, $keyId);

    // The resource name could also be a key ring.
    // $resourceName = $client->keyRingName($projectId, $locationId, $keyRingId);

    // Get the current IAM policy.
    $getIamPolicyRequest = (new GetIamPolicyRequest())
        ->setResource($resourceName);
    $policy = $client->getIamPolicy($getIamPolicyRequest);

    // Add the member to the policy.
    $bindings = $policy->getBindings();
    $bindings[] = (new Binding())
        ->setRole('roles/cloudkms.cryptoKeyEncrypterDecrypter')
        ->setMembers([$member]);
    $policy->setBindings($bindings);

    // Save the updated IAM policy.
    $setIamPolicyRequest = (new SetIamPolicyRequest())
        ->setResource($resourceName)
        ->setPolicy($policy);
    $updatedPolicy = $client->setIamPolicy($setIamPolicyRequest);
    printf('Added %s' . PHP_EOL, $member);

    return $updatedPolicy;
}

Python

For more information, see the Cloud Storage Python API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

from google.cloud import kms
from google.iam.v1 import policy_pb2 as iam_policy


def iam_add_member(
    project_id: str, location_id: str, key_ring_id: str, key_id: str, member: str
) -> iam_policy.Policy:
    """
    Add an IAM member to a resource.

    Args:
        project_id (string): Google Cloud project ID (e.g. 'my-project').
        location_id (string): Cloud KMS location (e.g. 'us-east1').
        key_ring_id (string): ID of the Cloud KMS key ring (e.g. 'my-key-ring').
        key_id (string): ID of the key to use (e.g. 'my-key').
        member (string): Member to add (e.g. 'user:foo@example.com')

    Returns:
        Policy: Updated Cloud IAM policy.

    """

    # Create the client.
    client = kms.KeyManagementServiceClient()

    # Build the resource name.
    resource_name = client.crypto_key_path(project_id, location_id, key_ring_id, key_id)

    # The resource name could also be a key ring.
    # resource_name = client.key_ring_path(project_id, location_id, key_ring_id);

    # Get the current policy.
    policy = client.get_iam_policy(request={"resource": resource_name})

    # Add the member to the policy.
    policy.bindings.add(
        role="roles/cloudkms.cryptoKeyEncrypterDecrypter", members=[member]
    )

    # Save the updated IAM policy.
    request = {"resource": resource_name, "policy": policy}

    updated_policy = client.set_iam_policy(request=request)
    print(f"Added {member} to {resource_name}")
    return updated_policy

Ruby

For more information, see the Cloud Storage Ruby API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

# TODO(developer): uncomment these values before running the sample.
# project_id  = "my-project"
# location_id = "us-east1"
# key_ring_id = "my-key-ring"
# key_id      = "my-key"
# member      = "user:foo@example.com"

# Require the library.
require "google/cloud/kms"

# Create the client.
client = Google::Cloud::Kms.key_management_service

# Build the resource name.
resource_name = client.crypto_key_path project:    project_id,
                                       location:   location_id,
                                       key_ring:   key_ring_id,
                                       crypto_key: key_id

# The resource name could also be a key ring.
# resource_name = client.key_ring_path project: project_id, location: location_id, key_ring: key_ring_id

# Create the IAM client.
iam_client = Google::Cloud::Kms::V1::IAMPolicy::Client.new

# Get the current IAM policy.
policy = iam_client.get_iam_policy resource: resource_name

# Add the member to the policy.
policy.bindings << Google::Iam::V1::Binding.new(
  members: [member],
  role:    "roles/cloudkms.cryptoKeyEncrypterDecrypter"
)

# Save the updated policy.
updated_policy = iam_client.set_iam_policy resource: resource_name, policy: policy
puts "Added #{member}"

REST APIs

JSON API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Create a JSON file that contains the following information:

    {
      "policy": {
        "bindings": {
          "role": "roles/cloudkms.cryptoKeyEncrypterDecrypter",
          "members": "serviceAccount:SERVICE_AGENT_EMAIL_ADDRESS"
        },
      }
    }

    Where SERVICE_AGENT_EMAIL_ADDRESS is the email address associated with your service agent. For example, service-7550275089395@gs-project-accounts.iam.gserviceaccount.com.

  3. Use cURL to call the Cloud KMS API with a POST setIamPolicy request:

    curl -X POST --data-binary @JSON_FILE_NAME \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: application/json" \
    "https://cloudkms.googleapis.com/v1/KEY_RESOURCE:setIamPolicy"

    Where:

    • JSON_FILE_NAME is the path for the JSON file that you created in Step 2.
    • KEY_RESOURCE is your Cloud KMS key resource.

XML API

The XML API cannot be used to assign a Cloud KMS to a service agent. Use one of the other Cloud Storage tools, such as the gcloud CLI, instead.

Use default encryption keys

Set the default key for a bucket

To add, change, or remove the Cloud KMS key that is used by default when objects are written to a bucket:

Console

  1. In the Google Cloud console, go to the Cloud Storage Buckets page.

    Go to Buckets

  2. In the list of buckets, click the name of the desired bucket.

  3. In the Bucket details page, click the Configuration tab.

  4. Click the Pencil icon associated with the Encryption type entry.

  5. Set or remove the default Cloud KMS key for the bucket.

    1. If the bucket isn't currently using a Cloud KMS key, select the Customer-managed key radio button, then select one of the available keys in the associated drop-down menu.

    2. If the bucket currently uses a Cloud KMS key, change the Cloud KMS key in the drop-down menu, or remove the Cloud KMS key by selecting the Google-managed key radio button.

  6. Click Save.

To learn how to get detailed error information about failed Cloud Storage operations in the Google Cloud console, see Troubleshooting.

Command line

Use the gcloud storage buckets update command with the appropriate flag:

gcloud storage buckets update gs://BUCKET_NAME FLAG

Where:

  • BUCKET_NAME is the name of the relevant bucket. For example, my-bucket.

  • FLAG is the desired setting for the default key on the bucket. Use one of the following formats:

    • --default-encryption-key= and a Cloud KMS key resource, if you want to add or change a default key.
    • --clear-default-encryption-key, if you want to remove the default key on the bucket.

If successful, the response looks like:

Updating gs://my-bucket/...
  Completed 1  

Client libraries

C++

For more information, see the Cloud Storage C++ API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

The following sample sets a default customer-managed encryption key on a bucket:

namespace gcs = ::google::cloud::storage;
using ::google::cloud::StatusOr;
[](gcs::Client client, std::string const& bucket_name,
   std::string const& key_name) {
  StatusOr<gcs::BucketMetadata> updated = client.PatchBucket(
      bucket_name, gcs::BucketMetadataPatchBuilder().SetEncryption(
                       gcs::BucketEncryption{key_name}));
  if (!updated) throw std::move(updated).status();

  if (!updated->has_encryption()) {
    std::cerr << "The change to set the encryption attribute on bucket "
              << updated->name()
              << " was successful, but the encryption is not set."
              << "This is unexpected, maybe a concurrent change?\n";
    return;
  }

  std::cout << "Successfully set default KMS key on bucket "
            << updated->name() << " to "
            << updated->encryption().default_kms_key_name << "."
            << "\nFull metadata: " << *updated << "\n";
}

The following sample removes the default customer-managed encryption key from a bucket:

namespace gcs = ::google::cloud::storage;
using ::google::cloud::StatusOr;
[](gcs::Client client, std::string const& bucket_name) {
  StatusOr<gcs::BucketMetadata> updated = client.PatchBucket(
      bucket_name, gcs::BucketMetadataPatchBuilder().ResetEncryption());
  if (!updated) throw std::move(updated).status();

  std::cout << "Successfully removed default KMS key on bucket "
            << updated->name() << "\n";
}

C#

For more information, see the Cloud Storage C# API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

The following sample sets a default customer-managed encryption key on a bucket:


using Google.Apis.Storage.v1.Data;
using Google.Cloud.Storage.V1;
using System;

public class EnableDefaultKMSKeySample
{
    public Bucket EnableDefaultKMSKey(
        string projectId = "your-project-id",
        string bucketName = "your-unique-bucket-name",
        string keyLocation = "us-west1",
        string kmsKeyRing = "kms-key-ring",
        string kmsKeyName = "key-name")
    {
        // KMS Key identifier of an already created KMS key.
        // If you use the Google.Cloud.Kms.V1 library, you can construct these names using helper class CryptoKeyName.
        // var fullKeyName = new CryptoKeyName(projectId, keyLocation, kmsKeyRing, kmsKeyName).ToString();
        string keyPrefix = $"projects/{projectId}/locations/{keyLocation}";
        string fullKeyringName = $"{keyPrefix}/keyRings/{kmsKeyRing}";
        string fullKeyName = $"{fullKeyringName}/cryptoKeys/{kmsKeyName}";
        var storage = StorageClient.Create();
        var bucket = storage.GetBucket(bucketName, new GetBucketOptions { Projection = Projection.Full });
        bucket.Encryption = new Bucket.EncryptionData { DefaultKmsKeyName = fullKeyName };
        var updatedBucket = storage.UpdateBucket(bucket);
        Console.WriteLine($"Default KMS key for {bucketName} was set to {kmsKeyName}.");
        return updatedBucket;
    }
}

The following sample removes the default customer-managed encryption key from a bucket:


using Google.Apis.Storage.v1.Data;
using Google.Cloud.Storage.V1;
using System;

public class BucketDeleteDefaultKmsKeySample
{
    public Bucket BucketDeleteDefaultKmsKey(string bucketName = "your-bucket-name")
    {
        var storage = StorageClient.Create();
        var bucket = storage.GetBucket(bucketName);

        if (bucket.Encryption == null)
        {
            Console.WriteLine("No default kms key to remove");
        }
        else
        {
            bucket.Encryption.DefaultKmsKeyName = null;
            bucket = storage.UpdateBucket(bucket);
            Console.WriteLine($"Default KMS key was removed from {bucketName}. ");
        }

        return bucket;
    }
}

Go

For more information, see the Cloud Storage Go API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

The following sample sets a default customer-managed encryption key on a bucket:

import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/storage"
)

// setBucketDefaultKMSKey sets the Cloud KMS encryption key for the bucket.
func setBucketDefaultKMSKey(w io.Writer, bucketName, keyName string) error {
	// bucketName := "bucket-name"
	// keyName := "key"
	ctx := context.Background()
	client, err := storage.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("storage.NewClient: %w", err)
	}
	defer client.Close()

	ctx, cancel := context.WithTimeout(ctx, time.Second*10)
	defer cancel()

	bucket := client.Bucket(bucketName)
	bucketAttrsToUpdate := storage.BucketAttrsToUpdate{
		Encryption: &storage.BucketEncryption{DefaultKMSKeyName: keyName},
	}
	if _, err := bucket.Update(ctx, bucketAttrsToUpdate); err != nil {
		return fmt.Errorf("Bucket(%q).Update: %w", bucketName, err)
	}
	fmt.Fprintf(w, "Default KMS Key Name: %v", bucketAttrsToUpdate.Encryption.DefaultKMSKeyName)
	return nil
}

