Mantieni tutto organizzato con le raccolte
Salva e classifica i contenuti in base alle tue preferenze.
Se hai una sola connessione Cross-Site Interconnect, puoi crearne
una seconda in modo da avere connessioni ridondanti. Google consiglia
la ridondanza in modo che, se una connessione non funziona, l'altra possa continuare a
gestire il traffico.
Per creare una connessione Cross-Site Interconnect ridondante, devi crearla nella stessa area metropolitana (città) di quella esistente, ma in un dominio di disponibilità edge (zona di disponibilità metropolitana) diverso. In caso contrario, le connessioni non saranno ridondanti.
Autorizzazioni richieste per questa attività
Per eseguire questa attività, devi disporre delle seguenti autorizzazioni
o dei seguenti ruoli Identity and Access Management (IAM).
Nella scheda Connessioni fisiche, seleziona la connessione
Cross-Site Interconnect esistente per visualizzare la pagina
dei dettagli.
Nella sezione Dettagli, visualizza l'indirizzo della sede e registra il nome della città. Questa è la città in cui deve essere configurata la connessione ridondante.
Per creare la connessione Cross-Site Interconnect ridondante:
Nella console Google Cloud , vai alla pagina Interconnect.
Dopo aver confermato di disporre di una quota sufficiente, fai clic su
Avanti: ho preso atto.
Specifica i dettagli della connessione Cross-Site Interconnect:
Nome: un nome per la connessione. Questo nome viene visualizzato
nella console Google Cloud e viene utilizzato da Google Cloud CLI per
fare riferimento alla connessione, ad esempio my-interconnect-redundant.
Località: seleziona Scegli, quindi filtra l'elenco delle località in base alla città in cui si trova la connessione esistente. Seleziona la stessa struttura (se supporta più
di un dominio di disponibilità perimetrale) o una struttura diversa. Per visualizzare
l'elenco delle città e dei relativi domini di disponibilità edge, consulta
Strutture di colocation per l'interconnessione cross-site.
Capacità: la capacità totale della tua connessione,
che è determinata dalle dimensioni del circuito che
ordini. Utilizza lo stesso valore della connessione esistente.
Fai clic su Avanti.
Deseleziona la casella di controllo Crea interconnessione ridondante, quindi fai clic su
Continua per chiudere il messaggio SLA.
In genere, quando crei una connessione
Cross-Site Interconnect, ti consigliamo di ordinare una seconda connessione ridondante.
In questo caso, poiché stai creando una connessione ridondante per una connessione esistente, non devi ordinare un'altra connessione.
(Facoltativo) Seleziona un dominio di disponibilità edge (zona di disponibilità metro).
Se la località selezionata ha più di un dominio di disponibilità edge, puoi scegliere una zona specifica. Scegli la zona che non
contiene la connessione Cross-Site Interconnect esistente
per cui stai creando la ridondanza. Se non hai altre
connessioni nella stessa città, la
console sceglie la zona
corretta per te. Google Cloud
Fai clic su Avanti.
Specifica i tuoi dati di contatto:
Nome azienda: il nome della tua organizzazione da inserire
nella lettera di autorizzazione come parte autorizzata a richiedere una connessione.
Contatto tecnico: un indirizzo email a cui vengono inviate le notifiche
relative a questa connessione. Non è necessario inserire il tuo indirizzo, in quanto sei incluso in tutte le notifiche. Puoi specificare un solo indirizzo.
Rivedi l'ordine. Verifica che i dettagli della connessione Cross-Cloud Interconnect e i dati di contatto siano corretti. Se è tutto
corretto, fai clic su Effettua ordine. In caso contrario, torna indietro e modifica i dettagli della connessione.
Nella pagina di conferma dell'ordine, rivedi i passaggi successivi e seleziona
Fine.
gcloud
Per trovare la città della connessione Cross-Site Interconnect esistente:
Nell'output, visualizza il campo location, che mostra un URL come
https://www.googleapis.com/compute/...<example>.../iad-zone1-1.
L'ultima parte dell'URL è il nome della località (iad-zone1-1).
