gcloud compute network-endpoint-groups create

NAME
gcloud compute network-endpoint-groups create - create a Compute Engine network endpoint group
SYNOPSIS
gcloud compute network-endpoint-groups create NAME [--default-port=DEFAULT_PORT] [--network=NETWORK] [--network-endpoint-type=NETWORK_ENDPOINT_TYPE; default="gce-vm-ip-port"] [--producer-port=PRODUCER_PORT] [--psc-target-service=PSC_TARGET_SERVICE] [--subnet=SUBNET] [--cloud-function-name=CLOUD_FUNCTION_NAME --cloud-function-url-mask=CLOUD_FUNCTION_URL_MASK     | --cloud-run-service=CLOUD_RUN_SERVICE --cloud-run-tag=CLOUD_RUN_TAG --cloud-run-url-mask=CLOUD_RUN_URL_MASK     | --[no-]app-engine-app --app-engine-service=APP_ENGINE_SERVICE --app-engine-url-mask=APP_ENGINE_URL_MASK --app-engine-version=APP_ENGINE_VERSION] [--global     | --region=REGION     | --zone=ZONE] [GCLOUD_WIDE_FLAG]
DESCRIPTION
Create a Compute Engine network endpoint group.
EXAMPLES
To create a network endpoint group:
gcloud compute network-endpoint-groups create my-neg --zone=us-central1-a --network=my-network --subnet=my-subnetwork
POSITIONAL ARGUMENTS
NAME
Name of the network endpoint group to operate on.
FLAGS
--default-port=DEFAULT_PORT
The default port to use if the port number is not specified in the network endpoint.

If this flag isn't specified for a NEG with endpoint type gce-vm-ip-port, gce-vm-ip-portmap or non-gcp-private-ip-port, then every network endpoint in the network endpoint group must have a port specified. For a global NEG with endpoint type internet-ip-port and internet-fqdn-port if the default port is not specified, the well-known port for your backend protocol is used (80 for HTTP, 443 for HTTPS).

This flag is not supported for NEGs with endpoint type serverless.

This flag is not supported for NEGs with endpoint type private-service-connect.

--network=NETWORK
Name of the network in which the NEG is created. default project network is used if unspecified.

This is only supported for NEGs with endpoint type gce-vm-ip-port, non-gcp-private-ip-port, gce-vm-ip, private-service-connect, internet-ip-port, or internet-fqdn-port.

For Private Service Connect NEGs, you can optionally specify --network and --subnet if --psc-target-service points to a published service. If --psc-target-service points to the regional service endpoint of a Google API, do not specify --network or --subnet.

--network-endpoint-type=NETWORK_ENDPOINT_TYPE; default="gce-vm-ip-port"
Determines the spec of endpoints attached to this group.
gce-vm-ip-port
Endpoint IP address must belong to a VM in Compute Engine (either the primary IP or as part of an aliased IP range). The --default-port must be specified or every network endpoint in the network endpoint group must have a port specified.
internet-ip-port
Endpoint IP address must be a publicly routable address. If specified, the default port is used. If unspecified, the well-known port for your backend protocol is used as the default port (80 for HTTP, 443 for HTTPS).
internet-fqdn-port
Endpoint FQDN must be resolvable to a public IP address via public DNS. The default port is used, if specified. If the default port is not specified, the well-known port for your backend protocol is used as the default port (80 for HTTP, 443 for HTTPS).

After creating a NEG of this type, you can use the gcloud compute network-endpoint-groups update command with the --add-endpoint flag. Example: --add-endpoint="fqdn=backend.example.com,port=443"

non-gcp-private-ip-port
Endpoint IP address must belong to a VM not in Compute Engine and must be routable using a Cloud Router over VPN or an Interconnect connection. In this case, the NEG must be zonal. The --default-port must be specified or every network endpoint in the network endpoint group must have a port specified.
serverless
The network endpoint is handled by specified serverless infrastructure, such as Cloud Run, App Engine, or Cloud Function. Default port, network, and subnet are not effective for serverless endpoints.
private-service-connect
The network endpoint corresponds to a service outside the VPC, accessed via Private Service Connect.
gce-vm-ip
Endpoint must be the IP address of a VM's network interface in Compute Engine. Instance reference is required. The IP address is optional. If unspecified, the primary NIC address is used. A port must not be specified.

NETWORK_ENDPOINT_TYPE must be one of: gce-vm-ip-port, internet-ip-port, internet-fqdn-port, non-gcp-private-ip-port, serverless, gce-vm-ip, private-service-connect.