The following sample removes the default customer-managed encryption key from a bucket:

import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/storage"
)

// removeBucketDefaultKMSKey removes any default Cloud KMS key set on a bucket.
func removeBucketDefaultKMSKey(w io.Writer, bucketName string) error {
	// bucketName := "bucket-name"
	ctx := context.Background()
	client, err := storage.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("storage.NewClient: %w", err)
	}
	defer client.Close()

	ctx, cancel := context.WithTimeout(ctx, time.Second*10)
	defer cancel()

	bucket := client.Bucket(bucketName)
	bucketAttrsToUpdate := storage.BucketAttrsToUpdate{
		Encryption: &storage.BucketEncryption{},
	}
	if _, err := bucket.Update(ctx, bucketAttrsToUpdate); err != nil {
		return fmt.Errorf("Bucket(%q).Update: %w", bucketName, err)
	}
	fmt.Fprintf(w, "Default KMS key was removed from: %v", bucketName)
	return nil
}

Java

For more information, see the Cloud Storage Java API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

The following sample sets a default customer-managed encryption key on a bucket:


import com.google.cloud.storage.Bucket;
import com.google.cloud.storage.Storage;
import com.google.cloud.storage.Storage.BucketTargetOption;
import com.google.cloud.storage.StorageException;
import com.google.cloud.storage.StorageOptions;

public class SetBucketDefaultKmsKey {
  public static void setBucketDefaultKmsKey(String projectId, String bucketName, String kmsKeyName)
      throws StorageException {
    // The ID of your GCP project
    // String projectId = "your-project-id";

    // The ID of your GCS bucket
    // String bucketName = "your-unique-bucket-name";

    // The name of the KMS key to use as a default
    // String kmsKeyName =
    // "projects/your-project-id/locations/us/keyRings/my_key_ring/cryptoKeys/my_key"

    Storage storage = StorageOptions.newBuilder().setProjectId(projectId).build().getService();
    // first look up the bucket, so we will have its metageneration
    Bucket bucket = storage.get(bucketName);

    Bucket updated =
        storage.update(
            bucket.toBuilder().setDefaultKmsKeyName(kmsKeyName).build(),
            BucketTargetOption.metagenerationMatch());

    System.out.println(
        "KMS Key "
            + updated.getDefaultKmsKeyName()
            + "was set to default for bucket "
            + bucketName);
  }
}

The following sample removes the default customer-managed encryption key from a bucket:

import com.google.cloud.storage.Bucket;
import com.google.cloud.storage.Storage;
import com.google.cloud.storage.Storage.BucketTargetOption;
import com.google.cloud.storage.StorageOptions;

public class RemoveBucketDefaultKmsKey {
  public static void removeBucketDefaultKmsKey(String projectId, String bucketName) {
    // The ID of your GCP project
    // String projectId = "your-project-id";

    // The ID of your GCS bucket
    // String bucketName = "your-unique-bucket-name";

    Storage storage = StorageOptions.newBuilder().setProjectId(projectId).build().getService();
    // first look up the bucket, so we will have its metageneration
    Bucket bucket = storage.get(bucketName);
    storage.update(
        bucket.toBuilder().setDefaultKmsKeyName(null).build(),
        BucketTargetOption.metagenerationMatch());

    System.out.println("Default KMS key was removed from " + bucketName);
  }
}

Node.js

For more information, see the Cloud Storage Node.js API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

The following sample sets a default customer-managed encryption key on a bucket:

/**
 * TODO(developer): Uncomment the following lines before running the sample.
 */
// The ID of your GCS bucket
// const bucketName = 'your-unique-bucket-name';

// The name of the KMS-key to use as a default
// const defaultKmsKeyName = 'my-key';

// Imports the Google Cloud client library
const {Storage} = require('@google-cloud/storage');

// Creates a client
const storage = new Storage();

async function enableDefaultKMSKey() {
  await storage.bucket(bucketName).setMetadata({
    encryption: {
      defaultKmsKeyName,
    },
  });

  console.log(
    `Default KMS key for ${bucketName} was set to ${defaultKmsKeyName}.`
  );
}

enableDefaultKMSKey().catch(console.error);

The following sample removes the default customer-managed encryption key from a bucket:

/**
 * TODO(developer): Uncomment the following lines before running the sample.
 */
// The ID of your GCS bucket
// const bucketName = 'your-unique-bucket-name';

// Imports the Google Cloud client library
const {Storage} = require('@google-cloud/storage');

// Creates a client
const storage = new Storage();

async function removeDefaultKMSKey() {
  await storage.bucket(bucketName).setMetadata({
    encryption: {
      defaultKmsKeyName: null,
    },
  });

  console.log(`Default KMS key was removed from ${bucketName}`);
}

removeDefaultKMSKey().catch(console.error);

PHP

For more information, see the Cloud Storage PHP API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

The following sample sets a default customer-managed encryption key on a bucket:

use Google\Cloud\Storage\StorageClient;

/**
 * Enable a bucket's requesterpays metadata.
 *
 * @param string $bucketName The name of your Cloud Storage bucket.
 *        (e.g. 'my-bucket')
 * @param string $kmsKeyName The KMS key to use as the default KMS key.
 *     Key names are provided in the following format:
 *     `projects/<PROJECT>/locations/<LOCATION>/keyRings/<RING_NAME>/cryptoKeys/<KEY_NAME>`.
 */
function enable_default_kms_key(string $bucketName, string $kmsKeyName): void
{
    $storage = new StorageClient();
    $bucket = $storage->bucket($bucketName);
    $bucket->update([
        'encryption' => [
            'defaultKmsKeyName' => $kmsKeyName
        ]
    ]);
    printf('Default KMS key for %s was set to %s' . PHP_EOL,
        $bucketName,
        $bucket->info()['encryption']['defaultKmsKeyName']);
}

The following sample removes the default customer-managed encryption key from a bucket:

use Google\Cloud\Storage\StorageClient;

/**
 * Delete the default KMS key on the given bucket.
 *
 * @param string $bucketName The name of your Cloud Storage bucket.
 *        (e.g. 'my-bucket')
 */
function bucket_delete_default_kms_key(string $bucketName): void
{
    $storage = new StorageClient();
    $bucket = $storage->bucket($bucketName);

    $objects = $bucket->objects([
        'encryption' => [
            'defaultKmsKeyName' => null,
        ]
    ]);

    printf('Default KMS key was removed from %s', $bucketName);
}

Python

For more information, see the Cloud Storage Python API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

The following sample sets a default customer-managed encryption key on a bucket:

from google.cloud import storage


def enable_default_kms_key(bucket_name, kms_key_name):
    """Sets a bucket's default KMS key."""
    # bucket_name = "your-bucket-name"
    # kms_key_name = "projects/PROJ/locations/LOC/keyRings/RING/cryptoKey/KEY"

    storage_client = storage.Client()
    bucket = storage_client.get_bucket(bucket_name)
    bucket.default_kms_key_name = kms_key_name
    bucket.patch()

    print(
        "Set default KMS key for bucket {} to {}.".format(
            bucket.name, bucket.default_kms_key_name
        )
    )

The following sample removes the default customer-managed encryption key from a bucket:

from google.cloud import storage


def bucket_delete_default_kms_key(bucket_name):
    """Delete a default KMS key of bucket"""
    # bucket_name = "your-bucket-name"

    storage_client = storage.Client()

    bucket = storage_client.get_bucket(bucket_name)
    bucket.default_kms_key_name = None
    bucket.patch()

    print(f"Default KMS key was removed from {bucket.name}")
    return bucket

Ruby

For more information, see the Cloud Storage Ruby API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

The following sample sets a default customer-managed encryption key on a bucket:

def set_bucket_default_kms_key bucket_name:, default_kms_key:
  # The ID of your GCS bucket
  # bucket_name = "your-unique-bucket-name"

  # The name of the KMS key to manage this object with
  # default_kms_key = "projects/your-project-id/locations/global/keyRings/your-key-ring/cryptoKeys/your-key"

  require "google/cloud/storage"

  storage = Google::Cloud::Storage.new
  bucket  = storage.bucket bucket_name

  bucket.default_kms_key = default_kms_key

  puts "Default KMS key for #{bucket.name} was set to #{bucket.default_kms_key}"
end

The following sample removes the default customer-managed encryption key from a bucket:

def bucket_delete_default_kms_key bucket_name:
  # The ID of your GCS bucket
  # bucket_name = "your-unique-bucket-name"

  require "google/cloud/storage"

  storage = Google::Cloud::Storage.new
  bucket = storage.bucket bucket_name

  bucket.default_kms_key = nil

  puts "Default KMS key was removed from #{bucket_name}"
end

REST APIs

JSON API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Create a JSON file that contains the following information:

    {
      "encryption": {
        "defaultKmsKeyName": "KEY_RESOURCE"
      }
    }

    Where KEY_RESOURCE is your Cloud KMS key resource.

    To remove the default Cloud KMS key from a bucket, use the following in the JSON file:

    {
      "encryption": {
        "defaultKmsKeyName": null
      }
    }
  3. Use cURL to call the JSON API with a PATCH Bucket request:

    curl -X PATCH --data-binary @JSON_FILE_NAME \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: application/json" \
    "https://storage.googleapis.com/storage/v1/b/BUCKET_NAME?fields=encryption"

    Where:

    • JSON_FILE_NAME is the path for the JSON file that you created in Step 2.
    • BUCKET_NAME is the name of the relevant bucket. For example, my-bucket.

XML API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Create an XML file that contains the following information:

    <EncryptionConfiguration>
      <DefaultKmsKeyName>KEY_RESOURCE</DefaultKmsKeyName>
    </EncryptionConfiguration>

    Where KEY_RESOURCE is your Cloud KMS key resource.

    To remove the default Cloud KMS key from a bucket, use the following in the XML file:

    <EncryptionConfiguration></EncryptionConfiguration>
  3. Use cURL to call the XML API with a PUT Bucket request and encryptionConfig query string parameter:

    curl -X PUT --data-binary @XML_FILE_NAME \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    "https://storage.googleapis.com/BUCKET_NAME?encryptionConfig"

    Where:

    • XML_FILE_NAME is the path for the XML file that you created in Step 2.
    • BUCKET_NAME is the name of the relevant bucket. For example, my-bucket.

View the default key for a bucket

To view the Cloud KMS key that is currently set as default for your bucket:

Console

  1. In the Google Cloud console, go to the Cloud Storage Buckets page.

    Go to Buckets

  2. In the list of buckets, click the name of the desired bucket.

  3. In the Bucket details page, click the Configuration tab.

  4. The current default key for your bucket appears in the Encryption key field.

To learn how to get detailed error information about failed Cloud Storage operations in the Google Cloud console, see Troubleshooting.

