Create short-lived credentials for a service account

This page explains how to create short-lived credentials for a service account, which you can use to impersonate the service account. Depending on the type of token you create, the short-lived token provides the identity (for ID tokens) or permissions (for access tokens) associated with the service account.

If your system architecture requires you to use a series of token generation calls, you can use a delegation chain consisting of several service accounts. In most cases, the direct method, as explained on this page, is sufficient.

Before you begin

  • Enable the IAM and Service Account Credentials APIs:

    gcloud services enable iam.googleapis.com iamcredentials.googleapis.com
  • Set up authentication.

    Select the tab for how you plan to use the samples on this page:

    Console

    When you use the Google Cloud console to access Google Cloud services and APIs, you don't need to set up authentication.

    gcloud

    In the Google Cloud console, activate Cloud Shell.

    Activate Cloud Shell

    At the bottom of the Google Cloud console, a Cloud Shell session starts and displays a command-line prompt. Cloud Shell is a shell environment with the Google Cloud CLI already installed and with values already set for your current project. It can take a few seconds for the session to initialize.

    Go

    To use the Go samples on this page in a local development environment, install and initialize the gcloud CLI, and then set up Application Default Credentials with your user credentials.

    1. Install the Google Cloud CLI.
    2. To initialize the gcloud CLI, run the following command:

      gcloud init
    3. If you're using a local shell, then create local authentication credentials for your user account:

      gcloud auth application-default login

      You don't need to do this if you're using Cloud Shell.

    For more information, see Set up authentication for a local development environment in the Google Cloud authentication documentation.

    Java

    To use the Java samples on this page in a local development environment, install and initialize the gcloud CLI, and then set up Application Default Credentials with your user credentials.

    1. Install the Google Cloud CLI.
    2. To initialize the gcloud CLI, run the following command:

      gcloud init
    3. If you're using a local shell, then create local authentication credentials for your user account:

      gcloud auth application-default login

      You don't need to do this if you're using Cloud Shell.

    For more information, see Set up authentication for a local development environment in the Google Cloud authentication documentation.

    Node.js

    To use the Node.js samples on this page in a local development environment, install and initialize the gcloud CLI, and then set up Application Default Credentials with your user credentials.

    1. Install the Google Cloud CLI.
    2. To initialize the gcloud CLI, run the following command:

      gcloud init
    3. If you're using a local shell, then create local authentication credentials for your user account:

      gcloud auth application-default login

      You don't need to do this if you're using Cloud Shell.

    For more information, see Set up authentication for a local development environment in the Google Cloud authentication documentation.

    Python

    To use the Python samples on this page in a local development environment, install and initialize the gcloud CLI, and then set up Application Default Credentials with your user credentials.

    1. Install the Google Cloud CLI.
    2. To initialize the gcloud CLI, run the following command:

      gcloud init
    3. If you're using a local shell, then create local authentication credentials for your user account:

      gcloud auth application-default login

      You don't need to do this if you're using Cloud Shell.

    For more information, see Set up authentication for a local development environment in the Google Cloud authentication documentation.

    REST

    To use the REST API samples on this page in a local development environment, you use the credentials you provide to the gcloud CLI.

      Install the Google Cloud CLI, then initialize it by running the following command:

      gcloud init

    For more information, see Authenticate for using REST in the Google Cloud authentication documentation.

  • Understand IAM service accounts.

  • Understand service account impersonation.

  • Understand what kind of token you need, and use the appropriate steps provided in the sections below:

Create a short-lived access token

Access tokens are accepted for authentication by most Google APIs. When you generate an access token by using service account impersonation, the access token comes without a refresh token, which means that when the token expires, you must repeat the impersonation process to generate a new one.

For more information, see Access tokens.

To create a short-lived access token, complete these tasks:

Provide required permissions

A direct request involves two identities: the caller that requests the credential, and the service account for which the credential is created. How you set up the permissions depends on whether the caller is authenticating as a service account or as a user account.

If you want to run a REST or gcloud CLI command on this page in a local development environment, the caller can be represented by user credentials. For automated workloads, such as an application running on Compute Engine, the caller must be represented by a service account.

Service account

When the calling application uses a service account as its identity, the following principals are involved:

  • Caller service account (CALLER_SA)

    This service account represents the calling application, which issues the request for the short-lived credentials.

  • Privilege-bearing service account (PRIV_SA)

    This service account is granted the IAM roles needed for the short-lived token. This is the service account for which the short-lived token is created.

To give CALLER_SA permissions to create short-lived credentials for PRIV_SA, you grant CALLER_SA the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator) on PRIV_SA.

Grant the required role on PRIV_SA:

Console

  1. In the Google Cloud console, go to the Service Accounts page.

    Go to Service Accounts

  2. Select a project.
  3. Click the email address of the privilege-bearing service account, PRIV_SA.
  4. Click the Permissions tab.
  5. Under Principals with access to this service account, click Grant Access.
  6. Enter the email address of the caller service account, CALLER_SA.

    For example, demo@my-project.iam.gserviceaccount.com.

  7. Select the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).
  8. Click Save to grant the role to the service account.

gcloud

The gcloud iam service-accounts add-iam-policy-binding command grants a role on a service account.

Before using any of the command data below, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the token is generated.
  • CALLER_SA: The email address of the service account representing the application that is requesting the short-lived token.

Execute the following command:

Linux, macOS, or Cloud Shell

gcloud iam service-accounts add-iam-policy-binding PRIV_SA \
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (PowerShell)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA `
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (cmd.exe)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA ^
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

You should receive a response similar to the following:

Updated IAM policy for serviceAccount [PRIV_SA].
{
  "bindings": [
    {
      "members": [
        "serviceAccount:CALLER_SA"
      ],
      "role": "roles/iam.serviceAccountTokenCreator"
    }
  ],
  "etag": "BwXhCB4eyjY=",
  "version": 1
}

REST

  1. Read the allow policy for PRIV_SA:

    The serviceAccounts.getIamPolicy method gets a service account's allow policy.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA:getIamPolicy

    Request JSON body:

    {
      "options": {
        "requestedPolicyVersion": POLICY_VERSION
      }
    }
    

    To send your request, expand one of these options:

    You should receive a JSON response similar to the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    

    If you have not granted any roles on the service account, the response contains only an etag value. Include that etag value in the next step.

