- NAME
-
- gcloud compute vpn-tunnels create - create a VPN tunnel
- SYNOPSIS
-
-
gcloud compute vpn-tunnels createNAME--shared-secret=SHARED_SECRET(--peer-address=PEER_ADDRESS|--peer-external-gateway=PEER_EXTERNAL_GATEWAY|--peer-gcp-gateway=PEER_GCP_GATEWAY|--peer-gcp-gateway-region=PEER_GCP_GATEWAY_REGION) (--target-vpn-gateway=TARGET_VPN_GATEWAY|--target-vpn-gateway-region=TARGET_VPN_GATEWAY_REGION|--vpn-gateway=VPN_GATEWAY|--vpn-gateway-region=VPN_GATEWAY_REGION) [--description=DESCRIPTION] [--ike-version=IKE_VERSION] [--interface=INTERFACE] [--local-traffic-selector=CIDR,[CIDR,…]] [--peer-external-gateway-interface=PEER_EXTERNAL_GATEWAY_INTERFACE] [--region=REGION] [--remote-traffic-selector=CIDR,[CIDR,…]] [--router=ROUTER] [--router-region=ROUTER_REGION] [GCLOUD_WIDE_FLAG …]
-
- DESCRIPTION
-
gcloud compute vpn-tunnels createis used to create a Classic VPN tunnel between a target VPN gateway in Google Cloud Platform and a peer address; or create Highly Available VPN tunnel between HA VPN gateway and another HA VPN gateway, or Highly Available VPN tunnel between HA VPN gateway and an external VPN gateway. - POSITIONAL ARGUMENTS
-
NAME- Name of the VPN Tunnel to create.
- REQUIRED FLAGS
-
- Shared secret consisting of printable characters. Valid arguments match the regular expression [ -~]+
-
Exactly one of these must be specified:
--peer-address=PEER_ADDRESS- Valid IPV4 address representing the remote tunnel endpoint, the peer address must be specified when creating Classic VPN tunnels from Classic Target VPN gateway
--peer-external-gateway=PEER_EXTERNAL_GATEWAY- Peer side external VPN gateway representing the remote tunnel endpoint, this flag is used when creating HA VPN tunnels from Google Cloud to your external VPN gateway.Either --peer-external-gateway or --peer-gcp-gateway must be specified when creating VPN tunnels from High Available VPN gateway.
--peer-gcp-gateway=PEER_GCP_GATEWAY- Reference to the peer side Highly Available VPN gateway.
--peer-gcp-gateway-region=PEER_GCP_GATEWAY_REGION-
Region of the VPN Gateway to operate on. Should be the same as region, if not
specified, it will be automatically set. Overrides the default
compute/regionproperty value for this command invocation.
-
Exactly one of these must be specified:
--target-vpn-gateway=TARGET_VPN_GATEWAY- A reference to a Cloud VPN Classic Target VPN Gateway.
--target-vpn-gateway-region=TARGET_VPN_GATEWAY_REGION-
Region of the Target VPN Gateway to operate on. Should be the same as region, if
not specified, it will be automatically set. Overrides the default
compute/regionproperty value for this command invocation. --vpn-gateway=VPN_GATEWAY- Reference to a Highly Available VPN gateway.
--vpn-gateway-region=VPN_GATEWAY_REGION-
Region of the VPN Gateway to operate on. Should be the same as region, if not
specified, it will be automatically set. Overrides the default
compute/regionproperty value for this command invocation.
- OPTIONAL FLAGS
-
--description=DESCRIPTION- An optional, textual description for the VPN tunnel.
--ike-version=IKE_VERSION-
Internet Key Exchange protocol version number. Default is 2.
IKE_VERSIONmust be one of:1,2. --interface=INTERFACE-
Numeric interface ID of the VPN gateway with which this VPN tunnel is
associated. This flag is required if the tunnel is being attached to a Highly
Available VPN gateway. This option is only available for use with Highly
Available VPN gateway and must be omitted if the tunnel is going to be connected
to a Classic VPN gateway.
INTERFACEmust be one of:0,1. --local-traffic-selector=CIDR,[CIDR,…]-
Traffic selector is an agreement between IKE peers to permit traffic through a
tunnel if the traffic matches a specified pair of local and remote addresses.
--local-traffic-selector allows to configure the local addresses that are permitted. The value should be a comma separated list of CIDR formatted strings. Example: 192.168.0.0/16,10.0.0.0/24.
Local traffic selector must be specified only for VPN tunnels that do not use dynamic routing with a Cloud Router. Omit this flag when creating a tunnel using dynamic routing, including a tunnel for a Highly Available VPN gateway.
--peer-external-gateway-interface=PEER_EXTERNAL_GATEWAY_INTERFACE-
Interface ID of the external VPN gateway to which this VPN tunnel is connected
to. This flag is required if the tunnel is being created from a Highly Available
VPN gateway to an External Vpn Gateway.
PEER_EXTERNAL_GATEWAY_INTERFACEmust be one of:0,1,2,3. --region=REGION-
Region of the VPN Tunnel to create. If not specified, you might be prompted to
select a region (interactive mode only).
To avoid prompting when this flag is omitted, you can set the
compute/regiongcloud config set compute/region REGIONA list of regions can be fetched by running:
gcloud compute regions listTo unset the property, run:
gcloud config unset compute/regionAlternatively, the region can be stored in the environment variable
CLOUDSDK_COMPUTE_REGION --remote-traffic-selector=CIDR,[CIDR,…]-
Traffic selector is an agreement between IKE peers to permit traffic through a
tunnel if the traffic matches a specified pair of local and remote addresses.
--remote-traffic-selector allows to configure the remote addresses that are permitted. The value should be a comma separated list of CIDR formatted strings. Example: 192.168.0.0/16,10.0.0.0/24.
Remote traffic selector must be specified for VPN tunnels that do not use dynamic routing with a Cloud Router. Omit this flag when creating a tunnel using dynamic routing, including a tunnel for a Highly Available VPN gateway.
--router=ROUTER- The Router to use for dynamic routing.
--router-region=ROUTER_REGION-
Region of the router to operate on. If not specified, you might be prompted to
select a region (interactive mode only).
To avoid prompting when this flag is omitted, you can set the
compute/regiongcloud config set compute/region REGIONA list of regions can be fetched by running:
gcloud compute regions listTo unset the property, run:
gcloud config unset compute/regionAlternatively, the region can be stored in the environment variable
CLOUDSDK_COMPUTE_REGION
- GCLOUD WIDE FLAGS
-
These flags are available to all commands:
--access-token-file,--account,--billing-project,--configuration,--flags-file,--flatten,--format,--help,--impersonate-service-account,--log-http,--project,--quiet,--trace-token,--user-output-enabled,--verbosity.Run
$ gcloud helpfor details. - NOTES
-
These variants are also available:
gcloud alpha compute vpn-tunnels creategcloud beta compute vpn-tunnels create
Except as otherwise noted, the content of this page is licensed under the Creative Commons Attribution 4.0 License, and code samples are licensed under the Apache 2.0 License. For details, see the Google Developers Site Policies. Java is a registered trademark of Oracle and/or its affiliates.
Last updated 2024-06-04 UTC.