[[["容易理解","easyToUnderstand","thumb-up"],["確實解決了我的問題","solvedMyProblem","thumb-up"],["其他","otherUp","thumb-up"]],[["難以理解","hardToUnderstand","thumb-down"],["資訊或程式碼範例有誤","incorrectInformationOrSampleCode","thumb-down"],["缺少我需要的資訊/範例","missingTheInformationSamplesINeed","thumb-down"],["翻譯問題","translationIssue","thumb-down"],["其他","otherDown","thumb-down"]],["上次更新時間：2025-09-04 (世界標準時間)。"],[[["\u003cp\u003eBackup and DR Service can discover and back up NFS shares on a Linux host, requiring the Backup and DR Agent to be installed on the host prior to application discovery.\u003c/p\u003e\n"],["\u003cp\u003eAdding an NFS host involves navigating to "Manage" > "Hosts" in the management console, selecting "+ Add Host", and providing the host's details such as name, IP address, and the managed appliances.\u003c/p\u003e\n"],["\u003cp\u003eA secret key, generated by the Backup and DR agent on the Linux host, is required to establish trusted communication between the host and the Backup and DR agent.\u003c/p\u003e\n"],["\u003cp\u003eNFS shares are discovered by selecting the added host and initiating the discovery process, and once discovered, they can be found using the "NFS" filter on the Applications page.\u003c/p\u003e\n"],["\u003cp\u003eBackup plans, settings, mounting options, and restore procedures can be configured or performed for NFS applications, as defined in the next steps section of the content.\u003c/p\u003e\n"]]],[],null,["# Add a Filestore or any other NFS file system or file share\n\nBackup and DR Service can discover and backup NFS shares on a Linux host.\nBefore you can run application discovery to add the NFS shares to\nBackup and DR, you must have a [Backup and DR Agent installed on the NFS host](#agent)\n\nInstall Backup and DR agent and generate secret key\n---------------------------------------------------\n\nYou need to have the secret key to provide access to the NFS host. If you\nhaven't already, [install the Backup and DR Agent using the agent install](/backup-disaster-recovery/docs/configuration/linux-agent).\n\nAdd NFS host\n------------\n\n| **Note:** If you've already added the Linux server to Backup and DR Service as a Compute Engine instance or as a VMware VM, then a host for this VM already exists and you don't need to add it again using the following procedure. Instead, find and edit that host and proceed from [step seven](#step7).\n\nUse the following instructions to add a new Linux host to the management console:\n\n1. In the management console, go to **Manage** \\\u003e **Hosts**.\n\n2. Select **+ Add Host**.\n\n3. In the **Add Host** form, enter the name and an optional friendly name. The\n name of a host must start with a letter, and can contain letters and\n digits (0-9). Underscore ('_') characters are not valid in host names.\n\n4. Enter the IP address of the host in **IP Address** . Click the\n **plus sign (+)** to add it.\n\n5. In the **Appliances** section, select the management console managed\n appliances that serve this host. If the list is long, you can use the search\n field to find a specific appliance or group of appliances.\n\n6. Leave **Host Type** as **Generic**.\n\n7. In the Backup and DR agent settings, complete the following:\n\n - Backup and DR agent port is normally port 5106. If it is anything\n else, enter the port number.\n\n - You need to supply a secret key generated on the Linux host servers\n by the Backup and DR agent to initialize trusted communications\n between the host and Backup and DR agent. This only needs to be\n done once. If you don't have the secret key, generate one by\n [Install the Backup and DR agent on a Linux host](/backup-disaster-recovery/docs/configuration/linux-agent).\n\n8. Click **Add** . If you get a partial success message, use the instructions to\n [Validate backup/recovery appliance to Backup and DR agent connectivity](/backup-disaster-recovery/docs/concepts/appliance-network-settings#validate).\n\nDiscover NFS shares\n-------------------\n\nUse the following instructions to add NFS shares:\n\n1. Discover the NFS application discovery in either ways:\n\n - In the management console, click the **Back up \\& Recover** drop-down menu and select **Back up** , and then select **All Apps**.\n\n - Go to **App Manager** \\\u003e **Applications** , select\n **Add Applications** and then select **All Apps**.\n\n2. Select the host that you added in **Add NFS host** section and click\n **Discover** . After the NFS shares are discovered, you can find them\n using the **NFS** filter in the **Applications** page.\n\nWhat's next\n-----------\n\n- To apply a backup plan for NFS applications, see\n [Apply backup template to manage mapped NFS file system](/backup-disaster-recovery/docs/create-plan/apply-backup-plan-to-filesystem)\n\n- To define NFS specific backup settings, see\n [Configure application settings to protect mapped NFS file system data](/backup-disaster-recovery/docs/backup/configure-app-settings-for-filesystems)\n\n- To mount a NFS backup, see\n [Mount a SMB share, file system, or NFS backup](/backup-disaster-recovery/docs/access-data/mount-file-system)\n\n- To restore NFS backups, see\n [File system restore](/backup-disaster-recovery/docs/access-data/filesystem-restore)"]]