  2. Modify the allow policy to grant CALLER_SA the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).

    For example, to modify the sample response from the previous step, add the following:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "serviceAccount:CALLER_SA"
            ]
          }
        ]
      }
    
  3. Write the updated allow policy:

    The serviceAccounts.setIamPolicy method sets an updated allow policy for the service account.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.
    • POLICY: A JSON representation of the policy that you want to set. For more information about the format of a policy, see the Policy reference.

      For example, to set the allow policy shown in the previous step, replace POLICY with the following, where CALLER_SA is the service account creating the short-lived token:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "serviceAccount:CALLER_SA"
            ]
          }
        ]
      }
      

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA

    Request JSON body:

    {
      "policy": POLICY
    }
    

    To send your request, expand one of these options:

    The response contains the updated allow policy.

User credentials

When you want to use the Google Cloud CLI to generate short-lived tokens, or you want to generate short-lived tokens from a local development environment, you can use a user account to generate the tokens. Often, you can use your own user account.

When you use a user account to generate short-lived tokens, the following identities are involved:

  • Caller account (CALLER_ACCOUNT)

    This user account is used to generate short-lived credentials for the privilege-bearing service account.

  • Privilege-bearing service account (PRIV_SA)

    This service account is granted the IAM roles needed for the short-lived token. This is the service account for which the short-lived token is created.

To enable CALLER_ACCOUNT to create short-lived credentials for PRIV_SA, you grant CALLER_ACCOUNT the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator) on PRIV_SA.

Grant the required role on PRIV_SA:

Console

  1. In the Google Cloud console, go to the Service Accounts page.

    Go to Service Accounts

  2. Select a project.
  3. Click the email address of the privilege-bearing service account, PRIV_SA.
  4. Click the Permissions tab.
  5. Under Principals with access to this service account, click Grant Access.
  6. Enter the principal identifier of the caller account, CALLER_ACCOUNT.

    For example, example-user@example.com.

  7. Select the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).
  8. Click Save to grant the role to the user account.

gcloud

The gcloud iam service-accounts add-iam-policy-binding command grants a role on a service account.

Before using any of the command data below, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the token is generated.
  • CALLER_ACCOUNT: The email address of the user account being used to request the short-lived token.

Execute the following command:

Linux, macOS, or Cloud Shell

gcloud iam service-accounts add-iam-policy-binding PRIV_SA \
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (PowerShell)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA `
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (cmd.exe)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA ^
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

You should receive a response similar to the following:

Updated IAM policy for serviceAccount [PRIV_SA].
{
  "bindings": [
    {
      "members": [
        "user:my-user@example.com"
      ],
      "role": "roles/iam.serviceAccountTokenCreator"
    }
  ],
  "etag": "BwX1ZbefjXU=",
  "version": 1
}

REST

  1. Read the allow policy for PRIV_SA:

    The serviceAccounts.getIamPolicy method gets a service account's allow policy.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA:getIamPolicy

    Request JSON body:

    {
      "options": {
        "requestedPolicyVersion": POLICY_VERSION
      }
    }
    

    To send your request, expand one of these options:

    You should receive a JSON response similar to the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    

    If you have not granted any roles on the service account, the response contains only an etag value. Include that etag value in the next step.

  2. Modify the allow policy to grant CALLER_ACCOUNT the Service Account Token Creator role ( roles/iam.serviceAccountTokenCreator).

    For example, to modify the sample response from the previous step, add the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        },
        {
          "role": "roles/iam.serviceAccountTokenCreator",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    
  3. Write the updated allow policy:

    The serviceAccounts.setIamPolicy method sets an updated allow policy for the service account.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.
    • POLICY: A JSON representation of the policy that you want to set. For more information about the format of a policy, see the Policy reference.

      For example, to set the allow policy shown in the previous step, replace POLICY with the following, where CALLER_ACCOUNT is the user account creating the short-lived token:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "CALLER_ACCOUNT"
            ]
          }
        ]
      }
      

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA

    Request JSON body:

    {
      "policy": POLICY
    }
    

    To send your request, expand one of these options:

    The response contains the updated allow policy.

Generate the access token

You can generate an OAuth 2.0 access token by using the gcloud CLI, the REST API, or the Cloud Client Libraries and Google API Client Libraries.

If you use the REST API, and your system is configured to allow extended token lifetimes, you can create a token with a lifetime longer than the default. The Google Cloud CLI does not support setting a lifetime for the token.

The samples below are designed to be used in a local development environment; the caller must be represented by a user account, rather than a service account.

Generate an OAuth 2.0 access token for a service account:

gcloud

  1. Ensure that you are signed into the gcloud CLI with the caller user account.

  2. Generate a token for the service account by using the gcloud auth print-access-token command.

    Before using any of the command data below, make the following replacements:

    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.

    Execute the following command:

    Linux, macOS, or Cloud Shell

    gcloud auth print-access-token --impersonate-service-account=PRIV_SA
    

    Windows (PowerShell)

    gcloud auth print-access-token --impersonate-service-account=PRIV_SA
    

    Windows (cmd.exe)

    gcloud auth print-access-token --impersonate-service-account=PRIV_SA
    

    You should receive a response similar to the following:

    WARNING: This command is using service account impersonation. All API calls will be executed as
    [my-sa@my-project.iam.gserviceaccount.com].
    ya29.c.b0AXv0zTPnzTnDV8F8Aj5Fgy46Yf2v_v8eZIoKq7xGpfbpXuy23aQ1693m3gAuE8AZga7w6kdagN7a9bfdDYbdeoGY0CMHOClsCwIdutL7k_RFC672lOCbUgF5hS8Iu2nCA8hle-11LJXBLmaxFmH08ZTBJLuDrWSNd8cYqGYFunSC1K1qLIPBF18tsa0hxVgKPucI8b1A9L8_MK1JGLGcr0n7-zY77_lmbcdODG3NmIbLOGWOutjJgqSO_YoeCKK2QTUZIp5PG7RkKlXWnmYJA9pEahzNoQrs5sWZctc2bia9af_ITzqqlXC9h1Kj5-me6e8rd734MJvpagqYazRk0gGWpMb03XmMGpgPc_FBp4pnX9rGOzW83SNpcDz8zeFO1Q0Bo3N7CuZougjRce0y8I2_4rtw5ME_nV3wrCWa..................................................................................................................................................................................................................................................................................................
    

REST

The Service Account Credentials API's serviceAccounts.generateAccessToken method generates an OAuth 2.0 access token for a service account.

