This document describes how to use Anthos Service Mesh egress gateways and other Google Cloud controls to secure outbound traffic (egress) from workloads deployed on a Google Kubernetes Engine (GKE) cluster. These controls can limit connections to external services based on the identity of the source application, a team's namespace, the destination domain, and other properties of the outgoing requests.
There is a companion tutorial that you can use as a blueprint for configuring egress controls in your own clusters.
The intended audience for this document includes network, platform, and security engineers who administer GKE clusters used by one or more software delivery teams. The controls described here might be especially useful for organizations that must demonstrate compliance with regulations (for example, GDPR and PCI).
The traditional approach to network security has been to define security perimeters around a group of applications. Firewalls are used at these perimeters to allow or deny traffic based on source and destination IP addresses, while trusting applications and traffic contained within the perimeter. However, this trust involves risk. A malicious insider, or anyone who compromises the perimeter can move freely inside the network, access and exfiltrate data, attack third-party systems, and interfere with administration systems.
When workloads running on a Kubernetes cluster make egress connections to hosts on the internet, applying traditional IP-based security controls can be complicated because:
Pod IP addresses don't adequately represent the identity of the workload making the connection. In a Kubernetes environment, Pod IP addresses are assigned ephemerally and are recycled frequently as Pods come and go.
It is often impossible to identify a small and fixed set of IP addresses for particular destination hosts. IP addresses change frequently, vary by region, and can be taken from large ranges or represent caches, proxies, or CDNs.
Multiple teams sharing the same multi-tenant cluster, with a shared range of source IPs, might have differing external connectivity requirements.
Anthos Service Mesh is Google's fully supported distribution of the open source Istio service mesh. A service mesh provides a uniform way to connect, manage, and secure application communication. Service meshes take an application-centric approach and use trusted application identities rather than a network IP focused approach.
You can deploy a service mesh transparently without the need to modify existing application code. Using a service mesh helps to decouple the work of development teams that are responsible for delivering and releasing application features, from the responsibilities of network administrators by providing declarative control of network behavior.
Anthos Service Mesh provides the option to deploy standalone forward-proxies, known as egress gateways, at the edge of the mesh. This guide explains how the features of the egress gateway proxy can be combined with Google Cloud features to control, authorize, and observe outbound traffic from workloads deployed to a GKE cluster.
The diagram below shows an architecture that takes a defense-in-depth approach to the fine-grained control of egress traffic for a cluster used by multiple teams. The controls are based both on Layer 4 (transport) and Layer 7 (application) network controls.
The architecture uses the following resources and controls:
A private GKE cluster: Nodes on a private GKE cluster only have internal IP addresses and aren't connected to the internet by default.
Cloud NAT: Cloud NAT allows outbound internet access from the private cluster.
Virtual Private Cloud (VPC) firewall rules: You configure VPC firewall rules to apply Layer 4 (Transport) controls to connections to and from the nodes in the GKE cluster. You can apply VPC firewall rules to VMs based on service accounts or network tags.
GKE node pools with different service accounts: This lets you configure different firewall rules to be applied depending on the node pool a node belongs to.
Kubernetes namespaces: You create namespaces for each team to provide isolation and delegated administrative control. Network administrators use a dedicated namespace to deploy the egress gateway and to configure routing to external hosts.
An egress gateway: Traffic leaving Pods within the mesh is directed through dedicated egress gateway proxies running on dedicated nodes. You deploy egress gateways with a horizontal Pod autoscaler so that the number of replicas scales up and down with traffic.
Authorization policies: You use mesh authorization policies to apply Layer 7 (application) controls to traffic between Pods within the mesh and to traffic leaving the mesh.
Sidecar resources: You use Sidecar resources to control the configuration scope of the sidecar proxies running in each workload Pod. You can use the Sidecar resource to configure the namespaces, Pods, and external services that are visible to a workload.
GKE Workload Identity: With Workload Identity, you can use Identity and Access Management (IAM) to grant API permissions to specific workloads following the principle of least privilege, without the need to handle secrets.
Configuring egress controls
If you use the egress gateway to secure egress traffic from your mesh, we recommend that you configure the defense-in-depth controls described in this section.
