Nella console Google Cloud , fai clic su
menuMenu.
Seleziona Operazioni>Backup e DR.
Fai clic su Attiva.
Si apre la procedura guidata Configura Backup e DR.
Nella sezione Attiva la console di gestione, completa
quanto segue:
Seleziona la posizione in cui vuoi che si trovi la
console di gestione. Questa è la Google Cloud
regione, vedi
Regioni supportate.
Fai clic su Continua.
Nella sezione Esegui il deployment della tua prima appliance di backup/ripristino, completa
quanto segue:
In Nome appliance, inserisci un nome per l'appliance. Il nome deve
iniziare con una lettera minuscola e può contenere fino a 23 caratteri. Il nome
dell'appliance può contenere solo lettere minuscole, caratteri numerici
e trattini (-). Gli spazi non sono consentiti.
Seleziona una rete VPC. Puoi selezionare la rete all'interno dello stesso progetto o dal progetto VPC condiviso.
Seleziona il progetto di destinazione in cui vuoi eseguire il deployment dell'appliance di backup/recupero.
Seleziona la regione e la zona in cui vuoi che si trovino gli appliance di backup/recupero. Questa è la Google Cloud regione e la zona, vedi
Regioni supportate.
Seleziona Subnet. Queste informazioni vengono visualizzate in base alla regione e alla zona selezionate.
Seleziona un Tipo di archiviazione per archiviare i backup. Questa opzione viene visualizzata solo se selezioni Di base per database, VM VMware e altre risorse per Tipo di appliance di backup/ripristino.
Fai clic su Configura.
Viene visualizzata la pagina di stato. Il completamento dell'operazione può richiedere circa un'ora.
Al termine del deployment, fai clic su Accedi alla console di gestione
e la console di gestione si aprirà in una nuova finestra.
Se vuoi eseguire il deployment di una seconda appliance, fai clic su
Esegui il deployment di un'altra appliance di backup/ripristino. Puoi aggiungere fino a 30 elettrodomestici
a una console di gestione. Se devi aggiungere più di 30 appliance,
crea un nuovo progetto, esegui il deployment di una nuova console di gestione e
poi esegui il deployment delle appliance.
gcloud
Puoi utilizzare Google Cloud CLI per creare una console di gestione. La creazione di appliance di backup/recupero utilizzando gcloud CLI non è supportata.
Devi utilizzare la console Google Cloud per creare appliance di backup/ripristino.
Utilizza i seguenti comandi per creare una console di gestione.
MANAGEMENT_SERVER_NAME: un nome per la console di gestione, ad esempio test name. Una volta distribuito il server di gestione, questo nome non può essere modificato. Il nome deve essere univoco per un progetto e una località.
LOCATION_ID: inserisci una
posizione supportata dalla console di gestione.
Consulta l'elenco delle località supportate utilizzando
gcloud backup-dr locations list.
PROJECT_ID: il nome del progetto, ad esempio
test-project. Utilizza questo flag se vuoi specificare un progetto diverso.
FULL_OPERATION_ID: l'ID operazione visualizzato
per la console di gestione. Ha questo formato:
projects/test-project/locations/us-central1/operations/operationID
L'output viene visualizzato come segue:
```none
Create in progress for management server [projects/test-project/locations/us-central1/operations/test-operation] \
Run the [gcloud backup-dr operations describe] command to check the status of this operation.