Before using any of the request data, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
  • LIFETIME: The amount of time until the access token expires, in seconds. For example, 300s.

    By default, the maximum token lifetime is 1 hour (3,600 seconds). To extend the maximum lifetime for these tokens to 12 hours (43,200 seconds), add the service account to an organization policy that includes the constraints/iam.allowServiceAccountCredentialLifetimeExtension list constraint.

HTTP method and URL:

POST https://iamcredentials.googleapis.com/v1/projects/-/serviceAccounts/PRIV_SA:generateAccessToken

Request JSON body:

{
  "scope": [
    "https://www.googleapis.com/auth/cloud-platform"
  ],
  "lifetime": "LIFETIME"
}

To send your request, expand one of these options:

If the generateAccessToken request was successful, the response body contains an OAuth 2.0 access token and an expiration time. The accessToken can then be used to authenticate a request on behalf of the service account until the expireTime has been reached:

{
  "accessToken": "eyJ0eXAi...NiJ9",
  "expireTime": "2020-04-07T15:01:23.045123456Z"
}

Go

import (
	"context"
	"fmt"
	"io"
	"time"

	"golang.org/x/oauth2/google"
	"google.golang.org/api/impersonate"
	"google.golang.org/api/option"
)

// getAccessTokenFromImpersonatedCredentials uses a service account (SA1) to impersonate
// another service account (SA2) and obtain OAuth2 token for the impersonated account.
// To obtain a token for SA2, SA1 should have the "roles/iam.serviceAccountTokenCreator" permission on SA2.
func getAccessTokenFromImpersonatedCredentials(w io.Writer, impersonatedServiceAccount, scope string) error {
	// impersonatedServiceAccount := "name@project.service.gserviceaccount.com"
	// scope := "https://www.googleapis.com/auth/cloud-platform"

	ctx := context.Background()

	// Construct the GoogleCredentials object which obtains the default configuration from your
	// working environment.
	credentials, err := google.FindDefaultCredentials(ctx, scope)
	if err != nil {
		fmt.Fprintf(w, "failed to generate default credentials: %v", err)
		return fmt.Errorf("failed to generate default credentials: %w", err)
	}

	ts, err := impersonate.CredentialsTokenSource(ctx, impersonate.CredentialsConfig{
		TargetPrincipal: impersonatedServiceAccount,
		Scopes:          []string{scope},
		Lifetime:        300 * time.Second,
		// delegates: The chained list of delegates required to grant the final accessToken.
		// For more information, see:
		// https://cloud.google.com/iam/docs/create-short-lived-credentials-direct#sa-credentials-permissions
		// Delegates is NOT USED here.
		Delegates: []string{},
	}, option.WithCredentials(credentials))
	if err != nil {
		fmt.Fprintf(w, "CredentialsTokenSource error: %v", err)
		return fmt.Errorf("CredentialsTokenSource error: %w", err)
	}

	// Get the OAuth2 token.
	// Once you've obtained the OAuth2 token, you can use it to make an authenticated call.
	t, err := ts.Token()
	if err != nil {
		fmt.Fprintf(w, "failed to receive token: %v", err)
		return fmt.Errorf("failed to receive token: %w", err)
	}
	fmt.Fprintf(w, "Generated OAuth2 token with length %d.\n", len(t.AccessToken))

	return nil
}

Java


package com.google.cloud.auth.samples;

import com.google.auth.oauth2.GoogleCredentials;
import com.google.auth.oauth2.ImpersonatedCredentials;
import java.io.IOException;
import java.util.Arrays;
import java.util.List;

public class AccessTokenFromImpersonatedCredentials {

  public static void main(String[] args) throws IOException {
    // TODO(Developer): Replace the below variables before running the code.

    // Provide the scopes that you might need to request access to Google APIs,
    // depending on the level of access you need.
    // This example uses the cloud-wide scope and uses IAM to narrow the permissions.
    // https://cloud.google.com/docs/authentication/external/authorization-gcp
    // For more information, see: https://developers.google.com/identity/protocols/oauth2/scopes
    String scope = "https://www.googleapis.com/auth/cloud-platform";

    // The name of the privilege-bearing service account for whom the credential is created.
    String impersonatedServiceAccount = "name@project.service.gserviceaccount.com";

    getAccessToken(impersonatedServiceAccount, scope);
  }

  // Use a service account (SA1) to impersonate another service account (SA2) and obtain an ID token
  // for the impersonated account.
  // To obtain a token for SA2, SA1 should have the "roles/iam.serviceAccountTokenCreator"
  // permission on SA2.
  public static void getAccessToken(
      String impersonatedServiceAccount, String scope) throws IOException {

    // Construct the GoogleCredentials object which obtains the default configuration from your
    // working environment.
    GoogleCredentials googleCredentials = GoogleCredentials.getApplicationDefault();

    // delegates: The chained list of delegates required to grant the final accessToken.
    // For more information, see:
    // https://cloud.google.com/iam/docs/create-short-lived-credentials-direct#sa-credentials-permissions
    // Delegate is NOT USED here.
    List<String> delegates = null;

    // Create the impersonated credential.
    ImpersonatedCredentials impersonatedCredentials =
        ImpersonatedCredentials.newBuilder()
            .setSourceCredentials(googleCredentials)
            .setTargetPrincipal(impersonatedServiceAccount)
            .setScopes(Arrays.asList(scope))
            .setLifetime(300)
            .setDelegates(delegates)
            .build();

    // Get the OAuth2 token.
    // Once you've obtained the OAuth2 token, you can use it to make an authenticated call.
    impersonatedCredentials.refresh();
    String accessToken = impersonatedCredentials.getAccessToken().getTokenValue();
    System.out.println("Generated access token.");
  }
}

Node.js

/**
 * TODO(developer):
 *  Uncomment and replace these variables before running the sample.
 */
// const impersonatedServiceAccount = 'name@project.service.gserviceaccount.com';
// const scope = 'https://www.googleapis.com/auth/cloud-platform';

const {GoogleAuth, Impersonated} = require('google-auth-library');

async function getAccessTokenFromImpersonatedCredentials() {
  const googleAuth = new GoogleAuth({
    scopes: scope,
  });
  // Construct the GoogleCredentials object which obtains the default configuration from your
  // working environment.
  const {credential} = await googleAuth.getApplicationDefault();

  // delegates: The chained list of delegates required to grant the final accessToken.
  // For more information, see:
  // https://cloud.google.com/iam/docs/create-short-lived-credentials-direct#sa-credentials-permissions
  // Delegate is NOT USED here.
  const delegates = [];

