Quickstart: Deploy a C++ service to Cloud Run

Learn how to create a simple Hello World application, package it into a container image, upload the container image to Artifact Registry, and then deploy the container image to Cloud Run.

Before you begin

  1. Sign in to your Google Cloud account. If you're new to Google Cloud, create an account to evaluate how our products perform in real-world scenarios. New customers also get $300 in free credits to run, test, and deploy workloads.
  2. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

    Go to project selector

  3. Make sure that billing is enabled for your Google Cloud project.

  4. Install the Google Cloud CLI.
  5. To initialize the gcloud CLI, run the following command:

    gcloud init
  6. In the Google Cloud console, on the project selector page, select or create a Google Cloud project.

    Go to project selector

  7. Make sure that billing is enabled for your Google Cloud project.

  8. Install the Google Cloud CLI.
  9. To initialize the gcloud CLI, run the following command:

    gcloud init
  10. To set the default project for your Cloud Run service:
     gcloud config set project PROJECT_ID
    Replace PROJECT_ID with your Google Cloud project ID.
  11. If you are under a domain restriction organization policy restricting unauthenticated invocations for your project, you will need to access your deployed service as described under Testing private services.

  12. Enable the Cloud Run Admin API and the Cloud Build API:

    gcloud services enable run.googleapis.com \
        cloudbuild.googleapis.com

    After the Cloud Run Admin API is enabled, the Compute Engine default service account is automatically created.

  13. For Cloud Build to be able to build your sources, grant the Cloud Build Service Account role to the Compute Engine default service account by running the following:

    gcloud projects add-iam-policy-binding PROJECT_ID \
        --member=serviceAccount:PROJECT_NUMBER-compute@developer.gserviceaccount.com \
        --role=roles/cloudbuild.builds.builder

    Replace PROJECT_NUMBER with your Google Cloud project number, and PROJECT_ID with your Google Cloud project ID. For detailed instructions on how to find your project ID, and project number, see Creating and managing projects.

    Granting the Cloud Build Service Account role to the Compute Engine default service account takes a couple of minutes to propagate.

Write the sample application

To write an application in C++:

  1. Create a new directory named helloworld-cpp and change directory into it:

    mkdir helloworld-cpp
    cd helloworld-cpp
    
  2. Create a new file named CMakeLists.txt and paste the following code into it:

    cmake_minimum_required(VERSION 3.20)
    
    # Define the project name and where to report bugs.
    set(PACKAGE_BUGREPORT
        "https://github.com/GoogleCloudPlatform/cpp-samples/issues")
    project(cpp-samples-cloud-run-hello-world CXX)
    
    find_package(functions_framework_cpp REQUIRED)
    find_package(Threads)
    
    add_executable(cloud_run_hello cloud_run_hello.cc)
    target_compile_features(cloud_run_hello PRIVATE cxx_std_17)
    target_link_libraries(cloud_run_hello functions-framework-cpp::framework)
    
    include(GNUInstallDirs)
    install(TARGETS cloud_run_hello RUNTIME DESTINATION ${CMAKE_INSTALL_BINDIR})
  3. Create a new file named vcpkg.json and paste the following code into it:

    {
      "name": "cpp-samples-cloud-run-hello-world",
      "version-string": "unversioned",
      "homepage": "https://github.com/GoogleCloudPlatform/cpp-samples/",
      "description": [
        "Shows how to deploy a C++ application to Cloud Run."
      ],
      "dependencies": [
        "functions-framework-cpp"
      ]
    }
    
  4. Create a new file named cloud_run_hello.cc and paste the following code into it:

    #include <google/cloud/functions/framework.h>
    #include <cstdlib>
    
    namespace gcf = ::google::cloud::functions;
    
    auto hello_world_http() {
      return gcf::MakeFunction([](gcf::HttpRequest const& /*request*/) {
        std::string greeting = "Hello ";
        auto const* target = std::getenv("TARGET");
        greeting += target == nullptr ? "World" : target;
        greeting += "\n";
    
        return gcf::HttpResponse{}
            .set_header("Content-Type", "text/plain")
            .set_payload(greeting);
      });
    }
    
    int main(int argc, char* argv[]) {
      return gcf::Run(argc, argv, hello_world_http());
    }
    

    This code creates a basic web server that listens on the port defined by the PORT environment variable.

