Using automation rules

This document describes automation rules, which are actions that can be taken on your delivery pipeline automatically. For example, you can configure your delivery pipeline so that promotion into a specific target happens automatically, under the right circumstances.

You can only use automation rules that are built into Cloud Deploy. The available automation rules are listed in this document.

Note: You can have a maximum of 250 automation rules per delivery pipeline.

Available automation rules

The following automation rules are available in Cloud Deploy:

Rule	Description
promoteReleaseRule	Automatically promotes a release into the indicated target after successful rollout in the previous target in the progression.
advanceRolloutRule	Automatically advances a rollout from the indicated phase to the next phase.
repairRolloutRule	Automatically retry the failed job or jobs in the rollout a specified number of times, and roll back if all retries fail.

Configure automation rules

Configuration for each automation rule depends on the specific rule. This section describes configuration that all rules have in common, as well as how to configure each of the available rules.

The following sections describe configuration specific to individual automation rules. See Automate your deployment for configuration of the automation itself.

Configure a promoteReleaseRule automation rule

The promoteReleaseRule rule promotes your release after a successful rollout into a target. For example, if you have three targets, you can set up this rule so that when the release is successfully deployed into the first target, it's automatically promoted to the second target.

Note: The service account configured in the automation (the "automation service account") must have the clouddeploy.rollouts.create permission. The automation service account must have iam.serviceAccount.actAs permission to impersonate the Cloud Deploy execution service account. See IAM roles and permissions for more information.

When you configure a promoteReleaseRule automation, you can specify either a target to promote to (destinationTargetId) or @next. When the rollout finishes successfully in target specified in the Automation definition, the release is then promoted to the target specified in destinationTargetId, subject to a wait time interval.

You can also promote a release to a specific phase in the intended target, using the destinationPhase property.

rules:
- promoteReleaseRule:
    name: "[RULE_NAME]"
    wait: [WAIT_TIME]
    destinationTargetId: "[TO_TARGET]"
    destinationPhase: "[TO_PHASE]"

Where:

• [RULE_NAME]

  Is any name you want to give to this rule. This name must be unique within the automation resource.

• [WAIT_TIME]

  Is the amount of time, in minutes, to wait after the release is ready for promotion before it's promoted. For example, 1m. The m is required.

  The default value is 0, or no wait time. The maximum is 20160m (or 14 days).

• [TO_TARGET]

  Is the targetId of the target to promote to.

  This can also be @next, which promotes the release automatically to the next target after the target specified in the selector.targets property in this automation config. This is the default if you omit the value from destinationTargetId.

• [TO_PHASE]

  Is the phase name of the phase you want to promote to, for example canary-25 or stable. This property is optional; if you omit it, the release is promoted to the first phase in the target.

Configure an advanceRolloutRule automation rule

The advanceRolloutRule advances your rollout, automatically, after successful completion of one phase, into the next phase. This automation rule is useful for canary deployments. For example, if you have a canary deployment strategy configured on a target, with phases of 25%, 50%, and stable, you could configure an automation rule that advances the phase automatically to stable after the 50% phase finishes.

Note: The service account configured in the automation (the "automation service account") must have the clouddeploy.rollouts.advance permission. The automation service account must have iam.serviceAccount.actAs permission to impersonate the Cloud Deploy execution service account. See IAM roles and permissions for more information.

When you configure a advanceRolloutRule automation, you identify the phase to advance from (the sourcePhase).

rules:
- advanceRolloutRule:
    name: "[RULE_NAME]"
    sourcePhases: ["[START_PHASE]", "[START_PHASE]"...]
    wait: [WAIT_TIME]

Where:

• [RULE_NAME]

  Is any name you want to give to this rule. This name must be unique within the delivery pipeline.

• [WAIT_TIME]

  Is the amount of time, in minutes, to wait to advance the rollout after the rollout is ready. For example, 1m. The m is required.

  The default value is 0, or no wait time. The maximum is 20160m (or 14 days).

