Organiza tus páginas con colecciones
Guarda y categoriza el contenido según tus preferencias.
Las subredes de doble pila permiten que tus servicios y trabajos de Cloud Run envíen tráfico IPv4 y tráfico IPv6 interno a una red de VPC con salida de VPC directa.
Puedes cambiar el tipo de pila de un trabajo o servicio de Cloud Run existente, o bien actualizar una subred existente a una subred de pila doble.
La compatibilidad con doble pila solo está disponible con subredes en una red de VPC en modo personalizado. Para que el tipo de acceso interno esté disponible para las subredes de doble pila, se debe habilitar el rango de IPv6 interno de la red de VPC. Configura o convierte la red de VPC al modo personalizado.
En comparación con las subredes solo IPv4, las subredes de pila doble pueden experimentar latencias de inicio en frío elevadas, lo que limita la rapidez con la que tu aplicación puede escalar.
Agrega una subred de pila doble en un servicio o trabajo
Las subredes de pila doble tienen rangos de direcciones IPv4 e IPv6. Los servicios y los trabajos de Cloud Run solo pueden enviar tráfico IPv6 a través de una subred que use direcciones IPv6 internas.
Para agregar una subred de pila doble con un rango de IPv6 interno en un servicio o trabajo de Cloud Run, haz lo siguiente:
Console
En la consola de Google Cloud , haz lo siguiente:
Habilita la API de Compute Engine con este comando:
Haz clic en Crear red de VPC si vas a crear una red nueva en modo personalizado.
Si usas una red de VPC existente, haz clic en su nombre para ver la página Detalles de la red de VPC.
Si creas una red nueva o conviertes una existente, ingresa el nombre y asegúrate de que el Modo de creación de subredes esté configurado como Personalizado. Luego, selecciona Configurar un rango de IPv6 interno de ULA para esta red de VPC.
En la pestaña Subredes, haz clic en Agregar subred. En el panel que aparece, haz lo siguiente:
Proporciona un Nombre.
Selecciona una Región.
En Tipo de pila IP, selecciona IPv4 e IPv6 (pila doble).
Si la opción Interno no está disponible, comprueba que se haya asignado un rango de IPv6 interno en la red.
Haz clic en Listo y, luego, en Crear.
Implementa un servicio de Cloud Run o ejecuta un trabajo en la subred de doble pila que creaste. A medida que ingresas los detalles del servicio o trabajo necesarios, puedes seleccionar el nuevo rango de direcciones IPv6 siguiendo estos pasos:
Haz clic en Contenedores, volúmenes, herramientas de redes y seguridad y selecciona la pestaña Herramientas de redes.
Haz clic en Conéctate a una VPC para el tráfico saliente y, luego, en Enviar tráfico directamente a una VPC.
Selecciona la red que creaste en el paso anterior.
Haz clic en el campo Subred para seleccionar el rango de direcciones IPv6 recién creado.
El servicio o el trabajo se aprovisionan automáticamente con el tipo de pila de la subred.
gcloud
Para crear una red de modo personalizado que admita subredes de pila doble, ejecuta el siguiente comando:
No se admite el cambio de tipo de pila de la subred de IPv4 e IPv6 (pila doble) a solo IPv4 (pila única) porque el tipo de acceso de IPv6 de Compute Engine es interno. Para cambiar la subred de pila doble de un servicio o trabajo a una subred de pila única, implementa el servicio o ejecuta el trabajo en una subred de solo IPv4 (pila única).
