Documentation de référence sur le fichier de configuration de l'exemple d'Anthos en mode déconnecté

Les exemples de fichiers de configuration suivants peuvent être utilisés avec le mode déconnecté d'Anthos pour comprendre les API de produit permettant de gérer les clusters ou de configurer les fonctionnalités Anthos.

Cluster d'administration et pool de nœuds

Voici un exemple de fichier de configuration de cluster d'administrateur Anthos en mode déconnecté.

Remarques sur l'exemple :

Les variables de configuration actl figurant au début du fichier sont des fichiers YAML valides, mais pas des ressources Kubernetes valides. Elles ne peuvent être incluses que si vous utilisez actl pour créer le cluster d'administrateur initial.
Le nom du cluster doit être nommé admin.
Le champ spec.type doit être admin.
Les paramètres de configuration ne sont pas compatibles avec l'expansion de l'interface système. Les chemins absolus doivent être spécifiés.

# actl configuration variables. Because this section is valid YAML but not a
# valid Kubernetes resource, this section can only be included when using actl
# to create the initial admin cluster. Afterwards, when creating user clusters
# by directly applying the cluster and node pool resources to the existing admin
# cluster, you must remove this section.
#
sshPrivateKeyPath: <path to SSH private key, used for node access>
registryMirrors:
# Registry endpoint to pull images from. If the registry has a namespace append
# 'v2' after the registry ip or hostname.
# Example: https://registry.example.com/v2/library
- endpoint: <private registry>
  # Example: /home/USER/.docker/config.json
  pullCredentialConfigPath: <private registry config file>
  # Not needed for trusted domain.
  # Example: /etc/docker/certs.d/registry.example.com/ca.crt
  caCertPath: <private registry TLS cert>
---
apiVersion: v1
kind: Namespace
metadata:
  name: cluster-admin
---
apiVersion: baremetal.cluster.gke.io/v1
kind: Cluster
metadata:
  name: admin
  namespace: cluster-admin
  annotations:
    baremetal.cluster.gke.io/private-mode: "true"
spec:
  # Cluster type. This can only be admin for an admin cluster.
  type: admin
  # Anthos cluster version.
  anthosBareMetalVersion: 1.11.3
  # NodeConfig specifies the configuration that applies to all nodes in the cluster.
  nodeConfig:
    containerRuntime: containerd
  # Control plane configuration
  controlPlane:
    nodePoolSpec:
      nodes:
      # Control plane node pools. Typically, this is either a single machine
      # or 3 machines if using a high availability deployment.
      - address: <Machine 1 IP>
  # Cluster networking configuration
  clusterNetwork:
    # Pods specify the IP ranges from which Pod networks are allocated.
    pods:
      cidrBlocks:
      - 192.168.0.0/16
    # Services specify the network ranges from which service VIPs are allocated.
    # This can be any RFC 1918 range that does not conflict with any other IP range
    # in the cluster and node pool resources.
    services:
      cidrBlocks:
      - 10.96.0.0/12
  # Load balancer configuration
  loadBalancer:
    # Load balancer mode can only be 'bundled'.
    # In 'bundled' mode a load balancer will be installed on load balancer nodes during cluster creation.
    mode: bundled
    # Load balancer port configuration
