Configure connectors in the Shared VPC host project

If your organization uses Shared VPC, you can set up a Serverless VPC Access connector in either the service project or the host project. This guide shows how to set up a connector in the host project.

If you need to set up a connector in a service project, see Configure connectors in service projects. To learn about the advantages of each method, see Connecting to a Shared VPC network.

Before you begin

Check the Identity and Access Management (IAM) roles for the account you are currently using. The active account must have the following roles on the host project:
Select the host project in your preferred environment.

Console

Go to the Google Cloud console dashboard.

Go to Google Cloud console dashboard
In the menu bar at the top of the dashboard, click the project dropdown menu and select the host project.

gcloud

Set the default project in the gcloud CLI to the host project by running the following in your terminal:

gcloud config set project HOST_PROJECT_ID

Replace the following:

HOST_PROJECT_ID: the ID of the Shared VPC host project

Create a Serverless VPC Access connector

To send requests to your VPC network and receive the corresponding responses, you must create a Serverless VPC Access connector. You can create a connector by using the Google Cloud console, Google Cloud CLI, or Terraform:

Console

Enable the Serverless VPC Access API for your project.

Enable API
Go to the Serverless VPC Access overview page.

Go to Serverless VPC Access
Click Create connector.
In the Name field, enter a name for your connector. The name must follow the Compute Engine naming convention and be less than 21 characters. Hyphens (-) count as two characters.
In the Region field, select a region for your connector. This must match the region of your serverless service.

If your service is in the region us-central or europe-west, use us-central1 or europe-west1.
In the Network field, select the VPC network to attach your connector to.
Click the Subnetwork pulldown menu:

Select an unused /28 subnet.
- Subnets must be used exclusively by the connector. They cannot be used by other resources such as VMs, Private Service Connect, or load balancers.
- To confirm that your subnet is not used for Private Service Connect or Cloud Load Balancing, check that the subnet purpose is PRIVATE by running the following command in the gcloud CLI:
```
gcloud compute networks subnets describe SUBNET_NAME
```
  Replace SUBNET_NAME with the name of your subnet.
(Optional) To set scaling options for additional control over the connector, click Show Scaling Settings to display the scaling form.
1. Set the minimum and maximum number of instances for your connector, or use the defaults, which are 2 (min) and 10 (max). The connector scales out to the maximum specified as traffic increases, but the connector does not scale back in when traffic decreases. You must use values between 2 and 10, and the MIN value must be less than the MAX value.
2. In the Instance Type pulldown menu, choose the machine type to be used for the connector, or use the default e2-micro. Notice the cost sidebar on the right when you choose the instance type, which displays bandwidth and cost estimations.
Click Create.
A green check mark will appear next to the connector's name when it is ready to use.

gcloud

Update gcloud components to the latest version:
```
gcloud components update
```
Enable the Serverless VPC Access API for your project:
```
gcloud services enable vpcaccess.googleapis.com
```
Create a Serverless VPC Access connector:
```
gcloud compute networks vpc-access connectors create CONNECTOR_NAME \
--region=REGION \
--subnet=SUBNET \
--subnet-project=HOST_PROJECT_ID \
# Optional: specify minimum and maximum instance values between 2 and 10, default is 2 min, 10 max.
--min-instances=MIN \
--max-instances=MAX \
# Optional: specify machine type, default is e2-micro
--machine-type=MACHINE_TYPE
```
Replace the following:
- CONNECTOR_NAME: a name for your connector. The name must follow the Compute Engine naming convention and be less than 21 characters. Hyphens (-) count as two characters.
- REGION: a region for your connector; this must match the region of your serverless service. If your service is in the region us-central or europe-west, use us-central1 or europe-west1.
- SUBNET: the name of an unused /28 subnet.
  - Subnets must be used exclusively by the connector. They cannot be used by other resources such as VMs, Private Service Connect, or load balancers.
  - To confirm that your subnet is not used for Private Service Connect or Cloud Load Balancing, check that the subnet purpose is PRIVATE by running the following command in the gcloud CLI:
```
gcloud compute networks subnets describe SUBNET_NAME
```
    Replace the following:
    - SUBNET_NAME: the name of your subnet
- HOST_PROJECT_ID: the ID of the host project
- MIN: the minimum number of instances to use for the connector. Use an integer between 2 and 9. Default is 2. To learn about connector scaling, see Throughput and scaling.
- MAX: the maximum number of instances to use for the connector. Use an integer between 3 and 10. Default is 10. If traffic requires it, the connector scales out to [MAX] instances, but does not scale back in. To learn about connector scaling, see Throughput and scaling.
- MACHINE_TYPE: f1-micro, e2-micro, or e2-standard-4. To learn about connector throughput, including machine type and scaling, see Throughput and scaling.
For more details and optional arguments, see the gcloud reference.
Verify that your connector is in the READY state before using it:
```
gcloud compute networks vpc-access connectors describe CONNECTOR_NAME \
--region=REGION
```
Replace the following:
- CONNECTOR_NAME: the name of your connector; this is the name that you specified in the previous step
- REGION: the region of your connector; this is the region that you specified in the previous step
The output should contain the line state: READY.

Terraform

You can use a Terraform resource to enable the vpcaccess.googleapis.com API.

resource "google_project_service" "vpcaccess-api" {
  project = var.project_id # Replace this with your project ID in quotes
  service = "vpcaccess.googleapis.com"
}

You can use Terraform modules to create a VPC network and subnet and then create the connector.

module "test-vpc-module" {
  source       = "terraform-google-modules/network/google"
  version      = "~> 9.0"
  project_id   = var.project_id # Replace this with your project ID in quotes
  network_name = "my-serverless-network"
  mtu          = 1460

  subnets = [
    {
      subnet_name   = "serverless-subnet"
      subnet_ip     = "10.10.10.0/28"
      subnet_region = "us-central1"
    }
  ]
}

module "serverless-connector" {
  source     = "terraform-google-modules/network/google//modules/vpc-serverless-connector-beta"
  version    = "~> 9.0"
  project_id = var.project_id
  vpc_connectors = [{
    name        = "central-serverless"
    region      = "us-central1"
    subnet_name = module.test-vpc-module.subnets["us-central1/serverless-subnet"].name
    # host_project_id = var.host_project_id # Specify a host_project_id for shared VPC
    machine_type  = "e2-standard-4"
    min_instances = 2
    max_instances = 7
    }
    # Uncomment to specify an ip_cidr_range
    #   , {
    #     name          = "central-serverless2"
    #     region        = "us-central1"
    #     network       = module.test-vpc-module.network_name
    #     ip_cidr_range = "10.10.11.0/28"
    #     subnet_name   = null
    #     machine_type  = "e2-standard-4"
    #     min_instances = 2
    #   max_instances = 7 }
  ]
  depends_on = [
    google_project_service.vpcaccess-api
  ]
}

Provide access to the connector

Provide access to the connector by granting the Serverless VPC Access User IAM role on the host project to the principal that deploys your App Engine service.

Console

Open the IAM page.

Go to IAM
Click the project dropdown menu and select the host project.
Click Add.
In the New principals field, add the principal that deploys your App Engine service.
In the Role field, select Serverless VPC Access User.
Click Save.

gcloud

Run the following in your terminal:

gcloud projects add-iam-policy-binding HOST_PROJECT_ID \
--member=PRINCIPAL \
--role=roles/vpcaccess.user

Replace the following:

HOST_PROJECT_ID: the ID of the Shared VPC host project
PRINCIPAL: the principal that deploys your App Engine service. Learn more about the --member flag.

Make the connector discoverable

To see the connector, principals need certain viewing roles on both the host project and the service project. To make your connector appear when principals view available connectors in the Google Cloud console or from their terminal, add IAM roles for principals who deploy App Engine services.

Grant IAM roles on the host project

On the host project, grant principals who deploy App Engine services the Serverless VPC Access Viewer (vpcaccess.viewer) role.

Console

Open the IAM page.

Go to IAM
Click the project dropdown menu and select the host project.
Click Add.
In the New principals field, enter the email address of the principal that should be able to see the connector from the service project. You can enter multiple emails in this field.
In the Role field, select Serverless VPC Access Viewer.
Click Save.

gcloud

Run the following in your terminal:

gcloud projects add-iam-policy-binding HOST_PROJECT_ID \
--member=PRINCIPAL \
--role=roles/vpcaccess.viewer

Replace the following:

HOST_PROJECT_ID: the ID of the Shared VPC host project
PRINCIPAL: the principal who deploys App Engine services. Learn more about the --member flag.

Grant IAM roles on the service project

On the service project, grant principals who deploy App Engine services the Compute Network Viewer (compute.networkViewer) role.

Console

Open the IAM page.

Go to IAM
Click the project dropdown menu and select the service project.
Click Add.
In the New principals field, enter the email address of the principal that should be able to see the connector from the service project. You can enter multiple emails in this field.
In the Role field, select Compute Network Viewer.
Click Save.

gcloud

Run the following in your terminal:

gcloud projects add-iam-policy-binding SERVICE_PROJECT_ID \
--member=PRINCIPAL \
--role=roles/compute.networkViewer

Replace the following:

SERVICE_PROJECT_ID: the ID of the service project
PRINCIPAL: the principal who deploys App Engine services. Learn more about the --member flag.

Configure your service to use a connector

For each App Engine service that requires access to your Shared VPC, you must specify the connector for the service. The following steps show how to configure your service to use a connector.

Add the vpc_access_connector to your service's app.yaml file:
```
vpc_access_connector:
name: projects/HOST_PROJECT_ID/locations/REGION/connectors/CONNECTOR_NAME
```
Replace the following:
- HOST_PROJECT_ID: the ID of the Shared VPC host project
- REGION: the region of your connector
- CONNECTOR_NAME: the name of your connector
Deploy the service:
```
gcloud app deploy
```

After deploying, your service is able to send requests to your Shared VPC network and receive the corresponding responses.

Next steps

Monitor admin activity with Serverless VPC Access audit logging.
Protect resources and data by creating a service perimeter with VPC Service Controls.
Learn about the Identity and Access Management (IAM) roles associated with Serverless VPC Access. See Serverless VPC Access roles in the IAM documentation for a list of permissions associated with each role.
Learn how to connect to Memorystore from the App Engine standard environment.