This page describes access control with Identity and Access Management (IAM) in Artifact Registry.
Default permissions for Artifact Registry minimize setup effort when implementing a CI/CD pipeline. You can also integrate Artifact Registry with third-party CI/CD tools and configure the permissions and authentication required to access repositories.
If you use Artifact Analysis to work with container metadata, such as vulnerabilities found in images, see the Artifact Analysis documentation for information about granting access to view or manage metadata.
Before you begin
- Enable Artifact Registry, including enabling the API and installing the Google Cloud CLI.
- If you want to apply repository-specific permissions, then create an Artifact Registry repository for your packages.
Overview
IAM permissions and roles determine your ability to create, view, edit, or delete data in an Artifact Registry repository.
A role is a collection of permissions. You can't grant a principal permissions directly; instead, you grant them a role. When you grant a role to a principal, you grant them all the permissions that the role contains. You can grant multiple roles to the same principal.
Google Cloud default permissions
By default, the following permissions apply to Google Cloud CI/CD services in the same project as Artifact Registry:
- Cloud Build permissions include permissions to upload and download artifacts.
- Compute Engine, supported Google Kubernetes Engine versions, and Cloud Run use the Compute Engine default service account, which has read-only access to storage.
If all your services are in the same Google Cloud project and the default permissions meet your needs, you don't need to configure permissions.
You must configure Artifact Registry permissions for these services if:
- You want to use these services to access Artifact Registry in another project. In the project with Artifact Registry, grant the workload identity pool or service account for each service the required role. If connecting to Cloud Run, grant the Cloud Run Service Agent the required role.
- you're using a GKE version that does not have built-in support for pulling images from Artifact Registry. See the GKE section for configuration instructions.
- You want the default service account to have read and write access to repositories. See the following information for details:
- you're using a user-provided service account for your runtime environments instead of the default service account. In the project with Artifact Registry, grant your service account the required role.
Third-party integration
For third-party clients, you must configure both permissions and authentication.
Traditionally, applications running outside Google Cloud use service account keys to access Google Cloud resources. However, service account keys are powerful credentials, and can present a security risk if they are not managed correctly.
Workload Identity Federation lets you use Identity and Access Management to grant external identities IAM roles, including the ability to impersonate service accounts. This approach eliminates the maintenance and security burden associated with service account keys.
Use Workload Identity Federation:
- Create a Workload Identity Federation pool.
- Create a Workload Identity Federation provider.
- Grant the appropriate Artifact Registry role to the workload identity pool to allow repository access.
Configure your third-party client to authenticate with Artifact Registry.
Use a service account:
- Create a service account to act on behalf of your application, or choose an existing service account that use for your CI/CD automation.
- Grant the appropriate Artifact Registry role to the service account to provide repository access.
Configure your third-party client to authenticate with Artifact Registry.
GitLab on Google Cloud
The GitLab on Google Cloud integration uses Workload Identity Federation for authorization and authentication for GitLab workloads on Google Cloud without the need for service accounts or service account keys. For more information on how Workload Identity Federation is used in this partnership, see Google Cloud Workload Identity Federation and IAM policies.
To set up Workload Identity Federation and the necessary IAM roles for the GitLab on Google Cloud, see the GitLab tutorial Google Cloud Workload Identity Federation and IAM policies.
To connect your Artifact Registry repository, follow the GitLab tutorial Google Artifact Registry.
Roles and permissions
Every Artifact Registry API method requires that the principal (user, group, or service account) making the request has the required permissions to use the resource. Permissions are given to principals by setting policies that grant the principal a predefined role on the resource.
You can grant roles on the Google Cloud project or the Artifact Registry repository.
Predefined Artifact Registry roles
IAM provides predefined roles that grant access to specific Google Cloud resources and prevent unauthorized access to other resources.
