Protect and recover an SAP HANA database running in Compute Engine

---

Protect the SAP production environment against data loss, errors, and corruption

SAP HANA is one of the most popular enterprise databases in the world. It's unique because it runs in-memory, so it can return query results very quickly. Many enterprises use SAP HANA for their mission critical applications. As can happen with any database, SAP HANA is susceptible to corruption, accidental deletion, or even security threats such as ransomware attacks. Backup and DR Service lets you efficiently and securely back up and recover your production systems.

For an introduction to how you use Backup and DR Service to protect your HANA databases, see Backup and DR for SAP HANA.

Note: SAP HANA Scale-Out isn't supported for backup to Persistent Disk snapshots.

Deploy Backup and DR Service first

Before you begin, you must read and complete the following procedures:

• Plan a Backup and DR deployment

• Prepare to deploy Backup and DR

• Deploy Backup and DR

See how Backup and DR Service works

Then see how Backup and DR Service works by going through Get started with Backup and DR: protect and recover a Compute Engine instance.

Prepare SAP HANA instances for backup

Before you can back up your SAP HANA instances, review the following preparation steps.

Prerequisites

• All the configured services—see SAP Note 1697613 and SAP Note 1649519— such as nameserver and indexserver must be running. You can check this in the Overview of SAP HANA studio > Operational State > Confirm all services are started.
• To allow the Backup and DR agent to perform host-side operations, use an SAP HANA hdbuserstore key instead of a username and password to communicate with the HANA database using the SAP HANA secure userstore.
• Database log_mode must be normal under the HANA Studio configuration tab.
• All SAP HANA servers (Compute Engine) that have HANA data to be protected by Backup and DR Service must have been onboarded to Backup and DR Service
• All SAP HANA servers (Compute Engine) that have HANA data to be protected by Backup and DR Service must have the Backup and DR agent installed.

• SAP HANA log backup recommendation:

  • Make sure to set the SAP HANA log backup path as the basepath_logbackup and basepath_catalogbackup in global.ini
  • Don't use the SAP HANA log backup mount to store files other than HANA archive log backup
  • By default log purge runs with every database backup. This achieves the best recovery RTO.

• To back up SAP HANA using the Persistent Disk snapshot capture method, the configuration must follow these criteria:

  • /hana/shared, and /usr/sap shouldn't be shared with data, log, or log backup volume groups or disks.
  • Log backups should have a separate disk configured, and they shouldn't be shared with data volume or log volume or with HANA binary.

Note: If production log retention is set then purge will run based on the Retention of production db logs in hour setting under Application Details & Settings. Size the HANA archive log backup disk to store archives based on the production log retention setting.

Note: If any of these prerequisites can't be met, then use the protection methods for SAP HANA detailed in Backup and DR Service for SAP HANA.

Configure the HANA userstore key

Use the following instructions to configure the HANA userstore key:

1. Create the database backup user from HANA Studio.
2. Get the instance and SQL port numbers.
3. Create the SAP HANA hdbuserstore key for system DB backup users.

Step 1: Create the database backup user from HANA Studio

Choose a database username based on the company's standard. Make sure to create this user account under SYSTEMDB.

1. Create the user under SYSTEMDB:
   • From SAP HANA Studio SYSTEMDB, go to System > Security > Users > New User.
   • Assign a username and a password.
   • Set Force password change on next logon to No.
   • HANA 2.0 (SPS01 to SPS04): Click the System privilege tab and assign privileges by selecting the following:
     • Backup admin
     • Catalog read
     • Database admin
     • Database start
     • Database stop
   • HANA 2.0 (SPS05 and later): Click the System privilege tab and assign privileges by selecting the following:
     • Backup admin
     • Catalog read
     • Database backup operator +. Database recovery operator
     • Database admin
     • Database start
     • Database stop
2. Deploy the newly created system user by clicking the green arrow.

Step 2: Get the instance and SQL port numbers

You need the HANA instance and SQL Port numbers for system DBs.

To get the instance and SQL port numbers from HANA 2.0 studio:

1. Go to System.
2. Click the Landscape tab.
3. Click the Services tab.
4. Under the Service column, navigate to the nameserver.
5. Get the value of SQL port. The instance number is the second and third digits of the SQL port number.