Descrivi la località
per visualizzare la città in cui si trova, passando il nome della località
dal passaggio precedente:
Per creare la connessione Cross-Site Interconnect ridondante:
Scegli una struttura in cui deve essere
ubicata la connessione Cross-Site Interconnect
ridondante. Dall'elenco delle
sedi,
seleziona una sede che si trova nella stessa città, ma in un dominio di disponibilità edge diverso da quello della connessione esistente.
Ad esempio, se la connessione esistente si trova in iad-zone2-1, seleziona una località che si trova ad Ashburn ma nella zona 1, ad esempio iad-zone1-1. Ti servirà
questo nome della località quando crei la connessione ridondante.
Crea la connessione Cross-Site Interconnect ridondante nella località che hai selezionato. Se utilizzi MACsec per Cloud Interconnect, includi MACSEC nell'elenco delle funzionalità richieste.
INTERCONNECT_NAME: il nome della connessione
Cross-Site Interconnect; questo nome viene visualizzato nella console Google Cloud e
viene utilizzato da Google Cloud CLI per fare riferimento alla connessione, ad esempio
my-interconnect-redundant.
NAME: il nome della tua organizzazione da inserire nella
LOA come parte autorizzata a richiedere una connessione
LINK_TYPE: la capacità per circuito della tua connessione
Cross-Site Interconnect; utilizza lo stesso valore
della connessione esistente:
Se la connessione esistente è costituita da circuiti da 10 Gbps, sostituisci LINK_TYPE con LINK_TYPE_ETHERNET_10G_LR.
Se la connessione esistente è costituita da circuiti da 100 Gbps, sostituisci LINK_TYPE con LINK_TYPE_ETHERNET_100G_LR.
LOCATION_NAME: il nome della località che hai
selezionato nel passaggio precedente
EMAIL_ADDRESS e STRING:
facoltativo; per il contatto NOC, puoi specificare un solo indirizzo email. Non devi inserire il tuo indirizzo perché sei incluso in tutte le notifiche.
Dopo aver ordinato una connessione Cross-Site Interconnect, Google
ti invia un'email di conferma e
alloca le porte per te. Al termine dell'allocazione, Google genera
LOA-CFA per le tue connessioni e te le invia via email. Tutte le email
automatiche vengono inviate al contatto del NOC e alla persona che ha ordinato la
connessione di interconnessione tra siti.
Puoi utilizzare la connessione Cross-Site Interconnect solo dopo che le connessioni sono state sottoposte a provisioning e test per i livelli di luce e la connettività IP.
[[["Facile da capire","easyToUnderstand","thumb-up"],["Il problema è stato risolto","solvedMyProblem","thumb-up"],["Altra","otherUp","thumb-up"]],[["Difficile da capire","hardToUnderstand","thumb-down"],["Informazioni o codice di esempio errati","incorrectInformationOrSampleCode","thumb-down"],["Mancano le informazioni o gli esempi di cui ho bisogno","missingTheInformationSamplesINeed","thumb-down"],["Problema di traduzione","translationIssue","thumb-down"],["Altra","otherDown","thumb-down"]],["Ultimo aggiornamento 2025-09-05 UTC."],[],[],null,["# Duplicate a connection for redundancy\n\nIf you have a single Cross-Site Interconnect connection, you can create\na second one so that you have redundant connections. Google recommends\nredundancy so that if one connection fails, the other connection can continue to\nserve traffic.\n|\n| **Preview**\n|\n|\n| This product is subject to the \"Pre-GA Offerings Terms\" in the General Service Terms section\n| of the [Service Specific Terms](/terms/service-terms#1).\n|\n| Pre-GA products are available \"as is\" and might have limited support.\n|\n| For more information, see the\n| [launch stage descriptions](/products#product-launch-stages).\n\nTo create a redundant Cross-Site Interconnect connection,\nyou must create it in the same\nmetropolitan area (city) as the existing one, but in a different\n[edge availability domain](/network-connectivity/docs/interconnect/concepts/terminology#edge-availability-domain)\n(metro availability zone). If you don't, the connections won't be redundant.\n| **Note:** To build a redundant topology, you must create and configure additional resources. For more information, see [Wire group topologies](/network-connectivity/docs/interconnect/concepts/cross-site-overview#wire-group-topologies) in the Cross-Site Interconnect overview.