    ports:
      # Specifies the port the LB serves the kubernetes control plane on.
      # In 'manual' mode the external load balancer must be listening on this port.
      controlPlaneLBPort: 443
    # The VIPs must be in the same subnet as the load balancer nodes.
    vips:
      # ControlPlaneVIP specifies the VIP to connect to the Kubernetes API server.
      # This address must not be in the address pools below.
      controlPlaneVIP: <control plane VIP>
    # AddressPools is a list of non-overlapping IP ranges for the data plane load balancer.
    # All addresses must be in the same subnet as the load balancer nodes.
    # Address pool configuration is only valid for 'bundled' LB mode in non-admin clusters.
    addressPools:
    - name: pool1
      addresses:
      # Each address must be either in the CIDR form (1.2.3.0/24)
      # or range form (1.2.3.1-1.2.3.5).
      - <VIP address pools>
    # A load balancer nodepool can be configured to specify nodes used for load balancing.
    # These nodes are part of the kubernetes cluster and run regular workloads as well as load balancers.
    # If the node pool config is absent then the control plane nodes are used.
    # It's recommended to have the LB node pool for non-admin clusters.
    # Node pool configuration is only valid for 'bundled' LB mode.
    # nodePoolSpec:
    #  nodes:
    #   - address: <Machine 1 IP>
  # Proxy configuration
  # proxy:
  #   url: http://[username:password@]domain
  #   # A list of IPs, hostnames or domains that should not be proxied.
  #   noProxy:
  #   - 127.0.0.1
  #   - localhost
  # Storage configuration
  storage:
    # lvpNodeMounts specifies the config for local PersistentVolumes backed by mounted disks.
    # These disks need to be formatted and mounted by the user, which can be done before or after
    # cluster creation.
    lvpNodeMounts:
      # path specifies the host machine path where mounted disks will be discovered and a local PV
      # will be created for each mount.
      path: /mnt/localpv-disk
      # storageClassName specifies the StorageClass that PVs will be created with. The StorageClass
      # is created during cluster creation.
      storageClassName: local-disks
    # lvpShare specifies the config for local PersistentVolumes backed by subdirectories in a shared filesystem.
    # These subdirectories are automatically created during cluster creation.
    lvpShare:
      # path specifies the host machine path where subdirectories will be created on each host. A local PV
      # will be created for each subdirectory.
      path: /mnt/localpv-share
      # storageClassName specifies the StorageClass that PVs will be created with. The StorageClass
      # is created during cluster creation.
      storageClassName: local-shared
      # numPVUnderSharedPath specifies the number of subdirectories to create under path.
      numPVUnderSharedPath: 5
  # Node access configuration; to use a non-root user with passwordless sudo capability for machine login.
  nodeAccess:
    loginUser: <login user name>
---
# Node pools for worker nodes
apiVersion: baremetal.cluster.gke.io/v1
kind: NodePool
metadata:
  name: node-pool-1
  namespace: cluster-admin
spec:
  clusterName: admin
  nodes:
  - address: <Machine 2 IP>
  - address: <Machine 3 IP>