Step 3: Create the SAP HANA hdbuserstore key for system DB backup users

Use this naming convention for the userstore key name: For SYSTEMDB, set the key name to (Database backup username). For example, for database backup username (Actbackup), set SYSTEMDB—key_name— (ACTBACKUP).

Procedure

1. Connect to the HANA database system using SSH and log into (sid)adm: su - (sid)adm
2. Change directory: cd exe

3. Create entries in hdbuserstore using command hdbuserstore: ./hdbuserstore SET (key_name) (host name):(port) (DB_user_name) (DB_user_password)

   In this example: `./hdbuserstore SET ACTBACKUP s4hana:30013 ACTBACKUP (DB_user_password)

4. Check the keystore: ./hdbuserstore list

Set up the log mode and log backup in HANA Studio

Using the HANA Studio set the HANA log mode and log backup location for Backup and DR to take backups of HANA DB transaction logs:

1. In SAP HANA HDB studio, make sure log backup is set correctly under DATABASE (SYSTEMDB FOR HANA 2.0) > Backup > Configuration page:
   • Destination type is File.
   • Destination is set to a local file system mount path.
   • Backup interval is set to required RPO.
   • Automatic log backup is enabled.
   • Database log_mode must be set to normal.
2. Check under Database configuration: DATABASE (SYSTEMDB FOR HANA 2.0) > Configuration page. In the filter, type basepath.
3. Verify that basepath_logbackup is set correctly:
   • Set the basepath_catalogbackup to the same as basepath_logbackup.
   • Open the basepath_catalogbackup edit page and set the New value to the same as basepath_logbackup. Click Save. This ensures the backup of the catalog with log backup for point in time recovery.
4. On the HANA database server, run the re-config for the values to take effect: hdbnsutil -reconfig.

About this quickstart exercise

This exercise guides you through the steps of discovering and protecting an SAP HANA database running in a Compute Engine instance, and finally mounting a fully-functional new HANA database from the backup image to a new location.

1. Install the Backup and DR agent on the Compute Engine
2. Create a backup plan for the SAP HANA database
3. Discover and protect SAP HANA databases
4. Mount an SAP HANA backup image as a standard mount
5. Restore SAP HANA databases

Install the Backup and DR Agent on the host

The Backup and DR agent connects the Compute Engine instance to the backup/recovery appliance. To install the Backup and DR agent, see Install the Backup and DR agent on a Linux host.

Create a backup plan for the SAP HANA databases

The backup plan is how Backup and DR Service schedules backup jobs and manages storage for the backup images.

You created a backup plan for the Compute Engine instance in Get started with Backup and DR: protect and recover a Compute Engine instance. Now you must create a backup plan for the HANA database that is running inside the Compute Engine instance. See Create and apply a policy template.

Advanced Policy Settings specific to HANA databases on Compute Engine Persistent Disks

The policy template needs these specific advanced settings.

1. In the management console under Backup Plans, select Templates.
2. Select the policy template for the HANA database and click Edit.
3. On the right-hand side under Policies, click the white arrow beside Snapshot, then click Edit Policy.
4. At the bottom of the Create/Edit Policy section, click Advanced Policy Settings.

5. Within the Advanced Settings dialog, find and set the following advanced settings:

   Snapshot location: Select the region where the Persistent Disk snapshots are to be stored. By default, Multi-regional is selected (based on the source disk location). You can also change the snapshot storage location to a different region than the source disk region. When storing snapshots in a location that is different from the location of your source disk, the data travels over the network between those locations and might incur network fees. Snapshots incur the same fees as Cloud Storage egress. Learn more about the Persistent Disk snapshot.. To learn the pricing details, see disk pricing.

   Snapshot type: Select the Persistent Disk snapshot type to be used for SAP HANA backups. Snapshots incrementally back up data from Persistent Disks. During backups, a new snapshot is created to capture the current state of the Persistent Disk. This can later be used to create a new disk for mounts or restores. Compute Engine stores multiple copies of each snapshot across multiple locations with automatic checksums to ensure the integrity of your data. Learn more about the Persistent Disk snapshot. To know the pricing details, see disk pricing..

