カスタムタイムアウトと再試行を構成する

このページでは、デフォルトのタイムアウト構成をオーバーライドする方法と、Spanner クライアント ライブラリを使用して再試行ポリシーを構成する方法について説明します。

クライアント ライブラリでは、次の構成ファイルで定義されているデフォルトのタイムアウト ポリシー設定と再試行ポリシー設定が使用されます。

構成ファイルでは、CreateSession など、短時間で完了するオペレーションのデフォルトのタイムアウトは 30 秒です。クエリや読み取りなどの長時間のオペレーションのデフォルトのタイムアウトは 3,600 秒です。これらのデフォルトを使用することをおすすめします。ただし、カスタム タイムアウト ポリシーと再試行ポリシーは必要に応じて設定できます。

タイムアウトを変更する場合は、アプリケーションが結果を待機するように構成された時間の実際の時間を設定します。

再試行ポリシーを、デフォルトより再試行回数が増えるような構成にはしないでください。そのようにすると、バックエンドが過負荷状態になり、リクエストがスロットルされる可能性があります。

各スニペットでは、次の特性を持つ再試行ポリシーも定義されています。

  • リクエストを再試行する前の初期待ち時間、つまり再試行の開始時間。
  • 最大遅延時間。
  • 最大待ち時間に達するまで、前回の待ち時間との乗算を行い、次の待ち時間を計算します。
  • 再試行オペレーションのエラーコードのセット。

次のサンプルでは、特定のオペレーションに対しタイムアウトが 60 秒に設定されています。オペレーションがこのタイムアウトより長い場合、オペレーションは DEADLINE_EXCEEDED エラーで失敗します。

一時的なネットワークの問題が発生している場合など、オペレーションが UNAVAILABLE エラーコードで失敗した場合、オペレーションは再試行されます。クライアントは 500 ミリ秒待ってから最初の再試行を開始します。最初の再試行が失敗した場合、クライアントは 1.5 * 500 ms = 750 ms 待ってから 2 回目の再試行を開始します。この再試行の遅延は、オペレーションが成功するか、最大再試行遅延である 16 秒に達するまで増加します。オペレーションの試行に費やされた合計時間が合計タイムアウト値の 60 秒を超えると、オペレーションは DEADLINE_EXCEEDED エラーで失敗します。

C++

namespace spanner = ::google::cloud::spanner;
using ::google::cloud::StatusOr;
[](std::string const& project_id, std::string const& instance_id,
   std::string const& database_id) {
  // Use a truncated exponential backoff with jitter to wait between
  // retries:
  //   https://en.wikipedia.org/wiki/Exponential_backoff
  //   https://cloud.google.com/storage/docs/exponential-backoff
  auto client = spanner::Client(spanner::MakeConnection(
      spanner::Database(project_id, instance_id, database_id),
      google::cloud::Options{}
          .set<spanner::SpannerRetryPolicyOption>(
              std::make_shared<spanner::LimitedTimeRetryPolicy>(
                  /*maximum_duration=*/std::chrono::seconds(60)))
          .set<spanner::SpannerBackoffPolicyOption>(
              std::make_shared<spanner::ExponentialBackoffPolicy>(
                  /*initial_delay=*/std::chrono::milliseconds(500),
                  /*maximum_delay=*/std::chrono::seconds(16),
                  /*scaling=*/1.5))));

  std::int64_t rows_inserted;
  auto commit_result = client.Commit(
      [&client, &rows_inserted](
          spanner::Transaction txn) -> StatusOr<spanner::Mutations> {
        auto insert = client.ExecuteDml(
            std::move(txn),
            spanner::SqlStatement(
                "INSERT INTO Singers (SingerId, FirstName, LastName)"
                "  VALUES (20, 'George', 'Washington')"));
        if (!insert) return std::move(insert).status();
        rows_inserted = insert->RowsModified();
        return spanner::Mutations{};
      });
  if (!commit_result) throw std::move(commit_result).status();
  std::cout << "Rows inserted: " << rows_inserted;
}

C#


using Google.Api.Gax;
using Google.Api.Gax.Grpc;
using Google.Cloud.Spanner.Common.V1;
using Google.Cloud.Spanner.V1;
using Grpc.Core;
using System;
using System.Threading;
using System.Threading.Tasks;
using static Google.Cloud.Spanner.V1.TransactionOptions.Types;

public class CustomTimeoutsAndRetriesAsyncSample
{
    public async Task<long> CustomTimeoutsAndRetriesAsync(string projectId, string instanceId, string databaseId)
    {
        // Create a SessionPool.
        SpannerClient client = SpannerClient.Create();
        SessionPool sessionPool = new SessionPool(client, new SessionPoolOptions());

        // Acquire a session with a read-write transaction to run a query.
        DatabaseName databaseName =
            DatabaseName.FromProjectInstanceDatabase(projectId, instanceId, databaseId);
        TransactionOptions transactionOptions = new TransactionOptions
        {
            ReadWrite = new ReadWrite()
        };
        using PooledSession session = await sessionPool.AcquireSessionAsync(
            databaseName, transactionOptions, CancellationToken.None);

