gcloud compute routers update-bgp-peer

NAME
gcloud compute routers update-bgp-peer - update a BGP peer on a Compute Engine router
SYNOPSIS
gcloud compute routers update-bgp-peer NAME --peer-name=PEER_NAME [--advertised-route-priority=ADVERTISED_ROUTE_PRIORITY] [--advertisement-mode=MODE] [--async] [--clear-md5-authentication-key] [--custom-learned-route-priority=PRIORITY] [--[no-]enable-ipv4] [--[no-]enable-ipv6] [--[no-]enabled] [--interface=INTERFACE] [--ip-address=IP_ADDRESS] [--ipv4-nexthop-address=IPV4_NEXTHOP_ADDRESS] [--ipv6-nexthop-address=IPV6_NEXTHOP_ADDRESS] [--md5-authentication-key=MD5_AUTHENTICATION_KEY] [--peer-asn=PEER_ASN] [--peer-ip-address=PEER_IP_ADDRESS] [--peer-ipv4-nexthop-address=PEER_IPV4_NEXTHOP_ADDRESS] [--peer-ipv6-nexthop-address=PEER_IPV6_NEXTHOP_ADDRESS] [--region=REGION] [--set-advertisement-groups=[GROUP,…]] [--set-advertisement-ranges=[CIDR_RANGE=DESC,…]] [--set-custom-learned-route-ranges=[CIDR_RANGE,…]] [--add-advertisement-groups=[GROUP,…]     | --add-advertisement-ranges=[CIDR_RANGE=DESC,…]     | --remove-advertisement-groups=[GROUP,…]     | --remove-advertisement-ranges=[CIDR_RANGE,…]] [--add-custom-learned-route-ranges=[CIDR_RANGE,…]     | --remove-custom-learned-route-ranges=[CIDR_RANGE,…]] [--bfd-min-receive-interval=BFD_MIN_RECEIVE_INTERVAL --bfd-min-transmit-interval=BFD_MIN_TRANSMIT_INTERVAL --bfd-multiplier=BFD_MULTIPLIER --bfd-session-initialization-mode=BFD_SESSION_INITIALIZATION_MODE] [GCLOUD_WIDE_FLAG]
DESCRIPTION
gcloud compute routers update-bgp-peer is used to update a BGP peer on a Compute Engine router.
POSITIONAL ARGUMENTS
NAME
Name of the router to operate on.
REQUIRED FLAGS
--peer-name=PEER_NAME
The name of the new BGP peer being updated.
OPTIONAL FLAGS
--advertised-route-priority=ADVERTISED_ROUTE_PRIORITY
The priority of routes advertised to this BGP peer. In the case where there is more than one matching route of maximum length, the routes with lowest priority value win. 0 <= priority <= 65535. If not specified, will use Google-managed priorities.
--advertisement-mode=MODE
The new advertisement mode for this peer. MODE must be one of:
CUSTOM
Custom (user-configured) BGP advertisements.
DEFAULT
Default (Google-managed) BGP advertisements.
--async
Return immediately, without waiting for the operation in progress to complete.
--clear-md5-authentication-key
If specified, remove MD5 authentication from the BGP peer.
--custom-learned-route-priority=PRIORITY
An integral value 0 <= priority <= 65535, to be applied to all custom learned route IP address ranges for this peer. If not specified, a Google-managed priority value of 100 is used. The routes with the lowest priority value win.
--[no-]enable-ipv4
If IPv4 is enabled, the peer connection can be established with IPv4 route exchange. If disabled, no IPv4 route exchange is allowed on any active session. Use --enable-ipv4 to enable and --no-enable-ipv4 to disable.
--[no-]enable-ipv6
If IPv6 is enabled, the peer connection can be established with IPv6 route exchange. If disabled, no IPv6 route exchange is allowed on any active session. Use --enable-ipv6 to enable and --no-enable-ipv6 to disable.
--[no-]enabled
If enabled, the peer connection can be established with routing information. If disabled, any active session with the peer is terminated and all associated routing information is removed. Use --enabled to enable and --no-enabled to disable.
--interface=INTERFACE
The name of the interface for this BGP peer.
--ip-address=IP_ADDRESS
The address of the Cloud Router interface for this BGP peer. Must be a link-local IPv4 address in the range 169.254.0.0/16 or an ULA IPv6 address in the range fdff:1::/64. It must also be in the same subnet as the interface address of the peer router.
--ipv4-nexthop-address=IPV4_NEXTHOP_ADDRESS
If IPv4 route exchange is enabled for IPv6-based BGP, the IPv4 next hop address of the Cloud Router interface for this BGP peer. Ignored otherwise. Must be a Google owned link-local IPv4 address in the range 169.254.0.0/16 and must belong to the same subnet as the interface address of the peer router.
--ipv6-nexthop-address=IPV6_NEXTHOP_ADDRESS
If IPv6 route exchange is enabled for IPv4-based BGP, the IPv6 next hop address of the Cloud Router interface for this BGP peer. Ignored otherwise. Must be a Google owned global unicast IPv6 address belonging to the range 2600:2d00:0:2:0:0:0:0/64 or 2600:2d00:0:3:0:0:0:0/64 and must belong to same subnet as the interface address of the peer router.
--md5-authentication-key=MD5_AUTHENTICATION_KEY
The MD5 authentication key for this BGP peer. Maximum length is 80 characters. Can contain only printable ASCII characters.
--peer-asn=PEER_ASN
The BGP autonomous system number (ASN) for this BGP peer. Must be a 16-bit or 32-bit private ASN as defined in https://tools.ietf.org/html/rfc6996, for example --asn=64512.
--peer-ip-address=PEER_IP_ADDRESS
The address of the peer router. Must be a link-local IPv4 address in the range 169.254.0.0/16 or an ULA IPv6 address in the range fdff:1::/64.
--peer-ipv4-nexthop-address=PEER_IPV4_NEXTHOP_ADDRESS
If IPv4 route exchange is enabled for IPv6-based BGP, the IPv4 next hop address of the peer router. Ignored otherwise. Must be a Google owned link-local IPv4 address in the range 169.254.0.0/16.
--peer-ipv6-nexthop-address=PEER_IPV6_NEXTHOP_ADDRESS
If IPv6 route exchange is enabled for IPv4-based BGP, the IPv6 next hop address of the peer router. Ignored otherwise. Must be a Google owned global unicast IPv6 address belonging to the range 2600:2d00:0:2:0:0:0:0/64 or 2600:2d00:0:3:0:0:0:0/64.
--region=REGION
Region of the router to operate on. If not specified, you might be prompted to select a region (interactive mode only).