   • Standard snapshot: By default, the standard snapshot type is selected. Use the standard type if you want to retain the backups for less than 90 days.
   • Archive snapshot: Select the archive type if you want to retain backup images for a long duration. Note that the minimum billing period for the archive snapshot is 90 days irrespective of the retention period defined in the policy and that an archive type snapshot also has an additional retrieval charge if it is used in a mount or a restore job.

   Truncate (Purge) Log After Backup: Specify whether to truncate (purge) the HANA archive logs after backup. When Truncate Log after Backup is enabled, HANA archive logs are truncated. By default archive purge runs with every database backup. Use the default to achieve best recovery RTO. If production log retention is set, then purge runs based on the Retention of production db logs in hour setting under Application Details & Settings.

   • Don't truncate/purge log after backup: This is the default. In this mode the archive log won't be purged.
   • Truncate/purge log after backup: Select this option to enable archive log purge.

   Enable Database Log Backup: Set this option to "Yes". The Enable Database Log Backup option allows the backup plan policy to backup a database and all associated transaction log files. The logs are backed up when the log snapshot job runs. When set to Yes, the related options are enabled.

   RPO: Specify the database log backup in minutes. When Enable Database Log Backup is set to Yes, RPO defines the frequency for database log backup. Frequency is set in minutes and must not exceed the database backup interval. The smallest value that can be set (in minutes) is 15.

   Replicate Logs (Uses Streamsnap technology): Set this to No. This doesn't apply to SAP HANA Persistent Disk snapshot protection. This function is enabled (set to "Yes") by default. Not setting it to "No" will result in template creation error.

   Send logs to OnVault Pool: Set this to No. This doesn't apply to SAP HANA Persistent Disk snapshot protection. This function is enabled (set to "Yes") by default. Not setting it to No will result in template creation error.

   Note: Replicate Logs (Uses Streamsnap technology) and Send logs to OnVault Pool don't apply to SAP HANA Persistent Disk snapshot protection. These are both set to "Yes" by default. Set them to "No". If you don't set both of these to No, you will experience template creation errors.

Discover and protect SAP HANA databases

Note: If you are protecting a HANA database that has already been added and that already has LVM backup images, then you must change the capture method from LVM to Persistent Disk. To do this, remove the existing LVM template protection and then apply a template with new Persistent Disk capture method.

To discover HANA databases on a Compute Engine instance and then protect them with Backup and DR Service, the Compute Engine instance hosting the SAP HANA database must be onboarded before you can onboard the SAP HANA database application. You onboarded a Compute Engine instance in Get started with Backup and DR: protect and recover a Compute Engine instance.

• If this is the instance that hosts the SAP HANA database, then continue to the next section.
• If you must onboard a different Compute Engine instance to Backup and DR Service see Discover and protect Compute Engine instances.

Onboard the SAP HANA databases from the App Manager

Note: Successful Compute Engine onboarding provides the link to SAP HANA onboarding wizard (step 3 below).

To discover and protect the HANA database applications:

1. Select Add Application from the management console's App Manager > Applications page.
2. Select SAP HANA in the Add Application wizard.
3. Follow the wizard:
   • Select the database to manage from the Select section.
   • In the Manage section, apply the policy template and the resource profile that you created in Create a backup plan for the SAP HANA databases.
4. Under Application Settings in the Configure section, set the Configure backup options:
   • HANA DB user store key: This is the SAP HANA hdbuserstore key for the system database created earlier. This field is mandatory.
   • Backup capture method: choose Use Persistent Disk Snapshot.
   • Retention of production DB logs in hours: This is used to purge the HANA archive log backup from the basepath_logbackup destination. Based on this setting the log is purged older than the specified hours. With default values, all logs prior to the last data backup are purged.
   • Retention of production catalog in days: The retention of SAP HANA catalog metadata for the backup in days. The default value is 7 days.
5. Click Save > Next, then click Finish.
6. You can see the database in the App Manager Applications list with a green shield indicating that the backup plan has been applied.

Set application details & settings

After setting the staging disk format and backup method, you must enter the details and settings you want to apply to your backup plans:

1. In the management console, go to App manager and click Applications.

2. Right-click the HANA database and click Manage backup configuration.

3. At the top of the page, click Details & Settings.

4. In the Application details & settings window, configure database settings based on your host type.

   • Backup Capture Method: persistent disk
   • HANA DB User Store Key: This is the SAP HANA hdbuserstore key for the system database created earlier. This field is mandatory.
   • Retention of Production DB Logs in Hours: Production log backups will be deleted based on the number of hours passed. The default value is 2 hours.
   • Retention of Production Catalog in Days: Retention of catalog logs in days.
   • Script Timeout: This value is applied to internal backup and recovery scripts called by the Backup and DR agent. Default value is recommended.

