gcloud compute interconnects attachments dedicated create

NAME
gcloud compute interconnects attachments dedicated create - create a Compute Engine dedicated interconnect attachment
SYNOPSIS
gcloud compute interconnects attachments dedicated create NAME --interconnect=INTERCONNECT --router=ROUTER [--bandwidth=BANDWIDTH] [--candidate-ipv6-subnets=[IPV6_SUBNET,…]] [--candidate-subnets=[SUBNET,…]] [--cloud-router-ipv6-interface-id=INTERFACE_ID] [--customer-router-ipv6-interface-id=PEER_INTERFACE_ID] [--description=DESCRIPTION] [--enable-admin] [--encryption=ENCRYPTION] [--ipsec-internal-addresses=[ADDRESSES]] [--mtu=MTU] [--region=REGION] [--stack-type=STACK_TYPE] [--subnet-length=SUBNET_LENGTH] [--vlan=VLAN] [GCLOUD_WIDE_FLAG …]
DESCRIPTION
gcloud compute interconnects attachments dedicated create is used to create a dedicated interconnect attachments. An interconnect attachment is what binds the underlying connectivity of an interconnect to a path into and out of the customer's cloud network.
POSITIONAL ARGUMENTS
NAME
Name of the interconnect attachment to create.
REQUIRED FLAGS
--interconnect=INTERCONNECT
The interconnect for the interconnect attachment
--router=ROUTER
The Google Cloud Router to use for dynamic routing.
OPTIONAL FLAGS
--bandwidth=BANDWIDTH
Provisioned capacity of the attachment. BANDWIDTH must be one of:
50m
50 Mbit/s
100m
100 Mbit/s
200m
200 Mbit/s
300m
300 Mbit/s
400m
400 Mbit/s
500m
500 Mbit/s
1g
1 Gbit/s
2g
2 Gbit/s
5g
5 Gbit/s
10g
10 Gbit/s
20g
20 Gbit/s
50g
50 Gbit/s
--candidate-ipv6-subnets=[IPV6_SUBNET,…]
The candididate-ipv6-subnets field is not available.
--candidate-subnets=[SUBNET,…]
Up to 16 candidate prefixes that can be used to restrict the allocation of cloudRouterIpAddress and customerRouterIpAddress for this attachment. All prefixes must be within link-local address space. Google attempts to select an unused subnet of SUBNET_LENGTH from the supplied candidate subnet(s), or all of link-local space if no subnets supplied. Google does not re-use a subnet already in-use by your project, even if it's contained in one of the candidate subnets. The request fails if all candidate subnets are in use at Google's edge.
--cloud-router-ipv6-interface-id=INTERFACE_ID
cloud-router-ipv6-interface-id field is not available.
--customer-router-ipv6-interface-id=PEER_INTERFACE_ID
customer-router-ipv6-interface-id field is not available.
--description=DESCRIPTION
Human-readable plain-text description of attachment.
--enable-admin
Administrative status of the interconnect attachment. If not provided on creation, defaults to enabled. When this is enabled, the attachment is operational and will carry traffic. Use --no-enable-admin to disable it.
--encryption=ENCRYPTION
Indicates the user-supplied encryption option for this interconnect attachment (VLAN attachment).

Possible values are:

NONE - This is the default value, which means the interconnect attachment carries unencrypted traffic. VMs can send traffic to or receive traffic from such interconnect attachment.

IPSEC - The interconnect attachment carries only traffic that is encrypted by an IPsec device; for example, an HA VPN gateway or third-party IPsec VPN. VMs cannot directly send traffic to or receive traffic from such an interconnect attachment. To use HA VPN over Cloud Interconnect, the interconnect attachment must be created with this option.

ENCRYPTION must be one of: IPSEC, NONE.

--ipsec-internal-addresses=[ADDRESSES]
List of IP address range names that have been reserved for the interconnect attachment (VLAN attachment). Use this option only for an interconnect attachment that has its encryption option set as IPSEC. Currently only one internal IP address range can be specified for each attachment. When creating an HA VPN gateway for the interconnect attachment, if the attachment is configured to use a regional internal IP address, then the VPN gateway's IP address is allocated from the IP address range specified here. If this field is not specified when creating the interconnect attachment, then when creating any HA VPN gateways for this interconnect attachment, the HA VPN gateway's IP address is allocated from a regional external IP address pool.
--mtu=MTU
Maximum transmission unit (MTU) is the size of the largest IP packet passing through this interconnect attachment. Must be one of 1440, 1460, 1500, or 8896. If not specified, the value will default to 1440.
--region=REGION
Region of the interconnect attachment to create. If not specified, you might be prompted to select a region (interactive mode only).

To avoid prompting when this flag is omitted, you can set the compute/region property: 

gcloud config set compute/region REGION

A list of regions can be fetched by running: 

gcloud compute regions list

To unset the property, run: 

gcloud config unset compute/region

Alternatively, the region can be stored in the environment variable CLOUDSDK_COMPUTE_REGION.

--stack-type=STACK_TYPE
Stack type of the protocol(s) enabled on this interconnect attachment. STACK_TYPE must be one of:
IPV4_IPV6
Both IPv4 and IPv6 protocols are enabled on this attachment.
IPV4_ONLY
Only IPv4 protocol is enabled on this attachment.
--subnet-length=SUBNET_LENGTH
Length of the IPv4 subnet mask for this attachment. 29 is the default value, except for attachments on Cross-Cloud Interconnects whose remote location's "constraints.subnetLengthRange" field specifies a minimum subnet length of 30. In that case, the default value is 30. The default value is recommended when there's no requirement on the subnet length. SUBNET_LENGTH must be one of: 29, 30.
--vlan=VLAN
Desired VLAN for this attachment, in the range 2-4093. If not supplied, Google will automatically select a VLAN.
GCLOUD WIDE FLAGS
These flags are available to all commands: --access-token-file, --account, --billing-project, --configuration, --flags-file, --flatten, --format, --help, --impersonate-service-account, --log-http, --project, --quiet, --trace-token, --user-output-enabled, --verbosity.

Run $ gcloud help for details.

NOTES
These variants are also available: 
gcloud alpha compute interconnects attachments dedicated create

gcloud beta compute interconnects attachments dedicated create