Command line

Use the gcloud storage buckets describe command with the --format flag:

gcloud storage buckets describe gs://BUCKET_NAME --format="default(default_kms_key)"

Where BUCKET_NAME is the name of the bucket whose key you want to view. For example, my-bucket.

If successful, the response looks like:

default_kms_key: KEY_RESOURCE

Client libraries

C++

For more information, see the Cloud Storage C++ API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

namespace gcs = ::google::cloud::storage;
using ::google::cloud::StatusOr;
[](gcs::Client client, std::string const& bucket_name) {
  StatusOr<gcs::BucketMetadata> metadata =
      client.GetBucketMetadata(bucket_name);
  if (!metadata) throw std::move(metadata).status();

  if (!metadata->has_encryption()) {
    std::cout << "The bucket " << metadata->name()
              << " does not have a default KMS key set.\n";
    return;
  }

  std::cout << "The default KMS key for bucket " << metadata->name()
            << " is: " << metadata->encryption().default_kms_key_name << "\n";
}

C#

For more information, see the Cloud Storage C# API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the default KMS key, follow the instructions for displaying a bucket's metadata and look for the default KMS key field in the response.

using Google.Apis.Storage.v1.Data;
using Google.Cloud.Storage.V1;
using System;

public class GetBucketMetadataSample
{
    public Bucket GetBucketMetadata(string bucketName = "your-unique-bucket-name")
    {
        var storage = StorageClient.Create();
        var bucket = storage.GetBucket(bucketName, new GetBucketOptions { Projection = Projection.Full });
        Console.WriteLine($"Bucket:\t{bucket.Name}");
        Console.WriteLine($"Acl:\t{bucket.Acl}");
        Console.WriteLine($"Billing:\t{bucket.Billing}");
        Console.WriteLine($"Cors:\t{bucket.Cors}");
        Console.WriteLine($"DefaultEventBasedHold:\t{bucket.DefaultEventBasedHold}");
        Console.WriteLine($"DefaultObjectAcl:\t{bucket.DefaultObjectAcl}");
        Console.WriteLine($"Encryption:\t{bucket.Encryption}");
        if (bucket.Encryption != null)
        {
            Console.WriteLine($"KmsKeyName:\t{bucket.Encryption.DefaultKmsKeyName}");
        }
        Console.WriteLine($"Id:\t{bucket.Id}");
        Console.WriteLine($"Kind:\t{bucket.Kind}");
        Console.WriteLine($"Lifecycle:\t{bucket.Lifecycle}");
        Console.WriteLine($"Location:\t{bucket.Location}");
        Console.WriteLine($"LocationType:\t{bucket.LocationType}");
        Console.WriteLine($"Logging:\t{bucket.Logging}");
        Console.WriteLine($"Metageneration:\t{bucket.Metageneration}");
        Console.WriteLine($"ObjectRetention:\t{bucket.ObjectRetention}");
        Console.WriteLine($"Owner:\t{bucket.Owner}");
        Console.WriteLine($"ProjectNumber:\t{bucket.ProjectNumber}");
        Console.WriteLine($"RetentionPolicy:\t{bucket.RetentionPolicy}");
        Console.WriteLine($"SelfLink:\t{bucket.SelfLink}");
        Console.WriteLine($"StorageClass:\t{bucket.StorageClass}");
        Console.WriteLine($"TimeCreated:\t{bucket.TimeCreated}");
        Console.WriteLine($"Updated:\t{bucket.Updated}");
        Console.WriteLine($"Versioning:\t{bucket.Versioning}");
        Console.WriteLine($"Website:\t{bucket.Website}");
        Console.WriteLine($"TurboReplication:\t{bucket.Rpo}");
        if (bucket.Labels != null)
        {
            Console.WriteLine("Labels:");
            foreach (var label in bucket.Labels)
            {
                Console.WriteLine($"{label.Key}:\t{label.Value}");
            }
        }
        return bucket;
    }
}

Go

For more information, see the Cloud Storage Go API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the default KMS key, follow the instructions for displaying a bucket's metadata and look for the default KMS key field in the response.
import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/storage"
)

// getBucketMetadata gets the bucket metadata.
func getBucketMetadata(w io.Writer, bucketName string) (*storage.BucketAttrs, error) {
	// bucketName := "bucket-name"
	ctx := context.Background()
	client, err := storage.NewClient(ctx)
	if err != nil {
		return nil, fmt.Errorf("storage.NewClient: %w", err)
	}
	defer client.Close()

	ctx, cancel := context.WithTimeout(ctx, time.Second*10)
	defer cancel()
	attrs, err := client.Bucket(bucketName).Attrs(ctx)
	if err != nil {
		return nil, fmt.Errorf("Bucket(%q).Attrs: %w", bucketName, err)
	}
	fmt.Fprintf(w, "BucketName: %v\n", attrs.Name)
	fmt.Fprintf(w, "Location: %v\n", attrs.Location)
	fmt.Fprintf(w, "LocationType: %v\n", attrs.LocationType)
	fmt.Fprintf(w, "StorageClass: %v\n", attrs.StorageClass)
	fmt.Fprintf(w, "Turbo replication (RPO): %v\n", attrs.RPO)
	fmt.Fprintf(w, "TimeCreated: %v\n", attrs.Created)
	fmt.Fprintf(w, "Metageneration: %v\n", attrs.MetaGeneration)
	fmt.Fprintf(w, "PredefinedACL: %v\n", attrs.PredefinedACL)
	if attrs.Encryption != nil {
		fmt.Fprintf(w, "DefaultKmsKeyName: %v\n", attrs.Encryption.DefaultKMSKeyName)
	}
	if attrs.Website != nil {
		fmt.Fprintf(w, "IndexPage: %v\n", attrs.Website.MainPageSuffix)
		fmt.Fprintf(w, "NotFoundPage: %v\n", attrs.Website.NotFoundPage)
	}
	fmt.Fprintf(w, "DefaultEventBasedHold: %v\n", attrs.DefaultEventBasedHold)
	if attrs.RetentionPolicy != nil {
		fmt.Fprintf(w, "RetentionEffectiveTime: %v\n", attrs.RetentionPolicy.EffectiveTime)
		fmt.Fprintf(w, "RetentionPeriod: %v\n", attrs.RetentionPolicy.RetentionPeriod)
		fmt.Fprintf(w, "RetentionPolicyIsLocked: %v\n", attrs.RetentionPolicy.IsLocked)
	}
	fmt.Fprintf(w, "ObjectRetentionMode: %v\n", attrs.ObjectRetentionMode)
	fmt.Fprintf(w, "RequesterPays: %v\n", attrs.RequesterPays)
	fmt.Fprintf(w, "VersioningEnabled: %v\n", attrs.VersioningEnabled)
	if attrs.Logging != nil {
		fmt.Fprintf(w, "LogBucket: %v\n", attrs.Logging.LogBucket)
		fmt.Fprintf(w, "LogObjectPrefix: %v\n", attrs.Logging.LogObjectPrefix)
	}
	if attrs.CORS != nil {
		fmt.Fprintln(w, "CORS:")
		for _, v := range attrs.CORS {
			fmt.Fprintf(w, "\tMaxAge: %v\n", v.MaxAge)
			fmt.Fprintf(w, "\tMethods: %v\n", v.Methods)
			fmt.Fprintf(w, "\tOrigins: %v\n", v.Origins)
			fmt.Fprintf(w, "\tResponseHeaders: %v\n", v.ResponseHeaders)
		}
	}
	if attrs.Labels != nil {
		fmt.Fprintf(w, "\n\n\nLabels:")
		for key, value := range attrs.Labels {
			fmt.Fprintf(w, "\t%v = %v\n", key, value)
		}
	}
	return attrs, nil
}

Java

For more information, see the Cloud Storage Java API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the default KMS key, follow the instructions for displaying a bucket's metadata and look for the default KMS key field in the response.

import com.google.cloud.storage.Bucket;
import com.google.cloud.storage.BucketInfo;
import com.google.cloud.storage.Storage;
import com.google.cloud.storage.StorageOptions;
import java.util.Map;

public class GetBucketMetadata {
  public static void getBucketMetadata(String projectId, String bucketName) {
    // The ID of your GCP project
    // String projectId = "your-project-id";

    // The ID of your GCS bucket
    // String bucketName = "your-unique-bucket-name";

    Storage storage = StorageOptions.newBuilder().setProjectId(projectId).build().getService();

    // Select all fields. Fields can be selected individually e.g. Storage.BucketField.NAME
    Bucket bucket =
        storage.get(bucketName, Storage.BucketGetOption.fields(Storage.BucketField.values()));

    // Print bucket metadata
    System.out.println("BucketName: " + bucket.getName());
    System.out.println("DefaultEventBasedHold: " + bucket.getDefaultEventBasedHold());
    System.out.println("DefaultKmsKeyName: " + bucket.getDefaultKmsKeyName());
    System.out.println("Id: " + bucket.getGeneratedId());
    System.out.println("IndexPage: " + bucket.getIndexPage());
    System.out.println("Location: " + bucket.getLocation());
    System.out.println("LocationType: " + bucket.getLocationType());
    System.out.println("Metageneration: " + bucket.getMetageneration());
    System.out.println("NotFoundPage: " + bucket.getNotFoundPage());
    System.out.println("RetentionEffectiveTime: " + bucket.getRetentionEffectiveTime());
    System.out.println("RetentionPeriod: " + bucket.getRetentionPeriod());
    System.out.println("RetentionPolicyIsLocked: " + bucket.retentionPolicyIsLocked());
    System.out.println("RequesterPays: " + bucket.requesterPays());
    System.out.println("SelfLink: " + bucket.getSelfLink());
    System.out.println("StorageClass: " + bucket.getStorageClass().name());
    System.out.println("TimeCreated: " + bucket.getCreateTime());
    System.out.println("VersioningEnabled: " + bucket.versioningEnabled());
    System.out.println("ObjectRetention: " + bucket.getObjectRetention());
    if (bucket.getLabels() != null) {
      System.out.println("\n\n\nLabels:");
      for (Map.Entry<String, String> label : bucket.getLabels().entrySet()) {
        System.out.println(label.getKey() + "=" + label.getValue());
      }
    }
    if (bucket.getLifecycleRules() != null) {
      System.out.println("\n\n\nLifecycle Rules:");
      for (BucketInfo.LifecycleRule rule : bucket.getLifecycleRules()) {
        System.out.println(rule);
      }
    }
  }
}

Node.js

For more information, see the Cloud Storage Node.js API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the default KMS key, follow the instructions for displaying a bucket's metadata and look for the default KMS key field in the response.
// Imports the Google Cloud client library
const {Storage} = require('@google-cloud/storage');

// Creates a client
const storage = new Storage();

async function getBucketMetadata() {
  /**
   * TODO(developer): Uncomment the following lines before running the sample.
   */
  // The ID of your GCS bucket
  // const bucketName = 'your-unique-bucket-name';

  // Get Bucket Metadata
  const [metadata] = await storage.bucket(bucketName).getMetadata();

  console.log(JSON.stringify(metadata, null, 2));
}

PHP

For more information, see the Cloud Storage PHP API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the default KMS key, follow the instructions for displaying a bucket's metadata and look for the default KMS key field in the response.
use Google\Cloud\Storage\StorageClient;

/**
 * Get bucket metadata.
 *
 * @param string $bucketName The name of your Cloud Storage bucket.
 *        (e.g. 'my-bucket')
 */
function get_bucket_metadata(string $bucketName): void
{
    $storage = new StorageClient();
    $bucket = $storage->bucket($bucketName);
    $info = $bucket->info();

    printf('Bucket Metadata: %s' . PHP_EOL, print_r($info));
}

Python

For more information, see the Cloud Storage Python API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the default KMS key, follow the instructions for displaying a bucket's metadata and look for the default KMS key field in the response.

from google.cloud import storage


def bucket_metadata(bucket_name):
    """Prints out a bucket's metadata."""
    # bucket_name = 'your-bucket-name'

    storage_client = storage.Client()
    bucket = storage_client.get_bucket(bucket_name)

    print(f"ID: {bucket.id}")
    print(f"Name: {bucket.name}")
    print(f"Storage Class: {bucket.storage_class}")
    print(f"Location: {bucket.location}")
    print(f"Location Type: {bucket.location_type}")
    print(f"Cors: {bucket.cors}")
    print(f"Default Event Based Hold: {bucket.default_event_based_hold}")
    print(f"Default KMS Key Name: {bucket.default_kms_key_name}")
    print(f"Metageneration: {bucket.metageneration}")
    print(
        f"Public Access Prevention: {bucket.iam_configuration.public_access_prevention}"
    )
    print(f"Retention Effective Time: {bucket.retention_policy_effective_time}")
    print(f"Retention Period: {bucket.retention_period}")
    print(f"Retention Policy Locked: {bucket.retention_policy_locked}")
    print(f"Object Retention Mode: {bucket.object_retention_mode}")
    print(f"Requester Pays: {bucket.requester_pays}")
    print(f"Self Link: {bucket.self_link}")
    print(f"Time Created: {bucket.time_created}")
    print(f"Versioning Enabled: {bucket.versioning_enabled}")
    print(f"Labels: {bucket.labels}")

Ruby

For more information, see the Cloud Storage Ruby API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the default KMS key, follow the instructions for displaying a bucket's metadata and look for the default KMS key field in the response.
def get_bucket_metadata bucket_name:
  # The ID of your GCS bucket
  # bucket_name = "your-unique-bucket-name"

  require "google/cloud/storage"

  storage = Google::Cloud::Storage.new
  bucket  = storage.bucket bucket_name

  puts "ID:                       #{bucket.id}"
  puts "Name:                     #{bucket.name}"
  puts "Storage Class:            #{bucket.storage_class}"
  puts "Location:                 #{bucket.location}"
  puts "Location Type:            #{bucket.location_type}"
  puts "Cors:                     #{bucket.cors}"
  puts "Default Event Based Hold: #{bucket.default_event_based_hold?}"
  puts "Default KMS Key Name:     #{bucket.default_kms_key}"
  puts "Logging Bucket:           #{bucket.logging_bucket}"
  puts "Logging Prefix:           #{bucket.logging_prefix}"
  puts "Metageneration:           #{bucket.metageneration}"
  puts "Retention Effective Time: #{bucket.retention_effective_at}"
  puts "Retention Period:         #{bucket.retention_period}"
  puts "Retention Policy Locked:  #{bucket.retention_policy_locked?}"
  puts "Requester Pays:           #{bucket.requester_pays}"
  puts "Self Link:                #{bucket.api_url}"
  puts "Time Created:             #{bucket.created_at}"
  puts "Versioning Enabled:       #{bucket.versioning?}"
  puts "Index Page:               #{bucket.website_main}"
  puts "Not Found Page:           #{bucket.website_404}"
  puts "Labels:"
  bucket.labels.each do |key, value|
    puts " - #{key} = #{value}"
  end
  puts "Lifecycle Rules:"
  bucket.lifecycle.each do |rule|
    puts "#{rule.action} - #{rule.storage_class} - #{rule.age} - #{rule.matches_storage_class}"
  end
end

REST APIs

JSON API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Use cURL to call the JSON API with a GET Bucket request that includes the desired fields:

    curl -X GET -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    "https://storage.googleapis.com/storage/v1/b/BUCKET_NAME?fields=encryption"

    Where BUCKET_NAME is the name of the bucket whose key you want to view. For example, my-bucket.

    The response looks like the following example:

    {
      "encryption" : {
         "defaultKmsKeyName": "KEY_RESOURCE"
       },
    }

XML API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Use cURL to call the XML API with a GET Bucket request that includes the encryption query parameter:

    curl -X GET -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    "https://storage.googleapis.com/BUCKET_NAME?encryptionConfig"

    Where BUCKET_NAME is the name of the bucket whose key you want to view. For example, my-bucket.

    The response looks like the following example:

    <EncryptionConfiguration>
      <DefaultKmsKeyName>KEY_RESOURCE</DefaultKmsKeyName>
    </EncryptionConfiguration>

Encrypt an object with a Cloud KMS key

You can encrypt an individual object with a Cloud KMS key. This is useful if you want to use a different key from the default key set on the bucket, or if you don't have a default key set on the bucket. The name of the key resource used to encrypt the object is stored in the object's metadata.

Console

The Google Cloud console cannot be used to specify Cloud KMS keys on a per-object basis. Use the gcloud CLI or the client libraries instead.

Command line

Use the gcloud storage cp command with the --encryption-key flag:

gcloud storage cp SOURCE_DATA gs://BUCKET_NAME/OBJECT_NAME --encryption-key=KEY_RESOURCE

Where:

  • SOURCE_DATA is the source location of the data you're encrypting. This can be any source location supported by the cp command. For example gs://my-bucket/pets/old-dog.png.
  • BUCKET_NAME is the name of the destination bucket for this copy command. For example, my-bucket.
  • OBJECT_NAME is the name of the final, encrypted object. For example, pets/new-dog.png.
  • KEY_RESOURCE is the Cloud KMS key resource you want to use for encrypting the object.

Client libraries

C++

For more information, see the Cloud Storage C++ API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

namespace gcs = ::google::cloud::storage;
using ::google::cloud::StatusOr;
[](gcs::Client client, std::string const& bucket_name,
   std::string const& object_name, std::string const& kms_key_name) {
  gcs::ObjectWriteStream stream = client.WriteObject(
      bucket_name, object_name, gcs::KmsKeyName(kms_key_name));

  // Line numbers start at 1.
  for (int lineno = 1; lineno <= 10; ++lineno) {
    stream << lineno << ": placeholder text for CMEK example.\n";
  }

  stream.Close();

  StatusOr<gcs::ObjectMetadata> metadata = std::move(stream).metadata();
  if (!metadata) throw std::move(metadata).status();

  std::cout << "Successfully wrote to object " << metadata->name()
            << " its size is: " << metadata->size()
            << "\nFull metadata: " << *metadata << "\n";
}

C#

For more information, see the Cloud Storage C# API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.


using Google.Cloud.Storage.V1;
using System;
using System.IO;

public class UploadFileWithKmsKeySample
{
    public void UploadFileWithKmsKey(
        string projectId = "your-project-id",
        string bucketName = "your-unique-bucket-name",
        string keyLocation = "us-west1",
        string kmsKeyRing = "kms-key-ring",
        string kmsKeyName = "key-name",
        string localPath = "my-local-path/my-file-name",
        string objectName = "my-file-name")
    {
        // KMS Key identifier of an already created KMS key.
        // If you use the Google.Cloud.Kms.V1 library, you can construct these names using helper class CryptoKeyName.
        // var fullKeyName = new CryptoKeyName(projectId, keyLocation, kmsKeyRing, kmsKeyName).ToString();
        string keyPrefix = $"projects/{projectId}/locations/{keyLocation}";
        string fullKeyringName = $"{keyPrefix}/keyRings/{kmsKeyRing}";
        string fullKeyName = $"{fullKeyringName}/cryptoKeys/{kmsKeyName}";

        var storage = StorageClient.Create();
        using var fileStream = File.OpenRead(localPath);
        storage.UploadObject(bucketName, objectName, null, fileStream, new UploadObjectOptions { KmsKeyName = fullKeyName });
        Console.WriteLine($"Uploaded {objectName}.");
    }
}

Go

For more information, see the Cloud Storage Go API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/storage"
)

// uploadWithKMSKey writes an object using Cloud KMS encryption.
func uploadWithKMSKey(w io.Writer, bucket, object, keyName string) error {
	// bucket := "bucket-name"
	// object := "object-name"
	// keyName := "projects/projectId/locations/global/keyRings/keyRingID/cryptoKeys/cryptoKeyID"
	ctx := context.Background()
	client, err := storage.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("storage.NewClient: %w", err)
	}
	defer client.Close()

	ctx, cancel := context.WithTimeout(ctx, time.Second*50)
	defer cancel()

	o := client.Bucket(bucket).Object(object)

	// Optional: set a generation-match precondition to avoid potential race
	// conditions and data corruptions. The request to upload is aborted if the
	// object's generation number does not match your precondition.
	// For an object that does not yet exist, set the DoesNotExist precondition.
	o = o.If(storage.Conditions{DoesNotExist: true})
	// If the live object already exists in your bucket, set instead a
	// generation-match precondition using the live object's generation number.
	// attrs, err := o.Attrs(ctx)
	// if err != nil {
	// 	return fmt.Errorf("object.Attrs: %w", err)
	// }
	// o = o.If(storage.Conditions{GenerationMatch: attrs.Generation})

	// Encrypt the object's contents.
	wc := o.NewWriter(ctx)
	wc.KMSKeyName = keyName
	if _, err := wc.Write([]byte("top secret")); err != nil {
		return fmt.Errorf("Writer.Write: %w", err)
	}
	if err := wc.Close(); err != nil {
		return fmt.Errorf("Writer.Close: %w", err)
	}
	fmt.Fprintf(w, "Uploaded blob %v with KMS key.\n", object)
	return nil
}

Java

For more information, see the Cloud Storage Java API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.


import static java.nio.charset.StandardCharsets.UTF_8;

import com.google.cloud.storage.BlobId;
import com.google.cloud.storage.BlobInfo;
import com.google.cloud.storage.Storage;
import com.google.cloud.storage.StorageOptions;

public class UploadKmsEncryptedObject {
  public static void uploadKmsEncryptedObject(
      String projectId, String bucketName, String objectName, String kmsKeyName) {
    // The ID of your GCP project
    // String projectId = "your-project-id";

    // The ID of your GCS bucket
    // String bucketName = "your-unique-bucket-name";

    // The ID of your GCS object
    // String objectName = "your-object-name";

    // The name of the KMS key to encrypt with
    // String kmsKeyName = "projects/my-project/locations/us/keyRings/my_key_ring/cryptoKeys/my_key"

    Storage storage = StorageOptions.newBuilder().setProjectId(projectId).build().getService();
    byte[] data = "Hello, World!".getBytes(UTF_8);

    BlobId blobId = BlobId.of(bucketName, objectName);
    BlobInfo blobInfo = BlobInfo.newBuilder(blobId).setContentType("text/plain").build();

    // Optional: set a generation-match precondition to avoid potential race
    // conditions and data corruptions. The request returns a 412 error if the
    // preconditions are not met.
    Storage.BlobTargetOption precondition;
    if (storage.get(bucketName, objectName) == null) {
      // For a target object that does not yet exist, set the DoesNotExist precondition.
      // This will cause the request to fail if the object is created before the request runs.
      precondition = Storage.BlobTargetOption.doesNotExist();
    } else {
      // If the destination already exists in your bucket, instead set a generation-match
      // precondition. This will cause the request to fail if the existing object's generation
      // changes before the request runs.
      precondition =
          Storage.BlobTargetOption.generationMatch(
              storage.get(bucketName, objectName).getGeneration());
    }

    storage.create(blobInfo, data, Storage.BlobTargetOption.kmsKeyName(kmsKeyName), precondition);

    System.out.println(
        "Uploaded object "
            + objectName
            + " in bucket "
            + bucketName
            + " encrypted with "
            + kmsKeyName);
  }
}

Node.js

For more information, see the Cloud Storage Node.js API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

/**
 * TODO(developer): Uncomment the following lines before running the sample.
 */
// The ID of your GCS bucket
// const bucketName = 'your-unique-bucket-name';

// The path to your file to upload
// const filePath = 'path/to/your/file';

// The name of the KMS-key
// const kmsKeyName = 'my-key';

// Imports the Google Cloud client library
const {Storage} = require('@google-cloud/storage');

// Creates a client
const storage = new Storage();

async function uploadFileWithKmsKey() {
  const options = {
    kmsKeyName,
    // Optional:
    // Set a generation-match precondition to avoid potential race conditions
    // and data corruptions. The request to upload is aborted if the object's
    // generation number does not match your precondition. For a destination
    // object that does not yet exist, set the ifGenerationMatch precondition to 0
    // If the destination object already exists in your bucket, set instead a
    // generation-match precondition using its generation number.
    preconditionOpts: {ifGenerationMatch: generationMatchPrecondition},
  };

  await storage.bucket(bucketName).upload(filePath, options);

  console.log(`${filePath} uploaded to ${bucketName} using ${kmsKeyName}.`);
}

uploadFileWithKmsKey().catch(console.error);

PHP

For more information, see the Cloud Storage PHP API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

use Google\Cloud\Storage\StorageClient;

/**
 * Upload a file using KMS encryption.
 *
 * @param string $bucketName The name of your Cloud Storage bucket.
 *        (e.g. 'my-bucket')
 * @param string $objectName The name of your Cloud Storage object.
 *        (e.g. 'my-object')
 * @param string $source The path to the file to upload.
 *        (e.g. '/path/to/your/file')
 * @param string $kmsKeyName The KMS key used to encrypt objects server side.
 *     Key names are provided in the following format:
 *     `projects/<PROJECT>/locations/<LOCATION>/keyRings/<RING_NAME>/cryptoKeys/<KEY_NAME>`.
 */
function upload_with_kms_key(string $bucketName, string $objectName, string $source, string $kmsKeyName): void
{
    $storage = new StorageClient();
    if (!$file = fopen($source, 'r')) {
        throw new \InvalidArgumentException('Unable to open file for reading');
    }
    $bucket = $storage->bucket($bucketName);
    $object = $bucket->upload($file, [
        'name' => $objectName,
        'destinationKmsKeyName' => $kmsKeyName,
    ]);
    printf('Uploaded %s to gs://%s/%s using encryption key %s' . PHP_EOL,
        basename($source),
        $bucketName,
        $objectName,
        $kmsKeyName);
}

Python

For more information, see the Cloud Storage Python API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

from google.cloud import storage


def upload_blob_with_kms(
    bucket_name, source_file_name, destination_blob_name, kms_key_name,
):
    """Uploads a file to the bucket, encrypting it with the given KMS key."""
    # bucket_name = "your-bucket-name"
    # source_file_name = "local/path/to/file"
    # destination_blob_name = "storage-object-name"
    # kms_key_name = "projects/PROJ/locations/LOC/keyRings/RING/cryptoKey/KEY"

    storage_client = storage.Client()
    bucket = storage_client.bucket(bucket_name)
    blob = bucket.blob(destination_blob_name, kms_key_name=kms_key_name)

    # Optional: set a generation-match precondition to avoid potential race conditions
    # and data corruptions. The request to upload is aborted if the object's
    # generation number does not match your precondition. For a destination
    # object that does not yet exist, set the if_generation_match precondition to 0.
    # If the destination object already exists in your bucket, set instead a
    # generation-match precondition using its generation number.
    generation_match_precondition = 0

    blob.upload_from_filename(source_file_name, if_generation_match=generation_match_precondition)

    print(
        "File {} uploaded to {} with encryption key {}.".format(
            source_file_name, destination_blob_name, kms_key_name
        )
    )

Ruby

For more information, see the Cloud Storage Ruby API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

def upload_with_kms_key bucket_name:, local_file_path:, file_name: nil, kms_key:
  # The ID of your GCS bucket
  # bucket_name = "your-unique-bucket-name"

  # The path to your file to upload
  # local_file_path = "/local/path/to/file.txt"

  # The ID of your GCS object
  # file_name = "your-file-name"

  # The name of the KMS key to manage this object with
  # kms_key = "projects/your-project-id/locations/global/keyRings/your-key-ring/cryptoKeys/your-key"

  require "google/cloud/storage"

  storage = Google::Cloud::Storage.new

  bucket = storage.bucket bucket_name, skip_lookup: true

  file = bucket.create_file local_file_path, file_name, kms_key: kms_key

  puts "Uploaded #{file.name} and encrypted service side using #{file.kms_key}"
end

REST APIs

JSON API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Add the object's data to the request body.

  3. Use cURL to call the JSON API with a POST Object request:

    curl -X POST --data-binary @OBJECT \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: OBJECT_CONTENT_TYPE" \
    "https://storage.googleapis.com/upload/storage/v1/b/BUCKET_NAME/o?uploadType=media&name=OBJECT_NAME&kmsKeyName=KEY_RESOURCE"

    Where:

    • OBJECT is the path to the object you are uploading. For example, Desktop/dog.png.
    • OBJECT_CONTENT_TYPE is the content type of the object. For example, image/png.
    • BUCKET_NAME is the name of the bucket to which you are uploading your object. For example,my-bucket.
    • OBJECT_NAME is the URL-encoded name of the object you are uploading. For example, pets/dog.png, URL-encoded as pets%2Fdog.png.
    • KEY_RESOURCE is the Cloud KMS key resource.

XML API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Add the object's data to the request body.

  3. Use cURL to call the XML API with a PUT Object request:

    curl -X PUT --data-binary @OBJECT \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    -H "Content-Type: OBJECT_CONTENT_TYPE" \
    -H "x-goog-encryption-kms-key-name: KEY_RESOURCE" \
    "https://storage.googleapis.com/BUCKET_NAME/OBJECT_NAME"

    Where:

    • OBJECT is the path to the object you are uploading. For example, Desktop/dog.png.
    • OBJECT_CONTENT_TYPE is the content type of the object. For example, image/png.
    • BUCKET_NAME is the name of the bucket to which you are uploading your object. For example,my-bucket.
    • OBJECT_NAME is the URL-encoded name of the object you are uploading. For example, pets/dog.png, URL-encoded as pets%2Fdog.png.
    • KEY_RESOURCE is your Cloud KMS key resource.

Rotate from a customer-supplied key to a Cloud KMS key

If your objects are encrypted with customer-supplied encryption keys, you can rotate them to use Cloud KMS keys by rewriting the object:

Console

The Google Cloud console cannot be used to change encryption keys on a per-object basis. Use the gcloud CLI or the client libraries instead.

Command line

Use the gcloud storage objects update command with the appropriate flags:

gcloud storage objects update gs://BUCKET_NAME/OBJECT_NAME --encryption-key=KMS_KEY --decryption-keys=CSEK_KEY

Where:

  • BUCKET_NAME is the name of the bucket that contains the object whose key you are rotating. For example, my-bucket.
  • OBJECT_NAME is the name of the object whose key you are rotating. For example, pets/dog.png.
  • KMS_KEY is the Cloud KMS key resource you want to use for encrypting the object.
  • CSEK_KEY is the current customer-supplied encryption key used on the object.

Client libraries

C++

For more information, see the Cloud Storage C++ API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

namespace gcs = ::google::cloud::storage;
using ::google::cloud::StatusOr;
[](gcs::Client client, std::string const& bucket_name,
   std::string const& object_name, std::string const& old_csek_key_base64,
   std::string const& new_cmek_key_name) {
  StatusOr<gcs::ObjectMetadata> metadata = client.RewriteObjectBlocking(
      bucket_name, object_name, bucket_name, object_name,
      gcs::SourceEncryptionKey::FromBase64Key(old_csek_key_base64),
      gcs::DestinationKmsKeyName(new_cmek_key_name));
  if (!metadata) throw std::move(metadata).status();

  std::cout << "Changed object " << metadata->name() << " in bucket "
            << metadata->bucket()
            << " from using CSEK to CMEK key.\nFull Metadata: " << *metadata
            << "\n";
}

C#

For more information, see the Cloud Storage C# API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.


using Google.Cloud.Storage.V1;
using System;
using System.IO;

public class ObjectCsekToCmekSample
{
    public void ObjectCsekToCmek(
        string projectId = "your-project-id",
        string bucketName = "your-unique-bucket-name",
        string objectName = "your-object-name",
        string currrentEncryptionKey = "TIbv/fjexq+VmtXzAlc63J4z5kFmWJ6NdAPQulQBT7g=",
        string keyLocation = "us-west1",
        string kmsKeyRing = "kms-key-ring",
        string kmsKeyName = "key-name")
    {
        string keyPrefix = $"projects/{projectId}/locations/{keyLocation}";
        string fullKeyringName = $"{keyPrefix}/keyRings/{kmsKeyRing}";
        string fullKeyName = $"{fullKeyringName}/cryptoKeys/{kmsKeyName}";
        var storage = StorageClient.Create();

        using var outputStream = new MemoryStream();
        storage.DownloadObject(bucketName, objectName, outputStream, new DownloadObjectOptions()
        {
            EncryptionKey = EncryptionKey.Create(Convert.FromBase64String(currrentEncryptionKey))
        });

        outputStream.Position = 0;

        storage.UploadObject(bucketName, objectName, null, outputStream, new UploadObjectOptions()
        {
            KmsKeyName = fullKeyName
        });

        Console.WriteLine($"Object {objectName} in bucket {bucketName} is now managed" +
            $" by the KMS key ${kmsKeyName}  instead of a customer-supplied encryption key");
    }
}

Go

For more information, see the Cloud Storage Go API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/storage"
)

// сhangeObjectCSEKtoKMS changes the key used to encrypt an object from
// a customer-supplied encryption key to a customer-managed encryption key.
func сhangeObjectCSEKToKMS(w io.Writer, bucket, object string, encryptionKey []byte, kmsKeyName string) error {
	// bucket := "bucket-name"
	// object := "object-name"

	// encryptionKey is the Base64 encoded decryption key, which should be the same
	// key originally used to encrypt the object.
	// encryptionKey := []byte("TIbv/fjexq+VmtXzAlc63J4z5kFmWJ6NdAPQulQBT7g=")

	// kmsKeyName is the name of the KMS key to manage this object with.
	// kmsKeyName := "projects/projectId/locations/global/keyRings/keyRingID/cryptoKeys/cryptoKeyID"
	ctx := context.Background()
	client, err := storage.NewClient(ctx)
	if err != nil {
		return fmt.Errorf("storage.NewClient: %w", err)
	}
	defer client.Close()

	ctx, cancel := context.WithTimeout(ctx, time.Second*10)
	defer cancel()

	o := client.Bucket(bucket).Object(object)

	// Optional: set a generation-match precondition to avoid potential race
	// conditions and data corruptions. The request to copy is aborted if the
	// object's generation number does not match your precondition.
	attrs, err := o.Attrs(ctx)
	if err != nil {
		return fmt.Errorf("object.Attrs: %w", err)
	}
	o = o.If(storage.Conditions{GenerationMatch: attrs.Generation})

	// You can't change an object's encryption key directly. Instead, you must
	// rewrite the object using the new key.
	src := o.Key(encryptionKey)
	c := o.CopierFrom(src)
	c.DestinationKMSKeyName = kmsKeyName
	if _, err := c.Run(ctx); err != nil {
		return fmt.Errorf("Copier.Run: %w", err)
	}
	fmt.Fprintf(w, "Object %v in bucket %v is now managed by the KMS key %v instead of a customer-supplied encryption key\n", object, bucket, kmsKeyName)
	return nil
}

Java

For more information, see the Cloud Storage Java API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

import com.google.cloud.storage.Blob;
import com.google.cloud.storage.BlobId;
import com.google.cloud.storage.Storage;
import com.google.cloud.storage.StorageOptions;

public class ChangeObjectCsekToKms {
  public static void changeObjectFromCsekToKms(
      String projectId,
      String bucketName,
      String objectName,
      String decryptionKey,
      String kmsKeyName) {
    // The ID of your GCP project
    // String projectId = "your-project-id";

    // The ID of your GCS bucket
    // String bucketName = "your-unique-bucket-name";

    // The ID of your GCS object
    // String objectName = "your-object-name";

    // The Base64 encoded decryption key, which should be the same key originally used to encrypt
    // the object
    // String decryptionKey = "TIbv/fjexq+VmtXzAlc63J4z5kFmWJ6NdAPQulQBT7g=";

    // The name of the KMS key to manage this object with
    // String kmsKeyName =
    // "projects/your-project-id/locations/global/keyRings/your-key-ring/cryptoKeys/your-key";

    Storage storage = StorageOptions.newBuilder().setProjectId(projectId).build().getService();
    BlobId blobId = BlobId.of(bucketName, objectName);
    Blob blob = storage.get(blobId);
    if (blob == null) {
      System.out.println("The object " + objectName + " wasn't found in " + bucketName);
      return;
    }

    // Optional: set a generation-match precondition to avoid potential race
    // conditions and data corruptions. The request to upload returns a 412 error if
    // the object's generation number does not match your precondition.
    Storage.BlobSourceOption precondition =
        Storage.BlobSourceOption.generationMatch(blob.getGeneration());

    Storage.CopyRequest request =
        Storage.CopyRequest.newBuilder()
            .setSource(blobId)
            .setSourceOptions(Storage.BlobSourceOption.decryptionKey(decryptionKey), precondition)
            .setTarget(blobId, Storage.BlobTargetOption.kmsKeyName(kmsKeyName))
            .build();
    storage.copy(request);

    System.out.println(
        "Object "
            + objectName
            + " in bucket "
            + bucketName
            + " is now managed by the KMS key "
            + kmsKeyName
            + " instead of a customer-supplied encryption key");
  }
}

Node.js

For more information, see the Cloud Storage Node.js API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

/**
 * TODO(developer): Uncomment the following lines before running the sample.
 */
// The ID of your GCS bucket
// const bucketName = 'your-unique-bucket-name';

// The ID of your GCS file
// const fileName = 'your-file-name';

// The Base64 encoded decryption key, which should be the same key originally
// used to encrypt the file
// const encryptionKey = 'TIbv/fjexq+VmtXzAlc63J4z5kFmWJ6NdAPQulQBT7g=';

// The name of the KMS key to manage this file with
// const kmsKeyName = 'projects/your-project-id/locations/global/keyRings/your-key-ring/cryptoKeys/your-key';

// Imports the Google Cloud client library
const {Storage} = require('@google-cloud/storage');

// Creates a client
const storage = new Storage();

async function changeFileCSEKToCMEK() {
  const rotateEncryptionKeyOptions = {
    kmsKeyName,
    // Optional: set a generation-match precondition to avoid potential race
    // conditions and data corruptions. The request to copy is aborted if the
    // object's generation number does not match your precondition.
    preconditionOpts: {
      ifGenerationMatch: generationMatchPrecondition,
    },
  };

  console.log(rotateEncryptionKeyOptions);

  await storage
    .bucket(bucketName)
    .file(fileName, {
      encryptionKey: Buffer.from(encryptionKey, 'base64'),
    })
    .rotateEncryptionKey({
      rotateEncryptionKeyOptions,
    });

  console.log(
    `file ${fileName} in bucket ${bucketName} is now managed by KMS key ${kmsKeyName} instead of customer-supplied encryption key`
  );
}

changeFileCSEKToCMEK().catch(console.error);

PHP

For more information, see the Cloud Storage PHP API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

use Google\Cloud\Storage\StorageClient;

/**
 * Migrate an object from a Customer-Specified Encryption Key to a Customer-Managed
 * Encryption Key.
 *
 * @param string $bucketName The name of your Cloud Storage bucket.
 *        (e.g. 'my-bucket')
 * @param string $objectName The name of your Cloud Storage object.
 *        (e.g. 'my-object')
 * @param string $decryptionKey The Base64 encoded decryption key, which should
 *        (e.g. 'TIbv/fjexq+VmtXzAlc63J4z5kFmWJ6NdAPQulQBT7g=')
 *     be the same key originally used to encrypt the object.
 * @param string $kmsKeyName The name of the KMS key to manage this object.
 *     Key names are provided in the following format:
 *     `projects/<PROJECT>/locations/<LOCATION>/keyRings/<RING_NAME>/cryptoKeys/<KEY_NAME>`.
 */
function object_csek_to_cmek(string $bucketName, string $objectName, string $decryptionKey, string $kmsKeyName): void
{
    $storage = new StorageClient();
    $bucket = $storage->bucket($bucketName);

    $object = $bucket->object($objectName, [
        'encryptionKey' => $decryptionKey,
    ]);

    $object->rewrite($bucketName, [
        'destinationKmsKeyName' => $kmsKeyName,
    ]);

    printf(
        'Object %s in bucket %s is now managed by the KMS key %s instead of a customer-supplied encryption key',
        $objectName,
        $bucketName,
        $kmsKeyName
    );
}

Python

For more information, see the Cloud Storage Python API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

from google.cloud import storage


def object_csek_to_cmek(bucket_name, blob_name, encryption_key, kms_key_name):
    """Change a blob's customer-supplied encryption key to KMS key"""
    # bucket_name = "your-bucket-name"
    # blob_name = "your-object-name"
    # encryption_key = "TIbv/fjexq+VmtXzAlc63J4z5kFmWJ6NdAPQulQBT7g="
    # kms_key_name = "projects/PROJ/locations/LOC/keyRings/RING/cryptoKey/KEY"

    storage_client = storage.Client()
    bucket = storage_client.bucket(bucket_name)

    current_encryption_key = base64.b64decode(encryption_key)
    source_blob = bucket.blob(blob_name, encryption_key=current_encryption_key)
    destination_blob = bucket.blob(blob_name, kms_key_name=kms_key_name)
    generation_match_precondition = None
    token = None

    # Optional: set a generation-match precondition to avoid potential race conditions
    # and data corruptions. The request to rewrite is aborted if the object's
    # generation number does not match your precondition.
    source_blob.reload()  # Fetch blob metadata to use in generation_match_precondition.
    generation_match_precondition = source_blob.generation

    while True:
        token, bytes_rewritten, total_bytes = destination_blob.rewrite(
            source_blob, token=token, if_generation_match=generation_match_precondition
        )
        if token is None:
            break

    print(
        "Blob {} in bucket {} is now managed by the KMS key {} instead of a customer-supplied encryption key".format(
            blob_name, bucket_name, kms_key_name
        )
    )
    return destination_blob

Ruby

For more information, see the Cloud Storage Ruby API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

def object_csek_to_cmek bucket_name:, file_name:, encryption_key:, kms_key_name:
  # The ID of your GCS bucket
  # bucket_name = "your-unique-bucket-name"

  # The ID of your GCS object
  # file_name = "your-file-name"

  # The Base64 encoded encryption key, which should be the same key originally used to encrypt the object
  # encryption_key = "TIbv/fjexq+VmtXzAlc63J4z5kFmWJ6NdAPQulQBT7g="

  # The name of the KMS key to manage this object with
  # kms_key_name = "projects/your-project-id/locations/global/keyRings/your-key-ring/cryptoKeys/your-key"

  require "google/cloud/storage"

  storage = Google::Cloud::Storage.new
  bucket = storage.bucket bucket_name, skip_lookup: true

  file = bucket.file file_name, encryption_key: encryption_key

  file.rotate encryption_key: encryption_key, new_kms_key: kms_key_name

  puts "File #{file_name} in bucket #{bucket_name} is now managed by the KMS key #{kms_key_name} instead of a " \
       "customer-supplied encryption key"
end

REST APIs

JSON API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Use cURL to call the JSON API with a POST Object request:

    curl -X POST \
      -H "Authorization: Bearer $(gcloud auth print-access-token)" \
      -H "Content-Length: 0" \
      -H "x-goog-copy-source-encryption-algorithm: AES256" \
      -H "x-goog-copy-source-encryption-key: OLD_ENCRYPTION_KEY" \
      -H "x-goog-copy-source-encryption-key-sha256: HASH_OF_OLD_KEY" \
      "https://storage.googleapis.com/storage/v1/b/BUCKET_NAME/o/OBJECT_NAME/rewriteTo/b/BUCKET_NAME/o/OBJECT_NAME?kmsKeyName=KEY_RESOURCE"

    Where:

    • OLD_ENCRYPTION_KEY is the current AES-256 key used to encrypt your object.
    • HASH_OF_OLD_KEY is the current SHA-256 hash for your AES-256 key.
    • BUCKET_NAME is the name of the bucket containing the relevant object. For example, my-bucket.
    • OBJECT_NAME is the URL-encoded name of the object whose keys you are rotating. For example, pets/dog.png, URL-encoded as pets%2Fdog.png.
    • KEY_RESOURCE is the Cloud KMS key resource.

XML API

The XML API does not support rotating from a customer-supplied encryption key to a Cloud KMS key through rewriting object. To perform such a rotation using the XML API, you should:

  1. Download the existing object.
  2. Re-upload the object using a Cloud KMS key.

.

Identify the key used to encrypt an object

To find the Cloud KMS key that was used to encrypt an object:

Console

  1. In the Google Cloud console, go to the Cloud Storage Buckets page.

    Go to Buckets

  2. In the list of buckets, click the name of the bucket that contains the desired object.

    The Bucket details page opens, with the Objects tab selected.

  3. Navigate to the object, which may be located in a folder.

  4. In the Encryption column, hover your mouse over the entry for the desired object.

    The key name and version appear in the format:

    LOCATION/KEY_RING_NAME/KEY_NAME/KEY_VERSION

Command line

Use the gcloud storage objects describe command with the --format flag:

gcloud storage objects describe gs://BUCKET_NAME/OBJECT_NAME --format="default(kms_key)"

Where:

  • BUCKET_NAME is the name of the bucket containing the encrypted object. For example, my-bucket.
  • OBJECT_NAME is the name of the encrypted object. For example, pets/dog.png.

If successful, the response looks like:

kms_key: projects/my-pet-project/locations/LOCATION_NAME/keyRings/KEYRING_NAME/cryptoKeys/KEY_NAME/cryptoKeyVersions/VERSION_NUMBER

Client libraries

C++

For more information, see the Cloud Storage C++ API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

namespace gcs = ::google::cloud::storage;
using ::google::cloud::StatusOr;
[](gcs::Client client, std::string const& bucket_name,
   std::string const& object_name) {
  StatusOr<gcs::ObjectMetadata> metadata =
      client.GetObjectMetadata(bucket_name, object_name);
  if (!metadata) throw std::move(metadata).status();

  std::cout << "KMS key on object " << metadata->name() << " in bucket "
            << metadata->bucket() << ": " << metadata->kms_key_name() << "\n";
}

C#

For more information, see the Cloud Storage C# API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the KMS key associated with an object, follow the instructions for displaying an object's metadata and look for the KMS key name field in the response.

using Google.Cloud.Storage.V1;
using System;

public class GetMetadataSample
{
    public Google.Apis.Storage.v1.Data.Object GetMetadata(
        string bucketName = "your-unique-bucket-name",
        string objectName = "your-object-name")
    {
        var storage = StorageClient.Create();
        var storageObject = storage.GetObject(bucketName, objectName, new GetObjectOptions { Projection = Projection.Full });
        Console.WriteLine($"Bucket:\t{storageObject.Bucket}");
        Console.WriteLine($"CacheControl:\t{storageObject.CacheControl}");
        Console.WriteLine($"ComponentCount:\t{storageObject.ComponentCount}");
        Console.WriteLine($"ContentDisposition:\t{storageObject.ContentDisposition}");
        Console.WriteLine($"ContentEncoding:\t{storageObject.ContentEncoding}");
        Console.WriteLine($"ContentLanguage:\t{storageObject.ContentLanguage}");
        Console.WriteLine($"ContentType:\t{storageObject.ContentType}");
        Console.WriteLine($"Crc32c:\t{storageObject.Crc32c}");
        Console.WriteLine($"ETag:\t{storageObject.ETag}");
        Console.WriteLine($"Generation:\t{storageObject.Generation}");
        Console.WriteLine($"Id:\t{storageObject.Id}");
        Console.WriteLine($"Kind:\t{storageObject.Kind}");
        Console.WriteLine($"KmsKeyName:\t{storageObject.KmsKeyName}");
        Console.WriteLine($"Md5Hash:\t{storageObject.Md5Hash}");
        Console.WriteLine($"MediaLink:\t{storageObject.MediaLink}");
        Console.WriteLine($"Metageneration:\t{storageObject.Metageneration}");
        Console.WriteLine($"Name:\t{storageObject.Name}");
        Console.WriteLine($"Retention:\t{storageObject.Retention}");
        Console.WriteLine($"Size:\t{storageObject.Size}");
        Console.WriteLine($"StorageClass:\t{storageObject.StorageClass}");
        Console.WriteLine($"TimeCreated:\t{storageObject.TimeCreated}");
        Console.WriteLine($"Updated:\t{storageObject.Updated}");
        bool eventBasedHold = storageObject.EventBasedHold ?? false;
        Console.WriteLine("Event-based hold enabled? {0}", eventBasedHold);
        bool temporaryHold = storageObject.TemporaryHold ?? false;
        Console.WriteLine("Temporary hold enabled? {0}", temporaryHold);
        Console.WriteLine($"RetentionExpirationTime\t{storageObject.RetentionExpirationTime}");
        if (storageObject.Metadata != null)
        {
            Console.WriteLine("Metadata: ");
            foreach (var metadata in storageObject.Metadata)
            {
                Console.WriteLine($"{metadata.Key}:\t{metadata.Value}");
            }
        }
        Console.WriteLine($"CustomTime:\t{storageObject.CustomTime}");
        return storageObject;
    }
}

Go

For more information, see the Cloud Storage Go API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the KMS key associated with an object, follow the instructions for displaying an object's metadata and look for the KMS key name field in the response.
import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/storage"
)

// getMetadata prints all of the object attributes.
func getMetadata(w io.Writer, bucket, object string) (*storage.ObjectAttrs, error) {
	// bucket := "bucket-name"
	// object := "object-name"
	ctx := context.Background()
	client, err := storage.NewClient(ctx)
	if err != nil {
		return nil, fmt.Errorf("storage.NewClient: %w", err)
	}
	defer client.Close()

	ctx, cancel := context.WithTimeout(ctx, time.Second*10)
	defer cancel()

	o := client.Bucket(bucket).Object(object)
	attrs, err := o.Attrs(ctx)
	if err != nil {
		return nil, fmt.Errorf("Object(%q).Attrs: %w", object, err)
	}
	fmt.Fprintf(w, "Bucket: %v\n", attrs.Bucket)
	fmt.Fprintf(w, "CacheControl: %v\n", attrs.CacheControl)
	fmt.Fprintf(w, "ContentDisposition: %v\n", attrs.ContentDisposition)
	fmt.Fprintf(w, "ContentEncoding: %v\n", attrs.ContentEncoding)
	fmt.Fprintf(w, "ContentLanguage: %v\n", attrs.ContentLanguage)
	fmt.Fprintf(w, "ContentType: %v\n", attrs.ContentType)
	fmt.Fprintf(w, "Crc32c: %v\n", attrs.CRC32C)
	fmt.Fprintf(w, "Generation: %v\n", attrs.Generation)
	fmt.Fprintf(w, "KmsKeyName: %v\n", attrs.KMSKeyName)
	fmt.Fprintf(w, "Md5Hash: %v\n", attrs.MD5)
	fmt.Fprintf(w, "MediaLink: %v\n", attrs.MediaLink)
	fmt.Fprintf(w, "Metageneration: %v\n", attrs.Metageneration)
	fmt.Fprintf(w, "Name: %v\n", attrs.Name)
	fmt.Fprintf(w, "Size: %v\n", attrs.Size)
	fmt.Fprintf(w, "StorageClass: %v\n", attrs.StorageClass)
	fmt.Fprintf(w, "TimeCreated: %v\n", attrs.Created)
	fmt.Fprintf(w, "Updated: %v\n", attrs.Updated)
	fmt.Fprintf(w, "Event-based hold enabled? %t\n", attrs.EventBasedHold)
	fmt.Fprintf(w, "Temporary hold enabled? %t\n", attrs.TemporaryHold)
	fmt.Fprintf(w, "Retention expiration time %v\n", attrs.RetentionExpirationTime)
	fmt.Fprintf(w, "Custom time %v\n", attrs.CustomTime)
	fmt.Fprintf(w, "Retention: %+v\n", attrs.Retention)
	fmt.Fprintf(w, "\n\nMetadata\n")
	for key, value := range attrs.Metadata {
		fmt.Fprintf(w, "\t%v = %v\n", key, value)
	}
	return attrs, nil
}

Java

For more information, see the Cloud Storage Java API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the KMS key associated with an object, follow the instructions for displaying an object's metadata and look for the KMS key name field in the response.

import com.google.cloud.storage.Blob;
import com.google.cloud.storage.Storage;
import com.google.cloud.storage.StorageException;
import com.google.cloud.storage.StorageOptions;
import java.util.Date;
import java.util.Map;

public class GetObjectMetadata {
  public static void getObjectMetadata(String projectId, String bucketName, String blobName)
      throws StorageException {
    // The ID of your GCP project
    // String projectId = "your-project-id";

    // The ID of your GCS bucket
    // String bucketName = "your-unique-bucket-name";

    // The ID of your GCS object
    // String objectName = "your-object-name";

    Storage storage = StorageOptions.newBuilder().setProjectId(projectId).build().getService();

    // Select all fields
    // Fields can be selected individually e.g. Storage.BlobField.CACHE_CONTROL
    Blob blob =
        storage.get(bucketName, blobName, Storage.BlobGetOption.fields(Storage.BlobField.values()));