Use Private GKE with Cloud NAT
Where security is important, the first requirement of many organizations is to avoid assigning public IP addresses to their workloads. A private GKE cluster satisfies this requirement. You can configure VPC Native mode on your private cluster so that Pods and services are assigned IP addresses from secondary ranges in the VPC. VPC Native Pod IP addresses are natively routable within the VPC network.
Some workloads might require access to services outside of the VPC network and to the internet. To allow workloads to connect to external hosts without needing them to have public IP addresses, configure Cloud NAT to provide network address translation (NAT).
Ensure that Cloud NAT is configured so that the egress gateway can make a sufficient number of simultaneous connections to external destinations. You can avoid port exhaustion and problems with connection reuse delays by setting the minimum number of ports per VM appropriately. See the Cloud NAT address and port overview for more details. Increasing the number of egress gateway replicas can help to reduce the chances of endpoint-independent mapping conflicts.
Configure Private Google Access for Google APIs and services
It's likely that your workloads need to have access to Google APIs and
services. Use Private Google Access with
Custom DNS zones
to allow connectivity from private VPC subnets to Google APIs using a set of
four IP addresses. When using these IP addresses there is no need for Pods to
have external IP addresses and the traffic never leaves the Google network. You
126.96.36.199/30), depending on whether you're
VPC Service Controls.
Use Workload Identity and IAM to further secure Google APIs and services
Using Workload Identity is the recommended way to allow GKE workloads to authenticate with Google APIs and for administrators to apply "least privilege" authorization controls using IAM.
When using Private Google Access, Workload Identity, and IAM, you can safely allow workload Pods to bypass the egress gateway and connect directly to Google APIs and services.
Use Kubernetes namespaces for administrative control
Namespaces are an organizational resource that are helpful in environments where there are many users, teams, or tenants. They can be thought of as a virtual cluster, and they allow administrative responsibility for groups of Kubernetes resources to be delegated to different administrators.
Namespaces are an important feature for isolation of administrative control. However, they don't, by default, provide node isolation, data plane isolation, or network isolation.
Anthos Service Mesh builds on Kubernetes namespaces by using them as a unit of tenancy within a service mesh. Mesh authorization policies and sidecar resources can restrict visibility and access based on namespace, identity, and Layer 7 (application) attributes of network traffic.
Likewise, you can use Kubernetes network policies to allow or deny network connections at Layer 4 (transport).
Run egress gateways on dedicated gateway nodes
Running egress gateways on nodes in a dedicated gateway node pool offers several advantages. The externally facing nodes can use a hardened configuration, and you can configure VPC firewall rules to prevent workloads from reaching external hosts directly. The node pools can be independently autoscaled using the cluster autoscaler.
To allow separate administrative control of the egress gateway, deploy it to a
istio-egress namespace. However, namespaces are a cluster-wide
resource and it isn't possible to use them to control which nodes the deployment
runs on. For deployment control, use a
for the egress gateway deployment so that it runs on nodes that are labeled as
members of the gateway node pool.
Ensure that only gateway Pods can run on gateway nodes. Other Pods should be repelled from gateway nodes, otherwise the egress controls could be bypassed. Workloads can be prevented from running on certain nodes by using taints and tolerations. You should taint the nodes in the gateway node pool and add a corresponding toleration to the egress gateway deployment.
Apply VPC firewall rules to specific nodes
You configure service mesh routing to direct egress traffic from the workloads running in the default node pool through the egress gateways running in the gateway node pool. However, the routing configuration of the mesh should not be trusted as a security boundary because there are various ways in which a workload could bypass the mesh proxies.
To prevent application workloads from connecting directly to external hosts, apply restrictive egress firewall rules to the nodes in the default node pool. Apply separate firewall rules to the gateway nodes so that the egress gateway Pods running on them can connect to external hosts.
When creating a VPC firewall rule, you specify the ports
and protocols that the firewall rule allows or denies and the direction of the
traffic to which it applies. Egress rules apply to outgoing traffic and
ingress rules apply to incoming traffic. The default for egress is
and the default for ingress is
Firewall rules are applied in order based on a priority number which you can specify. Firewall rules are stateful, which means that if specific traffic from a VM is allowed, then return traffic using the same connection is also allowed.
The following diagram shows how separate firewall rules can be applied to nodes
in two different node pools based on the service account assigned to a node. In
this case, a default
deny all firewall rule denies egress access for the whole
VPC. To avoid overriding default firewall rules that are essential for your
cluster to operate, your
deny all rule should use a low priority such as
65535. An additive and higher priority egress firewall rule is applied
to the gateway nodes to allow them to connect directly to external hosts on ports
80 and 443. The default node pool has no access to external hosts.
Use Kubernetes Network policies as a firewall for Pods and namespaces
Use Kubernetes network policies to apply an extra layer of security as part of a defense-in-depth strategy. Network policies are scoped to namespaces and operate at Layer 4 (transport). With network policies, you can restrict ingress and egress:
- Between namespaces
- To Pods within a namespace
- To particular ports and IP blocks.
After any network policy selects Pods in a namespace, any connections that are not explicitly allowed are rejected. When multiple network policies are applied, the result is additive and is a union of the policies. The order in which policies are applied doesn't matter.
The companion tutorial includes the following network policy examples:
- Allow egress connections from the workload namespaces to the
istio-egressnamespaces. Pods must be able to connect to istiod and the egress gateway.
- Allow workloads to make DNS queries from the workload namespaces to port
53 in the
- Optionally, allow workloads in the same namespace to connect to each other.
- Optionally, allow egress connections between the namespaces used by different application teams.
- Allow egress connections from workload namespaces to the VIPs for the Google APIs (exposed by using Private Google Access). Anthos Service Mesh provides a managed CA and exposes it as an API, so the sidecar proxies must be able to connect to it. It's also likely that some workloads need access to Google APIs.
- Allow egress connections from workload namespaces to the GKE metadata server so that the sidecar proxies and the workloads can make metadata queries and authenticate to Google APIs.
By default, when a sidecar proxy is injected into a workload Pod,
rules are programmed so that the proxy captures all inbound and outbound TCP
traffic. However, as mentioned previously, there are ways for workloads to
bypass the proxy. VPC firewall rules prevent direct egress access from the
default nodes that run the workloads. You can use Kubernetes network policies to
ensure that no direct external egress is possible from workload namespaces and
that egress is possible to the
If you also control ingress with network policies, then you need to create ingress policies to correspond with your egress policies.
Anthos Service Mesh configuration and security
Workloads running in a service mesh are not identified based on their IP addresses. Anthos Service Mesh assigns a strong and verifiable identity in the form of an X.509 certificate and key for each workload. Trusted communication between workloads is established using authenticated and encrypted mutual TLS (mTLS) connections.
The use of mTLS authentication with a well-defined identity for each application allows you to use mesh authorization policies for fine-grained control over how workloads can communicate with external services.
Although traffic can leave the mesh directly from the sidecar proxies, if you need extra control we recommend that you route traffic through egress gateways as described in this guide.
Manage configuration for egress controls in a dedicated namespace
Allow network administrators to centrally manage controls by using a dedicated
istio-egress namespace for egress-related mesh configuration. As previously
recommended, you deploy the egress gateway to the
istio-egress namespace. You
can create and manage service entries, gateways, and authorization policies in
Require explicit configuration of external destinations
Ensure that mesh proxies are only programmed with routes to external hosts that
are explicitly defined in the service mesh registry. Set the
outbound traffic policy mode
REGISTRY_ONLY in a default
for each namespace. Setting the outbound traffic policy for the mesh should not,
on its own, be considered a secure perimeter control.
Define external destinations with Service Entries
Configure Service Entries to explicitly register external hosts in the mesh's service registry. By default, service entries are visible to all namespaces. Use the exportTo attribute to control which namespaces a service entry is visible to. Service Entries determine the outbound routes that are configured in mesh proxies but should not, on their own, be considered a secure control for determining which external hosts workloads can connect to.
Configure egress gateway behavior with the Gateway resource
Configure the load-balancing behavior of egress gateways using the Gateway resource. The load balancer can be configured for a particular set of hosts, protocols, and ports and associated with an egress gateway deployment. For example, a gateway might be configured for egress to ports 80 and 443 for any external host.
In Anthos Service Mesh 1.6 and later, auto mTLS is enabled by default. With auto mTLS, a client sidecar proxy automatically detects if the server has a sidecar. The client sidecar sends mTLS to workloads with sidecars and sends plain text traffic to workloads without sidecars. Even with auto mTLS, traffic sent to the egress gateway from sidecar proxies doesn't automatically use mTLS. To indicate how connections to the egress gateway should be secured, you have to set the TLS mode on the Gateway resource. Whenever possible, use mTLS for connections from sidecar proxies to the egress gateway.
It is possible to allow workloads to initiate TLS (HTTPS) connections
themselves. If workloads originate TLS connections, typically on port 443,
you must configure the gateway to use
passthrough mode for connections on that
port. However, using
passthrough mode means that the gateway can't apply
authorization policies based on the identity of the workload or the properties
of the encrypted request. Additionally, it is not currently possible to use
Configure Virtual Services and Destination Rules to route traffic through the gateway
Use Virtual Services and Destination Rules to configure the routing of traffic from sidecar proxies through the egress gateway to external destinations. Virtual services define rules for matching certain traffic. The matched traffic is then sent to a destination. Destination rules can define subsets (for example, the egress gateway or an external host) and how traffic should be handled when being routed to the destination.
Use a single destination rule for multiple destination hosts to explicitly specify how traffic from sidecar proxies to the gateway should be secured. As explained previously, the preferred method is for workloads to send plain text requests and for the sidecar proxy to originate a mTLS connection to the gateway.
Use a destination rule for each external host to configure the egress gateway to 'upgrade' plain HTTP requests to use a TLS (HTTPS) connection when forwarding to the destination. Upgrading a plain text connection to TLS is often referred to as TLS origination.
Control the scope of proxy configuration with the Sidecar Resource
Configure a default Sidecar resource for each namespace to control the behavior of the sidecar proxies. Use the egress property of the Sidecar resource to control and minimize the destination hosts configured in the outbound listeners of the proxies. A typical minimal configuration might include the following destinations for each namespace:
- Pods in the same namespace
- Google APIs and services
- The GKE metadata server
- Specific external hosts that have been configured using service entries
The configuration of the outbound listeners in sidecar proxies should not, on their own, be considered as security controls.
It is a best practice to use Sidecar resources for limiting the size of proxy configuration. By default, each sidecar proxy in a mesh is configured to allow it to send traffic to every other proxy. The memory consumption of sidecar proxies and the control plane can be greatly reduced by restricting the configuration of proxies to only those hosts that they need to communicate with.
Use Authorization Policy to allow or deny traffic at the egress gateway
AuthorizationPolicy is a resource that lets you configure fine-grained access control policy for mesh traffic. You can create policies to allow or deny traffic based on properties of the source, destination, or the traffic itself (for example, the host or headers of an HTTP request).
To allow or deny connections based on the source workload's identity or
namespace, the connection to the egress gateway must be authenticated with
mTLS. Connections from sidecars to the egress gateway do not automatically use
mTLS, so the destination rule for connections to the gateway must explicitly
ISTIO_MUTUAL TLS mode.
To allow or deny requests at the gateway using authorization policies, workloads should send plain HTTP requests to destinations outside of the mesh. The sidecar proxies can then forward the request to the gateway using mTLS and the gateway can originate a secure TLS connection to the external host.
To support the egress requirements of different teams and applications, configure separate "least privilege" authorization policies per namespace or workload. For example, different policies can be applied at the egress gateway by specifying rules based on the namespace of the source workload and attributes of the request as follows:
If the source namespace is team-x AND the destination host is example.com, then allow the traffic.
If the source namespace is team-y AND the destination host is httpbin.org AND the path is /status/418 then allow the traffic.
All other requests are denied.
Configure the egress gateway to originate TLS (HTTPS) connections to the destination
Configure destination rules so that the egress gateway originates TLS (HTTPS) connections to external destinations.
For TLS origination at the egress gateway to work, workloads must send plain HTTP requests. If the workload initiates TLS, the egress gateway wraps TLS on top of the original TLS, and requests to the external service will fail.
Because workloads are sending plain HTTP requests, configure the workload's sidecar proxy to establish an mTLS connection when sending them to the gateway. The egress gateway then terminates the mTLS connection and originates a regular TLS (HTTPS) connection to the destination host.
This approach has several advantages:
You can use an authorization policy to allow or deny traffic based on attributes of the source workload and the requests.
Traffic between workload Pods and the egress gateway is encrypted and authenticated (mTLS) and traffic between the egress gateway and the destination is encrypted (TLS/HTTPS).
Inside the mesh, sidecar proxies can observe and act upon the properties of HTTP requests (for example, headers), providing additional options for observability and control.
Application code can be simplified. There is no need for developers to deal with certificates or HTTPS client libraries and the service mesh can ensure secure communication with standard and up-to-date ciphers.
TLS connections that the egress gateway originates to external services can be reused for traffic from many Pods. Connection reuse is more efficient and reduces the risk of connection limits being reached.
DNS, hostnames, and wildcards
When routing, denying, or allowing traffic based on the destination host, you must have full trust in the integrity of your DNS systems to resolve DNS names to the correct IP address. On Kubernetes Engine clusters, the Kubernetes DNS service handles DNS queries and in turn delegates external queries to the GKE metadata server and Internal DNS. Set the resolution attribute of service entries to DNS when routing to external hosts, so that the sidecar proxies are responsible for making DNS queries.
Anthos Service Mesh can route traffic based on wildcard hosts. The simplest case
is a wildcard for hosts that share a common name and are hosted on a common set
of servers. For example, if a single set of servers can serve the domains
*.example.com, then a wildcard host can be used.
A standard egress gateway cannot forward based on more general and arbitrary
wildcard hosts (for example
*.com) due to certain limitations of the Envoy
proxy used by Istio. Envoy can only route traffic to predefined hosts,
predefined IP addresses, or to the original destination IP address of a request.
When using an egress gateway, the original destination IP of the request is lost
because it is replaced with the IP of the gateway and the arbitrary destination
hosts cannot be preconfigured.
Administrative enforcement of policies
Use Kubernetes Role Based Access Control (RBAC)
Only authorized administrators should be able to configure egress controls.
Kubernetes Role Based Access Control (RBAC)
to avoid unauthorized circumvention of egress controls. Apply RBAC roles so that
only network administrators can manage the
kube-system namespaces and the following resources:
Restricting the use of tolerations
As previously described you can use taints and tolerations to prevent workload Pods from being deployed on gateway nodes. However, by default, there is nothing to prevent workloads from being deployed with a toleration for the gateway nodes and hence allow egress controls to be bypassed. If it is possible to enforce centralized administrative control over deployment pipelines, you can use them to enforce restrictions on the use of certain toleration keys.
Another approach is to use Kubernetes admission control. Anthos includes a component called Policy Controller which acts as a Kubernetes admission controller and validates that deployments meet the policy constraints that you specify.
Ensure traffic is logged
It is often necessary to log all traffic that crosses network perimeters. Traffic logging is essential if you must be able to demonstrate compliance with common data protection regulations. Traffic logs are sent directly to Cloud Logging and can be accessed from the Anthos Service Mesh dashboards in the console. You can filter logs based on various attributes including source/destination, identity, namespace, attributes of the traffic, and latency.
To allow easy debugging with
kubectl, enable traffic logging to
installing Anthos Service Mesh by using the
Audit logs are sent to Cloud Logging each time Mesh CA creates a certificate for a workload.
Consider using a separate cluster for egress gateways in multi-cluster meshes
Anthos Service Mesh can be deployed across more than one GKE cluster. Multi-cluster meshes introduce new possibilities for controlling egress traffic and also some limitations.
Instead of deploying the egress gateway to a dedicated node pool, you can deploy the gateway to a separate cluster that does not run regular workloads. Using a separate cluster provides similar isolation between workloads and gateways, while avoiding the need for taints and tolerations. The egress gateway can share the separate cluster with ingress gateways or other central services.
You can use Kubernetes network policies in multi-cluster deployments, but because they operate at Layer 4 (transport), they can't restrict cross-cluster connections based on the destination namespace or Pod.
- Try out the companion tutorial
- Consult the GKE hardening guide
- Learn about managing configuration and policy across all of your infrastructure with Anthos Configuration Management
- For more reference architectures, diagrams, tutorials, and best practices, explore the Cloud Architecture Center.