Use the following predefined roles for standard, virtual, and remote
repositories on the pkg.dev
domain:
Role | Description |
---|---|
Artifact Registry Reader ( roles/artifactregistry.reader ) |
View and get artifacts, view repository metadata. |
Artifact Registry Writer ( roles/artifactregistry.writer ) |
Read and write artifacts. |
Artifact Registry Repository Administrator ( roles/artifactregistry.repoAdmin ) |
Read, write, and delete artifacts. |
Artifact Registry Administrator ( roles/artifactregistry.admin ) |
Create and manage repositories and artifacts. |
The following additional predefined roles include permissions to create
gcr.io repositories to host images for the gcr.io
domain. The
roles don't include permissions to create other repository formats in
Artifact Registry on the pkg.dev
domain. These roles support backwards
compatibility with Container Registry, since Container Registry uses the first
push of a container image to create each multi-regional registry.
Role | Description |
---|---|
Artifact Registry Create-on-push Writer
(roles/artifactregistry.createOnPushWriter ) |
Read and write artifacts. Create gcr.io repositories. |
Artifact Registry Create-on-push Repository Administrator
(roles/artifactregistry.createOnPushRepoAdmin ) |
Read, write, and delete artifacts. Create gcr.io repositories. |
For a full list of the individual permissions in each role, refer to
Artifact Registry roles.
You can also use the
gcloud iam roles describe
command to view a list of permissions in each role.
Basic IAM roles
Basic roles are highly permissive roles that existed prior to the introduction of IAM. You can use basic roles to grant principals broad access to Google Cloud resources.
Use predefined roles for repository access whenever possible so that users and service accounts only have the permissions that are required.
For more information on basic roles, see IAM basic and predefined roles reference.
Granting permissions
Grant permissions at the project level if the same permissions apply to all repositories in the project. If some accounts require different levels of access, grant roles at the repository level.
If you're granting permissions on a virtual repository, those permissions apply to all upstream repositories available through the virtual repository, regardless of individual repository permissions.
If you're granting roles using the gcloud
command, you can specify a single
role binding for a principal or use a policy file to define multiple bindings.
Granting project-wide permissions
Grant a role at the project level if the same permissions apply to all repositories in the project.
To add a user or service account to a project and grant them an Artifact Registry role:
Console
Open the IAM page in the Google Cloud console.
Click Select a project, choose the project where Artifact Registry is running, and click Open.
Click Add.
Enter an email address. You can add individuals, service accounts, or Google Groups as principals.
Select a role for the principal. In accordance with the security principle of least privilege, consider granting the least amount of privilege needed to access the required Artifact Registry resources. For information on Artifact Registry predefined roles and permissions, see Predefined Artifact Registry roles.
Click Save.
gcloud
-
In the Google Cloud console, activate Cloud Shell.
At the bottom of the Google Cloud console, a Cloud Shell session starts and displays a command-line prompt. Cloud Shell is a shell environment with the Google Cloud CLI already installed and with values already set for your current project. It can take a few seconds for the session to initialize.
To grant a role to a single principal, run the following command:
gcloud projects add-iam-policy-binding PROJECT \ --member=PRINCIPAL \ --role=ROLE
where
- PROJECT is the ID of the project where Artifact Registry is running.
PRINCIPAL is the principal to add the binding for. Use the form
user|group|serviceAccount:email
ordomain:domain
.Examples:
user:test-user@gmail.com
,group:admins@example.com
,serviceAccount:test123@example.domain.com
, ordomain:example.domain.com
.ROLE is the role that you want to grant.
For more information, see the add-iam-policy-binding documentation.
To grant roles using a policy file, run the following command:
gcloud projects set-iam-policy PROJECT /PATH/TO/policy.yaml
Where
- PROJECT is the ID of the project or fully qualified identifier for the project where Artifact Registry is running.
- /PATH/TO/policy.yaml is the path and file name of the policy file.
To get the currently configured policy, run the following command:
gcloud projects get-iam-policy PROJECT
Where PROJECT is the ID of the project or fully qualified identifier for the project.
For more information, see the set-iam-policy documentation.
Granting repository-specific permissions
Grant repository-level permissions when you want users or service accounts to have different levels of access for each repository in your project.
Console
To grant access to a specific repository:
Open the Repositories page in the Google Cloud console.
