Agrega hosts de servidores vCenter y ESX a la consola de administración
Organiza tus páginas con colecciones
Guarda y categoriza el contenido según tus preferencias.
El servicio de copia de seguridad y DR usa la protección de datos de las APIs de almacenamiento de VMware vSphere para crear copias de seguridad de las VMs de VMware y colocarlas en el grupo de instantáneas del dispositivo de copia de seguridad o recuperación, o en los grupos de OnVault.
Para realizar llamadas a la API, el dispositivo de copia de seguridad o recuperación debe conectarse al
host del servidor vCenter o ESX con un nombre de usuario y una contraseña que tengan autoridad para
realizar las acciones necesarias. En esta página, se explica cómo agregar un host de servidor vCenter o ESX en la consola de administración.
El servicio de copia de seguridad y DR establece una conexión segura con vCenter. Si no se establece una conexión segura, fallarán las tareas de copia de seguridad y restablecimiento.
La conexión a vCenter falla en cualquiera de las siguientes situaciones:
Si hay una discrepancia entre el nombre de vCenter y el nombre del certificado de vCenter.
Si los anclajes de confianza del SO no confían en el certificado de vCenter o si vCenter tiene certificados autofirmados.
Agrega un nuevo host de vCenter o ESX Server
Sigue estas instrucciones para agregar un nuevo host de servidor de vCenter o ESX a la consola de administración:
Haz clic en Administrar>Hosts.
Selecciona + Agregar host.
En el campo Nombre, ingresa el nombre de dominio completamente calificado del host de vCenter.
Asegúrate de que el nombre del campo Nombre del host sea el mismo que el del certificado de vCenter.
La conexión falla si hay una discrepancia.
Opcional: En el campo Nombre descriptivo, ingresa un nombre fácil de usar para el host.
El nombre de un host debe comenzar con una letra y puede contener letras y números (0-9). No uses guiones bajos (_) en los nombres de host.
También puedes agregar un nombre descriptivo para el host de vCenter en el campo Nombre descriptivo.
Ingresa la dirección IP del host en Dirección IP. Haz clic en + para agregar varias direcciones IP.
En la sección Appliances, selecciona uno o más dispositivos que entreguen este host.
Si la lista es larga, puedes usar el campo de búsqueda para encontrar un electrodoméstico o un grupo de electrodomésticos específicos.
En Tipo de host, selecciona vCenter o Servidor ESX.
Selecciona el modo de transporte de datos, ya sea NFS o SAN. NFS es la configuración predeterminada y recomendada. Ingresa el nombre de usuario y la contraseña para conectarte al host y, luego, usa el botón Test para validarlos.
Solo debes ingresar un puerto si se usa uno no estándar.
Configuración del host
Para proteger
Selecciona el tipo de host
Tipo de conexión
vCenter con VMs de ESXi
vCenter
El puerto de administración predeterminado de vCenter es 443. Si usas otro puerto, ingrésalo aquí. Ingresa el nombre de usuario de vCenter y la contraseña de vCenter y, luego, selecciona Probar.
ESXi independiente
Servidor ESX
El puerto de administración predeterminado del servidor ESX es 902.
Si usas otro puerto, ingrésalo aquí. Ingresa el Nombre de usuario de ESX y la Contraseña de ESX y, luego, selecciona Probar.
[[["Fácil de comprender","easyToUnderstand","thumb-up"],["Resolvió mi problema","solvedMyProblem","thumb-up"],["Otro","otherUp","thumb-up"]],[["Difícil de entender","hardToUnderstand","thumb-down"],["Información o código de muestra incorrectos","incorrectInformationOrSampleCode","thumb-down"],["Faltan la información o los ejemplos que necesito","missingTheInformationSamplesINeed","thumb-down"],["Problema de traducción","translationIssue","thumb-down"],["Otro","otherDown","thumb-down"]],["Última actualización: 2025-09-04 (UTC)"],[[["\u003cp\u003eBackup and DR Service utilizes VMware vSphere storage APIs to create backups of VMware VMs, storing them in either the snapshot pool or OnVault pools.\u003c/p\u003e\n"],["\u003cp\u003eAdding a vCenter or ESX server host requires connecting to the host with a username and password that has the authority to perform necessary actions, ensuring the host's name matches its vCenter certificate name.\u003c/p\u003e\n"],["\u003cp\u003eA secure connection between the backup/recovery appliance and the vCenter is critical for the success of backup and restore jobs, with failures occurring if there's a name mismatch or untrusted certificates.\u003c/p\u003e\n"],["\u003cp\u003eThe process of adding a new vCenter or ESX server involves entering the fully qualified domain name, optional friendly name, IP address, selecting relevant appliances, specifying host type, and choosing a data transport mode, with NFS being recommended.\u003c/p\u003e\n"],["\u003cp\u003eESX servers are typically auto-discovered when their managing vCenter host is added, and to test connection you need to validate the credentials of the vCenter or ESX server host.