Lexical structure and syntax

A GoogleSQL statement comprises a series of tokens. Tokens include identifiers, quoted identifiers, literals, keywords, operators, and special characters. You can separate tokens with comments or whitespace such as spaces, backspaces, tabs, or newlines.

Identifiers

Identifiers are names that are associated with columns, tables, fields, path expressions, and more. They can be unquoted or quoted and some are case-sensitive.

Unquoted identifiers

Must begin with a letter or an underscore (_) character.
Subsequent characters can be letters, numbers, or underscores (_).

Quoted identifiers

Must be enclosed by backtick (`) characters.
Can contain any characters, including spaces and symbols.
Cannot be empty.
Have the same escape sequences as string literals.
If an identifier is the same as a reserved keyword, the identifier must be quoted. For example, the identifier FROM must be quoted. Additional rules apply for path expressions , table names, column names, and field names.

Identifier examples

Path expression examples:

-- Valid. _5abc and dataField are valid identifiers.
_5abc.dataField

-- Valid. `5abc` and dataField are valid identifiers.
`5abc`.dataField

-- Invalid. 5abc is an invalid identifier because it is unquoted and starts
-- with a number rather than a letter or underscore.
5abc.dataField

-- Valid. abc5 and dataField are valid identifiers.
abc5.dataField

-- Invalid. abc5! is an invalid identifier because it is unquoted and contains
-- a character that is not a letter, number, or underscore.
abc5!.dataField

-- Valid. `GROUP` and dataField are valid identifiers.
`GROUP`.dataField

-- Invalid. GROUP is an invalid identifier because it is unquoted and is a
-- stand-alone reserved keyword.
GROUP.dataField

-- Valid. abc5 and GROUP are valid identifiers.
abc5.GROUP

Function examples:

-- Valid. dataField is a valid identifier in a function called foo().
foo().dataField

Array access operation examples:

-- Valid. dataField is a valid identifier in an array called items.
items[OFFSET(3)].dataField

Named query parameter examples:

-- Valid. param and dataField are valid identifiers.
@param.dataField

Table name examples:

-- Valid table path.
myproject.mydatabase.mytable287

-- Valid table path.
myproject287.mydatabase.mytable

-- Invalid table path. The project name starts with a number and is unquoted.
287myproject.mydatabase.mytable

-- Invalid table name. The table name is unquoted and is not a valid
-- dashed identifier, as the part after the dash is neither a number nor
-- an identifier starting with a letter or an underscore.
mytable-287a

-- Valid table path.
my-project.mydataset.mytable

-- Valid table name.
my-table

-- Invalid table path because the dash is not in the first part
-- of the path.
myproject.mydataset.my-table

-- Invalid table path because a dataset name cannot contain dashes.
my-dataset.mytable

Path expressions

A path expression describes how to navigate to an object in a graph of objects and generally follows this structure:

path:
  [path_expression][. ...]

path_expression:
  [first_part]/subsequent_part[ { / | : | - } subsequent_part ][...]

first_part:
  { unquoted_identifier | quoted_identifier }

subsequent_part:
  { unquoted_identifier | quoted_identifier | number }

path: A graph of one or more objects.
path_expression: An object in a graph of objects.
first_part: A path expression can start with a quoted or unquoted identifier. If the path expressions starts with a reserved keyword, it must be a quoted identifier.
subsequent_part: Subsequent parts of a path expression can include non-identifiers, such as reserved keywords. If a subsequent part of a path expressions starts with a reserved keyword, it may be quoted or unquoted.

Examples:

foo.bar
foo.bar/25
foo/bar:25
foo/bar/25-31
/foo/bar
/25/foo/bar

Table names

A table name represents the name of a table.

Table names can be quoted identifiers or unquoted identifiers.
A table name that is an unquoted identifier can additionally include single dashes if the table name is referenced in a FROM or TABLE clause. Only the first identifier in the table path (the project ID or the table name) can have dashes. Dashes are not supported in datasets.
A table name can be a fully qualified table name (table path) that includes up to three quoted or unquoted identifiers:
- An optional project ID
- An optional dataset name
- A required table name.
For example: myproject.mydataset.mytable
Table names can be path expressions.
Table names have case-sensitivity rules.
Table names have additional rules.