• ["[START_PHASE]", "[START_PHASE]"...]

  Is the phase or phases from which the rollout is automatically advanced. That is, when any of the phases listed finish successfully, the rollout is automatically advanced from that phase to the next phase.

  Phase names are case sensitive. Also, these phase names are optional; if you omit sourcePhases, all phases in the rollout are automatically advanced.

Configuring a repairRolloutRule automation rule

The repairRolloutRule rule retries a failed rollout a specified number of times. If that number of retries is exhausted, this rule can then automatically roll back the target to the last successful release.

When you configure a repairRolloutRule automation, you can specify how many times to retry the rollout, and the wait time between retries. You can also configure specific phases or jobs, or both, to retry. If each retry attempt fails, the rollout fails. If any retry succeeds, the automation stops and the rollout succeeds.

Optionally, you can configure the automation to roll back to the last successful release on the target. Retries are also optional, but you need to have either some number of retries or a rollback, or both.

rules:
- repairRolloutRule:
    name: "[RULE_NAME]"
    phases: [PHASES_TO_REPAIR]
    jobs: [JOBS_TO_REPAIR]
    repairPhases:
    - retry:
        attempts: [NUMBER_OF_ATTEMPTS]
        wait: [WAIT_TIME]
        backoffMode: [LINEAR | EXPONENTIAL]
    - rollback:
        destinationPhase: [PHASE_NAME]

Where:

• [RULE_NAME]

  Is any name you want to give to this rule. This name must be unique within the delivery pipeline.

• [PHASES_TO_REPAIR]

  Is the rollout phase or phases to retry. This is optional, and the default is all phases in the rollout.

• [JOBS_TO_REPAIR]

  Is the job or jobs to retry. This is optional, and the default is all jobs.

• [NUMBER_OF_ATTEMPTS]

  Optional, the number of times to retry the rollout before considering it failed.

• [WAIT_TIME]

  Is the amount of time to wait between retry attempts. For example, 1m for a one-minutes interval. The time unit (m in this case) is required.

  If mode is linear, this interval is the same for each retry. If mode is exponential, the interval increases each time. (See mode for further description.)

• backoffMode

  LINEAR or EXPONENTIAL, indicating whether or not to increase the time between retires. If LINEAR, the time between retries is constant, at WAIT_TIME. If EXPONENTIAL, the time between retries doubles with each successive retry. Default is LINEAR.

  For example, if WAIT_TIME is 1m, and backoffMode is set to EXPONENTIAL, then the time between the failure and the first retry is 1 minute, the time between the first and second retries is 2 minutes, and the time between the second and third retries is 4 minutes.

• rollback

  Optional, whether or not to roll back the failed rollout after all retry attempts are exhausted.

• [PHASE_NAME]

  Is the name of a specific phase you want to roll back to. If you omit toPhase, the rollback defaults to the stable phase.

Abort a repairRolloutRule automation run

If you run any of the following commands on your rollout, the repairRolloutRule automation is aborted:

• Retry job
• Cancel rollout
• Ignore job
• Terminate job run

Example

The following is an example of an automation configuration with a repairRolloutRule:

apiVersion: deploy.cloud.google.com/v1
kind: Automation
metadata:
  name: regular-repair/regular
description: repair regular rollouts
suspended: false
serviceAccount: (REDACTED)
selector:
  targets:
  - id: t1
rules:
- repairRolloutRule:
    name: "repair-rollout"
    repairPhases:
    - retry:
        attempts: 3
        wait: 1m
        backoffMode: LINEAR
    - rollback:
        destinationPhase: "stable"

In this automation, if a rollout fails on the identified target, that rollout is retried up to 3 times, with a one-minute wait between retry attempt. If all retry attempts fail, a rollback is started by creating a new rollout to deploy the target's most recent successful release to that target.

What's next

• Try the quickstart: Automate release creation and rollout advancement.

• Learn more about deployment automation in Cloud Deploy.