Cluster utilisateur et pool de nœuds

Voici un exemple de fichier de configuration de cluster utilisateur d'Anthos en mode privé.

Pour en savoir plus sur Anthos on bare metal, consultez la page https://cloud.google.com/anthos/clusters/docs/bare-metal.

Remarques :

très semblable au cluster d'administration, mais avec des valeurs par défaut différentes.
vous pouvez appliquer directement les ressources de cluster et de pool de nœuds au cluster administrateur.

apiVersion: v1
kind: Namespace
metadata:
  name: cluster-<cluster-name>
---
apiVersion: baremetal.cluster.gke.io/v1
kind: Cluster
metadata:
  name: <cluster-name>
  namespace: cluster-<cluster-name>
  annotations:
    baremetal.cluster.gke.io/private-mode: "true"
spec:
  # Cluster type. This can only be user for a user cluster.
  type: user
  # Anthos cluster version.
  anthosBareMetalVersion: 1.11.3
  # NodeConfig specifies the configuration that applies to all nodes in the cluster.
  nodeConfig:
    containerRuntime: containerd
  # Control plane configuration
  controlPlane:
    nodePoolSpec:
      nodes:
      # Control plane node pools. Typically, this is either a single machine
      # or 3 machines if using a high availability deployment.
      - address: <Machine 4 IP>
  # Cluster networking configuration
  clusterNetwork:
    # Pods specify the IP ranges from which Pod networks are allocated.
    pods:
      cidrBlocks:
      - 192.168.0.0/16
    # Services specify the network ranges from which service VIPs are allocated.
    # This can be any RFC 1918 range that does not conflict with any other IP range
    # in the cluster and node pool resources.
    services:
      cidrBlocks:
      - 10.96.0.0/12
  # Credentials specify the secrets that hold SSH key and image pull credential for the new cluster.
  # credentials:
  #  # Optionally override default ssh key secret inherited from the admin cluster.
  #  sshKeySecret:
  #    name: SSH_KEY_SECRET
  #    namespace: cluster-<cluster-name>
  #  # Optionally override default image pull secret inherited from the admin cluster.
  #  imagePullSecret:
  #    name: IMAGE_PULL_SECRET
  #    namespace: cluster-<cluster-name>
  # Load balancer configuration
  loadBalancer:
    # Load balancer mode can only be 'bundled'.
    mode: bundled
    # Load balancer port configuration
    ports:
      # Specifies the port the LB serves the kubernetes control plane on.
      # In 'manual' mode the external load balancer must be listening on this port.
      controlPlaneLBPort: 443
    # The VIPs must be in the same subnet as the load balancer nodes.
    vips:
      # ControlPlaneVIP specifies the VIP to connect to the Kubernetes API server.
      # This address must not be in the address pools below.
      controlPlaneVIP: <control plane VIP>
    # AddressPools is a list of non-overlapping IP ranges for the data plane load balancer.
    # All addresses must be in the same subnet as the load balancer nodes.
    # Address pool configuration is only valid for 'bundled' LB mode in non-admin clusters.
    addressPools:
    - name: pool1
      addresses:
      # Each address must be either in the CIDR form (1.2.3.0/24)
      # or range form (1.2.3.1-1.2.3.5).
      - <VIP address pools>
    # A load balancer nodepool can be configured to specify nodes used for load balancing.
    # These nodes are part of the kubernetes cluster and run regular workloads as well as load balancers.
    # If the node pool config is absent then the control plane nodes are used.
    # Node pool configuration is only valid for 'bundled' LB mode.
    # nodePoolSpec:
    #  nodes:
    #  - address: <Machine 7 IP>
  # Proxy configuration
  # proxy:
  #   url: http://[username:password@]domain
  #   # A list of IPs, hostnames or domains that should not be proxied.
  #   noProxy:
  #   - 127.0.0.1
  #   - localhost
  # Storage configuration
  storage:
    # lvpNodeMounts specifies the config for local PersistentVolumes backed by mounted disks.
    # These disks need to be formatted and mounted by the user, which can be done before or after
    # cluster creation.
    lvpNodeMounts:
      # path specifies the host machine path where mounted disks will be discovered and a local PV
      # will be created for each mount.
      path: /mnt/localpv-disk
      # storageClassName specifies the StorageClass that PVs will be created with. The StorageClass
      # is created during cluster creation.
      storageClassName: local-disks
    # lvpShare specifies the config for local PersistentVolumes backed by subdirectories in a shared filesystem.
    # These subdirectories are automatically created during cluster creation.
    lvpShare:
      # path specifies the host machine path where subdirectories will be created on each host. A local PV
      # will be created for each subdirectory.
      path: /mnt/localpv-share
      # storageClassName specifies the StorageClass that PVs will be created with. The StorageClass
      # is created during cluster creation.
      storageClassName: local-shared
      # numPVUnderSharedPath specifies the number of subdirectories to create under path.
      numPVUnderSharedPath: 5
  # Node access configuration; to use a non-root user with passwordless sudo capability for machine login.
  nodeAccess:
    loginUser: <login user name>
---
# Node pools for worker nodes
apiVersion: baremetal.cluster.gke.io/v1
kind: NodePool
metadata:
  name: <cluster-name>-worker-node-pool
  namespace: cluster-<cluster-name>
spec:
  clusterName: <cluster-name>
  nodes:
  - address: <Machine 5 IP>
  - address: <Machine 6 IP>