Verifica la red y la subred
Para verificar que tu servicio o trabajo esté en la red de VPC, ejecuta el siguiente comando:
[[["Fácil de comprender","easyToUnderstand","thumb-up"],["Resolvió mi problema","solvedMyProblem","thumb-up"],["Otro","otherUp","thumb-up"]],[["Difícil de entender","hardToUnderstand","thumb-down"],["Información o código de muestra incorrectos","incorrectInformationOrSampleCode","thumb-down"],["Faltan la información o los ejemplos que necesito","missingTheInformationSamplesINeed","thumb-down"],["Problema de traducción","translationIssue","thumb-down"],["Otro","otherDown","thumb-down"]],["Última actualización: 2025-09-04 (UTC)"],[],[],null,["# Set up dual-stack services and jobs\n\n| **Preview\n| --- Dual-stack services and jobs (internal IPv6 addresses only)**\n|\n|\n| This feature is subject to the \"Pre-GA Offerings Terms\" in the General Service Terms section\n| of the [Service Specific Terms](/terms/service-terms#1).\n|\n| Pre-GA features are available \"as is\" and might have limited support.\n|\n| For more information, see the\n| [launch stage descriptions](/products#product-launch-stages).\n\nDual-stack subnets let your Cloud Run services and jobs send IPv4\nand internal IPv6 traffic to a VPC network with Direct VPC egress.\nYou can change the stack type of an existing Cloud Run service or job or\nupdate an existing subnet to a dual-stack subnet.\n\nSubnet types\n------------\n\nVPC networks support the following\n[Compute Engine subnet types](/vpc/docs/subnets#subnet-types):\n\n- IPv4 only (single-stack) subnets, with only [IPv4 subnet ranges](/vpc/docs/subnets#ipv4-ranges)\n\n- IPv4 and IPv6 (dual-stack) subnets, with both IPv4 and internal [IPv6 subnet ranges](/vpc/docs/subnets#ipv6-ranges)\n\nDual-stack limitations\n----------------------\n\nBefore you change the stack type on an existing Cloud Run service\nor job, consider the following limitations:\n\n- Cloud Run only supports subnets with the *internal* IPv6\n access-type setting. Learn more about\n [internal and external access types for IPv6 addresses](/vpc/docs/subnets#ipv6-ranges).\n\n- Dual-stack support is only available with subnets in a custom-mode\n VPC network. To have the internal access type\n available for dual-stack subnets, the VPC network internal IPv6\n range must be enabled. Set up or [convert](/vpc/docs/create-modify-vpc-networks#switch-network-mode)\n the VPC network to custom mode.\n\n- Compared to IPv4-only subnets, dual-stack subnets might experience elevated\n cold-start latencies, limiting how quickly your application can scale up.\n\n- [NAT64](https://tools.ietf.org/html/rfc6146) is not supported.\n\nAdd a dual-stack subnet on a service or job\n-------------------------------------------\n\nDual-stack subnets have both IPv4 and IPv6 address ranges. Cloud Run\nservices and jobs can only send IPv6 traffic through a subnet that uses\n[internal IPv6 addresses](/vpc/docs/subnets#ipv6-ranges).\n\nTo add a dual-stack subnet with an internal IPv6 range on a Cloud Run\nservice or job, do the following: \n\n### Console\n\n1. In the Google Cloud console:\n\n 1. Enable the Compute Engine API:\n\n [Enable the Compute Engine API](https://console.cloud.google.com/apis/library/compute.googleapis.com)\n 2. Go to the **VPC networks** page:\n\n [Go to VPC networks](https://console.cloud.google.com/networking/networks/list)\n2. Click **Create VPC network** if you are creating a new custom-mode network.\n If you are using an existing VPC network, click the name of the\n VPC network to show its *VPC network details* page.\n\n3. If you are creating a new network or converting an existing one, enter the\n name and be sure that the **Subnet creation mode** is set to **Custom** , then select\n **Configure a ULA internal IPv6 range for this VPC Network**.\n\n4. From the **Subnets** tab, click **Add subnet**. In the panel that appears:\n\n 1. Provide a **Name**.\n 2. Select a **Region**.\n 3. For **IP stack type** , select **IPv4 and IPv6 (dual-stack)**.\n 4. Enter an **IPv4 range** . This is the [primary IPv4 range](/vpc/docs/vpc#vpc_networks_and_subnets) for the subnet.\n 5. Select **Internal** for the **IPv6 access type**.