\u003c/p\u003e\n"]]],[],null,["# Add vCenter and ESX server hosts to the management console\n\nBackup and DR Service uses [VMware vSphere storage APIs](https://docs.vmware.com/en/VMware-vSphere/7.0/com.vmware.vsphere.storage.doc/GUID-3FD5AB1E-47B3-49B5-845E-5224BE062A59.html) data protection to\ncreate backups of VMware VMs, placing backups either in the snapshot pool\nof the backup/recovery appliance or in OnVault pools.\n\nTo make API calls, the backup/recovery appliance needs to connect to the\nvCenter or ESX server host with a username and password that has authority to\nperform the required actions. This page explains how to add a vCenter or ESX\nserver host in the management console.\n\nBefore you begin\n----------------\n\n- Be sure to review [Configure Google Cloud VMware Engine for Backup and DR protection](/backup-disaster-recovery/docs/configuration/prepare-vmware).\n\n- Make sure that the vCenter server is accessible from the appliance\n as described in [Third-party service certificate](/backup-disaster-recovery/docs/configuration/certificate).\n\n- Backup and DR Service establishes a secure connection with the vCenter. If a\n secure connection is not established, backup and restore jobs fail.\n The connection to vCenter fails in either of the following scenarios:\n\n - If there is a mismatch between the name of the vCenter and the name in the vCenter certificate.\n - If the vCenter certificate is not trusted by OS trust anchors or if vCenter has self-signed certificates.\n\nAdd a new vCenter or ESX Server host\n------------------------------------\n\nUse these instructions to add a new vCenter or ESX server host to the management console:\n\n1. Click **Manage** \\\u003e **Hosts**.\n\n2. Select **+ Add Host**.\n\n3. In the **Name** field, enter the *fully qualified domain name* of the vCenter host.\n Ensure that the name in the host's **Name** field is the same as in the vCenter certificate.\n The connection fails if there is a mismatch.\n\n4. Optional: In the **Friendly Name** field, enter a user-friendly name for the host.\n The name of a host must start with a letter, and can contain letters\n and digits (0-9). Do not underscore (*_* ) characters in hostnames.\n You can also add a friendly name for the vCenter host in the **Friendly Name**\n field.\n\n | **Note:** For existing vCenter hosts, if the hostname does not match the fully qualified domain name (FQDN) of the server, then the backup/recovery appliance automatically updates the hostname during the appliance upgrade. The existing hostname is moved to the **Name** column if the **Friendly Path** column is empty.\n5. Enter the IP address of the host in **IP Address** . Click **+** to add\n multiple IP addresses.\n\n6. In the **Appliances** section, select one or more appliances that serve this host.\n If the list is long, you can use the search field to find a specific appliance\n or group of appliances.\n\n7. In **Host Type** , select either **vCenter** or **ESX Server**.\n\n | **Note:** You normally do not need to add ESX servers as they are auto-discovered when you add the vCenter host that manages them.\n8. Select the data transport mode, either **NFS** or **SAN** . NFS is the\n recommended and default setting. Enter the username and password to\n connect to the host and then use the **Test** button to validate them.\n You only need to enter a port if a non-standard port is being used.\n\n \u003cbr /\u003e\n\n9. Click **Add**.\n\nWhat's next\n-----------\n\n- To discover and protect VM, see [Discover and protect VMware VMs](/backup-disaster-recovery/docs/configuration/discover-and-protect-vms)\n\nThe VMware administrator's guide\n--------------------------------\n\n- [Backup and DR for VMware VMs](/backup-disaster-recovery/docs/concepts/vmware-intro)\n- [Configure VMware Engine for Backup and DR protection](/backup-disaster-recovery/docs/configuration/prepare-vmware)\n\n- [Add vCenter and ESX server hosts to the management console](/backup-disaster-recovery/docs/configuration/add-vcenter-host)\n\n- [Discover and protect VMware VMs](/backup-disaster-recovery/docs/configuration/discover-and-protect-vms)\n\n- [Apply a backup template to protect a VM](/backup-disaster-recovery/docs/create-plan/apply-backup-template-to-manage-a-VM)\n\n- [Configure application settings for VMware VMs](/backup-disaster-recovery/docs/backup/configure-application-settings-for-vmware-vm)\n\n- [Restore a VMware VM](/backup-disaster-recovery/docs/restore-data/restore-vm)\n\n- [Mount a VMware image](/backup-disaster-recovery/docs/access-data/mount-vmware-image)\n\n- [Clone an image of a VMware VM](/backup-disaster-recovery/docs/access-data/clone-image-of-a-vm)\n\n- [Create LiveClone workflows](/backup-disaster-recovery/docs/access-data/create-liveclone-workflows)\n\n- [Move VM management between two backup/recovery appliances](/backup-disaster-recovery/docs/configuration/supported-vmware)"]]