\n\n#### Permissions required for this task\n\nTo perform this task, you must have been granted the following permissions\n*or* the following Identity and Access Management (IAM) roles.\n\n**Permissions**\n\n- `compute.interconnects.create`\n- `compute.interconnects.get`\n- `compute.interconnectLocations.get`\n- `compute.interconnectLocations.list`\n\n**Roles**\n\n- Owner (`roles/owner`)\n- Editor (`roles/editor`)\n- Compute Network Admin (`roles/compute.networkAdmin`) \n\n### Console\n\nTo find the city of the existing Cross-Site Interconnect connection:\n\n1. In the Google Cloud console, go to the **Interconnect** page.\n\n\n [Go to Interconnect](https://console.cloud.google.com/hybrid/interconnects/list)\n\n \u003cbr /\u003e\n\n2. On the **Physical connections** tab, select the existing\n Cross-Site Interconnect connection to view its details\n page.\n\n3. In the **Details** section, view the location address and record the city\n name. This is the city where the redundant connection must be\n configured.\n\nTo create the redundant Cross-Site Interconnect connection:\n\n1. In the Google Cloud console, go to the **Interconnect** page.\n\n\n [Go to Interconnect](https://console.cloud.google.com/hybrid/interconnects/list)\n\n \u003cbr /\u003e\n\n2. On the **Physical connections** tab, click\n **Set up physical connection**.\n\n3. Select **Cross-Site Interconnect connection** , and then click\n **Continue**.\n\n4. If you haven't already, [check your bandwidth quotas and limits](/network-connectivity/docs/interconnect/how-to/cross-site/check-bandwidth-quota) to ensure that you\n can successfully create a cross-site network with your required bandwidth.\n\n After you have confirmed that you have sufficient quota, click\n **Next: I acknowledge**.\n5. Specify the details of the Cross-Site Interconnect connection:\n\n - **Name** : A name for the connection. This name is displayed in the Google Cloud console and is used by the Google Cloud CLI to reference the connection, such as `my-interconnect-redundant`.\n - **Location** : Select **Choose** , and then filter the list of locations to the city where your existing connection is located. Select the same facility (if it supports more than one edge availability domain) or a different facility. To view the list of cities and their edge availability domains, see [Colocation facilities for Cross-Site Interconnect](/network-connectivity/docs/interconnect/concepts/cross-site-locations).\n - **Capacity**: The total capacity of your connection, which is determined by the size of the circuit that you order. Use the same value as the existing connection.\n6. Click **Next**.\n\n7. Clear the **Create redundant interconnect** checkbox, and then click\n **Continue** to dismiss the SLA message.\n\n Normally, when you create a Cross-Site Interconnect\n connection, we recommend that you order a second redundant connection.\n In this case, because you're creating a redundant connection for an\n existing connection, you don't need to order another connection.\n8. Optional: Select an edge availability domain (metro availability zone).\n\n If the location that you selected has more than one edge availability\n domain, you can choose a particular zone. Choose the zone that doesn't\n contain the existing Cross-Site Interconnect connection\n that you're building redundancy for. If you have no additional\n connections in the same city, the Google Cloud console chooses the\n correct zone for you.\n9. Click **Next**.\n\n10. Specify your contact information:\n\n - **Company name**: The name of your organization to put in the LOA as the party authorized to request a connection.\n - **Technical contact**: An email address where notifications about this connection are sent. You don't need to enter your own address; you are included in all notifications. You can specify only one address.\n11. Review your order. Check that your Cross-Site Interconnect\n connection details and contact information are correct. If everything is\n correct, click **Place order**. If not, go back and edit the connection\n details.\n\n12. On the order confirmation page, review the next steps and then select\n **Done**.