\n\n If the **Internal** option is not available, check that an internal\n IPv6 range is assigned on the network.\n 6. Click **Done** , then click **Create**.\n\n5. [Deploy a Cloud Run service](/run/docs/deploying) or\n [execute a job](/run/docs/execute/jobs#execute_jobs) on the dual-stack\n subnet that you created. As you enter the needed service or job details, you\n can select the new IPv6 address range by following these steps:\n\n 1. Click **Container(s), Volumes, Networking, Security** and select the **Networking** tab.\n 2. Click **Connect to a VPC for outbound traffic** and then **Send traffic\n directly to a VPC**.\n 3. Select the **Network** that you created in the previous step.\n 4. Click the **Subnet** field to select the newly created IPv6 address range.\n\n The service or job is automatically provisioned\n with the subnet's stack type.\n\n### gcloud\n\n1. To create a custom-mode network that supports dual-stack subnets, run the following command:\n\n```\ngcloud compute networks create NETWORK \\\n --subnet-mode=custom \\\n --enable-ula-internal-ipv6\n```\n\nReplace \u003cvar translate=\"no\"\u003eNETWORK\u003c/var\u003e with the name of the VPC\nnetwork that will contain the new subnet.\n\n1. To convert to or update a custom-mode network so that it supports dual-stack subnets, run the following command:\n\n```\ngcloud compute networks update NETWORK \\\n --subnet-mode=custom \\\n --enable-ula-internal-ipv6\n```\n\nReplace \u003cvar translate=\"no\"\u003eNETWORK\u003c/var\u003e with the name of the VPC\nnetwork that will contain the new subnet.\n\n1. To create a dual-stack subnet with an internal IPv6 range, run the [`subnets create` command](/sdk/gcloud/reference/compute/networks/subnets/create) using the dual-stack settings:\n\n```\ngcloud compute networks subnets create SUBNET \\\n --network=NETWORK \\\n --range=PRIMARY_IPv4_RANGE \\\n --stack-type=IPV4_IPV6 \\\n --ipv6-access-type=INTERNAL \\\n --region=REGION\n```\n\nReplace the following:\n\n- \u003cvar translate=\"no\"\u003eSUBNET\u003c/var\u003e: a name for the new subnet.\n- \u003cvar translate=\"no\"\u003eNETWORK\u003c/var\u003e: the name of the VPC network that will contain the new subnet.\n- \u003cvar translate=\"no\"\u003ePRIMARY_IPv4_RANGE\u003c/var\u003e: the primary IPv4 range for the new subnet, in CIDR notation. For more information, see [IPv4 subnet\n ranges](/vpc/docs/subnets#manually_created_subnet_ip_ranges).\n- \u003cvar translate=\"no\"\u003eREGION\u003c/var\u003e: the Google Cloud region that the new subnet will be created in.\n\n1. [Deploy a Cloud Run service](/run/docs/deploying) or [execute a job](/run/docs/execute/jobs#execute_jobs) on the dual-stack subnet that you created. The service or job is automatically provisioned with the subnet's stack type.\n\nChange a subnet from single-stack to dual-stack\n-----------------------------------------------\n\nTo add an internal IPv6 subnet range to an existing IPv4-only subnet in a\ncustom-mode VPC network, see\n[Change a subnet's stack type to dual-stack](/vpc/docs/create-modify-vpc-networks#subnet-enable-ipv6).\nThen, [deploy the service](/run/docs/deploying) or [execute the job](/run/docs/execute/jobs#execute_jobs)\non the dual-stack subnet.\n\nChange a subnet from dual-stack to single-stack\n-----------------------------------------------\n\nChanging the subnet's stack type from IPv4 and IPv6 (dual-stack) to IPv4 only\n(single-stack) is not supported because the Compute Engine IPv6\naccess type is internal. To change a service or job's dual-stack subnet to a\nsingle-stack subnet, [deploy the service](/run/docs/deploying) or\n[execute the job](/run/docs/execute/jobs#execute_jobs) on an IPv4-only\n(single-stack) subnet.\n\nVerify the network and subnet\n-----------------------------\n\nTo check that your service or job is on the VPC network, run the\nfollowing command:\n\n\u003cbr /\u003e\n\n```bash\ngcloud run services describe SERVICE_NAME --region=REGION\n```\n\n\u003cbr /\u003e\n\nReplace \u003cvar translate=\"no\"\u003eREGION\u003c/var\u003e with the Google Cloud region that the\nnew subnet was created in.\n\nThe following example output shows your network and subnet: \n\n VPC Access:\n Network: example-network\n Subnet: example-subnet\n Egress: private-ranges-only"]]
