VMware에서 새 소프트웨어를 사용할 수 있게 되면 VMware Engine은 소프트웨어를 테스트한 다음 VMware Engine 업데이트 센터를 통해 사용자에게 제공합니다.
업데이트 센터를 사용하여 다음과 같은 업데이트를 수행할 수 있습니다.
버전 업데이트: 새 기능을 도입하고 VMware 스택 버전을 업그레이드하는 VMware 구성요소에 대한 업데이트입니다.
유지보수 패치: VMware 구성요소의 특정 문제를 해결하는 패치입니다.
보안 패치: VMware 구성요소의 보안 문제를 해결하는 패치입니다. Google에서는 보안 패치가 제공되는 즉시 실행되므로 업데이트 센터에서 이를 예약할 수 없습니다.
버전 업데이트 및 유지보수 패치는 예약 가능한 업데이트로 이를 계획하고 실행되는 시기를 제어할 수 있습니다. 보안 패치는 예약이 불가능한 업데이트로, 실행 시기를 제어할 수 없습니다.
업데이트 알림
업데이트가 사용 가능하게 되면 VMware Engine은 다음과 같은 업데이트 알림을 보냅니다.
업데이트 공지: 7일 이내에 제공되는 업데이트에 대해 모든 사용자에게 전송되는 알림입니다.
예약 사용 가능: 프라이빗 클라우드의 기본 업데이트 일정에 대한 알림입니다. 기본 시작일로부터 최대 7일 전에 버전 업데이트 및 유지보수 패치의 기본 일정을 변경할 수 있습니다.
업데이트 시작: 프라이빗 클라우드 업데이트의 특정 시작 시간을 보여주는 알림입니다.
프라이빗 클라우드 업데이트 예약
프라이빗 클라우드에 예약 사용 가능 알림을 받으면 기본 업데이트 일정을 확인하거나 버전 업데이트 및 유지보수 패치 일정을 업데이트할 수 있습니다. 기본 시작일 7일 전까지 시작일을 포함한 업데이트 일정을 변경할 수 있습니다.
일정을 변경하지 않으면 기본 일정을 사용하여 업데이트가 실행됩니다.
준비
업데이트 또는 업그레이드를 시작하기 전에 다음을 준비하는 것이 좋습니다.
스토리지 용량 확인:SLA를 유지하기 위해 vSphere 클러스터의 스토리지 공간 사용률이 80% 미만인지 확인합니다. 사용률이 80%를 초과하는 경우 업그레이드가 평소보다 오래 걸리거나 완전히 실패할 수 있습니다. 스토리지 사용률이 70%를 초과하는 경우 노드를 추가하여 클러스터를 확장하고 업그레이드 중 다운타임이 발생하지 않도록 합니다.
FTST를 0으로 설정하여 vSAN 스토리지 정책 변경: 허용되는 장애(FTT)가 0인 vSAN 스토리지 정책으로 구성된 VM을 FTT가 1인 vSAN 스토리지 정책으로 변경하여 SLA를 유지합니다.
VM CD 마운트 삭제: vMotion과 호환되지 않는 워크로드 VM에 마운트된 CD를 삭제합니다.
VMware 도구 설치 완료: 예약된 업그레이드가 시작되기 전에 VMware 도구의 설치 또는 업그레이드를 완료합니다.
VM에서 SCSI 버스 공유 삭제: VM을 끄고 싶지 않으면 VM에서 SCSI 버스 공유를 삭제합니다.
액세스되지 않는 VM 및 Datastore 삭제: vCenter 인벤토리에서 사용되지 않고 액세스할 수 없는 VM을 삭제합니다. 액세스할 수 없는 외부 Datastore를 삭제합니다.
Distributed Resource Scheduler(DRS) 규칙 사용 중지: VM을 호스트에 고정하는 DRS 규칙으로 인해 노드가 유지보수 모드로 전환되지 않습니다. 업그레이드 전에 DRS 규칙을 사용 중지하고 업그레이드가 완료된 후 사용 설정할 수 있습니다.
VMware 부가기능 및 서드 파티 솔루션 업데이트: 프라이빗 클라우드 vCenter에 배포된 VMware 부가기능 및 타사 솔루션이 이전에 언급된 업그레이드 후 버전과 호환되는지 확인합니다. 도구 예시로는 백업, 모니터링, 재해 복구 조정, 기타 유사한 기능 등이 있습니다. 솔루션 공급업체에 문의하여 업그레이드 후 호환성을 보장하기 위해 필요한 경우 미리 업데이트하세요.