Opérateur administrateur

Voici un exemple de fichier de configuration pour l'opérateur administrateur d'Anthos en mode déconnecté. Ce fichier de configuration contrôle le centre de gestion.

apiVersion: managementcenter.anthos.cloud.google.com/v1
kind: AdminOperator
metadata:
  name: admin-operator
spec:
  billingInfo:
    projectNumber: <your Google Cloud Platform project number>
    # FreeTrialExpiration indicates if the project has a free trial and the time
    # when that free trial ends. Format: date-time in RFC 3339.
    # It's not a free trial by default when not specified.
    # freeTrialExpiration: <2021-07-01T00:00:00Z>
  # UpdateConfigOverride can be optionally provided to override the default
  # update configuration for components.
  # All the components will be running on the same version as the admin operator
  # by default, unless an override is set via this field.
  updateConfigOverride:
    policies:
    - name: "<component name, for example: anthos-config-management>"
      versionConstraint: "<=1.9.0"

InventoryMachine

Voici un exemple de fichier de configuration InventoryMachine pour Anthos en mode déconnecté. Ce fichier est appliqué à un cluster d'administrateur et fournit les machines nécessaires à la création du cluster d'utilisateur.

apiVersion: baremetal.cluster.gke.io/v1alpha1
kind: InventoryMachine
metadata:
  name: <Machine IP address>
  # Optional: used by the Management Center to inform customers
  labels:
    key1: value1
    key2: value2
spec:
  # Address specifies the default IPv4 address for SSH access and Kubernetes node.
  # Routable from the admin cluster.
  # Example: 192.168.0.1
  # This field is immutable.
  # This field is required.
  address: <Machine IP address>

AddressPool

Voici un exemple de fichier de configuration AddressPool pour Anthos en mode déconnecté. Ce fichier est appliqué au cluster d'administrateur et fournit les adresses IP virtuelles nécessaires pour créer un cluster d'utilisateurs.

apiVersion: managementcenter.anthos.cloud.google.com/v1
kind: AddressPool
metadata:
  # Don't change the name, only `anthos-addresspool-default` allowed.
  name: anthos-addresspool-default
spec:
  description: <description text>
  addresses:
  # All addresses below are a list of non-overlapping IP ranges.
  # Address Range, must be in the single IP address form (1.2.3.4),
  # CIDR form (1.2.3.0/24) or range form (1.2.3.1-1.2.3.5).
  - <VIP address range>
  - <VIP address>

BootstrapService

Voici un exemple de fichier de configuration BootstrapService pour Anthos en mode déconnecté. Le fichier est appliqué au cluster administrateur et fournit les services d'amorçage nécessaires à la création de clusters utilisateur (par exemple, un fournisseur de stockage tiers ou un pilote de GPU).

Vous pouvez créer le ConfigMap via kubectl create configmap <name of configmap> --from-file=<name of manifest>.yaml.

apiVersion: managementcenter.anthos.cloud.google.com/v1
kind: BootstrapService
metadata:
  name: <name of the bootstrap service>
  namespace: anthos-management-center
spec:
  # If set to True, this configuration can be applied to many user clusters,
  # e.g. a GPU driver configuration. If False, this configuration can only be
  # applied to a single user cluster, e.g. a CSI Driver + StorageClass
  # combination which is intended for exclusive use by a single user cluster.
  # Defaults to False.
  isReusable: False
  configMapRef:
    name: <name of configmap>
    namespace: anthos-management-center

BootstrapServiceBinding

Voici un exemple de fichier de configuration BootstrapServiceBinding pour Anthos en mode déconnecté. Le fichier est appliqué à un cluster d'administrateur et lie BootstrapService aux clusters cibles lors de leur création.

apiVersion: managementcenter.anthos.cloud.google.com/v1
kind: BootstrapServiceBinding
metadata:
  name: <name of the bootstrap service binding>
  namespace: anthos-management-center
spec:
  configs:
  - configRef:
      name: <name of the bootstrap service>
      namespace: anthos-management-center
    placement:
      clusterIDs:
      - "<cluster-name>"

ConfigManagementFeatureSpec

Voici un exemple de fichier de configuration ConfigManagementFeatureSpec pour Anthos en mode déconnecté. Ce fichier est appliqué au cluster administrateur et fournit les définitions de spécifications pour Anthos Config Management.