To avoid prompting when this flag is omitted, you can set the compute/region property:

gcloud config set compute/region REGION

A list of regions can be fetched by running:

gcloud compute regions list

To unset the property, run:

gcloud config unset compute/region

Alternatively, the region can be stored in the environment variable CLOUDSDK_COMPUTE_REGION.

--set-advertisement-groups=[GROUP,…]
The list of pre-defined groups of IP ranges to dynamically advertise on this peer. This list can only be specified in custom advertisement mode.

GROUP must be (only one value is supported):

ALL_SUBNETS
Automatically advertise all available subnets. This excludes any routes learned for subnets that use VPC Network Peering.
--set-advertisement-ranges=[CIDR_RANGE=DESC,…]
The list of individual IP ranges, in CIDR format, to dynamically advertise on this peer. Each IP range can (optionally) be given a text description DESC. For example, to advertise a specific range, use --set-advertisement-ranges=192.168.10.0/24. To store a description with the range, use --set-advertisement-ranges=192.168.10.0/24=my-networks. This list can only be specified in custom advertisement mode.
--set-custom-learned-route-ranges=[CIDR_RANGE,…]
The list of user-defined custom learned route IP address ranges for this peer. This list is a comma separated IP address ranges such as 1.2.3.4,6.7.0.0/16,2001:db8:abcd:12::/64 where each IP address range must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as a /32 singular IP address range for IPv4, and /128 for IPv6.
At most one of these can be specified:
--add-advertisement-groups=[GROUP,…]
A list of pre-defined groups of IP ranges to dynamically advertise on this peer. This list is appended to any existing advertisements. This field can only be specified in custom advertisement mode.