Examples:

my-project.mydataset.mytable
mydataset.mytable
my-table
mytable
`287mytable`

Column names

A column name represents the name of a column in a table.

Column names can be quoted identifiers or unquoted identifiers.
If unquoted, identifiers support dashed identifiers when referenced in a FROM or TABLE clause.
Column names have additional rules.

Examples:

columnA
column-a
`287column`

Field names

A field name represents the name of a field inside a complex data type such as a struct or JSON object.

A field name can be a quoted identifier or an unquoted identifier.
Field names must adhere to all of the rules for column names.

Literals

A literal represents a constant value of a built-in data type. Some, but not all, data types can be expressed as literals.

String and bytes literals

A string literal represents a constant value of the string data type. A bytes literal represents a constant value of the bytes data type.

Both string and bytes literals must be quoted, either with single (') or double (") quotation marks, or triple-quoted with groups of three single (''') or three double (""") quotation marks.

Formats for quoted literals

The following table lists all of the ways you can format a quoted literal.

Literal	Examples	Description
Quoted string	`"abc"` `"it's"` `'it\'s'` `'Title: "Boy"'`	Quoted strings enclosed by single (`'`) quotes can contain unescaped double (`"`) quotes, as well as the inverse. Backslashes (`\`) introduce escape sequences. See the Escape Sequences table below. Quoted strings cannot contain newlines, even when preceded by a backslash (`\`).
Triple-quoted string	`"""abc"""` `'''it's'''` `'''Title:"Boy"'''` `'''two lines'''` `'''why\?'''`	Embedded newlines and quotes are allowed without escaping - see fourth example. Backslashes (`\`) introduce escape sequences. See Escape Sequences table below. A trailing unescaped backslash (`\`) at the end of a line is not allowed. End the string with three unescaped quotes in a row that match the starting quotes.
Raw string	`r"abc+"` `r'''abc+'''` `r"""abc+"""` `r'f\(abc,(.*),def\)'`	Quoted or triple-quoted literals that have the raw string literal prefix (`r` or `R`) are interpreted as raw strings (sometimes described as regex strings). Backslash characters (`\`) do not act as escape characters. If a backslash followed by another character occurs inside the string literal, both characters are preserved. A raw string cannot end with an odd number of backslashes. Raw strings are useful for constructing regular expressions. The prefix is case-insensitive.
Bytes	`B"abc"` `B'''abc'''` `b"""abc"""`	Quoted or triple-quoted literals that have the bytes literal prefix (`b` or `B`) are interpreted as bytes.
Raw bytes	`br'abc+'` `RB"abc+"` `RB'''abc'''`	A bytes literal can be interpreted as raw bytes if both the `r` and `b` prefixes are present. These prefixes can be combined in any order and are case-insensitive. For example, `rb'abc'` and `rB'abc'` and `br'abc*'` are all equivalent. See the description for raw string to learn more about what you can do with a raw literal.

Escape sequences for string and bytes literals

The following table lists all valid escape sequences for representing non-alphanumeric characters in string and bytes literals. Any sequence not in this table produces an error.

Escape Sequence	Description
`\a`	Bell
`\b`	Backspace
`\f`	Formfeed
`\n`	Newline
`\r`	Carriage Return
`\t`	Tab
`\v`	Vertical Tab
`\\`	Backslash (`\`)
`\?`	Question Mark (`?`)
`\"`	Double Quote (`"`)
`\'`	Single Quote (`'`)
\`	Backtick (`)
`\ooo`	Octal escape, with exactly 3 digits (in the range 0–7). Decodes to a single Unicode character (in string literals) or byte (in bytes literals).
`\xhh` or `\Xhh`	Hex escape, with exactly 2 hex digits (0–9 or A–F or a–f). Decodes to a single Unicode character (in string literals) or byte (in bytes literals). Examples: `'\x41'` == `'A'` `'\x41B'` is `'AB'` `'\x4'` is an error
`\uhhhh`	Unicode escape, with lowercase 'u' and exactly 4 hex digits. Valid only in string literals or identifiers. Note that the range D800-DFFF is not allowed, as these are surrogate unicode values.
`\Uhhhhhhhh`	Unicode escape, with uppercase 'U' and exactly 8 hex digits. Valid only in string literals or identifiers. The range D800-DFFF is not allowed, as these values are surrogate unicode values. Also, values greater than 10FFFF are not allowed.