Pour en savoir plus sur Anthos Config Management, consultez la page https://cloud.google.com/anthos/config-management.

apiVersion: managementcenter.anthos.cloud.google.com/v1
kind: ConfigManagementFeatureSpec
metadata:
  name: <name of config management spec>
  namespace: anthos-management-center
spec:
  version: "1.7.1"
  git:
    syncRepo: "git@<YOUR_GIT_REPO>.git"
    policyDir: "."
    secretType: "ssh"
    syncBranch: "master"
    syncRev: "HEAD"
    syncWait: 15

  # See https://cloud.google.com/kubernetes-engine/docs/add-on/config-sync/how-to/unstructured-repo
  # for the difference between `hierarchy` and `unstructured` source format.
  sourceFormat: unstructured

  # See https://cloud.google.com/anthos-config-management/docs/concepts/policy-controller
  # for more about Policy Controller.
  policyController:
    enabled: true

  # See https://cloud.google.com/kubernetes-engine/docs/add-on/config-sync/concepts/hierarchy-controller
  # for more background regarding Hierarchy Controller.
  hierarchyController:
    enabled: true

  # [Optional] The Secret on the admin cluster to access the config-management repo.
  # If set, the secret referenced will be copied to user clusters to allow ACM to access the Git repo.
  # If not set, users will need to create the Git credential secret on the user cluster by themselves.
  secretRef:
    name: git-creds
    namespace: anthos-management-center

ConfigManagementBinding

Voici un exemple de fichier de configuration ConfigManagementBinding pour Anthos en mode déconnecté. Ce fichier est appliqué au cluster administrateur et installe Anthos Config Management sur les clusters d'utilisateur.

apiVersion: managementcenter.anthos.cloud.google.com/v1
kind: ConfigManagementBinding
metadata:
  name: <name of config management binding>
  namespace: anthos-management-center
spec:
  configs:
  - configRef:
      name: <name of config management spec>
      namespace: anthos-management-center
    placement:
      clusterIDs:
      - "<cluster-name>"

ServiceMeshFeatureSpec

Voici un exemple de fichier de configuration ServiceMeshFeatureSpec pour Anthos en mode déconnecté. Ce fichier est appliqué au cluster administrateur et fournit les définitions de spécifications pour Anthos Service Mesh.

Pour en savoir plus, consultez la documentation Anthos Service Mesh à l'adresse suivante : https://cloud.google.com/anthos/service-mesh.

apiVersion: managementcenter.anthos.cloud.google.com/v1alpha1
kind: ServiceMeshFeatureSpec
metadata:
  name: <name of service mesh spec>
  namespace: anthos-management-center
spec:
  version: 1.9.6-asm.1

ServiceMeshBinding

Voici un exemple de fichier de configuration ServiceMeshBinding pour Anthos en mode déconnecté. Ce fichier est appliqué au cluster administrateur et installe Anthos Service Mesh sur les clusters d'utilisateur.

apiVersion: managementcenter.anthos.cloud.google.com/v1alpha1
kind: ServiceMeshBinding
metadata:
  name: <name of service mesh binding>
  namespace: anthos-management-center
spec:
  configs:
  - configRef:
      name: <name of service mesh spec>
      namespace: anthos-management-center
    placement:
      clusterIDs:
      - "<cluster-name>"

Anthos Identity Service

Voici un exemple de fichier de configuration "ClientConfig" d'Anthos en mode mode 'ClientConfig' config file.