업데이트 일정 보기 또는 변경하기
업데이트를 예약할 때는 업데이트가 실행되는 시간을 제어할 수 있는 업데이트 창을 제공해야 합니다. 업데이트는 이 기간 동안에만 수행되며 다음 기간에 업데이트가 계속 허용될 때까지 일시중지됩니다. 주당 최소 28시간의 업데이트 기간을 여러 날짜에 걸쳐 지정해야 하며, 업데이트 기간에서 선택한 날짜마다 최소 4시간을 지정해야 합니다. 예를 들어 일요일에 하루 종일(24시간) 업데이트 기간을 선택한 경우 일일 최소 시간 요구사항을 충족하려면 다른 요일에 4시간 기간을 포함해야 합니다.
주간 업데이트 기간에 더 많은 시간을 포함할수록 업데이트가 더 빨리 종료될 것으로 예상됩니다. 업데이트 기간을 조정하면 업데이트 센터에서 총 예상 업데이트 시간을 기준으로 예상 종료 날짜와 시간을 계산합니다. 예를 들어, 총 예상 업데이트 시간이 120시간이고 업데이트 기간을 주당 40시간으로 선택하면 업데이트가 완료되는 데 3주가 걸리며 업데이트 센터에는 시작일로부터 3주 후인 예상 종료 날짜와 시간이 표시됩니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-04(UTC)"],[],[],null,["# Update a private cloud\n======================\n\nWhen new software becomes available from VMware, VMware Engine tests\nthe software, then makes it available to you through the\nVMware Engine Update center.\n\nYou can use the Update center to perform the following updates:\n\n- **Version updates**: an update to a VMware component that introduces new features and upgrades the VMware stack version.\n- **Maintenance patches**: a patch that fixes a specific issue in a VMware component.\n- **Security patches**: a patch that fixes a security issue in a VMware component. Google runs security patches as soon as they are available, you can't schedule them in the Update center.\n\nVersion updates and maintenance patches are *schedulable updates* , which means\nthat you can plan for them and control when they run. Security patches are\n*non-schedulable updates*, which means that you can't control when they run.\n\nUpdate notifications\n--------------------\n\nAfter an update becomes available, VMware Engine sends the following\nupdate notifications:\n| **Note:** Start date and time is shown in the Coordinated Universal Time (UTC) time zone.\n\n- **Update Announcement:** a notification sent to all users about a maintenance\n patch or a security patch that will become available within seven days, or\n within 30 days for any version updates.\n\n- **Scheduling Available:** a notification about the default update schedule of\n your private cloud. You can change the default schedule for version updates\n and maintenance patches up to 15 days before the default start date. You can\n change the schedule up to 15 days from the default start date of the update.\n\n- **Update Start:** a notification about the start of an update for your\n private cloud.\n\nNotifications are shown on the Google Cloud console, vCenter UI, and NSX UI, and are\nsent to the account administrator's email.\n\nSchedule private cloud updates\n------------------------------\n\nAfter you receive a *scheduling available* notification for your private\ncloud, you can view the default update schedule and daily window of updates, or\nupdate the schedule and daily update windows for version updates and maintenance\npatches. You can make changes to the update schedule, including its start date,\nuntil 15 days before the default start date.\n\nIf you don't make changes to the schedule, the update runs using the default\nschedule.\n| **Note:** You can't change the start date of the update beyond 15 days from the default start date.\n\n- **Scheduled Start Date:** the date and time when the update operations\n start. Start time defaults to the week of the day's start time window. For\n example if the start date is on a Wednesday, the start time of the update\n uses the start time of Wednesday's window start time.\n\n- **Daily Update Window:** updates are performed during this window on a\n daily basis on day of the week basis.\n\n### Preparation\n\nGoogle recommends taking the following preparations before starting an update or\nupgrade:\n\n- **Check storage capacity:** Ensure your vSphere cluster's storage space utilization is lower than 80% to maintain the [SLA](/vmware-engine/sla). If the utilization is higher than 80%, upgrades might take longer than normal or fail completely. If your storage utilization is higher than 70%, [add a node](/vmware-engine/docs/private-clouds/howto-manage-private-cloud#add-nodes) to expand the cluster and avoid any potential downtime during upgrades.\n- **Change vSAN storage policies with FTT of 0:** Change VMs configured with a vSAN storage policy for Failures to Tolerate (FTT) of 0 to a vSAN storage policy with FTT of 1 to maintain the SLA.\n- **Remove VM CD mounts:** Remove any CDs mounted on your workload VMs that are not compatible with vMotion.\n- **Complete VMware tool installations:** Complete any installations or upgrades of VMware tools before the scheduled upgrade begins.