Integer literals

Integer literals are either a sequence of decimal digits (0–9) or a hexadecimal value that is prefixed with "0x" or "0X". Integers can be prefixed by "+" or "-" to represent positive and negative values, respectively. Examples:

123
0xABC
-123

An integer literal is interpreted as an INT64.

A integer literal represents a constant value of the integer data type.

`NUMERIC` literals

You can construct NUMERIC literals using the NUMERIC keyword followed by a floating point value in quotes.

Examples:

SELECT NUMERIC '0';
SELECT NUMERIC '123456';
SELECT NUMERIC '-3.14';
SELECT NUMERIC '-0.54321';
SELECT NUMERIC '1.23456e05';
SELECT NUMERIC '-9.876e-3';

A NUMERIC literal represents a constant value of the NUMERIC data type.

`BIGNUMERIC` literals

You can construct BIGNUMERIC literals using the BIGNUMERIC keyword followed by a floating point value in quotes.

Examples:

SELECT BIGNUMERIC '0';
SELECT BIGNUMERIC '123456';
SELECT BIGNUMERIC '-3.14';
SELECT BIGNUMERIC '-0.54321';
SELECT BIGNUMERIC '1.23456e05';
SELECT BIGNUMERIC '-9.876e-3';

A BIGNUMERIC literal represents a constant value of the BIGNUMERIC data type.

Floating point literals

Syntax options:

[+-]DIGITS.[DIGITS][e[+-]DIGITS]
[+-][DIGITS].DIGITS[e[+-]DIGITS]
DIGITSe[+-]DIGITS

DIGITS represents one or more decimal numbers (0 through 9) and e represents the exponent marker (e or E).

Examples:

123.456e-67
.1E4
58.
4e2

Numeric literals that contain either a decimal point or an exponent marker are presumed to be type double.

Implicit coercion of floating point literals to float type is possible if the value is within the valid float range.

There is no literal representation of NaN or infinity, but the following case-insensitive strings can be explicitly cast to float:

"NaN"
"inf" or "+inf"
"-inf"

A floating-point literal represents a constant value of the floating-point data type.

Array literals

Array literals are comma-separated lists of elements enclosed in square brackets. The ARRAY keyword is optional, and an explicit element type T is also optional.

Examples:

[1, 2, 3]
['x', 'y', 'xy']
ARRAY[1, 2, 3]
ARRAY<string>['x', 'y', 'xy']
ARRAY<int64>[]

An array literal represents a constant value of the array data type.

Struct literals

A struct literal is a struct whose fields are all literals. Struct literals can be written using any of the syntaxes for constructing a struct (tuple syntax, typeless struct syntax, or typed struct syntax).

Note that tuple syntax requires at least two fields, in order to distinguish it from an ordinary parenthesized expression. To write a struct literal with a single field, use typeless struct syntax or typed struct syntax.

Example	Output Type
`(1, 2, 3)`	`STRUCT<INT64, INT64, INT64>`
`(1, 'abc')`	`STRUCT<INT64, STRING>`
`STRUCT(1 AS foo, 'abc' AS bar)`	`STRUCT<foo INT64, bar STRING>`
`STRUCT<INT64, STRING>(1, 'abc')`	`STRUCT<INT64, STRING>`
`STRUCT(1)`	`STRUCT<INT64>`
`STRUCT<INT64>(1)`	`STRUCT<INT64>`

A struct literal represents a constant value of the struct data type.