  // Create the impersonated credential.
  const impersonatedCredentials = new Impersonated({
    sourceClient: credential,
    delegates,
    targetPrincipal: impersonatedServiceAccount,
    targetScopes: [scope],
    lifetime: 300,
  });

  // Get the OAuth2 token.
  // Once you've obtained the OAuth2 token, you can use it to make an authenticated call
  // to the target audience.
  const resp = await impersonatedCredentials.getAccessToken();
  // Token is in resp.token.
  console.log('Generated OAuth2 token with length %s', resp.token.length);
}

getAccessTokenFromImpersonatedCredentials();

Python

def accesstoken_from_impersonated_credentials(
    impersonated_service_account: str, scope: str
):
    from google.auth import impersonated_credentials
    import google.auth.transport.requests

    """
      Use a service account (SA1) to impersonate another service account (SA2)
      and obtain an ID token for the impersonated account.
      To obtain a token for SA2, SA1 should have the
      "roles/iam.serviceAccountTokenCreator" permission on SA2.

    Args:
        impersonated_service_account: The name of the privilege-bearing service account for whom the credential is created.
            Examples: name@project.service.gserviceaccount.com

        scope: Provide the scopes that you might need to request to access Google APIs,
            depending on the level of access you need.
            For this example, we use the cloud-wide scope and use IAM to narrow the permissions.
            https://cloud.google.com/docs/authentication#authorization_for_services
            For more information, see: https://developers.google.com/identity/protocols/oauth2/scopes
    """

    # Construct the GoogleCredentials object which obtains the default configuration from your
    # working environment.
    credentials, project_id = google.auth.default()

    # Create the impersonated credential.
    target_credentials = impersonated_credentials.Credentials(
        source_credentials=credentials,
        target_principal=impersonated_service_account,
        # delegates: The chained list of delegates required to grant the final accessToken.
        # For more information, see:
        # https://cloud.google.com/iam/docs/create-short-lived-credentials-direct#sa-credentials-permissions
        # Delegate is NOT USED here.
        delegates=[],
        target_scopes=[scope],
        lifetime=300,
    )

    # Get the OAuth2 token.
    # Once you've obtained the OAuth2 token, use it to make an authenticated call
    # to the target audience.
    request = google.auth.transport.requests.Request()
    target_credentials.refresh(request)
    # The token field is target_credentials.token.
    print("Generated OAuth2 token.")

Create an OpenID Connect (OIDC) ID token

ID tokens follow the OpenID Connect (OIDC) specification. ID tokens are accepted by a limited number of services and applications.

For more information, see ID tokens and Authentication for applications hosted on Cloud Run or Cloud Run functions.

To create an ID token, complete these tasks:

Provide required permissions

A direct request involves two identities: the caller that requests the credential, and the service account for which the credential is created. How you set up the permissions depends on whether the caller is authenticating as a service account or as a user account.

If you want to run a REST or gcloud CLI command on this page in a local development environment, the caller can be represented by user credentials. For automated workloads, such as an application running on Compute Engine, the caller must be represented by a service account.

Service account

When the calling application uses a service account as its identity, the following principals are involved:

  • Caller service account (CALLER_SA)

    This service account represents the calling application, which issues the request for the short-lived credentials.

  • Privilege-bearing service account (PRIV_SA)

    This service account is granted the IAM roles needed for the short-lived token. This is the service account for which the short-lived token is created.

To give CALLER_SA permissions to create short-lived credentials for PRIV_SA, you grant CALLER_SA the Service Account OpenID Connect Identity Token Creator role (roles/iam.serviceAccountOpenIdTokenCreator) on PRIV_SA.

Grant the required role on PRIV_SA:

Console

  1. In the Google Cloud console, go to the Service Accounts page.

    Go to Service Accounts

  2. Select a project.
  3. Click the email address of the privilege-bearing service account, PRIV_SA.
  4. Click the Permissions tab.
  5. Under Principals with access to this service account, click Grant Access.
  6. Enter the email address of the caller service account, CALLER_SA.

    For example, demo@my-project.iam.gserviceaccount.com.

  7. Select the Service Account OpenID Connect Identity Token Creator role (roles/iam.serviceAccountOpenIdTokenCreator).
  8. Click Save to grant the role to the service account.

gcloud

The gcloud iam service-accounts add-iam-policy-binding command grants a role on a service account.

Before using any of the command data below, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the token is generated.
  • CALLER_SA: The email address of the service account representing the application that is requesting the short-lived token.

Execute the following command:

Linux, macOS, or Cloud Shell

gcloud iam service-accounts add-iam-policy-binding PRIV_SA \
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountOpenIdTokenCreator --format=json

Windows (PowerShell)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA `
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountOpenIdTokenCreator --format=json

Windows (cmd.exe)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA ^
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountOpenIdTokenCreator --format=json

You should receive a response similar to the following:

Updated IAM policy for serviceAccount [PRIV_SA].
{
  "bindings": [
    {
      "members": [
        "serviceAccount:CALLER_SA"
      ],
      "role": "roles/iam.serviceAccountOpenIdTokenCreator"
    }
  ],
  "etag": "BwXhCB4eyjY=",
  "version": 1
}

REST

  1. Read the allow policy for PRIV_SA:

    The serviceAccounts.getIamPolicy method gets a service account's allow policy.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA:getIamPolicy

    Request JSON body:

    {
      "options": {
        "requestedPolicyVersion": POLICY_VERSION
      }
    }
    

    To send your request, expand one of these options:

    You should receive a JSON response similar to the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    

    If you have not granted any roles on the service account, the response contains only an etag value. Include that etag value in the next step.

  2. Modify the allow policy to grant CALLER_SA the Service Account OpenID Connect Identity Token Creator role (roles/iam.serviceAccountOpenIdTokenCreator).

    For example, to modify the sample response from the previous step, add the following:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountOpenIdTokenCreator",
            "members": [
              "serviceAccount:CALLER_SA"
            ]
          }
        ]
      }
    
  3. Write the updated allow policy:

    The serviceAccounts.setIamPolicy method sets an updated allow policy for the service account.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.
    • POLICY: A JSON representation of the policy that you want to set. For more information about the format of a policy, see the Policy reference.