--producer-port=PRODUCER_PORT
The producer port to use when a consumer PSC NEG connects to a producer's internal network load balancer. If this flag isn't specified for a NEG with endpoint type private-service-connect, the PSC NEG will connect to port 443 or the first available port in the PSC producer port range, or to port 1 if the PSC producer's forwarding rule ports flag is set to all-ports.

This flag is not supported for NEGs with endpoint type other than private-service-connect.

--psc-target-service=PSC_TARGET_SERVICE
PSC target service name to add to the private service connect network endpoint groups (NEG).
--subnet=SUBNET
Name of the subnet to which all network endpoints belong.

If not specified, network endpoints may belong to any subnetwork in the region where the network endpoint group is created.

This is only supported for NEGs with endpoint type gce-vm-ip-port, gce-vm-ip, or private-service-connect. For Private Service Connect NEGs, you can optionally specify --network and --subnet if --psc-target-service points to a published service. If --psc-target-service points to the regional service endpoint of a Google API, do not specify --network or --subnet.

The serverless routing configurations are only valid when endpoint type of the network endpoint group is serverless. At most one of these can be specified:
Configuration for a Cloud Function network endpoint group. Cloud Function name must be provided explicitly or in the URL mask.
--cloud-function-name=CLOUD_FUNCTION_NAME
Cloud Function name to add to the Serverless NEG. The function must be in the same project and the same region as the Serverless network endpoint groups (NEG).
--cloud-function-url-mask=CLOUD_FUNCTION_URL_MASK
A template to parse function field from a request URL. URL mask allows for routing to multiple Cloud Functions without having to create multiple network endpoint groups and backend services.
Configuration for a Cloud Run network endpoint group. Cloud Run service must be provided explicitly or in the URL mask. Cloud Run tag is optional, and may be provided explicitly or in the URL mask.
--cloud-run-service=CLOUD_RUN_SERVICE
Cloud Run service name to add to the Serverless network endpoint groups (NEG). The service must be in the same project and the same region as the Serverless NEG.
--cloud-run-tag=CLOUD_RUN_TAG
Cloud Run tag represents the "named revision" to provide additional fine-grained traffic routing configuration.
--cloud-run-url-mask=CLOUD_RUN_URL_MASK
A template to parse service and tag fields from a request URL. URL mask allows for routing to multiple Run services without having to create multiple network endpoint groups and backend services.
Configuration for an App Engine network endpoint group. Both App Engine service and version are optional, and may be provided explicitly or in the URL mask. The app-engine-app flag is only used for default routing. The App Engine app must be in the same project as the Serverless network endpoint groups (NEG).
--[no-]app-engine-app
If set, the default routing is used. Use --app-engine-app to enable and --no-app-engine-app to disable.
--app-engine-service=APP_ENGINE_SERVICE
Optional serving service to add to the Serverless NEG.
--app-engine-url-mask=APP_ENGINE_URL_MASK
A template to parse service and version fields from a request URL. URL mask allows for routing to multiple App Engine services without having to create multiple network endpoint groups and backend services.
--app-engine-version=APP_ENGINE_VERSION
Optional serving version to add to the Serverless NEG.
At most one of these can be specified:
--global
If set, the network endpoint group is global.
--region=REGION
Region of the network endpoint group to operate on. If not specified, you might be prompted to select a region (interactive mode only).

To avoid prompting when this flag is omitted, you can set the compute/region property:

gcloud config set compute/region REGION

A list of regions can be fetched by running:

gcloud compute regions list

To unset the property, run:

gcloud config unset compute/region

Alternatively, the region can be stored in the environment variable CLOUDSDK_COMPUTE_REGION.

--zone=ZONE
Zone of the network endpoint group to operate on. If not specified and the compute/zone property isn't set, you might be prompted to select a zone (interactive mode only).

To avoid prompting when this flag is omitted, you can set the compute/zone property:

gcloud config set compute/zone ZONE

A list of zones can be fetched by running:

gcloud compute zones list

To unset the property, run:

gcloud config unset compute/zone

Alternatively, the zone can be stored in the environment variable CLOUDSDK_COMPUTE_ZONE.

GCLOUD WIDE FLAGS
These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.

Run $ gcloud help for details.

NOTES
These variants are also available:
gcloud alpha compute network-endpoint-groups create
gcloud beta compute network-endpoint-groups create