Date literals

Syntax:

DATE 'date_canonical_format'

Date literals contain the DATE keyword followed by date_canonical_format, a string literal that conforms to the canonical date format, enclosed in single quotation marks. Date literals support a range between the years 1 and 9999, inclusive. Dates outside of this range are invalid.

For example, the following date literal represents September 27, 2014:

DATE '2014-09-27'

String literals in canonical date format also implicitly coerce to DATE type when used where a DATE-type expression is expected. For example, in the query

SELECT * FROM foo WHERE date_col = "2014-09-27"

the string literal "2014-09-27" will be coerced to a date literal.

A date literal represents a constant value of the date data type.

Time literals

Syntax:

TIME 'time_canonical_format'

Time literals contain the TIME keyword and time_canonical_format, a string literal that conforms to the canonical time format, enclosed in single quotation marks.

For example, the following time represents 12:30 p.m.:

TIME '12:30:00.45'

A time literal represents a constant value of the time data type.

Datetime literals

Syntax:

DATETIME 'datetime_canonical_format'

Datetime literals contain the DATETIME keyword and datetime_canonical_format, a string literal that conforms to the canonical datetime format, enclosed in single quotation marks.

For example, the following datetime represents 12:30 p.m. on September 27, 2014:

DATETIME '2014-09-27 12:30:00.45'

Datetime literals support a range between the years 1 and 9999, inclusive. Datetimes outside of this range are invalid.

String literals with the canonical datetime format implicitly coerce to a datetime literal when used where a datetime expression is expected.

For example:

SELECT * FROM foo
WHERE datetime_col = "2014-09-27 12:30:00.45"

In the query above, the string literal "2014-09-27 12:30:00.45" is coerced to a datetime literal.

A datetime literal can also include the optional character T or t. If you use this character, a space can't be included before or after it. These are valid:

DATETIME '2014-09-27T12:30:00.45'
DATETIME '2014-09-27t12:30:00.45'

A datetime literal represents a constant value of the datatime data type.

Timestamp literals

Syntax:

TIMESTAMP 'timestamp_canonical_format'

Timestamp literals contain the TIMESTAMP keyword and timestamp_canonical_format, a string literal that conforms to the canonical timestamp format, enclosed in single quotation marks.

Timestamp literals support a range between the years 1 and 9999, inclusive. Timestamps outside of this range are invalid.

A timestamp literal can include a numerical suffix to indicate the time zone:

TIMESTAMP '2014-09-27 12:30:00.45-08'

If this suffix is absent, the default time zone, UTC, is used.

For example, the following timestamp represents 12:30 p.m. on September 27, 2014 in the default time zone, UTC:

TIMESTAMP '2014-09-27 12:30:00.45'

For more information about time zones, see Time zone.

String literals with the canonical timestamp format, including those with time zone names, implicitly coerce to a timestamp literal when used where a timestamp expression is expected. For example, in the following query, the string literal "2014-09-27 12:30:00.45 America/Los_Angeles" is coerced to a timestamp literal.

SELECT * FROM foo
WHERE timestamp_col = "2014-09-27 12:30:00.45 America/Los_Angeles"

A timestamp literal can include these optional characters:

T or t
Z or z

If you use one of these characters, a space can't be included before or after it. These are valid:

TIMESTAMP '2017-01-18T12:34:56.123456Z'
TIMESTAMP '2017-01-18t12:34:56.123456'
TIMESTAMP '2017-01-18 12:34:56.123456z'
TIMESTAMP '2017-01-18 12:34:56.123456Z'

A timestamp literal represents a constant value of the timestamp data type.

Time zone

Since timestamp literals must be mapped to a specific point in time, a time zone is necessary to correctly interpret a literal. If a time zone is not specified as part of the literal itself, then GoogleSQL uses the default time zone value, which the GoogleSQL implementation sets.

GoogleSQL can represent a time zones using a string, which represents the offset from Coordinated Universal Time (UTC).

Examples:

'-08:00'
'-8:15'
'+3:00'
'+07:30'
'-7'

Time zones can also be expressed using string time zone names.