      For example, to set the allow policy shown in the previous step, replace POLICY with the following, where CALLER_SA is the service account creating the short-lived token:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountOpenIdTokenCreator",
            "members": [
              "serviceAccount:CALLER_SA"
            ]
          }
        ]
      }
      

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA

    Request JSON body:

    {
      "policy": POLICY
    }
    

    To send your request, expand one of these options:

    The response contains the updated allow policy.

User credentials

When you want to use the Google Cloud CLI to generate short-lived tokens, or you want to generate short-lived tokens from a local development environment, you can use a user account to generate the tokens. Often, you can use your own user account.

When you use a user account to generate short-lived tokens, the following identities are involved:

  • Caller account (CALLER_ACCOUNT)

    This user account is used to generate short-lived credentials for the privilege-bearing service account.

  • Privilege-bearing service account (PRIV_SA)

    This service account is granted the IAM roles needed for the short-lived token. This is the service account for which the short-lived token is created.

To enable CALLER_ACCOUNT to create short-lived credentials for PRIV_SA, you grant CALLER_ACCOUNT the Service Account OpenID Connect Identity Token Creator role (roles/iam.serviceAccountOpenIdTokenCreator) on PRIV_SA.

Grant the required role on PRIV_SA:

Console

  1. In the Google Cloud console, go to the Service Accounts page.

    Go to Service Accounts

  2. Select a project.
  3. Click the email address of the privilege-bearing service account, PRIV_SA.
  4. Click the Permissions tab.
  5. Under Principals with access to this service account, click Grant Access.
  6. Enter the principal identifier of the caller account, CALLER_ACCOUNT.

    For example, example-user@example.com.

  7. Select the Service Account OpenID Connect Identity Token Creator role (roles/iam.serviceAccountOpenIdTokenCreator).
  8. Click Save to grant the role to the user account.

gcloud

The gcloud iam service-accounts add-iam-policy-binding command grants a role on a service account.

Before using any of the command data below, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the token is generated.
  • CALLER_ACCOUNT: The email address of the user account being used to request the short-lived token.

Execute the following command:

Linux, macOS, or Cloud Shell

gcloud iam service-accounts add-iam-policy-binding PRIV_SA \
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountOpenIdTokenCreator --format=json

Windows (PowerShell)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA `
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountOpenIdTokenCreator --format=json

Windows (cmd.exe)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA ^
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountOpenIdTokenCreator --format=json

You should receive a response similar to the following:

Updated IAM policy for serviceAccount [PRIV_SA].
{
  "bindings": [
    {
      "members": [
        "user:my-user@example.com"
      ],
      "role": "roles/iam.serviceAccountOpenIdTokenCreator"
    }
  ],
  "etag": "BwX1ZbefjXU=",
  "version": 1
}

REST

  1. Read the allow policy for PRIV_SA:

    The serviceAccounts.getIamPolicy method gets a service account's allow policy.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA:getIamPolicy

    Request JSON body:

    {
      "options": {
        "requestedPolicyVersion": POLICY_VERSION
      }
    }
    

    To send your request, expand one of these options:

    You should receive a JSON response similar to the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    

    If you have not granted any roles on the service account, the response contains only an etag value. Include that etag value in the next step.

  2. Modify the allow policy to grant CALLER_ACCOUNT the Service Account OpenID Connect Identity Token Creator role ( roles/iam.serviceAccountOpenIdTokenCreator).

    For example, to modify the sample response from the previous step, add the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        },
        {
          "role": "roles/iam.serviceAccountOpenIdTokenCreator",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    
  3. Write the updated allow policy:

    The serviceAccounts.setIamPolicy method sets an updated allow policy for the service account.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.
    • POLICY: A JSON representation of the policy that you want to set. For more information about the format of a policy, see the Policy reference.

      For example, to set the allow policy shown in the previous step, replace POLICY with the following, where CALLER_ACCOUNT is the user account creating the short-lived token:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountOpenIdTokenCreator",
            "members": [
              "CALLER_ACCOUNT"
            ]
          }
        ]
      }
      

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA

    Request JSON body:

    {
      "policy": POLICY
    }
    

    To send your request, expand one of these options:

    The response contains the updated allow policy.

Generate the ID token

You can generate an OpenID Connect (OIDC) ID token by using the gcloud CLI, the REST API, or the Cloud Client Libraries and Google API Client Libraries.

The samples below are designed to be used in a local development environment; the caller must be represented by a user account, rather than a service account.

OIDC ID tokens are valid for 1 hour (3,600 seconds).

Generate a Google-signed OIDC ID token for a service account:

gcloud

  1. Ensure that you are signed into the gcloud CLI with the caller user account.

  2. Generate a token for the service account by using the gcloud auth print-identity-token command.

    Before using any of the command data below, make the following replacements:

    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • AUDIENCE_NAME: The audience for the token, usually the URL of the application or service that the token will be used to access.
      • Execute the following command:

        Linux, macOS, or Cloud Shell

        gcloud auth print-identity-token --impersonate-service-account=PRIV_SA --audiences="AUDIENCE_NAME"
        

        Windows (PowerShell)

        gcloud auth print-identity-token --impersonate-service-account=PRIV_SA --audiences="AUDIENCE_NAME"
        

        Windows (cmd.exe)

        gcloud auth print-identity-token --impersonate-service-account=PRIV_SA --audiences="AUDIENCE_NAME"
        

        You should receive a response similar to the following:

        WARNING: This command is using service account impersonation. All API calls will be executed as
        [my-sa@my-project.iam.gserviceaccount.com].
        eyJhbGciOiJSUzI1NiIsImtpZDNhMDg4ZDRmZmMjJkYTVmZTM5MDZjY2MiLCJ0eXAiOiJKV1QifQ.eyJhdWQiOiJ3d3cuZXhhbXBsJhenAiOiIxMTYzwNDYyMDk0ODIiLCJleHAiOjE2NTQ4ODU0MzEsImlhdCI6MTY1NDg4MTgzMSwiaXN6Ly9hY2NvdW50cy5nb29nbGUuY29tIiwic3ViIMDQ2MjA5NDgyIn0.F7mu8IHj5VQdu7ItFrnYAKyGd7YqXuOP_rFLc98q8BaFBycAF1zAQnSnwqnSUXba0UK9PDT_-IOry68qLwBObz4XlX9lk0ehpN0O0W9FcFToKLB6wefXXPd4h7xtuPe5KzmpSOqj2Qqv34HriGw00Nqd-oGSgNY_lZ4wGEf4rT4oQa_kEcrY57Q2G6pwd769BhgeFwoLi5aK_Cv2kvf_zfMszC-xlkP9zwWQ8XinJBwe-qcQBa4NTgrbueNtXsEjccBS366zmw
        

REST

The Service Account Credentials API's serviceAccounts.generateIdToken method generates an OIDC ID token for a service account.

