Cloud Logging에서는 상태, 성능, 통합 버전, 요청 및 응답 파라미터, 트리거 및 태스크 구성과 같은 통합 세부정보가 포함된 통합 실행 로그를 볼 수 있습니다. Cloud Logging의 실행 로그에 대한 자세한 내용은 Cloud Logging의 통합 실행 로그를 참조하세요. 제한사항과 가격 책정에 대한 자세한 내용은 제한사항 및 가격 책정을 참조하세요.
기본적으로 Cloud Logging은 통합에 대해 사용 중지되어 있습니다. 통합의 게시되지 않은 버전을 수정하여 통합에 로깅을 사용 설정할 수 있습니다.
시작하기 전에
Cloud Logging에 통합 실행 로그를 저장하려면 먼저 통합에 Cloud Logging을 사용 설정해야 합니다. 단계는 다음과 같습니다.
Google Cloud 콘솔에서 Application Integration 페이지로 이동합니다.
탐색 메뉴에서 로그를 클릭한 후 Cloud Logging 필드에서 보기를 클릭합니다. Cloud Logging이 사용 설정되면 이 필드에는 Cloud Logging에서 로그를 볼 수 있는 링크가 제공됩니다. Cloud Logging이 사용 설정되지 않으면 이 필드는 사용 중지됨으로 설정됩니다.
Cloud Logging은 크기가 최대 256KiB인 로그 항목만 지원합니다. 로그가 이 한도를 초과하면 요청 및 응답 매개변수가 로깅 세부정보에 표시되지 않습니다. Cloud Logging 할당량 및 한도에 대한 자세한 내용은 할당량 및 한도를 참조하세요. 이 오류를 해결하려면 값이 한도를 초과하지 않도록 통합 변수를 업데이트합니다. 또는 Application Integration에서 이러한 로그를 확인할 수도 있습니다.
로컬 로깅이 사용 중지된 경우 Cloud Logging이 사용 설정되어 있어도 실행 로그가 Cloud Logging으로 전송되지 않습니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-04(UTC)"],[[["\u003cp\u003eCloud Logging, when enabled, allows you to view integration execution logs, including details on status, performance, version, request/response parameters, and configurations.\u003c/p\u003e\n"],["\u003cp\u003eTo enable Cloud Logging for an integration, you need to access the integration settings in the draft version and toggle the "Enable Cloud Logging" option, selecting a severity level (Info, Error, or Warning).\u003c/p\u003e\n"],["\u003cp\u003eLogs can be accessed through the Application Integration page in the Google Cloud console, either through the Logs section or directly from the integration editor after testing.\u003c/p\u003e\n"],["\u003cp\u003eSpecific logs can be viewed by using queries based on execution ID, integration name, or status (e.g., failed executions), and parameters.\u003c/p\u003e\n"],["\u003cp\u003eThere are limitations to consider when using Cloud Logging, such as a maximum log entry size of 256 KiB and the requirement for local logging to be enabled for Cloud Logging to receive the execution logs.\u003c/p\u003e\n"]]],[],null,["# View logs in Cloud Logging\n\nSee the [supported connectors](/integration-connectors/docs/connector-reference-overview) for Application Integration.\n\nView logs in Cloud Logging\n==========================\n\nIn Cloud Logging, you can view the Integration execution logs containing integration details, such as status, performance, integration version, request and response parameters, and the trigger and task configurations. For more information about execution logs in Cloud Logging, see [Integration execution logs in Cloud Logging](/application-integration/docs/introduction-logs#cloud-logs). For information about limitations and pricing, see [Limitations](#limitations) and [Pricing](#pricing).\n\nBy default, Cloud Logging is disabled for integrations. You can [enable\nlogging for an integration](#before-you-begin) by editing the unpublished version of the integration.\n\nBefore you begin\n----------------\n\nTo store integration execution logs in Cloud Logging, you must first enable Cloud Logging for your integration. To do so, follow these steps:\n\n1. In the Google Cloud console, go to the **Application Integration** page.\n\n [Go to Application Integration](https://console.cloud.google.com/integrations)\n2. In the navigation menu, click **Integrations** .\n\n The **Integrations** page appears listing all the integrations available in the Google Cloud project.\n3. Select an existing integration or [create a new integration](/application-integration/docs/create-integrations) for which you want to enable Cloud Logging.\n\n This opens the integration in the *integration editor*.\n4. Select the `DRAFT` version of your integration. You can't modify the settings for a published or an unpublished version that isn't in the draft mode. For a list of integration versions, see [Versions](/application-integration/docs/integration-versions).\n5. Click settings (**Integration summary**) in the designer toolbar. The integration summary page appears.\n 1. In the **Log settings** , click the **Enable Cloud Logging** toggle and then from the **Severity** list, select the severity type of the logs that you want to store in Cloud Logging:\n - **Info** : Select this option to capture all execution statuses: `SUCCEEDED`, `FAILED`, `PROCESSING`, `PENDING`, `SUSPENDED`, `RETRY_ON_HOLD`, and `CANCELLED`.\n - **Error** : Select this option to capture the following execution statuses: `FAILED` and `CANCELLED`.\n - **Warning** : Select this option to capture the following execution statuses: `FAILED` and `CANCELLED`. **Note:** Currently, both **Error** and **Warning** severity levels capture `FAILED` and `CANCELLED` execution states.