  5. Create a new file named Dockerfile in the same directory as the source files. The C++ Dockerfile starts the application listening on the port defined by the PORT environment variable:

    # We chose Alpine to build the image because it has good support for creating
    # statically-linked, small programs.
    FROM alpine:3.20 AS build
    
    # Install the typical development tools for C++, and
    # the base OS headers and libraries.
    RUN apk update && \
        apk add \
            build-base \
            cmake \
            curl \
            git \
            gcc \
            g++ \
            libc-dev \
            linux-headers \
            ninja \
            pkgconfig \
            tar \
            unzip \
            zip
    
    # Use `vcpkg`, a package manager for C++, to install
    WORKDIR /usr/local/vcpkg
    ENV VCPKG_FORCE_SYSTEM_BINARIES=1
    RUN curl -sSL "https://github.com/Microsoft/vcpkg/archive/2024.04.26.tar.gz" | \
        tar --strip-components=1 -zxf - \
        && ./bootstrap-vcpkg.sh -disableMetrics
    
    # Copy the source code to /v/source and compile it.
    COPY . /v/source
    WORKDIR /v/source
    
    # Run the CMake configuration step, setting the options to create
    # a statically linked C++ program
    RUN cmake -S/v/source -B/v/binary -GNinja \
        -DCMAKE_TOOLCHAIN_FILE=/usr/local/vcpkg/scripts/buildsystems/vcpkg.cmake \
        -DCMAKE_BUILD_TYPE=Release
    
    # Compile the binary and strip it to reduce its size.
    RUN cmake --build /v/binary
    RUN strip /v/binary/cloud_run_hello
    
    # Create the final deployment image, using `scratch` (the empty Docker image)
    # as the starting point. Effectively we create an image that only contains
    # our program.
    FROM scratch AS cloud-run-hello
    WORKDIR /r
    
    # Copy the program from the previously created stage and the shared libraries it
    # depends on.
    COPY --from=build /v/binary/cloud_run_hello /r
    COPY --from=build /lib/ld-musl-x86_64.so.1 /lib/ld-musl-x86_64.so.1
    COPY --from=build /usr/lib/libstdc++.so.6 /usr/lib/libstdc++.so.6
    COPY --from=build /usr/lib/libgcc_s.so.1 /usr/lib/libgcc_s.so.1
    
    # Make the program the entry point.
    ENTRYPOINT [ "/r/cloud_run_hello" ]

Your app is finished and ready to be deployed.

Deploy to Cloud Run from source

Important: This quickstart assumes that you have owner or editor roles in the project you are using for the quickstart. Otherwise, refer to the Cloud Run Source Developer role for the required permissions for deploying a Cloud Run resource from source.

Use Cloud Build to create an image from the source code, and then deploy it.

  1. In the source directory, use Cloud Build to create a docker image for your service

    gcloud builds submit --machine-type=e2_highcpu_32 --tag gcr.io/PROJECT_ID/cloud-run-hello-world
  2. Deploy the image using the following command:

    gcloud run deploy --image=gcr.io/PROJECT_ID/cloud-run-hello-world

    If prompted to enable the API, Reply y to enable.

    1. When you are prompted for the service name, press Enter to accept the default name, for example helloworld.

    2. If you are prompted to enable additional APIs on the project, for example, the Artifact Registry API, respond by pressing y.