Ce fichier est appliqué au cluster administrateur et permet d'identifier le client.

apiVersion: authentication.gke.io/v2alpha1
kind: ClientConfig
spec:
  authentication:
  - name: https://accounts.google.com
    oidc:
      clientID: <redacted>
      clientSecret: <redacted>
      cloudConsoleRedirectURI: http://cloud.console.not.enabled
      extraParams: prompt=consent,access_type=offline
      issuerURI: https://accounts.google.com
      kubectlRedirectURI: http://localhost:9879/callback
      scopes: email
      userClaim: email
  certificateAuthorityData: <DO NOT CHANGE>
  name: <DO NOT CHANGE>
  server: <DO NOT CHANGE>

DomainConfig

Voici un exemple de fichier de configuration DomainConfig pour Anthos en mode déconnecté. Ce fichier est appliqué au cluster d'administrateur et permet de configurer le nom de la méthode d'authentification et le certificat permettant de sécuriser la connexion HTTPS aux points de terminaison Web Anthos en mode déconnecté à utiliser pour le nom de domaine. Cette configuration permet de rediriger automatiquement les requêtes non authentifiées vers la page de connexion correspondante en fonction du nom de domaine utilisé dans la requête.

apiVersion: managementcenter.anthos.cloud.google.com/v1
kind: DomainConfig
metadata:
  # name is the domain name used to serve the Anthos web endpoints.
  # This should be a valid fully qualified domain name.
  # It should not include the protocol such as http or https.
  # Example of incorrect domain names: http://anthos, anthos, anthos*.com
  # Example of correct domain names: anthos.example.com
  name: <name of the domain>
spec:
  # authMethodName is the name of the authentication configured
  # in the Anthos Identity Service's ClientConfig that should be used for
  # this domain name.
  authMethodName: <name in ClientConfig.Spec.Authentication.Name>

  # If not specified, a self-signed certificate (untrusted) will be used.
  # To configure the TLS certificate, copy the certificate in a secret in
  # istio-system namespace and reference the name of the secret in certSecretName.
  # The referred secret must be of the type "kubernetes.io/tls".
  # The referred secret must in istio-system namespace.
  certSecretName: <cert secret name>

Logmon et ConfigMaps pour les configurations supplémentaires

L'exemple de fichier de configuration Logmon suivant est utilisé en mode déconnecté pour gérer la surveillance et la journalisation dans les clusters.

Remarques sur l'exemple :

Le name de la ressource Logmon doit être logmon-default.
Le namespace de la ressource Logmon doit être kube-system.
La syntaxe des configurations dans les ConfigMaps répertoriés dans fluentbitConfigmaps doit suivre les plug-ins de sortie fluides.
La syntaxe des configurations dans les ConfigMaps répertoriées dans la règle alertmanagerConfigurationConfigmaps doit respecter la configuration du gestionnaire d'alertes.
La syntaxe des configurations dans les ConfigMaps répertoriés dans prometheusRulesConfigmaps doit respecter les règles d'enregistrement Prometheus et les règles d'alerte Prometheus.

apiVersion: addons.gke.io/v1alpha1
kind: Logmon
metadata:
  # Don't change the name
  name: logmon-default
  # Don't change the namespace
  namespace: kube-system
spec:
  system_logs:
    outputs:
      additionalOutput:
        fluentbitConfigmaps:
        # Same syntax as fluent-bit output plugins, see 'Sample fluentbitConfigmaps' below as example
        - "<customized-system-logs-fluent-bit-output-config>"
        # Scheme: []v1.VolumeMount
        volumeMounts:
        - ...
        - ...
        # Scheme: []v1.Volume
        volumes:
        - ...
        - ...
      default_loki:
        deployment:
          components:
            loki:
              storageSize: 20Gi # "<storage-size>"
          retentionPolicy:
            retentionTime: 720h # "<retention-time>"
          storageClassName: anthos-system # "<storage-class-name>"
  system_metrics:
    outputs:
      default_prometheus:
        deployment:
          components:
            alertmanager:
              alertmanagerConfigurationConfigmaps:
              # Same syntax as alertmanager configuration, see 'Sample alertmanagerConfigurationConfigmaps' below as example
              - "<customized-alertmanager-configmap-name>"
              storageSize: 1Gi # "<storage-size>"
            grafana:
              storageSize: 1Gi # "<storage-size>"
            prometheus:
              prometheusRulesConfigmaps:
              # Same syntax as prometheus recording rules and prometheus alerting rules, see 'Sample prometheusRulesConfigmaps' below as example
              - "<customized-prometheus-rules-configmap-name>"
              storageSize: 20Gi # "<storage-size>"
          retentionPolicy:
            retentionTime: 720h # "<retention-time>"
          storageClassName: anthos-system # "<storage-class-name>"