GROUP must be (only one value is supported):

ALL_SUBNETS
Automatically advertise all available subnets. This excludes any routes learned for subnets that use VPC Network Peering.
--add-advertisement-ranges=[CIDR_RANGE=DESC,…]
A list of individual IP ranges, in CIDR format, to dynamically advertise on this peer. This list is appended to any existing advertisements. Each IP range can (optionally) be given a text description DESC. For example, to advertise a specific range, use --advertisement-ranges=192.168.10.0/24. To store a description with the range, use --advertisement-ranges=192.168.10.0/24=my-networks. This list can only be specified in custom advertisement mode.
--remove-advertisement-groups=[GROUP,…]
A list of pre-defined groups of IP ranges to remove from dynamic advertisement on this peer. Each group in the list must exist in the current set of custom advertisements. This field can only be specified in custom advertisement mode.

GROUP must be (only one value is supported):

ALL_SUBNETS
Automatically advertise all available subnets. This excludes any routes learned for subnets that use VPC Network Peering.
--remove-advertisement-ranges=[CIDR_RANGE,…]
A list of individual IP ranges, in CIDR format, to remove from dynamic advertisement on this peer. Each IP range in the list must exist in the current set of custom advertisements. This field can only be specified in custom advertisement mode.
At most one of these can be specified:
--add-custom-learned-route-ranges=[CIDR_RANGE,…]
A list of user-defined custom learned route IP address ranges to be added to this peer. This list is a comma separated IP address ranges such as 1.2.3.4,6.7.0.0/16,2001:db8:abcd:12::/64 where each IP address range must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as a /32 singular IP address range for IPv4, and /128 for IPv6.
--remove-custom-learned-route-ranges=[CIDR_RANGE,…]
A list of user-defined custom learned route IP address ranges to be removed from this peer. This list is a comma separated IP address ranges such as 1.2.3.4,6.7.0.0/16,2001:db8:abcd:12::/64 where each IP address range must be a valid CIDR-formatted prefix. If an IP address is provided without a subnet mask, it is interpreted as a /32 singular IP address range for IPv4, and /128 for IPv6.
Arguments to update BFD (Bidirectional Forwarding Detection) settings:
--bfd-min-receive-interval=BFD_MIN_RECEIVE_INTERVAL
The minimum receive interval between BFD control packets. The default is 1000 milliseconds. See $ gcloud topic datetimes for information on duration formats.
--bfd-min-transmit-interval=BFD_MIN_TRANSMIT_INTERVAL
The minimum transmit interval between BFD control packets. The default is 1000 milliseconds. See $ gcloud topic datetimes for information on duration formats.
--bfd-multiplier=BFD_MULTIPLIER
The number of consecutive BFD control packets that must be missed before BFD declares that a peer is unavailable.
--bfd-session-initialization-mode=BFD_SESSION_INITIALIZATION_MODE
The BFD session initialization mode for this BGP peer. Must be one of:

ACTIVE - The Cloud Router will initiate the BFD session for this BGP peer.

PASSIVE - The Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer.

DISABLED - BFD is disabled for this BGP peer.

BFD_SESSION_INITIALIZATION_MODE must be one of:

ACTIVE
The Cloud Router will initiate the BFD session for this BGP peer.
DISABLED
BFD is disabled for this BGP peer.
PASSIVE
The Cloud Router will wait for the peer router to initiate the BFD session for this BGP peer.
GCLOUD WIDE FLAGS
These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.

Run $ gcloud help for details.

NOTES
These variants are also available:
gcloud alpha compute routers update-bgp-peer
gcloud beta compute routers update-bgp-peer