이 안내에서 경로를 사용하여 MANAGEMENT_API_SERVER{"</var>"}}을 바꿉니다.
권한 및 액세스 요청
이 페이지에 나열된 작업을 수행하려면 프로젝트 VirtualMachine 관리자 역할이 있어야 합니다. 단계에 따라 VM이 있는 프로젝트의 네임스페이스에서 확인하거나 프로젝트 IAM 관리자가 프로젝트 VirtualMachine 관리자 (project-vm-admin) 역할을 할당하도록 합니다.
GDC 콘솔 또는 gdcloud CLI를 사용하는 VM 작업의 경우 프로젝트 IAM 관리자에게 프로젝트 VirtualMachine 관리자 역할과 프로젝트 뷰어 (project-viewer) 역할을 모두 할당해 달라고 요청하세요.
VM 목록 가져오기
GDC 콘솔 또는 kubectl를 사용하여 프로젝트에서 사용할 수 있는 VM을 나열할 수 있습니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-04(UTC)"],[[["\u003cp\u003eThis guide details how to view and manage virtual machines (VMs) within a project, including listing VMs and viewing their details like ingress and egress IP addresses and status.\u003c/p\u003e\n"],["\u003cp\u003eYou can list VMs using either the GDC console by navigating to the "Virtual Machines > Instances" page, or through the \u003ccode\u003egdcloud\u003c/code\u003e and \u003ccode\u003ekubectl\u003c/code\u003e command-line interfaces.\u003c/p\u003e\n"],["\u003cp\u003eThe \u003ccode\u003ekubectl\u003c/code\u003e CLI is used to get a list of VMs, their boot disks, and the source image associated with them, requiring the admin cluster's kubeconfig file path and project name.\u003c/p\u003e\n"],["\u003cp\u003eTo use the \u003ccode\u003egdcloud\u003c/code\u003e or \u003ccode\u003ekubectl\u003c/code\u003e CLI, you must ensure you have the appropriate CLI downloaded, installed, and configured, as well as obtain the admin cluster's kubeconfig file if you do not already possess it.\u003c/p\u003e\n"],["\u003cp\u003eDetails on viewing IP addresses for a specific VM are provided on the linked "IP addresses" page, giving further insight into VM management.\u003c/p\u003e\n"]]],[],null,["# View VM properties\n\nView virtual machines (VMs) that have been created within a project and see\ndetails associated with each, such as the ingress IP address, the egress IP\naddress, and the VM's status, such as `Running`.\n\nBefore you begin\n----------------\n\nTo use `gdcloud` command-line interface (CLI) commands, ensure that you have downloaded, installed,\nand configured the [`gdcloud` CLI](/distributed-cloud/hosted/docs/latest/appliance/resources/gdcloud-overview).\nAll commands for GDC air-gapped appliance use the `gdcloud` or\n`kubectl` CLI, and require an operating system (OS) environment.\n\n### Get the kubeconfig file path\n\nTo run commands against the Management API server, ensure you have the following\nresources:\n\n1. Locate the Management API server name, or ask your Platform Administrator (PA)\n what the server name is.\n\n2. [Sign in and generate](/distributed-cloud/hosted/docs/latest/appliance/application/ao-user/iam/sign-in#cli) the\n kubeconfig file for the Management API server if you don't have one.\n\n3. Use the path to replace \u003cvar translate=\"no\"\u003eMANAGEMENT_API_SERVER{\"</var>\"}}\u003c/var\u003e in these instructions.\n\n### Request permissions and access\n\nTo perform the tasks listed in this page, you must have the Project\nVirtualMachine Admin role. Follow the steps to either\n[verify](/distributed-cloud/hosted/docs/latest/appliance/application/ao-user/vms/preparation#verify-user-access)\nor have your Project IAM Admin\n[assign](/distributed-cloud/hosted/docs/latest/appliance/application/ao-user/vms/preparation#grant-user-access-vm-resources)\nyou the Project VirtualMachine Admin (`project-vm-admin`) role in the namespace\nof the project where the VM resides.\n\nFor VM operations using the GDC console or the gdcloud CLI,\nrequest your Project IAM Admin to assign you both the\nProject VirtualMachine Admin role and the Project Viewer (`project-viewer`)\nrole.\n\nGet a list of VMs\n-----------------\n\nYou can list the VMs available in a project by using the GDC console\nor `kubectl`. \n\n### Console\n\n1. In the navigation menu, click **Virtual Machines \\\u003e Instances**.\n\n2. The VM instances page shows a list of VMs.\n\n3. Click the name of a VM instance to view its details.\n\n### gdcloud\n\nTo list VM instances: \n\n gdcloud compute instances list --project \u003cvar translate=\"no\"\u003ePROJECT\u003c/var\u003e\n\n- Replace \u003cvar translate=\"no\"\u003ePROJECT\u003c/var\u003e with the name of the GDC project in which the VM lives.\n\n### kubectl\n\nGet a list of VMs: \n\n kubectl --kubeconfig \u003cvar translate=\"no\"\u003eMANAGEMENT_API_SERVER\u003c/var\u003e \\\n get virtualmachines.virtualmachine.gdc.goog -n \u003cvar translate=\"no\"\u003ePROJECT\u003c/var\u003e\n\n- Replace \u003cvar translate=\"no\"\u003eMANAGEMENT_API_SERVER\u003c/var\u003e with the kubeconfig file for the Management API server.\n- Replace \u003cvar translate=\"no\"\u003ePROJECT\u003c/var\u003e with the name of the GDC project in which the VM lives.\n\nLocate IP addresses for a VM\n----------------------------\n\nSee the [IP addresses](/distributed-cloud/hosted/docs/latest/appliance/application/ao-user/vms/connect-to-vm/ip-addresses)\npage for instructions on viewing the IP address information for a given VM.\n\nView a VM source image\n----------------------\n\nYou can view the source image of a VM. \n\n### kubectl\n\nTo get the VM boot disk: \n\n DISK=`kubectl --kubeconfig \u003cvar translate=\"no\"\u003eMANAGEMENT_API_SERVER\u003c/var\u003e get virtualmachines.virtualmachine.gdc.goog \\\n -n \u003cvar translate=\"no\"\u003ePROJECT\u003c/var\u003e \u003cvar translate=\"no\"\u003eVM_NAME\u003c/var\u003e \\\n -o jsonpath={.spec.disks[?(@.boot==true)].virtualMachineDiskRef.name}`\n\nTo view the source image: \n\n kubectl --kubeconfig \u003cvar translate=\"no\"\u003eMANAGEMENT_API_SERVER\u003c/var\u003e get virtualmachinedisk.virtualmachine.gdc.goog \\\n -n \u003cvar translate=\"no\"\u003ePROJECT\u003c/var\u003e $DISK -o jsonpath={.spec.source.image.name}\n\n- Replace \u003cvar translate=\"no\"\u003eMANAGEMENT_API_SERVER\u003c/var\u003e with the kubeconfig file for the Management API server.\n- Replace \u003cvar translate=\"no\"\u003ePROJECT\u003c/var\u003e with the GDC project in which the VM lives.\n- Replace \u003cvar translate=\"no\"\u003eVM_NAME\u003c/var\u003e with the name of the VM."]]