```
Terraform
Puoi utilizzare i seguenti link alle risorse Terraform per eseguire il deployment di una console di gestione e di un'appliance di backup/ripristino:
[[["Facile da capire","easyToUnderstand","thumb-up"],["Il problema è stato risolto","solvedMyProblem","thumb-up"],["Altra","otherUp","thumb-up"]],[["Difficile da capire","hardToUnderstand","thumb-down"],["Informazioni o codice di esempio errati","incorrectInformationOrSampleCode","thumb-down"],["Mancano le informazioni o gli esempi di cui ho bisogno","missingTheInformationSamplesINeed","thumb-down"],["Problema di traduzione","translationIssue","thumb-down"],["Altra","otherDown","thumb-down"]],["Ultimo aggiornamento 2025-09-04 UTC."],[[["\u003cp\u003eBefore deploying, users should plan their Backup and DR deployment and prepare accordingly, as outlined in the provided links.\u003c/p\u003e\n"],["\u003cp\u003eThe Backup and DR management console can be enabled via the Google Cloud console by selecting a location, setting up an appliance name, choosing a VPC network, selecting a target project, region, zone, and subnetwork.\u003c/p\u003e\n"],["\u003cp\u003eThe Google Cloud CLI can be used to create a management console, but creating backup/recovery appliances requires the use of the Google Cloud console.\u003c/p\u003e\n"],["\u003cp\u003eTerraform resources are available for deploying both a management console and a backup/recovery appliance, which can be linked directly from the documentation provided.\u003c/p\u003e\n"],["\u003cp\u003eAfter enabling the Backup and DR Service, users can protect Compute Engine instances and other workloads by configuring cloud credentials, roles, permissions, backup plans, and by discovering and adding hosts.\u003c/p\u003e\n"]]],[],null,["# Deploy Backup and DR Service\n\nBefore you begin\n----------------\n\nUse the following procedures to prepare for the deployment:\n\n- [Plan a Backup and DR deployment](/backup-disaster-recovery/docs/configuration/deployment-plan)\n\n- [Prepare to deploy Backup and DR](/backup-disaster-recovery/docs/configuration/deployment-prep)\n\nEnable Backup and DR\n--------------------\n\n### Console\n\n1. In the Google Cloud console, click\n menu **Menu**.\n\n2. Select **Operations** \\\u003e **Backup and DR**.\n\n3. Click **Enable** .\n The **Setup Backup and DR** wizard opens.\n\n4. In the **Activate the management console** section, complete\n the following:\n\n 1. Select the **Location** where you want the\n management console to be located. This is the Google Cloud\n region, see\n [Supported regions](/backup-disaster-recovery/docs/configuration/deployment-plan#regions).\n\n 2. Click **Continue**.\n\n5. In the **Deploy your first backup/recovery appliance** section, complete\n the following:\n\n 1. In **Appliance name**, enter a name for the appliance. The name must\n start with a lowercase letter and can contain up to 23 characters. The\n appliance name can only contain lowercase letters, numeric characters,\n and dashes (-). Spaces are not allowed.\n\n 2. Select a **VPC network**. You can select the network within the same\n project or from the Shared VPC project.\n\n 3. Select the **Target project** where you want to deploy your\n backup/recovery appliance to.\n\n 4. Select the **Region** and **Zone** where you want your backup/recovery appliances\n to be located. This is the Google Cloud region and zone, see\n [Supported regions](/backup-disaster-recovery/docs/configuration/deployment-plan#regions).\n\n 5. Select **Subnetwork**. This is displayed based on the selected region\n and zone.\n\n | **Caution:** Don't use the subnetwork with IP range of 172.17.0.0/16. This subnet IP is used for Backup and DR internal purposes. Using this IP range might fail the backup/recovery appliance deployment.\n 6. Select the [**Backup/recovery appliance type**](/backup-disaster-recovery/docs/configuration/deployment-plan#appliance)\n based on the workload that you want to back up.\n\n 7. Select a **Storage type** to store backups. This option only appears\n if you select **Basic for databases, VMware VMs, \\& other resources** for\n the **Backup/recovery appliance type**.\n\n 8. Click **Set up**.\n\n You are redirected to the status page. This can take about an hour to\n complete.\n6. When the deployment is complete, click **Log in to the management console**\n and the [management console](/backup-disaster-recovery/docs/concepts/introduction) will open in a new window.\n\n7. If you want to deploy a second appliance, click\n **Deploy another backup/recovery appliance**. You can add up to 30 appliances\n to a management console. If you need to add more than 30 appliances,\n create a new project, deploy a new management console, and\n then deploy the appliances.