5. Click Save changes.

Protect HANA (HA) 1+n

HANA 1+n is always discovered as a cluster application containing all node details in the metadata. After application discovery the application has the cluster host as (HANA sid name)_cluster_(site id)_(HANA hardware id). For example, if sr1 is the HANA instance, then the application name is sr1 and the hostname is sr1_cluster<_…> in the App Manager Applications list.

It is a good idea to run a force discovery after any changes to cluster node configuration—such as after adding or deleting a node from the cluster. If a node is removed or added after discovery and protection, the configuration doesn't update automatically in Backup and DR metadata, and might cause backup issues.

Note: With the failover of the HANA database from primary to secondary, the next database backup is a full snapshot that contains all the data on the Persistent Disk. Subsequent database backup snapshot will contain any new data or modified data since the first snapshot and starts a new chain.

Note: If the secondary node or database is down during backup, Persistent Disk details of the secondary node won't be saved. To perform restore using this image, you must detach and delete data, log, and log backup disks from the secondary node before restoring the image.

Prerequisites for protecting HANA HA (1+n):

• All SAP HANA servers (Compute Engine) of SAP HANA cluster must have been onboarded to Backup and DR Service
• All SAP HANA servers (Compute Engine) of SAP HANA cluster must have Backup and DR agent installed.
• All SAP HANA servers (Compute Engine) of SAP HANA cluster must have secret applied under App Manage – Manage – Host – Backup And DR Backup and DR agent Settings – Secret
• Ports need to be opened on the hosts to allow communication on port 5106. This requires an ingress firewall rule where the backup/recovery appliance is the source, the host running the Backup and DR agent is the target and the target port is 5106. Also, there is no need to add port 5106 to the default ingress rule created for the backup/recovery appliance, as this specifies the backup/recovery appliance as the target.

Mount an SAP HANA backup image as a standard mount

A standard mount provides the backup image disk of data, active log and archive log volume to the specified target. You can mount snapshot backup images of an SAP HANA database as a standard mount for:

• Any manual operation or
• To run the SNAPSHOT DATA INTEGRITY CHECK: This tool runs the SAP HANA persistence checking tool, hdbpersdiag, with the 'check all' option to verify the healthy state of data volumes from the mounted snapshot image. If the precheck discovers any corruption in the image, then the mount job fails with a descriptive error message.

Pre checks during mount

• Connector connectivity status: Verify that the Backup and DR agent is installed and secret is applied for host connectivity between the backup/recovery appliance and the Backup and DR agent.
• Mount locations specified are available for mount operation.
• HANA binary is installed
• Verify that the HANA sid the same as the source isn't up and running on the target.
• The HANA instance version is greater than 2.0SP05.
• Permission Check On Source and target Project for the Cloud Storage service

Use these instructions to mount a backup image:

1. Right-click the protected database from the App Manager Applications list, and select Access.

   Note: You can use the Managed Backup Plan status filter to show only protected databases.

2. Select a snapshot image and choose Mount.

3. On the Mount page:

   • Project name, Region, and Zone: Select the project, region, and Zone of the instance to which you want to mount the HANA database image.
   • Instance Name: Eligible Compute Engine instances (HANA nodes) will be available to choose under the drop down. Select the node for mount from the drop down. .

4. Optionally, enter a unique name associated with the mount in the Label field.

5. INCLUDED TENANT DATABASES is informational only, showing the list of tenant databases under backup image.

6. Under Mapping Options:

   • DATA Volume Mount Location: This is prepopulated with the source device path and disk type where the HANA data volume is mounted.
   • Log Volume Mount Location: This is prepopulated with the source device path and disk type where the HANA active log volume is mounted.

   • Log Backup Volume Mount Location: This is prepopulated with the source device path and disk type where the HANA archive log backup volume is mounted.

