- NAME
-
- gcloud beta compute routers nats create - add a NAT to a Compute Engine router
- SYNOPSIS
-
-
gcloud beta compute routers nats createNAME--router=ROUTER(--nat-all-subnet-ip-ranges|--nat-custom-subnet-ip-ranges=SUBNETWORK[:RANGE_NAME|:ALL],[…] |--nat-primary-subnet-ip-ranges) [--async] [--auto-network-tier=AUTO_NETWORK_TIER] [--[no-]enable-dynamic-port-allocation] [--enable-endpoint-independent-mapping] [--enable-logging] [--endpoint-types=[ENDPOINT_TYPE,…]] [--icmp-idle-timeout=ICMP_IDLE_TIMEOUT] [--log-filter=LOG_FILTER] [--max-ports-per-vm=MAX_PORTS_PER_VM] [--min-ports-per-vm=MIN_PORTS_PER_VM] [--region=REGION] [--rules=RULES] [--tcp-established-idle-timeout=TCP_ESTABLISHED_IDLE_TIMEOUT] [--tcp-time-wait-timeout=TCP_TIME_WAIT_TIMEOUT] [--tcp-transitory-idle-timeout=TCP_TRANSITORY_IDLE_TIMEOUT] [--type=TYPE] [--udp-idle-timeout=UDP_IDLE_TIMEOUT] [--auto-allocate-nat-external-ips|--nat-external-ip-pool=IP_ADDRESS,[IP_ADDRESS,…]] [GCLOUD_WIDE_FLAG …]
-
- DESCRIPTION
-
(BETA)gcloud beta compute routers nats createis used to create a NAT on a Compute Engine router. - EXAMPLES
-
Auto-allocate NAT for all IP addresses of all subnets in the region:
gcloud beta compute routers nats create nat1 --router=my-router --auto-allocate-nat-external-ips --nat-all-subnet-ip-rangesSpecify IP addresses for NAT: Each IP address is the name of a reserved static IP address resource in the same region.
gcloud beta compute routers nats create nat1 --router=my-router --nat-external-ip-pool=ip-address1,ip-address2Specify subnet ranges for NAT:
By default, NAT works for all primary and secondary IP ranges for all subnets in the region for the given VPC network. You can restrict which subnet primary and secondary ranges can use NAT.
gcloud beta compute routers nats create nat1 --router=my-router --auto-allocate-nat-external-ips --nat-custom-subnet-ip-ranges=subnet-1,subnet-3:secondary-range-1 - POSITIONAL ARGUMENTS
-
NAME- Name of the NAT to create
- REQUIRED FLAGS
-
--router=ROUTER- The Router to use for NAT.
-
Exactly one of these must be specified:
--nat-all-subnet-ip-ranges- Allow all IP ranges of all subnetworks in the region, including primary and secondary ranges, to use NAT.
--nat-custom-subnet-ip-ranges=SUBNETWORK[:RANGE_NAME|:ALL],[…]-
List of subnetwork primary and secondary IP ranges to be allowed to use NAT.
-
SUBNETWORK:ALL- specifying a subnetwork name with ALL includes the primary range and all secondary ranges of the subnet. -
SUBNETWORK- including a subnetwork name includes only the primary subnet range of the subnetwork. -
SUBNETWORK:RANGE_NAME- specifying a subnetwork and secondary range name includes only that secondary range. It does not include the primary range of the subnet.
-
--nat-primary-subnet-ip-ranges- Allow only primary IP ranges of all subnetworks in the region to use NAT.
- OPTIONAL FLAGS
-
--async- Return immediately, without waiting for the operation in progress to complete.
--auto-network-tier=AUTO_NETWORK_TIER-
The network tier to use when automatically reserving NAT IP addresses.
AUTO_NETWORK_TIERmust be one of:PREMIUM- High quality, Google-grade network tier with support for all networking products.
STANDARD- Public internet quality, with only limited support for other networking products.
--[no-]enable-dynamic-port-allocation-
Enable dynamic port allocation.
If not specified, Dynamic Port Allocation is disabled by default.
Use
--enable-dynamic-port-allocationto enable and--no-enable-dynamic-port-allocationto disable. --enable-endpoint-independent-mapping-
Enable endpoint-independent mapping for the NAT (as defined in RFC 5128).
If not specified, NATs have endpoint-independent mapping disabled by default.
Use
--no-enable-endpoint-independent-mappingto disable endpoint-independent mapping. --enable-logging- Enable logging for the NAT. Logs will be exported to Stackdriver. NAT logging is disabled by default. To disable logging for the NAT, use $ gcloud beta compute routers nats update MY-NAT \ --no-enable-logging --router ROUTER --region REGION
--endpoint-types=[ENDPOINT_TYPE,…]-
Endpoint Types supported by the NAT Gateway.
