gcloud alpha compute networks update

NAME
gcloud alpha compute networks update - update a Compute Engine network
SYNOPSIS
gcloud alpha compute networks update NAME [--async] [--[no-]enable-ula-internal-ipv6] [--internal-ipv6-range=INTERNAL_IPV6_RANGE] [--mtu=MTU] [--network-firewall-policy-enforcement-order=NETWORK_FIREWALL_POLICY_ENFORCEMENT_ORDER] [--bgp-best-path-selection-mode=BGP_BEST_PATH_SELECTION_MODE --[no-]bgp-bps-always-compare-med --bgp-bps-inter-region-cost=BGP_BPS_INTER_REGION_COST] [--bgp-routing-mode=MODE     | --switch-to-custom-subnet-mode] [GCLOUD_WIDE_FLAG]
DESCRIPTION
(ALPHA) gcloud alpha compute networks update is used to update Compute Engine networks.
POSITIONAL ARGUMENTS
NAME
Name of the network to operate on.
FLAGS
--async
Return immediately, without waiting for the operation in progress to complete.
--[no-]enable-ula-internal-ipv6
Enable/disable ULA internal IPv6 on this network. Enabling this feature will assign a /48 from google defined ULA prefix fd20::/20.

Use --enable-ula-internal-ipv6 to enable and --no-enable-ula-internal-ipv6 to disable.

--internal-ipv6-range=INTERNAL_IPV6_RANGE
When enabling ULA internal IPv6, caller can optionally specify the /48 range they want from the google defined ULA prefix fd20::/20. ULA_IPV6_RANGE must be a valid /48 ULA IPv6 address and within the fd20::/20. Operation will fail if the speficied /48 is already in used by another resource. If the field is not speficied, then a /48 range will be randomly allocated from fd20::/20 and returned via this field.
--mtu=MTU
Maximum transmission unit (MTU) is the size of the largest IP packet that can be transmitted on this network. Default value is 1460 bytes. The minimum value is 1300 bytes and the maximum value is 8896 bytes. The MTU advertised via DHCP to all instances attached to this network.
--network-firewall-policy-enforcement-order=NETWORK_FIREWALL_POLICY_ENFORCEMENT_ORDER
The Network Firewall Policy enforcement order of this network. If not specified, defaults to AFTER_CLASSIC_FIREWALL.

NETWORK_FIREWALL_POLICY_ENFORCEMENT_ORDER must be one of:

AFTER_CLASSIC_FIREWALL
Network Firewall Policy is enforced after classic firewall.
BEFORE_CLASSIC_FIREWALL
Network Firewall Policy is enforced before classic firewall.
BGP Best Path Selection flags
--bgp-best-path-selection-mode=BGP_BEST_PATH_SELECTION_MODE
The BGP best path selection algorithm to be employed. MODE can be LEGACY or STANDARD. BGP_BEST_PATH_SELECTION_MODE must be one of:
LEGACY
Dynamic routes are ranked based on the multiple exit-discriminator (MED) BGP attribute. When global routing is enabled, the MED of the routes received from other regions is the original MED plus the region-to-region cost.
STANDARD
Dynamic routes are ranked based on AS Path, Origin, Neighbor ASN and MED BGP attributes. When global routing is enabled, region-to-region cost is used as a tiebreaker. This mode offers customizations to fine-tune BGP best path routing with additional knobs like --bgp-bps-always-compare-med and --bgp-bps-inter-region-cost
--[no-]bgp-bps-always-compare-med
Enables/disables the comparison of MED across routes with different Neighbor ASNs. This value can only be set if the --bgp-best-path-selection-mode is STANDARD. Use --bgp-bps-always-compare-med to enable and --no-bgp-bps-always-compare-med to disable.
--bgp-bps-inter-region-cost=BGP_BPS_INTER_REGION_COST
Defines the preferred approach for handling inter-region cost in the selection process. This value can only be set if the --bgp-best-path-selection-mode is STANDARD. BGP_BPS_INTER_REGION_COST must be one of:
ADD_COST_TO_MED
Adds inter-region cost to the MED before comparing the MED value. When multiple routes have the same value after the Add-cost-to-med comparison, the route selection continues and prefers the route with lowest cost.
DEFAULT
MED is compared as originally received from peers. When multiple routes have the same MED, cost is evaluated as the next step.
At most one of these can be specified:
--bgp-routing-mode=MODE
The target BGP routing mode for this network. MODE must be one of:
global
Cloud Routers in this network advertise subnetworks from all regions to their BGP peers, and program instances in all regions with the router's best learned BGP routes.
regional
Cloud Routers in this network advertise subnetworks from their local region only to their BGP peers, and program instances in their local region only with the router's best learned BGP routes.
--switch-to-custom-subnet-mode
Switch to custom subnet mode. This action cannot be undone.
GCLOUD WIDE FLAGS
These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.

Run $ gcloud help for details.

NOTES
This command is currently in alpha and might change without notice. If this command fails with API permission errors despite specifying the correct project, you might be trying to access an API with an invitation-only early access allowlist. These variants are also available:
gcloud compute networks update
gcloud beta compute networks update