     • DEVICE PATH: is pre-populated with the source DEVICE PATH. Provide a path that isn't in use at the selected target and that you want to use to mount the snapshot image of DATA VOLUME, LOG VOLUME, and LOG BACKUP VOLUME on the target server.
     Note: The hyphen special character "-" (for example: data-1) isn't supported in the device mount location.
     • DISK TYPE: is pre-populated with the source DISK TYPE value. You can change the disk type by selecting the different type from the drop down value.

7. SNAPSHOT DATA INTEGRITY CHECK: By default the value is set to true. If you don't want to run the check, set this to false by clicking the toggle button. This tool will run the SAP HANA persistence checking tool hdbpersdiag API with the 'check all' option. This will verify the healthy state of data and active log volumes from the mounted snapshot image. If the precheck discovers any corruption in the image, then the mount job fails with a descriptive error message.

   The result of the integrity check is available under /var/act/log/(HANA sid)_dataintegrity_check.log and /usr/sap/(HANA sid)/HDB00/(host name)/trace/localclient.*.trc.

8. Click Pre-Flight check. This validates the required options on the target server for a successful mount. If the pre-flight check fails, the pre-flight will show which check failed so you can correct it and rerun the pre-flight.

9. Click Submit. You can go to the Job Monitor to view the progress and details of the job.

Unmount the mounted backup snapshot image

To remove or keep the disk after a successful mount:

• Go to Application > Access page and select the image used for mount.
• On the Access page under the Current active mount drop down, select either:
  • Unmount & Delete: Choose this option to unmount the mount point, detach the disk and delete the disk from the target server.
  • Forget Active Mount: Choose this option to leave the disk attached and mounted, but remove the metadata from Backup and DR Service. You will have to use the Google Cloud console to remove this image from the target instance after this operation is finished.

Restore SAP HANA databases

Before you can restore an SAP HANA database from a backup image, review these license requirements.

License requirements and impact on restore

• The license key for an SAP HANA database is based on the system ID and the hardware ID. After a recovery, an SAP HANA license key becomes invalid if the SID or hardware ID has changed.
• During recovery, a temporary license key is installed automatically if the backup used for recovery has a permanent license, which is still valid. You can work with the automatically installed temporary license for up to 90 days. During this time, you need to apply to SAP to have the license from the source database transferred to a new license key. You then need to install the new license key in the recovered SAP HANA database.
• If the backup that was used for recovery only had a temporary license, the database is in lockdown mode immediately after recovery.
• Source database with temporary license These are backups taken with temporary licenses.
  • Restore back to source: It is 90 days from the time of database creation and the database is in lockdown mode.
  • Restore to the new target: It fails as SAP temp license doesn't allow the restore to a new target.
• Source database with permanent license These are backups taken with permanent licenses.
  • Restore back to source: No issue.
  • Restore to the new target: It has a 90 days trial license. Backups succeed but you can't use the new backup to restore.

SAP references

• https://help.sap.com/viewer/6b94445c94ae495c83a19646e7c3fd56/2.0.02/en-US/19a0f5a85685453080f00087bb9b9c98.html
• https://help.sap.com/viewer/6b94445c94ae495c83a19646e7c3fd56/2.0.02/en-US/bddd0b28bb571014bd9592d247dcd403.html

Preflight check

Before submitting the restore procedure, preflight checks validate the required prerequisites for a successful database restore.

• HANA SID: HANA is configured on the target node with the same HANA SID name.
• Verify Database Status: HANA Database isn't up and running.
• Config file: Config file global.ini is available on target server
• Log backup path: Log backup path is set under global.ini
• HANA Version: Target HANA version is the same as the source HANA version.
• USERSTOREKEY: Provided userstore key exists on target or a valid privileged username and password is specified which exists at the time of backup.
• For restore to a new target, verify the Mount point specified under the mapping option isn't used or mounted at the target server.
• Verify Data & Log Volume Details: If the Data & Log Volume path in the config file (global.ini) is defined other than the chosen device path under mapping option then the config file (global.ini) will be updated with the path chosen under the mapping option.
• Node Status:
  • Scale-up and standalone config: Target HANA server is up and available
  • HANA HA (1+n) config: Validates that replication is disabled. Replication needs to disabled before restore can be initiated. Post restore replication needs to be reconfigured. Restoring to any node of a HANA HA (1+n) cluster results in creating a standalone application on the selected target host. User has to explicitly configure the cluster back as needed and discover the application appropriately.