Select the appropriate repository.
If the info panel is not displayed, click Show Info Panel in the menu bar.
On the Permissions tab, click Add Principal.
Enter an email address. You can add individuals, service accounts, or Google Groups as principals.
Select a role for the principal. In accordance with the security principle of least privilege, consider granting the least amount of privilege needed to access the required Artifact Registry resources. For information on Artifact Registry predefined roles and permissions, see Predefined Artifact Registry roles.
Click Save.
gcloud
-
In the Google Cloud console, activate Cloud Shell.
At the bottom of the Google Cloud console, a Cloud Shell session starts and displays a command-line prompt. Cloud Shell is a shell environment with the Google Cloud CLI already installed and with values already set for your current project. It can take a few seconds for the session to initialize.
You can set an IAM set of individual policy bindings or use a policy file.
To grant a role to a single principal, run the following command:
gcloud artifacts repositories add-iam-policy-binding REPOSITORY \ --location=LOCATION \ --member=PRINCIPAL \ --role=ROLE
where
- REPOSITORY is the ID of the repository.
PRINCIPAL is the principal to add the binding for. Use the form
user|group|serviceAccount:email
ordomain:domain
.Examples:
user:test-user@gmail.com
,group:admins@example.com
,serviceAccount:test123@example.domain.com
, ordomain:example.domain.com
.ROLE is the role that you want to grant.
LOCATION is the regional or multi-regional location of the repository.
For example, to add an IAM policy binding for the role
roles/artifactregistry.writer
for the userwrite@gmail.com
with the repositorymy-repo
in the location--us-central1
, run:gcloud artifacts repositories add-iam-policy-binding my-repo \ --location=us-central1 --member=user:write@gmail.com --role=roles/artifactregistry.writer
To grant roles using a policy file, run the following command:
gcloud artifacts repositories set-iam-policy REPOSITORY /PATH/TO/policy.yaml --location=LOCATION
Where
- REPOSITORY is the ID of the repository.
- /PATH/TO/policy.yaml is the path and file name of the policy file.
- LOCATION is the regional or multi-regional location of the repository.
For example, to set the IAM policy for the repository
my-repo
in the location--us-central1
with the policy defined inpolicy.yaml
, run:gcloud artifacts repositories set-iam-policy my-repo policy.yaml --location=us-central1
Terraform
Use the google_artifact_registry_repository_iam resource to
configure an IAM policy. The following example defines a service
account with the resource name repo-account
and grants it read access to a
repository with the resource name my-repo
.
If you're new to using Terraform for Google Cloud, see the Get Started - Google Cloud page on the HashiCorp website.
provider "google" {
project = "PROJECT-ID"
}
resource "google_artifact_registry_repository" "my-repo" {
provider = google-beta
location = "LOCATION"
repository_id = "REPOSITORY"
description = "DESCRIPTION"
format = "FORMAT"
}
resource "google_service_account" "repo-account" {
provider = google-beta
account_id = "ACCOUNT-ID"
display_name = "Repository Service Account"
}
resource "google_artifact_registry_repository_iam_member" "repo-iam" {
provider = google-beta
location = google_artifact_registry_repository.my-repo.location
repository = google_artifact_registry_repository.my-repo.name
role = "roles/artifactregistry.reader"
member = "serviceAccount:${google_service_account.repo-account.email}"
}
ACCOUNT-ID is the ID of the service account. This is the
the part of the service account email field before the @
symbol.
For additional examples, see the documentation for the google_artifact_registry_repository_iam resource.
Configuring public access to a repository
If you have artifacts that you want to make available to anyone on the internet without authentication, store them in a repository that you make public.
To configure a repository for public read-only access, grant the
Artifact Registry Reader role to the principal allUsers
. We also recommend
capping user request quotas so that a single
user can't use up your project's overall quota.
Console
Open the Repositories page in the Google Cloud console.
Select the appropriate repository.
If the info panel is not displayed, click Show Info Panel in the menu bar.
On the Permissions tab, click Add Principal.