\n\n### gcloud\n\nTo find the city of the existing Cross-Site Interconnect connection:\n\n1. [View connection details](/network-connectivity/docs/interconnect/how-to/cross-site/view-connections) to view its location:\n\n ```\n gcloud beta compute interconnects describe INTERCONNECT_NAME\n ```\n\n In the output, view the `location` field, which shows a URL such as\n `https://www.googleapis.com/compute/...\u003cexample\u003e.../iad-zone1-1`.\n The last part of the URL is the name of the location (`iad-zone1-1`).\n2. [Describe the location](/network-connectivity/docs/interconnect/how-to/cross-site/list-locations)\n to view the city in which it's located, passing the location\n name from the previous step:\n\n ```\n gcloud beta compute interconnects locations describe LOCATION_NAME\n ```\n\nTo create the redundant Cross-Site Interconnect connection:\n\n1. Choose a facility where the redundant\n Cross-Site Interconnect connection is to be\n located. From the list of\n [locations](/network-connectivity/docs/interconnect/concepts/cross-site-locations#locations-table),\n select one that's in the same city but in a different edge availability\n domain from the existing connection.\n\n For example, if the existing connection is in `iad-zone2-1`, select a\n location that's in Ashburn but in zone 1, such as `iad-zone1-1`. You need\n this location name when you create the redundant connection.\n2. Create the redundant Cross-Site Interconnect connection in\n the location that you selected. If you are using [MACsec for Cloud Interconnect](/network-connectivity/docs/interconnect/concepts/macsec-overview), include `MACSEC` in the list of\n requested features.\n\n ```\n gcloud beta compute interconnects create INTERCONNECT_NAME \\\n --customer-name=NAME \\\n --interconnect-type=DEDICATED \\\n --requested-features=CROSS_SITE_NETWORK[,MACSEC] \\\n --link-type=LINK_TYPE \\\n --location=LOCATION_NAME \\\n [--noc-contact-email=EMAIL_ADDRESS] \\\n [--description=STRING]\n ```\n\n Replace the following:\n - \u003cvar translate=\"no\"\u003eINTERCONNECT_NAME\u003c/var\u003e: the name for the Cross-Site Interconnect connection; this name is displayed in the Google Cloud console and is used by the Google Cloud CLI to reference the connection, such as `my-interconnect-redundant`.\n - \u003cvar translate=\"no\"\u003eNAME\u003c/var\u003e: the name of your organization to put in the LOA as the party authorized to request a connection\n - \u003cvar translate=\"no\"\u003eLINK_TYPE\u003c/var\u003e: the per-circuit capacity of your Cross-Site Interconnect connection; use the same value as the existing connection:\n - If your existing connection is made up of 10-Gbps circuits, replace \u003cvar translate=\"no\"\u003eLINK_TYPE\u003c/var\u003e with `LINK_TYPE_ETHERNET_10G_LR`.\n - If your existing connection is made up of 100-Gbps circuits, replace \u003cvar translate=\"no\"\u003eLINK_TYPE\u003c/var\u003e with `LINK_TYPE_ETHERNET_100G_LR`.\n - \u003cvar translate=\"no\"\u003eLOCATION_NAME\u003c/var\u003e: the name of the location that you selected in the previous step\n - \u003cvar translate=\"no\"\u003eEMAIL_ADDRESS\u003c/var\u003e and \u003cvar translate=\"no\"\u003eSTRING\u003c/var\u003e: optional; for the NOC contact, you can specify only one email address---you don't need to enter your own address because you are included in all notifications\n\nAfter you order a Cross-Site Interconnect connection, Google\nemails you a confirmation and\nallocates ports for you. When the allocation is complete, Google generates\nLOA-CFAs for your connections and emails them to you. All of the automated\nemails are sent to the NOC contact and the person who ordered the\nCross-Site Interconnect connection.\n\nYou can use the Cross-Site Interconnect connection only after your connections have been provisioned and tested for light levels and IP connectivity.\n\nWhat's next\n-----------\n\n- To upgrade your wire group type using your duplicate connection, see\n [Upgrade or downgrade your wire group type](/network-connectivity/docs/interconnect/how-to/cross-site/modify-network#upgrade-downgrade).\n\n- To create a new Cross-Site Interconnect connection, see the\n [Cross-Site Interconnect provisioning\n overview](/network-connectivity/docs/interconnect/how-to/cross-site/provisioning-overview).\n\n- To help you solve common issues that you might encounter when using\n Cloud Interconnect, see\n [Troubleshooting](/network-connectivity/docs/interconnect/support/troubleshooting)."]]