\n\n | **Warning:** After the backup/recovery appliance has been deployed, the Compute Engine VM instances listing page shows a recommendation to save money by resizing the instance. Don't do this. Resizing the appliance or changing its machine configuration---changing the series, CPU, memory---can make the backup/recovery appliance unusable.\n\n### gcloud\n\nYou can use Google Cloud CLI to create a management console. Creating\nbackup/recovery appliances using gcloud CLI is not supported.\nYou must use Google Cloud console to create backup/recovery appliances.\n\nUse the following commands to create a management console.\n\n1. Create a management console:\n\n gcloud backup-dr management-servers create \u003cvar translate=\"no\"\u003eMANAGEMENT_SERVER_NAME\u003c/var\u003e \\\n --location=\u003cvar translate=\"no\"\u003eLOCATION_ID\u003c/var\u003e \\\n\n | **Note:** By default, the project set in your Google Cloud CLI config is used. To specify a different project, use the `--project` flag.\n\n Replace the following:\n - \u003cvar translate=\"no\"\u003eMANAGEMENT_SERVER_NAME\u003c/var\u003e: a name for the management console, for example, `test name`. Once the management server is deployed, this name can't be changed. The name must be unique for a project and location.\n - \u003cvar translate=\"no\"\u003eLOCATION_ID\u003c/var\u003e: enter a management console supported [location](/backup-disaster-recovery/docs/deployment/deployment-plan#management_console_supported_regions). Get the list of supported locations by using `gcloud backup-dr locations list`.\n - \u003cvar translate=\"no\"\u003ePROJECT_ID\u003c/var\u003e: the name of your project, for example, `test-project`. Use this flag, if you want to specify a different project.\n2. You can check the status of the operation:\n\n gcloud backup-dr operations describe \u003cvar translate=\"no\"\u003eFULL_OPERATION_ID\u003c/var\u003e\n\n Replace the following:\n - \u003cvar translate=\"no\"\u003eFULL_OPERATION_ID\u003c/var\u003e: the operation ID that is displayed for the management console. It is in this format: `projects/test-project/locations/us-central1/operations/operationID`\n\n The output is displayed as: \n\n ```none\n Create in progress for management server [projects/test-project/locations/us-central1/operations/test-operation] \\\n Run the [gcloud backup-dr operations describe] command to check the status of this operation.\n ```\n\n### Terraform\n\nYou can use the following Terraform resource links to deploy a management\nconsole and backup/recovery appliance:\n\n- [Deploy a management console using Terraform resource](https://registry.terraform.io/providers/hashicorp/google-beta/latest/docs/resources/backup_dr_management_server)\n- [Deploy a backup/recovery appliance using Terraform resource](https://github.com/GoogleCloudPlatform/terraform-google-backup-dr)\n| **Note:** For debugging purposes, the Backup and DR Service collects appliance logs and sends them to Cloud Logging. Standard Cloud Logging pricing applies to this log collection. For pricing information, see [Cloud Logging pricing](/stackdriver/pricing). To reduce the cost of logging service, contact [customer support](/backup-disaster-recovery/docs/support) to disable the optional logs.\n\nWhat's next\n-----------\n\nAfter enabling Backup and DR Service, you can start exploring the\n[management console](/backup-disaster-recovery/docs/concepts/introduction) and protect workloads.\n\n### Protect workloads\n\nUse these instructions to protect Compute Engine instances:\n\n1. Learn about [Cloud credentials](/backup-disaster-recovery/docs/configuration/create-cloud-credentials).\n\n2. Assign required [roles and permission](/backup-disaster-recovery/docs/access-data/permissions).\n\n3. Define a [backup plan](/backup-disaster-recovery/docs/concepts/backup-plan).\n\n4. [Discover and protect Compute Engine instances](/backup-disaster-recovery/docs/configuration/discover-and-protect-ce-inst)\n\n### Protect databases and file systems within VMs\n\n1. [Add your hosts](/backup-disaster-recovery/docs/configuration/manage-hosts-and-their-connected-applications) and [discover applications on your hosts](/backup-disaster-recovery/docs/configuration/onboarding-wizard).\n\n2. [Install the Backup and DR agent on the hosts](/backup-disaster-recovery/docs/concepts/about-connector).\n\n3. Ensure [firewall rules](/backup-disaster-recovery/docs/configuration/deployment-plan#firewall_configurations) are set.\n\n4. Define a [backup plan](/backup-disaster-recovery/docs/concepts/backup-plan).\n\n5. [Apply a backup plan to the discovered applications](/backup-disaster-recovery/docs/create-plan/apply-backup-temp-overview)"]]