\n- **Remove SCSI bus sharing on VMs:** Remove SCSI bus sharing on VMs if you don't want the VMs to be powered off.\n- **Remove inaccessible VMs and datastores:** Remove unused and inaccessible VMs from the vCenter inventory. Remove any inaccessible external datastores.\n- **Disable Distributed Resource Scheduler (DRS) rules:** DRS rules that pin a VM to a host prevent a node from entering maintenance mode. You can disable the DRS rules before the upgrade and enable them after the upgrade is complete.\n- **Update VMware add-ons and third-party solutions:** Verify that VMware add-ons and third party solutions deployed on your private cloud vCenter are compatible with the post-upgrade versions mentioned previously. Examples of tools include those for backup, monitoring, disaster recovery orchestration, and other similar functions. Check with the solution vendor and update ahead of time if necessary to ensure compatibility after the upgrade.\n\n### View or change the update schedule\n\nWhen you schedule an update, you must provide an update window, which enables\nyou to control when the update runs. Updates are performed only during this\nwindow and pause until the next window allows updates to continue. You must\nspecify a minimum update window of 28 hours per week, spread across multiple\ndays, with a minimum of 4 hours required for each selected day in the update\nwindow. For example, if you selected an update window of all day (24 hours) on\nSunday, you would need to include a 4 hour window on another day of the week to\nmeet the minimum hours per day requirement.\n\nThe more time you include in your weekly update window, the earlier your update\nis projected to end. As you adjust your update window, the Update center\ncalculates an estimated end date and time, based on the total estimated update\ntime. For example, if the total estimated update time is 120 hours and you\nselect an update window of 40 hours per week, the update takes 3 weeks to\ncomplete and the Update center shows you an estimated end date and time which is\n3 weeks from the start date.\n\nTo change an update schedule do the following:\n\n1. In the Google Cloud console, go to the **Update center** page.\n\n [Go to Update center](https://console.cloud.google.com/vmwareengine/upgrades)\n2. From the list of private clouds, click the **More actions**\n more_vert button in the row\n of the private cloud that you want to update.\n\n3. Click **Review schedule** . The **Review update schedule** page opens.\n\n4. Review and optionally edit the following:\n\n 1. In the **Start date** field, modify the start date for the update. The start date must be within 15 days of the default start date and must be on a day of the week that is included in the update window. You can make changes to the start date from when you receive the *scheduling available* notification up to 15 days before the default start date.\n 2. In the **Update window** section, edit the update window by selecting a combination of days and times that are permissible for the update to occur. A minimum of 28 hours is required, with a minimum of four hours per day.\n5. Review **Estimated end date and time** , then click **Schedule update**.\n\nVMware Engine starts the update on the start date, at the\nstart time specified for the day of the week that the start date falls on.\nVMware Engine pauses the update outside of the times specified in the\nmaintenance window.\n\n### View details or view update status\n\nTo view the status of an update, do the following:\n\n1. In the Google Cloud console, go to the **Update center** page.\n\n [Go to Update center](https://console.cloud.google.com/vmwareengine/upgrades)\n2. Click **View details**.\n\nUpdates can be in one of the following states:\n\n- **Scheduled by default**: The update has a default schedule that you can review and edit until 7 days before the default start date.\n- **Scheduled by user**: The default update schedule was changed by a user.\n- **In progress**: The update is ongoing.\n- **Paused**: The update is paused and waiting for the next specified window, or an issue was found and the update will resume after it's fixed.\n- **Canceled**: The update was canceled by the system.\n- **Failed**: The update failed.\n- **Completed**: The update was completed and the private cloud is operational.\n\nAdditional information about the private cloud and update type are shown on this\npage.\n| **Note:** Components update and version information will show **-** for security updates."]]