        ExecuteSqlRequest request = new ExecuteSqlRequest
        {
            Sql = "INSERT Singers (SingerId, FirstName, LastName) VALUES (20, 'George', 'Washington')"
        };

        // Prepare the call settings with custom timeout and retry settings.
        CallSettings settings = CallSettings
            .FromExpiration(Expiration.FromTimeout(TimeSpan.FromSeconds(60)))
            .WithRetry(RetrySettings.FromExponentialBackoff(
                maxAttempts: 12,
                initialBackoff: TimeSpan.FromMilliseconds(500),
                maxBackoff: TimeSpan.FromSeconds(16),
                backoffMultiplier: 1.5,
                retryFilter: RetrySettings.FilterForStatusCodes(
                    new StatusCode[] { StatusCode.Unavailable })));

        ResultSet result = await session.ExecuteSqlAsync(request, settings);
        await session.CommitAsync(new CommitRequest(), null);

        return result.Stats.RowCountExact;
    }
}

Go


import (
	"context"
	"fmt"
	"io"
	"time"

	"cloud.google.com/go/spanner"
	spapi "cloud.google.com/go/spanner/apiv1"
	gax "github.com/googleapis/gax-go/v2"
	"google.golang.org/grpc/codes"
)

func setCustomTimeoutAndRetry(w io.Writer, db string) error {
	// Set a custom retry setting.
	co := &spapi.CallOptions{
		ExecuteSql: []gax.CallOption{
			gax.WithRetry(func() gax.Retryer {
				return gax.OnCodes([]codes.Code{
					codes.Unavailable,
				}, gax.Backoff{
					Initial:    500 * time.Millisecond,
					Max:        16000 * time.Millisecond,
					Multiplier: 1.5,
				})
			}),
		},
	}
	client, err := spanner.NewClientWithConfig(context.Background(), db, spanner.ClientConfig{CallOptions: co})
	if err != nil {
		return err
	}
	defer client.Close()

	// Set timeout to 60s.
	ctx, cancel := context.WithTimeout(context.Background(), 60*time.Second)
	defer cancel()

	_, err = client.ReadWriteTransaction(ctx, func(ctx context.Context, txn *spanner.ReadWriteTransaction) error {
		stmt := spanner.Statement{
			SQL: `INSERT Singers (SingerId, FirstName, LastName)
					VALUES (20, 'George', 'Washington')`,
		}

		rowCount, err := txn.Update(ctx, stmt)
		if err != nil {
			return err
		}
		fmt.Fprintf(w, "%d record(s) inserted.\n", rowCount)
		return nil
	})
	return err
}

Java


import com.google.api.gax.retrying.RetrySettings;
import com.google.api.gax.rpc.StatusCode.Code;
import com.google.cloud.spanner.DatabaseClient;
import com.google.cloud.spanner.DatabaseId;
import com.google.cloud.spanner.Spanner;
import com.google.cloud.spanner.SpannerOptions;
import com.google.cloud.spanner.Statement;
import org.threeten.bp.Duration;

class CustomTimeoutAndRetrySettingsExample {

  static void executeSqlWithCustomTimeoutAndRetrySettings() {
    // TODO(developer): Replace these variables before running the sample.
    String projectId = "my-project";
    String instanceId = "my-instance";
    String databaseId = "my-database";

    executeSqlWithCustomTimeoutAndRetrySettings(projectId, instanceId, databaseId);
  }

  // Create a Spanner client with custom ExecuteSql timeout and retry settings.
  static void executeSqlWithCustomTimeoutAndRetrySettings(
      String projectId, String instanceId, String databaseId) {
    SpannerOptions.Builder builder = SpannerOptions.newBuilder().setProjectId(projectId);
    // Set custom timeout and retry settings for the ExecuteSql RPC.
    // This must be done in a separate chain as the setRetryableCodes and setRetrySettings methods
    // return a UnaryCallSettings.Builder instead of a SpannerOptions.Builder.
    builder
        .getSpannerStubSettingsBuilder()
        .executeSqlSettings()
        // Configure which errors should be retried.
        .setRetryableCodes(Code.UNAVAILABLE)
        .setRetrySettings(
            RetrySettings.newBuilder()
                // Configure retry delay settings.
                // The initial amount of time to wait before retrying the request.
                .setInitialRetryDelay(Duration.ofMillis(500))
                // The maximum amount of time to wait before retrying. I.e. after this value is
                // reached, the wait time will not increase further by the multiplier.
                .setMaxRetryDelay(Duration.ofSeconds(16))
                // The previous wait time is multiplied by this multiplier to come up with the next
                // wait time, until the max is reached.
                .setRetryDelayMultiplier(1.5)