Before using any of the request data, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
  • AUDIENCE_NAME: The audience for the token, usually the URL of the application or service that the token will be used to access.

HTTP method and URL:

POST https://iamcredentials.googleapis.com/v1/projects/-/serviceAccounts/PRIV_SA:generateIdToken

Request JSON body:

{
  "audience": "AUDIENCE_NAME",
  "includeEmail": "true"
}

To send your request, expand one of these options:

If the generateId request was successful, the response body contains an ID token that is valid for 1 hour. The token can then be used to authenticate a request on behalf of the service account:

{
  "token": "eyJ0eXAi...NiJ9"
}

Create a self-signed JSON Web Token (JWT)

Self-signed JSON Web Tokens (JWTs) are useful in a variety of scenarios:

  • Securely communicating between your own applications. In this scenario, one application can sign a token that can be verified by another application for authentication purposes.
  • Authenticating a call to a Google API as described in Service account authorization without OAuth.
  • Authenticating to an API deployed with API Gateway.
  • Treating a service account as an identity provider by signing a JWT that contains arbitrary claims about a user, account, or device.

To create a JWT, complete these tasks:

Provide required permissions

A direct request involves two identities: the caller that requests the credential, and the service account for which the credential is created. How you set up the permissions depends on whether the caller is authenticating as a service account or as a user account.

If you want to run a REST or gcloud CLI command on this page in a local development environment, the caller can be represented by user credentials. For automated workloads, such as an application running on Compute Engine, the caller must be represented by a service account.

Service account

When the calling application uses a service account as its identity, the following principals are involved:

  • Caller service account (CALLER_SA)

    This service account represents the calling application, which issues the request for the short-lived credentials.

  • Privilege-bearing service account (PRIV_SA)

    This service account is granted the IAM roles needed for the short-lived token. This is the service account for which the short-lived token is created.

To give CALLER_SA permissions to create short-lived credentials for PRIV_SA, you grant CALLER_SA the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator) on PRIV_SA.

Grant the required role on PRIV_SA:

Console

  1. In the Google Cloud console, go to the Service Accounts page.

    Go to Service Accounts

  2. Select a project.
  3. Click the email address of the privilege-bearing service account, PRIV_SA.
  4. Click the Permissions tab.
  5. Under Principals with access to this service account, click Grant Access.
  6. Enter the email address of the caller service account, CALLER_SA.

    For example, demo@my-project.iam.gserviceaccount.com.

  7. Select the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).
  8. Click Save to grant the role to the service account.

gcloud

The gcloud iam service-accounts add-iam-policy-binding command grants a role on a service account.

Before using any of the command data below, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the token is generated.
  • CALLER_SA: The email address of the service account representing the application that is requesting the short-lived token.

Execute the following command:

Linux, macOS, or Cloud Shell

gcloud iam service-accounts add-iam-policy-binding PRIV_SA \
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (PowerShell)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA `
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (cmd.exe)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA ^
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

You should receive a response similar to the following:

Updated IAM policy for serviceAccount [PRIV_SA].
{
  "bindings": [
    {
      "members": [
        "serviceAccount:CALLER_SA"
      ],
      "role": "roles/iam.serviceAccountTokenCreator"
    }
  ],
  "etag": "BwXhCB4eyjY=",
  "version": 1
}

REST

  1. Read the allow policy for PRIV_SA:

    The serviceAccounts.getIamPolicy method gets a service account's allow policy.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA:getIamPolicy

    Request JSON body:

    {
      "options": {
        "requestedPolicyVersion": POLICY_VERSION
      }
    }
    

    To send your request, expand one of these options:

    You should receive a JSON response similar to the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    

    If you have not granted any roles on the service account, the response contains only an etag value. Include that etag value in the next step.

  2. Modify the allow policy to grant CALLER_SA the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).

    For example, to modify the sample response from the previous step, add the following:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "serviceAccount:CALLER_SA"
            ]
          }
        ]
      }
    
  3. Write the updated allow policy:

    The serviceAccounts.setIamPolicy method sets an updated allow policy for the service account.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.
    • POLICY: A JSON representation of the policy that you want to set. For more information about the format of a policy, see the Policy reference.

      For example, to set the allow policy shown in the previous step, replace POLICY with the following, where CALLER_SA is the service account creating the short-lived token:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "serviceAccount:CALLER_SA"
            ]
          }
        ]
      }
      

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA

    Request JSON body:

    {
      "policy": POLICY
    }
    

    To send your request, expand one of these options:

    The response contains the updated allow policy.

User credentials

When you want to use the Google Cloud CLI to generate short-lived tokens, or you want to generate short-lived tokens from a local development environment, you can use a user account to generate the tokens. Often, you can use your own user account.

When you use a user account to generate short-lived tokens, the following identities are involved:

  • Caller account (CALLER_ACCOUNT)

    This user account is used to generate short-lived credentials for the privilege-bearing service account.

  • Privilege-bearing service account (PRIV_SA)

    This service account is granted the IAM roles needed for the short-lived token. This is the service account for which the short-lived token is created.

To enable CALLER_ACCOUNT to create short-lived credentials for PRIV_SA, you grant CALLER_ACCOUNT the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator) on PRIV_SA.

Grant the required role on PRIV_SA:

Console

  1. In the Google Cloud console, go to the Service Accounts page.

    Go to Service Accounts

  2. Select a project.
  3. Click the email address of the privilege-bearing service account, PRIV_SA.
  4. Click the Permissions tab.
  5. Under Principals with access to this service account, click Grant Access.
  6. Enter the principal identifier of the caller account, CALLER_ACCOUNT.

    For example, example-user@example.com.

  7. Select the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).
  8. Click Save to grant the role to the user account.

gcloud

The gcloud iam service-accounts add-iam-policy-binding command grants a role on a service account.

Before using any of the command data below, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the token is generated.
  • CALLER_ACCOUNT: The email address of the user account being used to request the short-lived token.

