Modifying connections

For an existing Dedicated Interconnect connection, you can modify its description, technical contact email address, and the number of circuits (the capacity).

If you modify the description or email address, these changes are immediate. If you change the number of circuits, the existing Interconnect connection and its VLAN attachments continue to operate as normal because the circuit bundle uses Link Aggregation Control Protocol (LACP). Traffic isn't disrupted.

  • If you increase the number of circuits, you follow a process similar to creating a connection. Google sends you an LOA-CFA with your requested changes. You send this document to your vendor to grant them authorization to complete the work. New circuits aren't usable until they are provisioned and tested.

  • If you decrease the number of circuits, Google removes the requested number of ports from the bundle and notifies you which circuits to remove. You then need to contact your vendor to remove those Interconnect connections.

Console

  1. In the Google Cloud Console, go to the Cloud Interconnect Physical connections tab.

    Go to Physical connections

  2. For the Interconnect connection that you want to modify, select it.

  3. On the connection's detail page, click Edit.

  4. Modify your Interconnect connection:

    • Description: Information about the connection.
    • Capacity: The total capacity of your connection, which is determined by the number and size of the circuits that you order.

      Select one of the following options:

      • 1 x 10-Gbps circuit in 10-Gbps increments up to 8 x 10-Gbps (80 Gbps) circuits
      • 1 x 100-Gbps (100 Gbps) circuit
      • 2 x 100-Gbps (200 Gbps) circuits
    • Technical contact: An email address where notifications about this connection are sent. You don't need to enter your own address; you are included in all notifications. You can specify only one address.

  5. Click Save.

  6. To confirm your changes, click Done.

gcloud

Modify an existing Interconnect connection by running the following command:

gcloud compute interconnects update INTERCONNECT_NAME \
    --description=UPDATED_DESCRIPTION \
    --noc-contact-email=UPDATED_EMAIL_CONTACT \
    --requested-link-count=UPDATED_COUNT

Replace UPDATED_COUNT with the total number of circuits of type link-type.

For example, if you have a 20-Gbps Interconnect connection and want to make it 40 Gbps, use --requested-link-count=4.

Billing for new circuits starts after they're ready to use (all tests have passed) or 30 days after your order is received. You aren't charged before then. You can cancel your order by reverting to the original number of circuits. Billing for removed circuits stops when the LACP bundle is resized.

What's next