    // Print blob metadata
    System.out.println("Bucket: " + blob.getBucket());
    System.out.println("CacheControl: " + blob.getCacheControl());
    System.out.println("ComponentCount: " + blob.getComponentCount());
    System.out.println("ContentDisposition: " + blob.getContentDisposition());
    System.out.println("ContentEncoding: " + blob.getContentEncoding());
    System.out.println("ContentLanguage: " + blob.getContentLanguage());
    System.out.println("ContentType: " + blob.getContentType());
    System.out.println("CustomTime: " + blob.getCustomTime());
    System.out.println("Crc32c: " + blob.getCrc32c());
    System.out.println("Crc32cHexString: " + blob.getCrc32cToHexString());
    System.out.println("ETag: " + blob.getEtag());
    System.out.println("Generation: " + blob.getGeneration());
    System.out.println("Id: " + blob.getBlobId());
    System.out.println("KmsKeyName: " + blob.getKmsKeyName());
    System.out.println("Md5Hash: " + blob.getMd5());
    System.out.println("Md5HexString: " + blob.getMd5ToHexString());
    System.out.println("MediaLink: " + blob.getMediaLink());
    System.out.println("Metageneration: " + blob.getMetageneration());
    System.out.println("Name: " + blob.getName());
    System.out.println("Size: " + blob.getSize());
    System.out.println("StorageClass: " + blob.getStorageClass());
    System.out.println("TimeCreated: " + new Date(blob.getCreateTime()));
    System.out.println("Last Metadata Update: " + new Date(blob.getUpdateTime()));
    System.out.println("Object Retention Policy: " + blob.getRetention());
    Boolean temporaryHoldIsEnabled = (blob.getTemporaryHold() != null && blob.getTemporaryHold());
    System.out.println("temporaryHold: " + (temporaryHoldIsEnabled ? "enabled" : "disabled"));
    Boolean eventBasedHoldIsEnabled =
        (blob.getEventBasedHold() != null && blob.getEventBasedHold());
    System.out.println("eventBasedHold: " + (eventBasedHoldIsEnabled ? "enabled" : "disabled"));
    if (blob.getRetentionExpirationTime() != null) {
      System.out.println("retentionExpirationTime: " + new Date(blob.getRetentionExpirationTime()));
    }
    if (blob.getMetadata() != null) {
      System.out.println("\n\n\nUser metadata:");
      for (Map.Entry<String, String> userMetadata : blob.getMetadata().entrySet()) {
        System.out.println(userMetadata.getKey() + "=" + userMetadata.getValue());
      }
    }
  }
}

Node.js

For more information, see the Cloud Storage Node.js API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the KMS key associated with an object, follow the instructions for displaying an object's metadata and look for the KMS key name field in the response.
/**
 * TODO(developer): Uncomment the following lines before running the sample.
 */
// The ID of your GCS bucket
// const bucketName = 'your-unique-bucket-name';

// The ID of your GCS file
// const fileName = 'your-file-name';

// Imports the Google Cloud client library
const {Storage} = require('@google-cloud/storage');

// Creates a client
const storage = new Storage();

async function getMetadata() {
  // Gets the metadata for the file
  const [metadata] = await storage
    .bucket(bucketName)
    .file(fileName)
    .getMetadata();

  console.log(`Bucket: ${metadata.bucket}`);
  console.log(`CacheControl: ${metadata.cacheControl}`);
  console.log(`ComponentCount: ${metadata.componentCount}`);
  console.log(`ContentDisposition: ${metadata.contentDisposition}`);
  console.log(`ContentEncoding: ${metadata.contentEncoding}`);
  console.log(`ContentLanguage: ${metadata.contentLanguage}`);
  console.log(`ContentType: ${metadata.contentType}`);
  console.log(`CustomTime: ${metadata.customTime}`);
  console.log(`Crc32c: ${metadata.crc32c}`);
  console.log(`ETag: ${metadata.etag}`);
  console.log(`Generation: ${metadata.generation}`);
  console.log(`Id: ${metadata.id}`);
  console.log(`KmsKeyName: ${metadata.kmsKeyName}`);
  console.log(`Md5Hash: ${metadata.md5Hash}`);
  console.log(`MediaLink: ${metadata.mediaLink}`);
  console.log(`Metageneration: ${metadata.metageneration}`);
  console.log(`Name: ${metadata.name}`);
  console.log(`Size: ${metadata.size}`);
  console.log(`StorageClass: ${metadata.storageClass}`);
  console.log(`TimeCreated: ${new Date(metadata.timeCreated)}`);
  console.log(`Last Metadata Update: ${new Date(metadata.updated)}`);
  console.log(`TurboReplication: ${metadata.rpo}`);
  console.log(
    `temporaryHold: ${metadata.temporaryHold ? 'enabled' : 'disabled'}`
  );
  console.log(
    `eventBasedHold: ${metadata.eventBasedHold ? 'enabled' : 'disabled'}`
  );
  if (metadata.retentionExpirationTime) {
    console.log(
      `retentionExpirationTime: ${new Date(metadata.retentionExpirationTime)}`
    );
  }
  if (metadata.metadata) {
    console.log('\n\n\nUser metadata:');
    for (const key in metadata.metadata) {
      console.log(`${key}=${metadata.metadata[key]}`);
    }
  }
}

getMetadata().catch(console.error);

PHP

For more information, see the Cloud Storage PHP API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the KMS key associated with an object, follow the instructions for displaying an object's metadata and look for the KMS key name field in the response.
use Google\Cloud\Storage\StorageClient;

/**
 * List object metadata.
 *
 * @param string $bucketName The name of your Cloud Storage bucket.
 *        (e.g. 'my-bucket')
 * @param string $objectName The name of your Cloud Storage object.
 *        (e.g. 'my-object')
 */
function object_metadata(string $bucketName, string $objectName): void
{
    $storage = new StorageClient();
    $bucket = $storage->bucket($bucketName);
    $object = $bucket->object($objectName);
    $info = $object->info();
    if (isset($info['name'])) {
        printf('Blob: %s' . PHP_EOL, $info['name']);
    }
    if (isset($info['bucket'])) {
        printf('Bucket: %s' . PHP_EOL, $info['bucket']);
    }
    if (isset($info['storageClass'])) {
        printf('Storage class: %s' . PHP_EOL, $info['storageClass']);
    }
    if (isset($info['id'])) {
        printf('ID: %s' . PHP_EOL, $info['id']);
    }
    if (isset($info['size'])) {
        printf('Size: %s' . PHP_EOL, $info['size']);
    }
    if (isset($info['updated'])) {
        printf('Updated: %s' . PHP_EOL, $info['updated']);
    }
    if (isset($info['generation'])) {
        printf('Generation: %s' . PHP_EOL, $info['generation']);
    }
    if (isset($info['metageneration'])) {
        printf('Metageneration: %s' . PHP_EOL, $info['metageneration']);
    }
    if (isset($info['etag'])) {
        printf('Etag: %s' . PHP_EOL, $info['etag']);
    }
    if (isset($info['crc32c'])) {
        printf('Crc32c: %s' . PHP_EOL, $info['crc32c']);
    }
    if (isset($info['md5Hash'])) {
        printf('MD5 Hash: %s' . PHP_EOL, $info['md5Hash']);
    }
    if (isset($info['contentType'])) {
        printf('Content-type: %s' . PHP_EOL, $info['contentType']);
    }
    if (isset($info['temporaryHold'])) {
        printf('Temporary hold: %s' . PHP_EOL, ($info['temporaryHold'] ? 'enabled' : 'disabled'));
    }
    if (isset($info['eventBasedHold'])) {
        printf('Event-based hold: %s' . PHP_EOL, ($info['eventBasedHold'] ? 'enabled' : 'disabled'));
    }
    if (isset($info['retentionExpirationTime'])) {
        printf('Retention Expiration Time: %s' . PHP_EOL, $info['retentionExpirationTime']);
    }
    if (isset($info['retention'])) {
        printf('Retention mode: %s' . PHP_EOL, $info['retention']['mode']);
        printf('Retain until time is: %s' . PHP_EOL, $info['retention']['retainUntilTime']);
    }
    if (isset($info['customTime'])) {
        printf('Custom Time: %s' . PHP_EOL, $info['customTime']);
    }
    if (isset($info['metadata'])) {
        printf('Metadata: %s' . PHP_EOL, print_r($info['metadata'], true));
    }
}

Python

For more information, see the Cloud Storage Python API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

from google.cloud import storage


def object_get_kms_key(bucket_name, blob_name):
    """Retrieve the KMS key of a blob"""
    # bucket_name = "your-bucket-name"
    # blob_name = "your-object-name"

    storage_client = storage.Client()

    bucket = storage_client.bucket(bucket_name)
    blob = bucket.get_blob(blob_name)

    kms_key = blob.kms_key_name

    print(f"The KMS key of a blob is {blob.kms_key_name}")
    return kms_key

Ruby

For more information, see the Cloud Storage Ruby API reference documentation.

To authenticate to Cloud Storage, set up Application Default Credentials. For more information, see Set up authentication for a local development environment.

To view the KMS key associated with an object, follow the instructions for displaying an object's metadata and look for the KMS key name field in the response.
def get_metadata bucket_name:, file_name:
  # The ID of your GCS bucket
  # bucket_name = "your-unique-bucket-name"

  # The ID of your GCS object
  # file_name = "your-file-name"

  require "google/cloud/storage"

  storage = Google::Cloud::Storage.new
  bucket  = storage.bucket bucket_name
  file    = bucket.file file_name

  puts "Name: #{file.name}"
  puts "Bucket: #{bucket.name}"
  puts "Storage class: #{bucket.storage_class}"
  puts "ID: #{file.id}"
  puts "Size: #{file.size} bytes"
  puts "Created: #{file.created_at}"
  puts "Updated: #{file.updated_at}"
  puts "Generation: #{file.generation}"
  puts "Metageneration: #{file.metageneration}"
  puts "Etag: #{file.etag}"
  puts "Owners: #{file.acl.owners.join ','}"
  puts "Crc32c: #{file.crc32c}"
  puts "md5_hash: #{file.md5}"
  puts "Cache-control: #{file.cache_control}"
  puts "Content-type: #{file.content_type}"
  puts "Content-disposition: #{file.content_disposition}"
  puts "Content-encoding: #{file.content_encoding}"
  puts "Content-language: #{file.content_language}"
  puts "KmsKeyName: #{file.kms_key}"
  puts "Event-based hold enabled?: #{file.event_based_hold?}"
  puts "Temporary hold enaled?: #{file.temporary_hold?}"
  puts "Retention Expiration: #{file.retention_expires_at}"
  puts "Custom Time: #{file.custom_time}"
  puts "Metadata:"
  file.metadata.each do |key, value|
    puts " - #{key} = #{value}"
  end
end

REST APIs

JSON API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Use cURL to call the JSON API with a GET Object request:

    curl -X GET \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    "https://storage.googleapis.com/storage/v1/b/BUCKET_NAME/o/OBJECT_NAME?fields=kmsKeyName"

    Where:

    • BUCKET_NAME is the name of the bucket containing the encrypted object. For example, my-bucket.
    • OBJECT_NAME is the URL-encoded name of the encrypted object. For example, pets/dog.png, URL-encoded as pets%2Fdog.png.

XML API

  1. Have gcloud CLI installed and initialized, which lets you generate an access token for the Authorization header.

  2. Use cURL to call the XML API with a GET Object request:

    curl -X GET \
    -H "Authorization: Bearer $(gcloud auth print-access-token)" \
    "https://storage.googleapis.com/BUCKET_NAME/OBJECT_NAME?encryption"

    Where:

    • BUCKET_NAME is the name of the bucket containing the encrypted object. For example, my-bucket.
    • OBJECT_NAME is the URL-encoded name of the encrypted object. For example, pets/dog.png, URL-encoded as pets%2Fdog.png.

Decrypt an object

Decrypting an object encrypted with a Cloud KMS key is performed automatically as long as the relevant service agent has access to the key. For more information, see Service agents with CMEKs.

What's next