Examples:

TIMESTAMP '2014-09-27 12:30:00 America/Los_Angeles'
TIMESTAMP '2014-09-27 12:30:00 America/Argentina/Buenos_Aires'

Range literals

Syntax:

RANGE<T> '[lower_bound, upper_bound)'

A range literal contains a contiguous range between two dates, datetimes, or timestamps. The lower or upper bound can be unbounded, if desired.

Example of a date range literal with a lower and upper bound:

RANGE<DATE> '[2020-01-01, 2020-12-31)'

Example of a datetime range literal with a lower and upper bound:

RANGE<DATETIME> '[2020-01-01 12:00:00, 2020-12-31 12:00:00)'

Example of a timestamp range literal with a lower and upper bound:

RANGE<TIMESTAMP> '[2020-10-01 12:00:00+08, 2020-12-31 12:00:00+08)'

Examples of a range literal without a lower bound:

RANGE<DATE> '[UNBOUNDED, 2020-12-31)'

RANGE<DATE> '[NULL, 2020-12-31)'

Examples of a range literal without an upper bound:

RANGE<DATE> '[2020-01-01, UNBOUNDED)'

RANGE<DATE> '[2020-01-01, NULL)'

Examples of a range literal that includes all possible values:

RANGE<DATE> '[UNBOUNDED, UNBOUNDED)'

RANGE<DATE> '[NULL, NULL)'

There must be a single whitespace after the comma in a range literal, otherwise an error is produced. For example:

-- This range literal is valid:
RANGE<DATE> '[2020-01-01, 2020-12-31)'

-- This range literal produces an error:
RANGE<DATE> '[2020-01-01,2020-12-31)'

A range literal represents a constant value of the range data type.

Interval literals

An interval literal represents a constant value of the interval data type. There are two types of interval literals:

Interval literal with a single datetime part
Interval literal with a datetime part range

An interval literal can be used directly inside of the SELECT statement and as an argument in some functions that support the interval data type.

Interval literal with a single datetime part

Syntax:

INTERVAL int64_expression datetime_part

The single datetime part syntax includes an INT64 expression and a single interval-supported datetime part. For example:

-- 0 years, 0 months, 5 days, 0 hours, 0 minutes, 0 seconds (0-0 5 0:0:0)
INTERVAL 5 DAY

-- 0 years, 0 months, -5 days, 0 hours, 0 minutes, 0 seconds (0-0 -5 0:0:0)
INTERVAL -5 DAY

-- 0 years, 0 months, 0 days, 0 hours, 0 minutes, 1 seconds (0-0 0 0:0:1)
INTERVAL 1 SECOND

When a negative sign precedes the year or month part in an interval literal, the negative sign distributes over the years and months. Or, when a negative sign precedes the time part in an interval literal, the negative sign distributes over the hours, minutes, and seconds. For example:

-- -2 years, -1 months, 0 days, 0 hours, 0 minutes, and 0 seconds (-2-1 0 0:0:0)
INTERVAL -25 MONTH

-- 0 years, 0 months, 0 days, -1 hours, -30 minutes, and 0 seconds (0-0 0 -1:30:0)
INTERVAL -90 MINUTE

For more information on how to construct interval with a single datetime part, see Construct an interval with a single datetime part.

Interval literal with a datetime part range

Syntax:

INTERVAL datetime_parts_string starting_datetime_part TO ending_datetime_part

The range datetime part syntax includes a datetime parts string, a starting datetime part, and an ending datetime part.

