gcloud compute interconnects attachments dedicated update

NAME
gcloud compute interconnects attachments dedicated update - update a Compute Engine dedicated interconnect attachment
SYNOPSIS
gcloud compute interconnects attachments dedicated update NAME [--bandwidth=BANDWIDTH] [--candidate-ipv6-subnets=[IPV6_SUBNET,…]] [--cloud-router-ipv6-interface-id=INTERFACE_ID] [--customer-router-ipv6-interface-id=PEER_INTERFACE_ID] [--description=DESCRIPTION] [--enable-admin] [--mtu=MTU] [--region=REGION] [--stack-type=STACK_TYPE] [GCLOUD_WIDE_FLAG …]
DESCRIPTION
gcloud compute interconnects attachments dedicated update is used to update interconnect attachments. An interconnect attachment is what binds the underlying connectivity of an interconnect to a path into and out of the customer's cloud network.
POSITIONAL ARGUMENTS
NAME
Name of the interconnect attachment to patch.
FLAGS
--bandwidth=BANDWIDTH
Provisioned capacity of the attachment. BANDWIDTH must be one of:
50m
50 Mbit/s
100m
100 Mbit/s
200m
200 Mbit/s
300m
300 Mbit/s
400m
400 Mbit/s
500m
500 Mbit/s
1g
1 Gbit/s
2g
2 Gbit/s
5g
5 Gbit/s
10g
10 Gbit/s
20g
20 Gbit/s
50g
50 Gbit/s
--candidate-ipv6-subnets=[IPV6_SUBNET,…]
The candididate-ipv6-subnets field is not available.
--cloud-router-ipv6-interface-id=INTERFACE_ID
cloud-router-ipv6-interface-id field is not available.
--customer-router-ipv6-interface-id=PEER_INTERFACE_ID
customer-router-ipv6-interface-id field is not available.
--description=DESCRIPTION
Human-readable plain-text description of attachment.
--enable-admin
Administrative status of the interconnect attachment. When this is enabled, the attachment is operational and will carry traffic. Use --no-enable-admin to disable it.
--mtu=MTU
Maximum transmission unit (MTU) is the size of the largest IP packet passing through this interconnect attachment. Must be one of 1440, 1460, 1500, or 8896. If not specified, the value will default to 1440.
--region=REGION
Region of the interconnect attachment to patch. If not specified, you might be prompted to select a region (interactive mode only).

To avoid prompting when this flag is omitted, you can set the compute/region property: 

gcloud config set compute/region REGION

A list of regions can be fetched by running: 

gcloud compute regions list

To unset the property, run: 

gcloud config unset compute/region

Alternatively, the region can be stored in the environment variable CLOUDSDK_COMPUTE_REGION.

--stack-type=STACK_TYPE
Stack type of the protocol(s) enabled on this interconnect attachment. STACK_TYPE must be one of:
IPV4_IPV6
Both IPv4 and IPv6 protocols are enabled on this attachment.
IPV4_ONLY
Only IPv4 protocol is enabled on this attachment.
GCLOUD WIDE FLAGS
These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.

Run $ gcloud help for details.

NOTES
These variants are also available: 
gcloud alpha compute interconnects attachments dedicated update

gcloud beta compute interconnects attachments dedicated update