    3. When you are prompted for region: select the region of your choice, for example us-central1.

    4. If you are prompted to create a repository in the specified region, respond by pressing y.

    5. If you are prompted to allow unauthenticated invocations: respond y. You might not see this prompt if there is a domain restriction organization policy that prevents it; for more details see the Before you begin section.

    Then wait a few moments until the deployment is complete. On success, the command line displays the service URL.

  3. Visit your deployed service by opening the service URL in a web browser.

Cloud Run locations

Cloud Run is regional, which means the infrastructure that runs your Cloud Run services is located in a specific region and is managed by Google to be redundantly available across all the zones within that region.

Meeting your latency, availability, or durability requirements are primary factors for selecting the region where your Cloud Run services are run. You can generally select the region nearest to your users but you should consider the location of the other Google Cloud products that are used by your Cloud Run service. Using Google Cloud products together across multiple locations can affect your service's latency as well as cost.

Cloud Run is available in the following regions:

Subject to Tier 1 pricing

  • asia-east1 (Taiwan)
  • asia-northeast1 (Tokyo)
  • asia-northeast2 (Osaka)
  • europe-north1 (Finland) leaf icon Low CO2
  • europe-southwest1 (Madrid) leaf icon Low CO2
  • europe-west1 (Belgium) leaf icon Low CO2
  • europe-west4 (Netherlands) leaf icon Low CO2
  • europe-west8 (Milan)
  • europe-west9 (Paris) leaf icon Low CO2
  • me-west1 (Tel Aviv)
  • us-central1 (Iowa) leaf icon Low CO2
  • us-east1 (South Carolina)
  • us-east4 (Northern Virginia)
  • us-east5 (Columbus)
  • us-south1 (Dallas) leaf icon Low CO2
  • us-west1 (Oregon) leaf icon Low CO2

Subject to Tier 2 pricing

  • africa-south1 (Johannesburg)
  • asia-east2 (Hong Kong)
  • asia-northeast3 (Seoul, South Korea)
  • asia-southeast1 (Singapore)
  • asia-southeast2 (Jakarta)
  • asia-south1 (Mumbai, India)
  • asia-south2 (Delhi, India)
  • australia-southeast1 (Sydney)
  • australia-southeast2 (Melbourne)
  • europe-central2 (Warsaw, Poland)
  • europe-west10 (Berlin) leaf icon Low CO2
  • europe-west12 (Turin)
  • europe-west2 (London, UK) leaf icon Low CO2
  • europe-west3 (Frankfurt, Germany) leaf icon Low CO2
  • europe-west6 (Zurich, Switzerland) leaf icon Low CO2
  • me-central1 (Doha)
  • me-central2 (Dammam)
  • northamerica-northeast1 (Montreal) leaf icon Low CO2
  • northamerica-northeast2 (Toronto) leaf icon Low CO2
  • southamerica-east1 (Sao Paulo, Brazil) leaf icon Low CO2
  • southamerica-west1 (Santiago, Chile) leaf icon Low CO2
  • us-west2 (Los Angeles)
  • us-west3 (Salt Lake City)
  • us-west4 (Las Vegas)

If you already created a Cloud Run service, you can view the region in the Cloud Run dashboard in the Google Cloud console.

Congratulations! You have just deployed a container image from source code to Cloud Run. Cloud Run automatically and horizontally scales out your container image to handle the received requests, then scales in when demand decreases. You only pay for the CPU, memory, and networking consumed during request handling.

Clean up

Remove your test project

While Cloud Run does not charge when the service is not in use, you might still be charged for storing the container image in Artifact Registry. You can delete your container image or delete your Google Cloud project to avoid incurring charges. Deleting your Google Cloud project stops billing for all the resources used within that project.

  1. In the Google Cloud console, go to the Manage resources page.

    Go to Manage resources

  2. In the project list, select the project that you want to delete, and then click Delete.
  3. In the dialog, type the project ID, and then click Shut down to delete the project.

What's next

For more information on building a container from code source and pushing to a repository, see: