Verifica tu cuota para asegurarte de tener suficiente ancho de banda para admitir el tráfico esperado entre las áreas metropolitanas. Si necesitas más cuota, debes solicitar un aumento antes de continuar. Del mismo modo, verifica el límite de ancho de banda máximo por cable y solicita una excepción si es necesario.
Envía un pedido en el que especifiques los detalles de tus conexiones.
Google te enviará una confirmación del pedido por correo electrónico. Una vez que se asignen tus recursos, recibirás otro correo electrónico con tus LOA-CFA.
Envía las LOA-CFA a tu proveedor. Él aprovisiona las conexiones entre el perímetro de intercambio de tráfico de Google y tu red local. Google comenzará a probar automáticamente los niveles de luz de cada puerto asignado después de 24 horas.
Cuando tus conexiones estén listas para usar, deberás conectar tus redes entre sí. Para ello, crea una red entre sitios a través de tus conexiones y especifica las propiedades de los cables entre tus redes, incluido su ancho de banda.
Después de crear una red entre sitios con uno o más grupos de cables, para comenzar a enviar tráfico entre tus sitios, debes configurar tus routers locales para establecer la conectividad entre ellos.
[[["Fácil de comprender","easyToUnderstand","thumb-up"],["Resolvió mi problema","solvedMyProblem","thumb-up"],["Otro","otherUp","thumb-up"]],[["Difícil de entender","hardToUnderstand","thumb-down"],["Información o código de muestra incorrectos","incorrectInformationOrSampleCode","thumb-down"],["Faltan la información o los ejemplos que necesito","missingTheInformationSamplesINeed","thumb-down"],["Problema de traducción","translationIssue","thumb-down"],["Otro","otherDown","thumb-down"]],["Última actualización: 2025-09-08 (UTC)"],[],[],null,["# Cross-Site Interconnect provisioning overview\n\nThis page describes the steps to successfully create and configure\nCross-Site Interconnect.\n|\n| **Preview**\n|\n|\n| This product is subject to the \"Pre-GA Offerings Terms\" in the General Service Terms section\n| of the [Service Specific Terms](/terms/service-terms#1).\n|\n| Pre-GA products are available \"as is\" and might have limited support.\n|\n| For more information, see the\n| [launch stage descriptions](/products#product-launch-stages).\n| **Note:** For definitions of terms used on this page, see [Cloud Interconnect key\n| terms](/network-connectivity/docs/interconnect/concepts/terminology).\n\nTo create and configure a Cloud Interconnect connection and create\na cross-site network, follow these steps:\n\n1. [Check bandwidth quotas and limits](/network-connectivity/docs/interconnect/how-to/cross-site/check-bandwidth-quota)\n\n Check your quota to ensure that you have enough bandwidth to support your\n expected traffic between metros. If you need more quota, you must request an increase\n before proceeding. Similarly, check the limit for the maximum bandwidth\n per wire and request an exception if necessary.\n2. [Order Cross-Site Interconnect connections](/network-connectivity/docs/interconnect/how-to/cross-site/order-connections)\n\n Submit an order, specifying the details of your connections.\n Google then emails you an order confirmation. After your resources have been\n allocated, you receive another email with your LOA-CFAs.\n3. [Retrieve LOA-CFAs](/network-connectivity/docs/interconnect/how-to/cross-site/retrieve-loas)\n\n Send the LOA-CFAs to your vendor. They provision the connections between\n the Google peering edge and your on-premises network. Google\n automatically starts testing the light levels on each allocated port after\n 24 hours.\n4. [Test the connections](/network-connectivity/docs/interconnect/how-to/cross-site/test-connections)\n\n Follow the recommended steps to verify that your networks are connected\n to Google's network.\n5. [Create a cross-site network](/network-connectivity/docs/interconnect/how-to/cross-site/create-network)\n\n When your connections are ready to use, you need to connect\n your networks to each other. To do that,\n create a cross-site network over your connections, specifying the properties\n of the wire or wires between your networks, including their bandwidth.\n6. [Configure on-premises routers](/network-connectivity/docs/interconnect/how-to/cross-site/configure-onprem-routers)\n\n After you create a cross-site network with one or more wire groups, to start\n sending traffic between your sites, you need to configure your on-premises\n routers to establish connectivity with each other."]]