ENDPOINT_TYPE must be one of:
ENDPOINT_TYPE_VM For VM Endpoints ENDPOINT_TYPE_SWG For Secure Web Gateway Endpoints ENDPOINT_TYPE_MANAGED_PROXY_LB For regional Application Load Balancers (internal and external) and regional proxy Network Load Balancers (internal and external) endpoints
The default is ENDPOINT_TYPE_VM.
ENDPOINT_TYPEmust be one of:ENDPOINT_TYPE_VM,ENDPOINT_TYPE_SWG,ENDPOINT_TYPE_MANAGED_PROXY_LB. --icmp-idle-timeout=ICMP_IDLE_TIMEOUT- Timeout for ICMP connections. See https://cloud.google.com/sdk/gcloud/reference/topic/datetimes for information on duration formats.
--log-filter=LOG_FILTER-
Filter for logs exported to stackdriver.
The default is ALL.
If logging is not enabled, filter settings will be persisted but will have no effect.
Use --[no-]enable-logging to enable and disable logging.
LOG_FILTERmust be one of:ALL- Export logs for all connections handled by this NAT.
ERRORS_ONLY- Export logs for connection failures only.
TRANSLATIONS_ONLY- Export logs for successful connections only.
--max-ports-per-vm=MAX_PORTS_PER_VM-
Maximum ports to be allocated to a VM.
This field can only be set when Dynamic Port Allocation is enabled and defaults to 65536. It must be set to a power of 2 that is greater than minPortsPerVm and at most 65536.
--min-ports-per-vm=MIN_PORTS_PER_VM-
Minimum ports to be allocated to a VM.
If Dynamic Port Allocation is disabled, this defaults to 64.
If Dynamic Port Allocation is enabled, this defaults to 32 and must be set to a power of 2 that is at least 32 and lower than maxPortsPerVm.
--region=REGION-
Region of the NAT to create. If not specified, you might be prompted to select a
region (interactive mode only).
To avoid prompting when this flag is omitted, you can set the
compute/regiongcloud config set compute/region REGIONA list of regions can be fetched by running:
gcloud compute regions listTo unset the property, run:
gcloud config unset compute/regionAlternatively, the region can be stored in the environment variable
CLOUDSDK_COMPUTE_REGION --rules=RULES- Path to YAML file containing NAT Rules applied to the NAT. The YAML file format must follow the REST API schema for NAT Rules. See API Discovery docs for reference.
--tcp-established-idle-timeout=TCP_ESTABLISHED_IDLE_TIMEOUT- Timeout for TCP established connections. See https://cloud.google.com/sdk/gcloud/reference/topic/datetimes for information on duration formats.
--tcp-time-wait-timeout=TCP_TIME_WAIT_TIMEOUT- Timeout for TCP connections in the TIME_WAIT state. See https://cloud.google.com/sdk/gcloud/reference/topic/datetimes for information on duration formats.
--tcp-transitory-idle-timeout=TCP_TRANSITORY_IDLE_TIMEOUT- Timeout for TCP transitory connections. See https://cloud.google.com/sdk/gcloud/reference/topic/datetimes for information on duration formats.
--type=TYPE-
Type of the NAT Gateway. Defaults to PUBLIC if not specified.
TYPEmust be one of:PRIVATE- Used for private-to-private NAT translations. Allows communication between VPC Networks.
PUBLIC- Used for private-to-public NAT translations. Allows VM instances to communicate with the internet.
--udp-idle-timeout=UDP_IDLE_TIMEOUT- Timeout for UDP connections. See https://cloud.google.com/sdk/gcloud/reference/topic/datetimes for information on duration formats.
-
At most one of these can be specified:
--auto-allocate-nat-external-ips- Automatically allocate external IP addresses for Cloud NAT
--nat-external-ip-pool=IP_ADDRESS,[IP_ADDRESS,…]- External IP Addresses to use for Cloud NAT
- GCLOUD WIDE FLAGS
-
These flags are available to all commands:
--access-token-file,--account,--billing-project,--configuration,--flags-file,--flatten,--format,--help,--impersonate-service-account,--log-http,--project,--quiet,--trace-token,--user-output-enabled,--verbosity.Run
$ gcloud helpfor details. - API REFERENCE
-
This command, when specified without alpha or beta, uses the compute/v1/routers
API. The full documentation for this API can be found at: https://cloud.google.com/compute/docs/reference/rest/v1/routers/
The beta command uses the compute/beta/routers API. The full documentation for this API can be found at: https://cloud.google.com/compute/docs/reference/rest/beta/routers/
The alpha command uses the compute/alpha/routers API. Full documentation is not available for the alpha API.
- NOTES
-
This command is currently in beta and might change without notice. These
variants are also available:
gcloud compute routers nats creategcloud alpha compute routers nats create
Except as otherwise noted, the content of this page is licensed under the Creative Commons Attribution 4.0 License, and code samples are licensed under the Apache 2.0 License. For details, see the Google Developers Site Policies. Java is a registered trademark of Oracle and/or its affiliates.
Last updated 2024-04-23 UTC.