\n - For a list of integration execution states, see [Execution states](/application-integration/docs/reference/rest/v1/projects.locations.integrations.executions#state).\n 2. Click **Save**.\n\nView logs\n---------\n\nTo view logs in Cloud Logging, you must first [enable Cloud Logging](/application-integration/docs/before-you-begin) and then follow these steps:\n\n1. In the Google Cloud console, go to the **Application Integration** page.\n\n [Go to Application Integration](https://console.cloud.google.com/integrations)\n2. To view the integration execution logs in Cloud Logging, use one of the following methods:\n - In the navigation menu, click **Logs** , and then, click **View Cloud Logs**.\n - In the navigation menu, click **Logs** , and then in the **Cloud Logging** field, click **View** . If Cloud Logging is enabled, this field provides a link to view logs in Cloud Logging. If Cloud Logging is not enabled, this field is set to **Disabled**.\n - In the Integration editor, after you [test an integration](/application-integration/docs/test-publish-integrations), in the **Test integration** pane, click **View Cloud Logs**.\n\n The **Logs Explorer** page appears. Logs are displayed for the last three hours for the following default query: \n\n ```\n resource.type=integrations.googleapis.com/IntegrationVersion\n ```\n3. To understand the log format of [Application Integration logs](/logging/docs/api/platform-logs#application_integration), see the [`log_entries` payload](https://github.com/googleapis/googleapis/blob/master/google/cloud/integrations/v1alpha/log_entries.proto).\n\nSample queries\n--------------\n\nYou can use the following queries to view logs in Cloud Logging:\n\n- To view all integration execution logs:\n\n ```\n resource.type=\"integrations.googleapis.com/IntegrationVersion\"\n \n ```\n- You can view integration execution logs for a specific execution ID:\n\n - Searches only the parents executions with the given execution ID: \n\n ```\n resource.type=\"integrations.googleapis.com/IntegrationVersion\"\n jsonPayload.executionId=\"EXECUTION_ID\u003cvar translate=\"no\"\u003e\"\n \u003c/var\u003e\n ```\n - Searches for both parent and child executions launched from the given execution ID: \n\n ```\n resource.type=\"integrations.googleapis.com/IntegrationVersion\"\n \"EXECUTION_ID\u003cvar translate=\"no\"\u003e\"\n \u003c/var\u003e\n ```\n- To view integration execution logs for a specific integration:\n\n ```\n resource.type=\"integrations.googleapis.com/IntegrationVersion\" \n \"INTEGRATION_NAME\"\n ```\n Or \n\n ```\n resource.type=\"integrations.googleapis.com/IntegrationVersion\"\n jsonPayload.integration=\"INTEGRATION_NAME\u003cvar translate=\"no\"\u003e\"\n \u003c/var\u003e\n ```\n- To view failed integration executions for a specific integration:\n\n ```\n resource.type=\"integrations.googleapis.com/IntegrationVersion\"\n jsonPayload.integrationExecutionDetails.integrationExecutionState=\"FAILED\"\n jsonPayload.integration=\"INTEGRATION_NAME\u003cvar translate=\"no\"\u003e\"\n \u003c/var\u003e\n ```\n- To view logs with specific request param name. For example, the following query requests logs for the `requestUrl` parameter:\n\n ```\n resource.type=\"integrations.googleapis.com/IntegrationVersion\"\n \"requestUrl\"\n ```\n- For more sample queries, see [Cloud Logging sample queries](/logging/docs/view/query-library).\n\n\u003cbr /\u003e\n\nLimitations\n-----------\n\nIntegration logs in Cloud Logging are subject to the following limitations:\n\n- Cloud Logging only supports log entries that are up to 256 KiB in size. If your logs exceed this limit, the request and response parameters are not shown in the logging details. For information about Cloud Logging quotas and limits, see [Quotas and limits](/logging/quotas). To resolve this error, update the integration variables so that the value doesn't exceed the limit. Alternatively, you can also [view these logs in Application Integration](/application-integration/docs/integration-execution-logs).\n- If [local logging](/application-integration/docs/local-logging) is disabled, the execution logs are not sent to Cloud Logging even if Cloud Logging is enabled.\n\nPricing\n-------\n\nFor information about pricing for Cloud Logging, see [Cloud Logging pricing](/stackdriver/pricing#logging-costs).\n\nWhat's next\n-----------\n\n- Learn about [execution logs in Cloud Logging](/application-integration/docs/introduction-logs#cloud-logs).\n- Learn how to [query and view logs](/logging/docs/log-analytics).\n- Learn about [log based metrics](/logging/docs/logs-based-metrics).\n- Learn how logs are stored, routed and how you can [export to different destinations](/logging/docs/routing/overview).\n- Learn how to [create alerts on log-based metrics](/logging/docs/logs-based-metrics/charts-and-alerts)."]]