Restore an SAP HANA database

1. From the App Manager Applications list, right-click the database and select Access.
2. Select the backup image to recover and choose Restore.

3. On the Restore page the options are:

   • Restore back to source: All fields are pre-populated with the source value of protected SAP HANA instance and are immutable except Application options.

   • Restore to new target: All fields are pre-populated with the source value of protected SAP HANA instance and are mutable.

     Note: Restoring to a new target will present new disks for data, active log and log backup volumes. Existing disks will remain attached to Compute Engine instances. If not needed, the user should detach and delete those disks.

   Options

   • Project name, Region, and Zone:
     • If you are restoring back to the source: All fields are pre-populated with the source value of protected SAP HANA instance and are immutable.
     • If you are restoring to a new target: To recover to a new target, select the project, region and zone of the instance that you want to recover the HANA database to.
   • Instance Name:
     • If you are restoring back to the source: The source Compute Engine instance is selected and immutable.
     • If you are restoring to a new target: Eligible Compute Engine instances (HANA nodes) will be available to choose under the drop down. Select the node for restore from the drop down.
   • Label: Optionally, enter a unique name to be associated with this mount.
   • Included Tenant Databases is informational only, showing the list of tenant databases under backup image.
   • Replace Original Application identity: This option is only available when restore is performed to a new host on the same backup/recovery appliance where the backup was originally generated.
     • Yes: This replaces the original application with the restored one, which will carry the same application ID, jobhistory, backup images, and backup plan as the original application.
     • No: This won't replace the original application. It will be discovered as a new application as part of the restore job.

   Application Options

   • Rollforward time: Choose a date and time for a database protected with logs to recover to the required point in time.

     Note: When recovering the most current backup, the rollforward control is set to the latest point in time. For a point-in-time recovery for older images, you must select the roll-forward time.

   • TARGET DATABASE SID: This is pre-populated with the protected database SID name and is immutable.

   • SAP DB USER STORE-KEY: This is pre-populated with the user store key during the backup. A new userstore key can be specified with a privileged username and password that was available during backup. This new userstore key will be created and will be used for recovery.

     • If the username and password are provided with the existing userstore key, then the userstore key will be recreated with this username and password. The validation will only be done after the systemdb recovers. The tenant recovery might fail if the username or password isn't valid or or doesn't contain the right privilege and or not available as part of the backup image.
     • If a new userstore key with username and password is specified, then the userstore key will be created with the specified userstore key name and username and password. The validation will only be done after the systemdb recovery. The tenant recovery might fail if the username or password is not valid or or doesn't contain the right privilege or isn't available as part of the backup image.
     • If no userstorekey, username, and password are passed, then during the precheck, validation will occur to check if the userstorekey used during backup exists on the target server. The precheck fails if the userstorekey used during backup isn't found. Tenant recovery might fail if the username or password isn't valid or or doesn't contain the right privilege or isn't available as part of the backup image.
     • If no userstorekey is passed, but username and password are provided, then the userstorekey used during backup will be recreated with the credentials passed on the target server. The tenant recovery might fail if the username or password isn't valid or or doesn't contain the right privileges or isn't available as part of the backup image.

   Mapping Options

   • DATA Volume Mount Location: This is prepopulated with the source device path and disk type where the HANA data volume is mounted.
   • Log Volume Mount Location: This is prepopulated with the source device path and disk type where the HANA active log volume is mounted.

   • Log backup Volume Mount Location: This is prepopulated with the source device path and disk type where the HANA archive log backup volume is mounted.

     • Device Path: Immutable for restore back to source. This can be changed during restore to a new target.

       Note: The hyphen special character "-" (ex: data-1) isn't supported in the device mount location.

     • Disk Type: Mutable for restore back to source. This can be changed during restore back to source or to a new target. The disk type lets you select the type of underlying block storage that is used for the recovered data from the backup images.

   Restore Custom HANA Configuration

   The backup image captures the customer-specific configuration settings (.ini files that have been changed from the default). You can choose to restore custom configuration settings captured at the time of backup.

4. Click the pre-flight check.

   • If the pre-flight check fails, fix the issue and resubmit the Pre-Flight Check.
   • If the pre-flight check is successful, click Submit to submit the restore job.