Execute the following command:

Linux, macOS, or Cloud Shell

gcloud iam service-accounts add-iam-policy-binding PRIV_SA \
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (PowerShell)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA `
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (cmd.exe)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA ^
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

You should receive a response similar to the following:

Updated IAM policy for serviceAccount [PRIV_SA].
{
  "bindings": [
    {
      "members": [
        "user:my-user@example.com"
      ],
      "role": "roles/iam.serviceAccountTokenCreator"
    }
  ],
  "etag": "BwX1ZbefjXU=",
  "version": 1
}

REST

  1. Read the allow policy for PRIV_SA:

    The serviceAccounts.getIamPolicy method gets a service account's allow policy.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA:getIamPolicy

    Request JSON body:

    {
      "options": {
        "requestedPolicyVersion": POLICY_VERSION
      }
    }
    

    To send your request, expand one of these options:

    You should receive a JSON response similar to the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    

    If you have not granted any roles on the service account, the response contains only an etag value. Include that etag value in the next step.

  2. Modify the allow policy to grant CALLER_ACCOUNT the Service Account Token Creator role ( roles/iam.serviceAccountTokenCreator).

    For example, to modify the sample response from the previous step, add the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        },
        {
          "role": "roles/iam.serviceAccountTokenCreator",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    
  3. Write the updated allow policy:

    The serviceAccounts.setIamPolicy method sets an updated allow policy for the service account.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.
    • POLICY: A JSON representation of the policy that you want to set. For more information about the format of a policy, see the Policy reference.

      For example, to set the allow policy shown in the previous step, replace POLICY with the following, where CALLER_ACCOUNT is the user account creating the short-lived token:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "CALLER_ACCOUNT"
            ]
          }
        ]
      }
      

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA

    Request JSON body:

    {
      "policy": POLICY
    }
    

    To send your request, expand one of these options:

    The response contains the updated allow policy.

Generate the JWT

Generate a self-signed JWT:

REST

The Service Account Credentials API's serviceAccounts.signJwt method signs a JWT using a service account's system-managed private key.

Before using any of the request data, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
  • JWT_PAYLOAD: The JWT payload to sign, which is a JSON object that contains a JWT Claims Set. Include the claims that are necessary for your desired use case and to meet the validation requirements for the service you are calling. If you are calling a Google API, see Google's Authentication Guide for claim requirements.

    The exp (expiration time) claim must be no more than 12 hours in the future. If you are calling a Google API, the exp claim must be set no more than 1 hour in the future.

    The following example payload contains claims to call a Google API, where EXP is an integer timestamp representing the expiration time:

    { \"iss\": \"PRIV_SA\", \"sub\": \"PRIV_SA\", \"aud\": \"https://firestore.googleapis.com/\", \"iat\": 1529350000, \"exp\": EXP }

HTTP method and URL:

POST https://iamcredentials.googleapis.com/v1/projects/-/serviceAccounts/PRIV_SA:signJwt

Request JSON body:

{
  "payload": "JWT_PAYLOAD"
}

To send your request, expand one of these options:

If the signJwt request was successful, the response body contains a signed JWT and the signing key ID that was used to sign the JWT. You can use the signedJwt value as a bearer token to directly authenticate a request on behalf of the service account. The token is valid up to the expiration time specified in the request:

{
  "keyId": "42ba1e...fc0a",
  "signedJwt": "eyJ0eXAi...NiJ9"
}

Create a self-signed binary object (blob)

Self-signed binary objects, or blobs, are used to transmit binary data in such a way that the originator of the data is known (because the blob is self-signed). Blobs can be used to create signatures, a Cloud Storage object required for various authentication flows including signed URLs. For information about signatures, see the Cloud Storage documentation.

To create a self-signed binary object, complete these tasks:

Provide required permissions

A direct request involves two identities: the caller that requests the credential, and the service account for which the credential is created. How you set up the permissions depends on whether the caller is authenticating as a service account or as a user account.

If you want to run a REST or gcloud CLI command on this page in a local development environment, the caller can be represented by user credentials. For automated workloads, such as an application running on Compute Engine, the caller must be represented by a service account.

Service account

When the calling application uses a service account as its identity, the following principals are involved:

  • Caller service account (CALLER_SA)

    This service account represents the calling application, which issues the request for the short-lived credentials.

  • Privilege-bearing service account (PRIV_SA)

    This service account is granted the IAM roles needed for the short-lived token. This is the service account for which the short-lived token is created.

To give CALLER_SA permissions to create short-lived credentials for PRIV_SA, you grant CALLER_SA the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator) on PRIV_SA.

Grant the required role on PRIV_SA:

Console

  1. In the Google Cloud console, go to the Service Accounts page.

    Go to Service Accounts

  2. Select a project.
  3. Click the email address of the privilege-bearing service account, PRIV_SA.
  4. Click the Permissions tab.
  5. Under Principals with access to this service account, click Grant Access.
  6. Enter the email address of the caller service account, CALLER_SA.

    For example, demo@my-project.iam.gserviceaccount.com.

  7. Select the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).
  8. Click Save to grant the role to the service account.

gcloud

The gcloud iam service-accounts add-iam-policy-binding command grants a role on a service account.

Before using any of the command data below, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the token is generated.
  • CALLER_SA: The email address of the service account representing the application that is requesting the short-lived token.

Execute the following command:

Linux, macOS, or Cloud Shell

gcloud iam service-accounts add-iam-policy-binding PRIV_SA \
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (PowerShell)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA `
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (cmd.exe)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA ^
    --member=serviceAccount:CALLER_SA --role=roles/iam.serviceAccountTokenCreator --format=json

You should receive a response similar to the following:

Updated IAM policy for serviceAccount [PRIV_SA].
{
  "bindings": [
    {
      "members": [
        "serviceAccount:CALLER_SA"
      ],
      "role": "roles/iam.serviceAccountTokenCreator"
    }
  ],
  "etag": "BwXhCB4eyjY=",
  "version": 1
}

REST

  1. Read the allow policy for PRIV_SA:

    The serviceAccounts.getIamPolicy method gets a service account's allow policy.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA:getIamPolicy

    Request JSON body:

    {
      "options": {
        "requestedPolicyVersion": POLICY_VERSION
      }
    }
    

    To send your request, expand one of these options:

    You should receive a JSON response similar to the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    

    If you have not granted any roles on the service account, the response contains only an etag value. Include that etag value in the next step.

