VPC network overview

A Virtual Private Cloud (VPC) network is a virtual version of a physical network, implemented inside of Google's production network, using Andromeda. A VPC network provides the following:

Projects can contain multiple VPC networks. Unless you create an organizational policy that prohibits it, new projects start with a default network (an auto mode VPC network) that has one subnetwork (subnet) in each region.

Networks and subnets

The terms subnet and subnetwork are synonymous. They are used interchangeably in the Google Cloud console, gcloud commands, and API documentation.

A subnet is not the same thing as a (VPC) network. Networks and subnets are different types of resources in Google Cloud.

For more information about subnets, see Subnets overview.


VPC networks have the following properties:

  • VPC networks, including their associated routes and firewall rules, are global resources. They are not associated with any particular region or zone.

  • Subnets are regional resources.

  • Each subnet defines a range of IPv4 addresses. Subnets in custom mode VPC networks can also have a range of IPv6 addresses.

  • Traffic to and from instances can be controlled with network firewall rules. Rules are implemented on the VMs themselves, so traffic can only be controlled and logged as it leaves or arrives at a VM.

  • Resources within a VPC network can communicate with one another by using internal IPv4 addresses, internal IPv6 addresses, or external IPv6 addresses, subject to applicable network firewall rules. For more information, see communication within the network.

  • Instances with internal IPv4 or IPv6 addresses can communicate with Google APIs and services. For more information, see Private access options for services.

  • Network administration can be secured by using Identity and Access Management (IAM) roles.

  • An organization can use Shared VPC to keep a VPC network in a common host project. Authorized IAM principals from other projects in the same organization can create resources that use subnets of the Shared VPC network.

  • VPC networks can be connected to other VPC networks in different projects or organizations by using VPC Network Peering.

  • VPC networks can be securely connected in hybrid environments by using Cloud VPN or Cloud Interconnect.

  • VPC networks support GRE traffic, including traffic on Cloud VPN and Cloud Interconnect. VPC networks do not support GRE for Cloud NAT or for forwarding rules for load balancing and protocol forwarding. Support for GRE allows you to terminate GRE traffic on a VM from the internet (external IP address) and Cloud VPN or Cloud Interconnect (internal IP address). The decapsulated traffic can then be forwarded to a reachable destination. GRE enables you to use services such as Secure Access Service Edge (SASE) and SD-WAN.

  • VPC networks support IPv4 and IPv6 unicast addresses. VPC networks do not support broadcast or multicast addresses within the network.

    For more information about IPv6, see Subnets overview.

Organization policy constraints

  • Each new project starts with a default VPC network. You can disable the creation of default networks by creating an organization policy with the compute.skipDefaultNetworkCreation constraint. Projects that inherit this policy won't have a default network.

  • You can control the following IPv6 configurations using organization policies:

    • Disable VPC External IPv6 usage: If set to true, the constraints/compute.disableVpcExternalIpv6 constraint prevents you from configuring dual-stack subnets with external IPv6 ranges.

    • Disable VPC Internal IPv6 usage: If set to true, the constraints/compute.disableVpcInternalIpv6 constraint prevents you from configuring dual-stack subnets with internal IPv6 ranges.

    • Disable All IPv6 usage: If set to true, the constraints/compute.disableAllIpv6 constraint disables the creation of, or update to, any resources involved in IPv6 usage.

For more information about constraints, see Organization policy constraints.

Subnet creation mode

Google Cloud offers two types of VPC networks, determined by their subnet creation mode:

  • When an auto mode VPC network is created, one subnet from each region is automatically created within it. These automatically created subnets use a set of predefined IPv4 ranges that fit within the CIDR block. As new Google Cloud regions become available, new subnets in those regions are automatically added to auto mode VPC networks by using an IP range from that block. In addition to the automatically created subnets, you can add more subnets manually to auto mode VPC networks in regions that you choose by using IP ranges outside of

  • When a custom mode VPC network is created, no subnets are automatically created. This type of network provides you with complete control over its subnets and IP ranges. You decide which subnets to create in regions that you choose by using IP ranges that you specify.

You can switch a VPC network from auto mode to custom mode. This is a one-way conversion; custom mode VPC networks cannot be changed to auto mode VPC networks. To help you decide which type of network meets your needs, see the considerations for auto mode VPC networks.

Default network

Unless you choose to disable it, each new project starts with a default network. The default network is an auto mode VPC network with pre-populated IPv4 firewall rules. The default network does not have pre-populated IPv6 firewall rules.

Considerations for auto mode VPC networks

Auto mode VPC networks are easy to set up and use, and they are well suited for use cases with these attributes:

  • Having subnets automatically created in each region is useful.

  • The predefined IP ranges of the subnets do not overlap with IP ranges that you would use for different purposes (for example, Cloud VPN connections to on-premises resources).

However, custom mode VPC networks are more flexible and are better suited to production. The following attributes highlight use cases where custom mode VPC networks are recommended or required:

  • Having one subnet automatically created in each region isn't necessary.