                // Configure RPC and total timeout settings.
                // Timeout for the first RPC call. Subsequent retries will be based off this value.
                .setInitialRpcTimeout(Duration.ofSeconds(60))
                // The max for the per RPC timeout.
                .setMaxRpcTimeout(Duration.ofSeconds(60))
                // Controls the change of timeout for each retry.
                .setRpcTimeoutMultiplier(1.0)
                // The timeout for all calls (first call + all retries).
                .setTotalTimeout(Duration.ofSeconds(60))
                .build());
    // Create a Spanner client using the custom retry and timeout settings.
    try (Spanner spanner = builder.build().getService()) {
      DatabaseClient client =
          spanner.getDatabaseClient(DatabaseId.of(projectId, instanceId, databaseId));
      client
          .readWriteTransaction()
          .run(transaction -> {
            String sql =
                "INSERT INTO Singers (SingerId, FirstName, LastName)\n"
                    + "VALUES (20, 'George', 'Washington')";
            long rowCount = transaction.executeUpdate(Statement.of(sql));
            System.out.printf("%d record inserted.%n", rowCount);
            return null;
          });
    }
  }
}

Node.js

// Imports the Google Cloud client library
const {Spanner} = require('@google-cloud/spanner');

/**
 * TODO(developer): Uncomment the following lines before running the sample.
 */
// const projectId = 'my-project-id';
// const instanceId = 'my-instance';
// const databaseId = 'my-database';

// Creates a client
const spanner = new Spanner({
  projectId: projectId,
});
const UNAVAILABLE_STATUS_CODE = 14;
const retryAndTimeoutSettings = {
  retry: {
    // The set of error codes that will be retried.
    retryCodes: [UNAVAILABLE_STATUS_CODE],
    backoffSettings: {
      // Configure retry delay settings.
      // The initial amount of time to wait before retrying the request.
      initialRetryDelayMillis: 500,
      // The maximum amount of time to wait before retrying. I.e. after this
      // value is reached, the wait time will not increase further by the
      // multiplier.
      maxRetryDelayMillis: 16000,
      // The previous wait time is multiplied by this multiplier to come up
      // with the next wait time, until the max is reached.
      retryDelayMultiplier: 1.5,

      // Configure RPC and total timeout settings.
      // Timeout for the first RPC call. Subsequent retries will be based off
      // this value.
      initialRpcTimeoutMillis: 60000,
      // Controls the change of timeout for each retry.
      rpcTimeoutMultiplier: 1.0,
      // The max for the per RPC timeout.
      maxRpcTimeoutMillis: 60000,
      // The timeout for all calls (first call + all retries).
      totalTimeoutMillis: 60000,
    },
  },
};

// Gets a reference to a Cloud Spanner instance and database
const instance = spanner.instance(instanceId);
const database = instance.database(databaseId);
const table = database.table('Singers');

const row = {
  SingerId: 16,
  FirstName: 'Martha',
  LastName: 'Waller',
};

await table.insert(row, retryAndTimeoutSettings);

console.log('record inserted.');

Python

from google.api_core import exceptions as core_exceptions
from google.api_core import retry

# instance_id = "your-spanner-instance"
# database_id = "your-spanner-db-id"
spanner_client = spanner.Client()
instance = spanner_client.instance(instance_id)
database = instance.database(database_id)

retry = retry.Retry(
    # Customize retry with an initial wait time of 500 milliseconds.
    initial=0.5,
    # Customize retry with a maximum wait time of 16 seconds.
    maximum=16,
    # Customize retry with a wait time multiplier per iteration of 1.5.
    multiplier=1.5,
    # Customize retry with a timeout on
    # how long a certain RPC may be retried in
    # case the server returns an error.
    timeout=60,
    # Configure which errors should be retried.
    predicate=retry.if_exception_type(
        core_exceptions.ServiceUnavailable,
    ),
)

# Set a custom retry and timeout setting.
with database.snapshot() as snapshot:
    results = snapshot.execute_sql(
        "SELECT SingerId, AlbumId, AlbumTitle FROM Albums",
        # Set custom retry setting for this request
        retry=retry,
        # Set custom timeout of 60 seconds for this request
        timeout=60,
    )

    for row in results:
        print("SingerId: {}, AlbumId: {}, AlbumTitle: {}".format(*row))

Ruby

# project_id  = "Your Google Cloud project ID"
# instance_id = "Your Spanner instance ID"
# database_id = "Your Spanner database ID"

require "google/cloud/spanner"

spanner   = Google::Cloud::Spanner.new project: project_id
client    = spanner.client instance_id, database_id
row_count = 0

timeout = 60.0
retry_policy = {
  initial_delay: 0.5,
  max_delay:     16.0,
  multiplier:    1.5,
  retry_codes:   ["UNAVAILABLE"]
}
call_options = { timeout: timeout, retry_policy: retry_policy }

client.transaction do |transaction|
  row_count = transaction.execute_update(
    "INSERT INTO Singers (SingerId, FirstName, LastName) VALUES (10, 'Virginia', 'Watson')",
    call_options: call_options
  )
end

puts "#{row_count} record inserted."