For example:

-- 0 years, 0 months, 0 days, 10 hours, 20 minutes, 30 seconds (0-0 0 10:20:30.520)
INTERVAL '10:20:30.52' HOUR TO SECOND

-- 1 year, 2 months, 0 days, 0 hours, 0 minutes, 0 seconds (1-2 0 0:0:0)
INTERVAL '1-2' YEAR TO MONTH

-- 0 years, 1 month, -15 days, 0 hours, 0 minutes, 0 seconds (0-1 -15 0:0:0)
INTERVAL '1 -15' MONTH TO DAY

-- 0 years, 0 months, 1 day, 5 hours, 30 minutes, 0 seconds (0-0 1 5:30:0)
INTERVAL '1 5:30' DAY TO MINUTE

-- -23 years, -2 months, 10 days, -12 hours, -30 minutes, and 0 seconds (-23-2 10 -12:30:0)
INTERVAL '-23-2 10 -12:30' YEAR TO MINUTE

-- -23 years, -2 months, 10 days, 0 hours, -30 minutes, and 0 seconds (-23-2 10 -0:30:0)
SELECT INTERVAL '-23-2 10 -0:30' YEAR TO MINUTE

-- Produces an error because the negative sign for minutes must come before the hour.
SELECT INTERVAL '-23-2 10 0:-30' YEAR TO MINUTE

-- Produces an error because the negative sign for months must come before the year.
SELECT INTERVAL '23--2 10 0:30' YEAR TO MINUTE

-- 0 years, -2 months, 10 days, 0 hours, 30 minutes, and 0 seconds (-0-2 10 0:30:0)
SELECT INTERVAL '-2 10 0:30' MONTH TO MINUTE

-- 0 years, 0 months, 0 days, 0 hours, -30 minutes, and -10 seconds (0-0 0 -0:30:10)
SELECT INTERVAL '-30:10' MINUTE TO SECOND

For more information on how to construct interval with a datetime part range, see Construct an interval with a datetime part range.

JSON literals

Syntax:

JSON 'json_formatted_data'

A JSON literal represents JSON-formatted data.

Example:

JSON '
{
  "id": 10,
  "type": "fruit",
  "name": "apple",
  "on_menu": true,
  "recipes":
    {
      "salads":
      [
        { "id": 2001, "type": "Walnut Apple Salad" },
        { "id": 2002, "type": "Apple Spinach Salad" }
      ],
      "desserts":
      [
        { "id": 3001, "type": "Apple Pie" },
        { "id": 3002, "type": "Apple Scones" },
        { "id": 3003, "type": "Apple Crumble" }
      ]
    }
}
'

A JSON literal represents a constant value of the JSON data type.

Case sensitivity

GoogleSQL follows these rules for case sensitivity:

Category	Case-sensitive?	Notes
Keywords	No
Built-in Function names	No
User-Defined Function names	Yes
Table names	See Notes	Dataset and table names are case-sensitive unless the `is_case_insensitive` option is set to `TRUE`.
Column names	No
String values	Yes	Any value of type `STRING` preserves its case. For example, the result of an expression that produces a `STRING` value or a column value that's of type `STRING`.
String comparisons	Yes
Aliases within a query	No
Regular expression matching	See Notes	Regular expression matching is case-sensitive by default, unless the expression itself specifies that it should be case-insensitive.
`LIKE` matching	Yes

Reserved keywords

Keywords are a group of tokens that have special meaning in the GoogleSQL language, and have the following characteristics:

Keywords cannot be used as identifiers unless enclosed by backtick (`) characters.
Keywords are case-insensitive.

GoogleSQL has the following reserved keywords.

ALL
AND
ANY
ARRAY
AS
ASC
ASSERT_ROWS_MODIFIED
AT
BETWEEN
BY
CASE
CAST
COLLATE
CONTAINS
CREATE
CROSS
CUBE
CURRENT
DEFAULT
DEFINE
DESC
DISTINCT
ELSE
END

ENUM
ESCAPE
EXCEPT
EXCLUDE
EXISTS
EXTRACT
FALSE
FETCH
FOLLOWING
FOR
FROM
FULL
GROUP
GROUPING
GROUPS
HASH
HAVING
IF
IGNORE
IN
INNER
INTERSECT
INTERVAL
INTO

IS
JOIN
LATERAL
LEFT
LIKE
LIMIT
LOOKUP
MERGE
NATURAL
NEW
NO
NOT
NULL
NULLS
OF
ON
OR
ORDER
OUTER
OVER
PARTITION
PRECEDING
PROTO
QUALIFY
RANGE

RECURSIVE
RESPECT
RIGHT
ROLLUP
ROWS
SELECT
SET
SOME
STRUCT
TABLESAMPLE
THEN
TO
TREAT
TRUE
UNBOUNDED
UNION
UNNEST
USING
WHEN
WHERE
WINDOW
WITH
WITHIN

Terminating semicolons

You can optionally use a terminating semicolon (;) when you submit a query string statement through an Application Programming Interface (API).