  • Having new subnets automatically created as new regions become available could overlap with IP addresses used by manually created subnets or static routes, or could interfere with your overall network planning.

  • You need complete control over the subnets created in your VPC network, including regions and IP address ranges used.

  • You plan to connect VPC networks by using VPC Network Peering or Cloud VPN. Because the subnets of every auto mode VPC network use the same predefined range of IP addresses, you cannot connect auto mode VPC networks to one another.

  • You want to create subnets with IPv6 ranges. Auto mode VPC networks do not support dual-stack subnets.

IPv4 subnet ranges

Each subnet has a primary IPv4 address range. The primary internal addresses for the following resources come from the subnet's primary range: VM instances, internal load balancers, and internal protocol forwarding. You can optionally add secondary IP address ranges to a subnet, which are only used by alias IP ranges. However, you can configure alias IP ranges for instances from the primary or secondary range of a subnet.

Each primary or secondary IPv4 range for all subnets in a VPC network must be a unique valid CIDR block. Refer to the per network limits for the number of secondary IP ranges you can define.

Your IPv4 subnets don't need to form a predefined contiguous CIDR block, but you can do that if desired. For example, auto mode VPC networks do create subnets that fit within a predefined auto mode IP range.

When you create a subnet in a custom mode VPC network, you choose what IPv4 range to use. For more information, see valid ranges, prohibited subnet ranges, and working with subnets.

There are four unusable IP addresses in every primary IPv4 subnet range. For more information, see reserved IP addresses in a subnet.

Auto mode VPC networks are created with one subnet per region at creation time and automatically receive new subnets in new regions. The subnets have IPv4 ranges only, and all subnet ranges fit inside the CIDR block. Unused portions of are reserved for future Google Cloud use. For information about what IPv4 range is used in which region, see Auto mode IPv4 subnet ranges.

IPv6 subnet ranges

When you create a dual-stack subnet in a custom mode VPC network, you choose whether the subnet is configured with an internal IPv6 subnet range, or an external IPv6 subnet range.

  • Internal IPv6 subnet ranges use unique local addresses (ULAs).

    • ULAs are used for VM to VM communication within VPC networks. ULAs for IPv6 are analogous to RFC 1918 addresses for IPv4. ULAs cannot be reached from the internet, and are not publicly routable.
  • External IPv6 subnet ranges use global unicast addresses (GUAs).

    • GUAs can be used for VM to VM communication within VPC networks, and are also routable on the internet.

For more information about IPv6 subnet ranges, see Subnets overview.

Networks that support dual-stack subnets

You can create dual-stack subnets in a custom mode VPC network.

Dual-stack subnets are not supported on auto mode VPC networks, including the default network. Dual-stack subnets are not supported on legacy networks.

If you have an auto mode VPC network that you would like to add dual-stack subnets to, you can do the following:

  1. Convert the auto mode network to custom mode.

  2. Create new dual-stack subnets or convert existing subnets to dual-stack.

Routes and firewall rules


Routes define paths for packets leaving instances (egress traffic). For details about Google Cloud route types, see the routes overview.

Dynamic routing mode

Each VPC network has an associated dynamic routing mode that controls the behavior of all of its Cloud Routers. Cloud Routers manage BGP sessions for Google Cloud connectivity products.

For a description of dynamic routing mode options, see Effects of dynamic routing mode in the Cloud Router documentation.

Route advertisements and internal IP addresses

The following IP addresses are advertised within a VPC network:

If you connect VPC networks using VPC Network Peering, subnet ranges using private IPv4 addresses are always exchanged. You can control whether subnet ranges using privately used public IPv4 addresses are exchanged. Global internal IPv4 addresses are never exchanged using peering. For additional details, see the VPC Network Peering documentation.

When you connect a VPC network to another network, such as an on-premises network, using a Google Cloud connectivity product like Cloud VPN, Cloud Interconnect, or Router appliance:

  • You can advertise the VPC network's internal IP addresses to another network (such as an on-premises network).
  • Though connectivity between a VPC network and another network (such as an on-premises network) can use private routing provided by a Google Cloud connectivity product, the other network's IP addresses might also be publicly routable. Keep this in mind if an on-premises network uses publicly routable IP addresses.
  • VM instances in a VPC network containing subnet ranges with privately used public IP addresses are not able to connect to external resources which use those same public IP addresses.
  • Take extra care when advertising privately used public IP addresses to another network (such as an on-premises network), especially when the other network can advertise those public IP addresses to the internet.

Firewall rules

Both hierarchical firewall policies and VPC firewall rules apply to packets sent to and from VM instances (and resources that depend on VMs, such as Google Kubernetes Engine nodes). Both types of firewalls control traffic even if it is between VMs in the same VPC network.

To monitor which firewall rule allowed or denied a particular connection, see Firewall Rules Logging.

Communications and access

Communication within the network

The system-generated subnet routes define the paths for sending traffic among instances within the network by using internal IP addresses. For one instance to be able to communicate with another, appropriate firewall rules must also be configured because every network has an implied deny firewall rule for ingress traffic.

