- NAME
-
- gcloud alpha compute routers nats rules update - update a Rule in a Compute Engine NAT
- SYNOPSIS
-
-
gcloud alpha compute routers nats rules update
RULE_NUMBER
--nat
=NAT
--router
=ROUTER
[--async
] [--match
=MATCH
] [--region
=REGION
] [--source-nat-active-ips
=IP_ADDRESS
,[IP_ADDRESS
,…]] [--source-nat-active-ranges
=SUBNETWORK
,[SUBNETWORK
,…]] [--clear-source-nat-drain-ips
|--source-nat-drain-ips
=IP_ADDRESS
,[IP_ADDRESS
,…]] [--clear-source-nat-drain-ranges
|--source-nat-drain-ranges
=SUBNETWORK
,[SUBNETWORK
,…]] [GCLOUD_WIDE_FLAG …
]
-
- DESCRIPTION
-
(ALPHA)
gcloud alpha compute routers nats rules update
is used to update a Rule in a Compute Engine NAT. - EXAMPLES
-
To drain connections established using address-1 and use address-2 for all new
connections matching Rule 1 in NAT nat-1, run:
gcloud alpha compute routers nats rules update 1 --nat=nat1 --router=my-router --region=us-central1 --source-nat-drain-ips=address-1 --source-nat-active-ips=address-2
- POSITIONAL ARGUMENTS
-
RULE_NUMBER
- Number that uniquely identifies the Rule to update
- REQUIRED FLAGS
-
--nat
=NAT
- Name of the NAT that contains the Rule
--router
=ROUTER
- The Router to use for NAT.
- OPTIONAL FLAGS
-
--async
- Return immediately, without waiting for the operation in progress to complete.
--match
=MATCH
-
CEL Expression used to identify traffic to which this rule applies.
- Supported attributes (Public NAT): destination.ip
- Supported attributes (Private NAT): nexthop.hub
- Supported methods (Public Nat): inIpRange
- Supported operators (Public NAT): ||, ==
- Supported operators (Private NAT): ==
Examples of allowed Match expressions (Public NAT):
- 'inIpRange(destination.ip, "203.0.113.0/24")''
- 'destination.ip == "203.0.113.7"'
- 'destination.ip == "203.0.113.7" || inIpRange(destination.ip, "203.0.113.16/25")'
Example of allowed Match expression (Private NAT):
- nexthop.hub == "//networkconnectivity.googleapis.com/projects/p1/locations/global/hubs/h1"
--region
=REGION
-
Region of the NAT containing the Rule to update. If not specified, you might be
prompted to select a region (interactive mode only).
To avoid prompting when this flag is omitted, you can set the
property:compute/region
gcloud config set compute/region REGION
A list of regions can be fetched by running:
gcloud compute regions list
To unset the property, run:
gcloud config unset compute/region
Alternatively, the region can be stored in the environment variable
.CLOUDSDK_COMPUTE_REGION
--source-nat-active-ips
=IP_ADDRESS
,[IP_ADDRESS
,…]-
External IP Addresses to use for connections matching this rule. This flag is
supported only for Public NAT and is required when creating a Public NAT
gateway.
These must be valid reserved external IP addresses in the same region.
--source-nat-active-ranges
=SUBNETWORK
,[SUBNETWORK
,…]-
Subnetworks from which addresses are used for connections matching this rule.
This flag is supported only for Private NAT and is required when creating a
Private NAT gateway.
These must be subnetwork resources in the same region, with purpose set to PRIVATE_NAT.
-
At most one of these can be specified:
--clear-source-nat-drain-ips
- Clear drained IPs from the rule
--source-nat-drain-ips
=IP_ADDRESS
,[IP_ADDRESS
,…]-
External IP Addresses to drain connections on.
These must be external IPs previously used as active IPs on this rule. No new connections will be established using these IPs.
-
At most one of these can be specified:
--clear-source-nat-drain-ranges
- Clear drained ranges from the rule
--source-nat-drain-ranges
=SUBNETWORK
,[SUBNETWORK
,…]-
Subnetwork ranges to drain connections on.
These must be subnetworks previously used as active ranges on this rule. No new connections will be established using these ranges.
- GCLOUD WIDE FLAGS
-
These flags are available to all commands:
--access-token-file
,--account
,--billing-project
,--configuration
,--flags-file
,--flatten
,--format
,--help
,--impersonate-service-account
,--log-http
,--project
,--quiet
,--trace-token
,--user-output-enabled
,--verbosity
.Run
$ gcloud help
for details. - NOTES
-
This command is currently in alpha and might change without notice. If this
command fails with API permission errors despite specifying the correct project,
you might be trying to access an API with an invitation-only early access
allowlist. These variants are also available:
gcloud compute routers nats rules update
gcloud beta compute routers nats rules update
Except as otherwise noted, the content of this page is licensed under the Creative Commons Attribution 4.0 License, and code samples are licensed under the Apache 2.0 License. For details, see the Google Developers Site Policies. Java is a registered trademark of Oracle and/or its affiliates.
Last updated 2024-04-23 UTC.
[{
"type": "thumb-down",
"id": "hardToUnderstand",
"label":"Hard to understand"
},{
"type": "thumb-down",
"id": "incorrectInformationOrSampleCode",
"label":"Incorrect information or sample code"
},{
"type": "thumb-down",
"id": "missingTheInformationSamplesINeed",
"label":"Missing the information/samples I need"
},{
"type": "thumb-down",
"id": "otherDown",
"label":"Other"
}]
[{
"type": "thumb-up",
"id": "easyToUnderstand",
"label":"Easy to understand"
},{
"type": "thumb-up",
"id": "solvedMyProblem",
"label":"Solved my problem"
},{
"type": "thumb-up",
"id": "otherUp",
"label":"Other"
}]
{
"last_modified": "Last updated 2024-04-23 UTC.",
"state": ""
}