Exemple de fluentbitConfigmaps

Remarques sur l'exemple :

La valeur namespace doit être kube-system.
Le libellé logmon est obligatoire.
La clé de la ConfigMap doit être output.conf.

apiVersion: v1
kind: ConfigMap
metadata:
  name: <customized-system-logs-fluent-bit-output-config>
  # Don't change the namespace
  namespace: kube-system
  labels:
    # This label is required.
    logmon: system_logs
data:
  # The file name must be output.conf
  output.conf: |
    # Please fill customized fluent-bit output plugin configuration below
    [OUTPUT]
        Name: stdout
        Match: *

Exemple d'alertemanagerConfigurationConfigmaps

Remarques sur l'exemple :

La valeur namespace doit être kube-system.
Le libellé logmon est obligatoire.
La clé de la ConfigMap doit être alertmanager.yml.

apiVersion: v1
kind: ConfigMap
metadata:
  name: <customized-alertmanager-configmap-name>
  # Don't change the namespace
  namespace: kube-system
  labels:
    # This label is required.
    logmon: system_metrics
data:
  # The file name must be alertmanager.yml
  alertmanager.yml: |
    # Please fill customized alertmanager configuration below
    global:
      # Also possible to place this URL in a file.
      # Ex: `slack_api_url_file: '/etc/alertmanager/slack_url'`
      slack_api_url: '<slack_webhook_url>'

    route:
      receiver: 'slack-notifications'
      group_by: [alertname, datacenter, app]

    receivers:
    - name: 'slack-notifications'
    slack_configs:
    - channel: '#alerts'
        text: 'https://internal.myorg.net/wiki/alerts/'

Exemple de prometheusRulesConfigmaps

Remarques sur l'exemple :

La valeur namespace doit être kube-system.
Le libellé logmon est obligatoire.
Si plusieurs ConfigMaps sont répertoriés sous prometheusRulesConfigmaps dans la ressource Logmon, les clés doivent être uniques pour toutes les ConfigMaps.

apiVersion: v1
kind: ConfigMap
metadata:
  name: <customized-prometheus-rules-configmap-name>
  # Don't change the namespace
  namespace: kube-system
  labels:
    # This label is required.
    logmon: system_metrics
data:
  # The file name must be unique across all customized prometheus rule files.
  <a-unique-file-name>: |
   # Please fill customized recording rules below
   groups:
    - name: kubernetes-apiserver
      rules:
      - alert: KubeAPIDown
        annotations:
          message: KubeAPI has disappeared from Prometheus target discovery.
          runbook_url: https://github.com/kubernetes-monitoring/kubernetes-mixin/tree/master/runbook.md#alert-name-kubeapidown
        expr: |
          absent(up{job="kube-apiserver"} == 1)
        for: 15m
        labels:
          severity: critical

  # The file name must be unique across all customized prometheus rule files.
  <a-unique-file-name>: |
    # Please fill customized alerting rules below
   groups:
    - name: node.rules
      rules:
      - expr: |
          topk by(cluster, namespace, pod) (1,
            max by (cluster, node, namespace, pod) (
              label_replace(kube_pod_info{job="kube-state-metrics",node!=""}, "pod", "$1", "pod", "(.*)")
          ))
        record: 'node_namespace_pod:kube_pod_info:'