In a request containing multiple statements, you must separate statements with semicolons, but the semicolon is generally optional after the final statement. Some interactive tools require statements to have a terminating semicolon.

Trailing commas

You can optionally use a trailing comma (,) at the end of a column list in a SELECT statement. You might have a trailing comma as the result of programmatically creating a column list.

Example

SELECT name, release_date, FROM Books

Query parameters

You can use query parameters to substitute arbitrary expressions. However, query parameters cannot be used to substitute identifiers, column names, table names, or other parts of the query itself. Query parameters are defined outside of the query statement.

Client APIs allow the binding of parameter names to values; the query engine substitutes a bound value for a parameter at execution time.

Query parameters cannot be used in the SQL body of these statements: CREATE FUNCTION, CREATE VIEW, CREATE MATERIALIZED VIEW, and CREATE PROCEDURE.

Named query parameters

Syntax:

@parameter_name

A named query parameter is denoted using an identifier preceded by the @ character. Named query parameters cannot be used alongside positional query parameters.

A named query parameter can start with an identifier or a reserved keyword. An identifier can be unquoted or quoted.

Example:

This example returns all rows where LastName is equal to the value of the named query parameter myparam.

SELECT * FROM Roster WHERE LastName = @myparam

Positional query parameters

Positional query parameters are denoted using the ? character. Positional parameters are evaluated by the order in which they are passed in. Positional query parameters cannot be used alongside named query parameters.

Example:

This query returns all rows where LastName and FirstName are equal to the values passed into this query. The order in which these values are passed in matters. If the last name is passed in first, followed by the first name, the expected results will not be returned.

SELECT * FROM Roster WHERE FirstName = ? and LastName = ?

Comments

Comments are sequences of characters that the parser ignores. GoogleSQL supports the following types of comments.

Single-line comments

Use a single-line comment if you want the comment to appear on a line by itself.

Examples

# this is a single-line comment
SELECT book FROM library;

-- this is a single-line comment
SELECT book FROM library;

/* this is a single-line comment */
SELECT book FROM library;

SELECT book FROM library
/* this is a single-line comment */
WHERE book = "Ulysses";

Inline comments

Use an inline comment if you want the comment to appear on the same line as a statement. A comment that is prepended with # or -- must appear to the right of a statement.

Examples

SELECT book FROM library; # this is an inline comment

SELECT book FROM library; -- this is an inline comment

SELECT book FROM library; /* this is an inline comment */

SELECT book FROM library /* this is an inline comment */ WHERE book = "Ulysses";

Multiline comments

Use a multiline comment if you need the comment to span multiple lines. Nested multiline comments are not supported.

Examples

SELECT book FROM library
/*
  This is a multiline comment
  on multiple lines
*/
WHERE book = "Ulysses";

SELECT book FROM library
/* this is a multiline comment
on two lines */
WHERE book = "Ulysses";

Lexical structure and syntax

Identifiers

Unquoted identifiers

Quoted identifiers

Identifier examples

Path expressions

Table names

Column names

Field names

Literals

String and bytes literals

Formats for quoted literals

Escape sequences for string and bytes literals

Integer literals

NUMERIC literals

BIGNUMERIC literals

Floating point literals

Array literals

Struct literals

Date literals

Time literals

Datetime literals

Timestamp literals

Time zone

Range literals

Interval literals

Interval literal with a single datetime part

Interval literal with a datetime part range

JSON literals

Case sensitivity

Reserved keywords

Terminating semicolons

Trailing commas

Query parameters

Named query parameters

Positional query parameters

Comments

Single-line comments

Inline comments

Multiline comments

`NUMERIC` literals

`BIGNUMERIC` literals