Except for the default network, you must explicitly create higher priority ingress firewall rules to allow instances to communicate with one another. The default network includes several firewall rules in addition to the implied ones, including the default-allow-internal rule, which permits instance-to-instance communication within the network. The default network also comes with ingress rules allowing protocols such as RDP and SSH.

Rules that come with the default network are also presented as options for you to apply to new auto mode VPC networks that you create by using the Cloud console.

Internet access requirements

The following criteria must be satisfied for an instance to have outgoing internet access:

  • The network must have a valid default internet gateway route or custom route whose destination IP range is the most general ( This route defines the path to the internet. For more information, see Routes.

  • Firewall rules must allow egress traffic from the instance. Unless overridden by a higher priority rule, the implied allow rule for egress traffic permits outbound traffic from all instances.

  • One of the following must be true:

    • The instance must have an external IP address. An external IP address can be assigned to an instance when it is created or after it has been created.

    • The instance must be able to use Cloud NAT or an instance-based proxy that is the target for a static route.

Communications and access for App Engine

VPC firewall rules apply to resources running in the VPC network, such as Compute Engine VMs. For App Engine instances, firewall rules work as follows:

  • App Engine standard environment: Only App Engine firewall rules apply to ingress traffic. Because App Engine standard environment instances do not run inside your VPC network, VPC firewall rules do not apply to them.

  • App Engine flexible environment: Both App Engine and VPC firewall rules apply to ingress traffic. Inbound traffic is only permitted if it is allowed by both types of firewall rules. For outbound traffic, VPC firewall rules apply.

For more information about how to control access to App Engine instances, see App security.

Traceroute to external IP addresses

For internal reasons, Google Cloud increases the TTL counter of packets that traverse next hops in Google's network. Tools like traceroute and mtr might provide incomplete results because the TTL doesn't expire on some of the hops. Hops that are inside of Google's network might be hidden when you send packets from Compute Engine instances to destinations on the internet.

The number of hidden hops varies based on the instance's Network Service Tiers, region, and other factors. If there are only a few hops, it's possible for all of them to be hidden. Missing hops from a traceroute or mtr result don't mean that outbound traffic is dropped.

There is no workaround for this behavior. You must take it into account if you configure third-party monitoring that connects to an external IP address associated with a VM.

Egress throughput limits

Network throughput information is available on the Network bandwidth page in the Compute Engine documentation.

Packet size

Information about packet size is in the maximum transmission unit overview.

VPC network example

The following example illustrates a custom mode VPC network with three subnets in two regions:

VPC network example (click to enlarge)
VPC network example (click to enlarge)
  • Subnet1 is defined as in the us-west1 region.
    • Two VM instances in the us-west1-a zone are in this subnet. Their IP addresses both come from the available range of addresses in subnet1.
  • Subnet2 is defined as in the us-east1 region.
    • Two VM instances in the us-east1-a zone are in this subnet. Their IP addresses both come from the available range of addresses in subnet2.
  • Subnet3 is defined as, also in the us-east1 region.
    • One VM instance in the us-east1-a zone and a second instance in the us-east1-b zone are in subnet3, each receiving an IP address from its available range. Because subnets are regional resources, instances can have their network interfaces associated with any subnet in the same region that contains their zones.

Maximum transmission unit

For more information about the maximum transmission unit (MTU) setting for a VPC network and its connected VMs, see the maximum transmission unit overview.

For information about changing the MTU of a VPC network, or migrating VMs between VPC networks with different MTU settings, see Change the MTU setting of a VPC network.

Network performance


The measured inter-region latency for Google Cloud networks can be found in our live dashboard. The dashboard shows Google Cloud's median inter-region latency and throughput performance metrics and methodology to reproduce these results using PerfKit Benchmarker.

Google Cloud typically measures round-trip latencies less than 55 μs at the 50th percentile and tail latencies less than 80μs at the 99th percentile between c2-standard-4 VM instances in the same zone.

Google Cloud typically measures round-trip latencies less than 45μs at the 50th percentile and tail latencies less than 60μs at the 99th percentile between c2-standard-4 VM instances in the same low-latency network ("compact" placement policy). Compact placement policy lowers the network latency by ensuring that the VMs are located physically within the same low-latency network.

Methodology: Intra-zone latency is monitored via a blackbox prober that constantly runs netperf TCP_RR benchmark between a pair of c2-types VMs in every zone c2 instances are available. It collects P50 and P99 results for setup with and without compact placement policy. TCP_RR benchmark measures request/response performance by measuring the transaction rate. If your applications require best possible latency, c2 instances are recommended.

Packet loss

Google Cloud tracks cross-region packet loss by regularly measuring round-trip loss between all regions. We target the global average of those measurements to be lower than 0.01% .

Methodology: A blackbox vm-to-vm prober monitors the packet loss for every zone pair using pings and aggregates the results into one global loss metric. This metric is tracked with a one-day window.

What's next

Try it for yourself

If you're new to Google Cloud, create an account to evaluate how VPC performs in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.

Try VPC free