In New principals field, enter
allUsers
.Select the role Artifact Registry Reader.
Set a per-user limit on Artifact Registry API requests to prevent misuse by unauthenticated users. See Capping usage for instructions.
gcloud
-
In the Google Cloud console, activate Cloud Shell.
At the bottom of the Google Cloud console, a Cloud Shell session starts and displays a command-line prompt. Cloud Shell is a shell environment with the Google Cloud CLI already installed and with values already set for your current project. It can take a few seconds for the session to initialize.
Run the following command:
gcloud artifacts repositories add-iam-policy-binding REPOSITORY \ --location=LOCATION --member=allUsers --role=ROLE
where
REPOSITORY is the ID of the repository.
ROLE is the role that you want to grant.
LOCATION is the regional or multi-regional location of the repository.
For example, configure the repository
my-repo
in the location--us-central1
as public, run:gcloud artifacts repositories add-iam-policy-binding my-repo \ --location=us-central1 --member=allUsers --role=roles/artifactregistry.reader
Set a per-user limit on Artifact Registry API requests to prevent misuse by unauthenticated users. See Capping usage for instructions.
Revoking permissions
To revoke access to a repository, remove the principal from the list of authorized principals.
To remove public access from a repository, remove the allUsers
principal.
Console
To revoke permissions:
Open the Repositories page in the Google Cloud console.
Select the appropriate repository.
If the info panel is not displayed, click Show Info Panel in the menu bar.
On the Permissions tab, expand the appropriate principal. If you are making a public repository private, expand the
allUsers
principal.Click Remove principal to revoke access.
gcloud
-
In the Google Cloud console, activate Cloud Shell.
At the bottom of the Google Cloud console, a Cloud Shell session starts and displays a command-line prompt. Cloud Shell is a shell environment with the Google Cloud CLI already installed and with values already set for your current project. It can take a few seconds for the session to initialize.
To revoke a role at the project level, run the following command:
gcloud projects remove-iam-policy-binding PROJECT \ --member=PRINCIPAL \ --role=ROLE
- PROJECT is the project ID.
PRINCIPAL is the principal to remove the binding for. Use the form
user|group|serviceAccount:email
ordomain:domain
.Examples:
user:test-user@gmail.com
,group:admins@example.com
,serviceAccount:test123@example.domain.com
, ordomain:example.domain.com
.ROLE is the role that you want to revoke.
To revoke a role for a repository, run the following command:
gcloud artifacts repositories remove-iam-policy-binding REPOSITORY --location=LOCATION \ --member=PRINCIPAL \ --role=ROLE
where
- REPOSITORY is the ID of the repository.
PRINCIPAL is the principal to remove the binding for. Use the form
user|group|serviceAccount:email
ordomain:domain
.Examples:
user:test-user@gmail.com
,group:admins@example.com
,serviceAccount:test123@example.domain.com
, ordomain:example.domain.com
.To revoke public access to the repository, specify the principal
allUsers
.ROLE is the role that you want to revoke.
For example, to remove a policy binding for the role
roles/artifactregistry.writer
for the userwrite@gmail.com
with the repositorymy-repo
in the location--us-central1
, run:gcloud artifacts repositories remove-iam-policy-binding my-repo \ --location=us-central1 \ --member=user:write@gmail.com \ --role=roles/artifactregistry.writer
To revoke public access to
my-repo
in the location--us-central1
, run:gcloud artifacts repositories remove-iam-policy-binding my-repo \ --location=us-central1 \ --member=allUsers \ --role=roles/artifactregistry.reader
Granting conditional access with tags
Project administrators can create tags for resources across Google Cloud and manage them in Resource Manager. When you attach a tag to a Artifact Registry repository, administrators can use the tag with IAM conditions to grant conditional access to the repository.
You cannot attach tags to individual artifacts.
For more information see the following documentation:
- Administrators setting up tags and access control
- Developers attaching tags to repositories
Integrating with Google Cloud services
For most Google Cloud service accounts, configuring access to a registry only requires granting the appropriate IAM permissions.
Default permissions for Google Cloud services
Google Cloud services such as Cloud Build or Google Kubernetes Engine use a default service account or service agent to interact with resources within the same project.
You must configure or modify permissions yourself if:
- The Google Cloud service is in a different project than Artifact Registry.
- The default permissions do not meet your needs. For example, the default Compute Engine service account has read-only access to storage in the same project. If you want to push an image from a VM to Artifact Registry, you can modify permissions for the VM service account or use a different account with the required permissions.
- you're using a user-provided service account to interact with Artifact Registry instead of the default service account.
The following service accounts typically access Artifact Registry. The email address for the service account includes the Google Cloud project ID or project number of the project where the service is running.
Service | Service account | Email address | Permissions |
---|---|---|---|
App Engine flexible environment | App Engine service account | PROJECT-ID@appspot.gserviceaccount.com | Editor role, can read and write to repositories |
Compute Engine | Compute Engine default service account | PROJECT-NUMBER-compute@developer.gserviceaccount.com | Editor role, limited to read-only access to repositories |
Cloud Build | Cloud Build service account | PROJECT-NUMBER@cloudbuild.gserviceaccount.com |
Default permissions include read and write access to repositories and the ability to create gcr.io repositories. |
Cloud Run |
Cloud Run service agent The service agent for run.googleapis.com . |
service-PROJECT-NUMBER@serverless-robot-prod.iam.gserviceaccount.com | Reader permissions, limited to read-only access to repositories |
GKE |
Compute Engine default service account The default service account for nodes. |
PROJECT-NUMBER-compute@developer.gserviceaccount.com | Editor role, limited to read-only access to repositories |
Granting access to Compute Engine instances
VM instances that access repositories must have both Artifact Registry permissions and storage access scope configured.
While a service account's access level is determined by the IAM roles granted to the service account, access scopes on a VM instance determine the default OAuth scopes for requests made through the gcloud CLI and client libraries on the instance. As a result, access scopes potentially further limit access to API methods when authenticating with Application Default Credentials.
Compute Engine uses the following defaults:
- The Compute Engine default service account is the identity for VM instances. The service account email address has the suffix @developer.gserviceaccount.com.
- The default service account has the IAM basic Editor role, if you have not disabled this behavior.
- Instances you create with the default service account have the
Compute Engine default access scopes, including
read-only access to storage. While the Editor role generally grants write
access, the
read-only
storage access scope limits the instance service account to downloading artifacts only from any repository in the same project.
You must configure the access scope of the service account if:
- The VM service account needs to access a repository in a different project.
- The VM service account needs to perform actions other than reading artifacts
from repositories. This typically applies third-party tools on a VM that need
to push images or run Artifact Registry
gcloud
commands.
To configure permissions and set the access scope:
In the project with your VM instance, get the name of the Compute Engine default service account. The service account email address has the suffix @developer.gserviceaccount.com.
In the project with the repository, grant permissions so that the service account can access the repository.
Set the access scope with the --scopes option.
Stop the VM instance. See Stopping an instance.
Set the access scope with the following command:
gcloud compute instances set-service-account INSTANCE --scopes=SCOPE
Replace SCOPE with the appropriate value.
For Docker, the following options are supported:
storage-ro
- Grants read permission only for pulling images.storage-rw
- Grants read and write permission for pushing or pulling images.cloud-platform
- View and manage data, including metadata, across Google Cloud service.
For other formats, you must use the
cloud-platform
scope.
Restart the VM instance. See Starting a stopped instance.
Granting access to Google Kubernetes Engine clusters
GKE clusters and node pools can pull containers without any additional configuration if all the following requirements are met:
- GKE is in the same project as Artifact Registry
- Nodes are using the default service account, the Compute Engine default service account
- Nodes were created with read access to storage by:
- Using the Compute Engine default access scopes.
- Granting the
cloud-platform
access scope or another scope that includes read access to storage.
- you're running a supported version of GKE
If your GKE environment does not meet these requirements the instructions to grant access depend on whether you're using the Compute Engine default service account or a user-provided service account as the identity for your nodes.