  2. Modify the allow policy to grant CALLER_SA the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).

    For example, to modify the sample response from the previous step, add the following:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "serviceAccount:CALLER_SA"
            ]
          }
        ]
      }
    
  3. Write the updated allow policy:

    The serviceAccounts.setIamPolicy method sets an updated allow policy for the service account.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.
    • POLICY: A JSON representation of the policy that you want to set. For more information about the format of a policy, see the Policy reference.

      For example, to set the allow policy shown in the previous step, replace POLICY with the following, where CALLER_SA is the service account creating the short-lived token:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "serviceAccount:CALLER_SA"
            ]
          }
        ]
      }
      

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA

    Request JSON body:

    {
      "policy": POLICY
    }
    

    To send your request, expand one of these options:

    The response contains the updated allow policy.

User credentials

When you want to use the Google Cloud CLI to generate short-lived tokens, or you want to generate short-lived tokens from a local development environment, you can use a user account to generate the tokens. Often, you can use your own user account.

When you use a user account to generate short-lived tokens, the following identities are involved:

  • Caller account (CALLER_ACCOUNT)

    This user account is used to generate short-lived credentials for the privilege-bearing service account.

  • Privilege-bearing service account (PRIV_SA)

    This service account is granted the IAM roles needed for the short-lived token. This is the service account for which the short-lived token is created.

To enable CALLER_ACCOUNT to create short-lived credentials for PRIV_SA, you grant CALLER_ACCOUNT the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator) on PRIV_SA.

Grant the required role on PRIV_SA:

Console

  1. In the Google Cloud console, go to the Service Accounts page.

    Go to Service Accounts

  2. Select a project.
  3. Click the email address of the privilege-bearing service account, PRIV_SA.
  4. Click the Permissions tab.
  5. Under Principals with access to this service account, click Grant Access.
  6. Enter the principal identifier of the caller account, CALLER_ACCOUNT.

    For example, example-user@example.com.

  7. Select the Service Account Token Creator role (roles/iam.serviceAccountTokenCreator).
  8. Click Save to grant the role to the user account.

gcloud

The gcloud iam service-accounts add-iam-policy-binding command grants a role on a service account.

Before using any of the command data below, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the token is generated.
  • CALLER_ACCOUNT: The email address of the user account being used to request the short-lived token.

Execute the following command:

Linux, macOS, or Cloud Shell

gcloud iam service-accounts add-iam-policy-binding PRIV_SA \
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (PowerShell)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA `
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

Windows (cmd.exe)

gcloud iam service-accounts add-iam-policy-binding PRIV_SA ^
    --member=user:CALLER_ACCOUNT --role=roles/iam.serviceAccountTokenCreator --format=json

You should receive a response similar to the following:

Updated IAM policy for serviceAccount [PRIV_SA].
{
  "bindings": [
    {
      "members": [
        "user:my-user@example.com"
      ],
      "role": "roles/iam.serviceAccountTokenCreator"
    }
  ],
  "etag": "BwX1ZbefjXU=",
  "version": 1
}

REST

  1. Read the allow policy for PRIV_SA:

    The serviceAccounts.getIamPolicy method gets a service account's allow policy.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA:getIamPolicy

    Request JSON body:

    {
      "options": {
        "requestedPolicyVersion": POLICY_VERSION
      }
    }
    

    To send your request, expand one of these options:

    You should receive a JSON response similar to the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    

    If you have not granted any roles on the service account, the response contains only an etag value. Include that etag value in the next step.

  2. Modify the allow policy to grant CALLER_ACCOUNT the Service Account Token Creator role ( roles/iam.serviceAccountTokenCreator).

    For example, to modify the sample response from the previous step, add the following:

    {
      "version": 1,
      "etag": "BwWKmjvelug=",
      "bindings": [
        {
          "role": "roles/serviceAccountAdmin",
          "members": [
            "user:my-user@example.com"
          ]
        },
        {
          "role": "roles/iam.serviceAccountTokenCreator",
          "members": [
            "user:my-user@example.com"
          ]
        }
      ]
    }
    
  3. Write the updated allow policy:

    The serviceAccounts.setIamPolicy method sets an updated allow policy for the service account.

    Before using any of the request data, make the following replacements:

    • PROJECT_ID: Your Google Cloud project ID. Project IDs are alphanumeric strings, like my-project.
    • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
    • POLICY_VERSION: The policy version to be returned. Requests should specify the most recent policy version, which is policy version 3. See Specifying a policy version when getting a policy for details.
    • POLICY: A JSON representation of the policy that you want to set. For more information about the format of a policy, see the Policy reference.

      For example, to set the allow policy shown in the previous step, replace POLICY with the following, where CALLER_ACCOUNT is the user account creating the short-lived token:

      {
        "version": 1,
        "etag": "BwWKmjvelug=",
        "bindings": [
          {
            "role": "roles/serviceAccountAdmin",
            "members": [
              "user:my-user@example.com"
            ]
          },
          {
            "role": "roles/iam.serviceAccountTokenCreator",
            "members": [
              "CALLER_ACCOUNT"
            ]
          }
        ]
      }
      

    HTTP method and URL:

    POST https://iam.googleapis.com/v1/projects/PROJECT_ID/serviceAccounts/PRIV_SA

    Request JSON body:

    {
      "policy": POLICY
    }
    

    To send your request, expand one of these options:

    The response contains the updated allow policy.

Generate the self-signed blob

Generate a self-signed blob for the service account:

REST

The Service Account Credentials API's serviceAccounts.signBlob method signs a blob using a service account's system-managed private key.

Before using any of the request data, make the following replacements:

  • PRIV_SA: The email address of the privilege-bearing service account for which the short-lived token is created.
  • BLOB_PAYLOAD: A base64-encoded string of bytes. For example, VGhlIHF1aWNrIGJyb3duIGZveCBqdW1wZWQgb3ZlciB0aGUgbGF6eSBkb2cu.

HTTP method and URL:

POST https://iamcredentials.googleapis.com/v1/projects/-/serviceAccounts/PRIV_SA:signBlob

Request JSON body:

{
  "payload": "BLOB_PAYLOAD"
}

To send your request, expand one of these options:

If the signBlob request was successful, the response body contains a signed blob and the signing key ID that was used to sign the blob. You can use the signedBlob value as a bearer token to directly authenticate a request on behalf of the service account. The token is valid until the service account's system-managed private key expires. This key's ID is the value of the keyId field in the response.

{
  "keyId": "42ba1e...fc0a",
  "signedBlob": "eyJ0eXAi...NiJ9"
}