- Default service account
The following configuration requirements apply to the Compute Engine default service account:
If GKE is in a different project than Artifact Registry, grant the required permissions to the service account.
To push images, interact with repositories for formats other than containers, or run
gcloud
commands from your cluster, you must set access scopes for the service account when you create the cluster or node pool.If you're not using a supported version of GKE, configure imagePullSecrets.
- User-provided service account
If you want to use a user-provided service account as the identity for a cluster, you must:
Grant the required permissions to the service account from the Google Cloud project where Artifact Registry is running.
By default, creating a cluster or node pool with a user-provided service account grants the
cloud-platform
access scope.If you use the
--scopes
flag with the gcloud container clusters create or gcloud container node-pools create command, you must include the appropriate access scopes for use with Artifact Registry.
Setting access scopes
Access scopes are the legacy method of specifying authorization for Compute Engine VMs. To pull images from Artifact Registry repositories, GKE nodes must have the storage read-only access scope or another storage access scope that includes storage read access.
You can only set access scopes when you create a cluster or node pool. You cannot change access scopes on existing nodes.
- If you're using the Compute Engine default service account, GKE creates nodes with the Compute Engine default access scopes, which includes read-only access to storage.
- If you're using a user-provided service account, GKE creates
nodes with the
cloud-platform
scope, the scope required for most Google Cloud services.
To specify access scopes when creating a cluster, run the following command:
gcloud container clusters create NAME --scopes=SCOPES
To specify access scopes when creating a node pool, run the following command:
gcloud container node-pools create NAME --scopes=SCOPES
Replace the following values:
- NAME is the name of the cluster or node pool.
SCOPES is a comma-separated list of access scopes to grant.
To access Docker repositories, use one of the following scopes:
storage-ro
- Grants read-only permission for pulling images.storage-rw
- Grants read and write permission for pushing or pulling images.cloud-platform
- View and manage data, including metadata, across Google Cloud service.To access other repositories, you must use the
cloud-platform
scope.
For a full list of scopes, see the documentation for gcloud container clusters create or gcloud container node-pools create.
For more information about scopes you can set when creating a new cluster, refer to the documentation for the command gcloud container clusters create.
Configuring an imagePullSecret
To configure an imagePullSecret
:
In the project with GKE, find Compute Engine default service account. The account email address has the suffix @developer.gserviceaccount.com.
Download the service account key for the service account.
In the project with the repository, verify that you have granted permissions to the repository.
In the project with your cluster, create an
imagePullSecret
secret calledartifact-registry
with the service account key.kubectl create secret docker-registry artifact-registry \ --docker-server=https://LOCATION-docker.pkg.dev \ --docker-email=SERVICE-ACCOUNT-EMAIL \ --docker-username=_json_key \ --docker-password="$(cat KEY-FILE)"
Where
- LOCATION is the regional or multi-regional location of the repository.
- SERVICE-ACCOUNT-EMAIL is the email address of the Compute Engine service account.
- KEY-FILE is the name of your service account key file. For
example
key.json
.
Open your default service account:
kubectl edit serviceaccount default --namespace default
Every namespace in your Kubernetes cluster has a default service account called
default
. This default service account is used to pull your container image.Add the newly created
imagePullSecret
secret to your default service account:imagePullSecrets: - name: artifact-registry
Your service account should now look like this:
apiVersion: v1 kind: ServiceAccount metadata: name: default namespace: default ... secrets: - name: default-token-zd84v # The secret you created: imagePullSecrets: - name: artifact-registry
Now, any new pods created in the current default
namespace will have the
imagePullSecret
secret defined.
Artifact Registry service account
The Artifact Registry Service Agent is a Google-managed service account that acts on behalf of Artifact Registry when interacting with Google Cloud services. For more information about the account and its permissions, see Artifact Registry service account.
What's next
After you have set up permissions, learn more about working with your artifacts.
- Container images: Docker, Helm
- Language packages: Java, Node.js, Python, Go
- OS packages: Debian, RPM