Class HttpRequest.Builder (2.3.10)

Version 2.3.10

• 2.54.0 (latest)
• 2.53.0
• 2.52.0
• 2.51.0
• 2.49.0
• 2.48.0
• 2.47.0
• 2.46.0
• 2.45.0
• 2.44.0
• 2.43.0
• 2.42.0
• 2.41.0
• 2.40.0
• 2.39.0
• 2.37.0
• 2.36.0
• 2.35.0
• 2.34.0
• 2.33.0
• 2.32.0
• 2.31.0
• 2.30.0
• 2.29.0
• 2.28.0
• 2.27.0
• 2.24.0
• 2.23.0
• 2.22.0
• 2.21.0
• 2.20.0
• 2.19.0
• 2.18.0
• 2.17.0
• 2.16.0
• 2.15.0
• 2.14.0
• 2.13.0
• 2.12.0
• 2.11.0
• 2.9.0
• 2.8.0
• 2.7.0
• 2.6.0
• 2.5.0
• 2.4.0
• 2.3.12
• 2.2.0
• 2.1.11

public static final class HttpRequest.Builder extends GeneratedMessageV3.Builder<HttpRequest.Builder> implements HttpRequestOrBuilder

HTTP request. The task will be pushed to the worker as an HTTP request. If the worker or the redirected worker acknowledges the task by returning a successful HTTP response code ([200 - 299]), the task will be removed from the queue. If any other HTTP response code is returned or no response is received, the task will be retried according to the following:

• User-specified throttling: retry configuration, rate limits, and the queue's state.
• System throttling: To prevent the worker from overloading, Cloud Tasks may temporarily reduce the queue's effective rate. User-specified settings will not be changed. System throttling happens because:
  • Cloud Tasks backs off on all errors. Normally the backoff specified in rate limits will be used. But if the worker returns 429 (Too Many Requests), 503 (Service Unavailable), or the rate of errors is high, Cloud Tasks will use a higher backoff rate. The retry specified in the Retry-After HTTP response header is considered.
  • To prevent traffic spikes and to smooth sudden increases in traffic, dispatches ramp up slowly when the queue is newly created or idle and if large numbers of tasks suddenly become available to dispatch (due to spikes in create task rates, the queue being unpaused, or many tasks that are scheduled at the same time).

Protobuf type google.cloud.tasks.v2beta3.HttpRequest

Inheritance

Object > AbstractMessageLite.Builder<MessageType,BuilderType> > AbstractMessage.Builder<BuilderType> > GeneratedMessageV3.Builder > HttpRequest.Builder

Implements

HttpRequestOrBuilder

Inherited Members

AbstractMessage.Builder.findInitializationErrors()

AbstractMessage.Builder.getInitializationErrorString()

AbstractMessage.Builder.internalMergeFrom(AbstractMessageLite)

AbstractMessage.Builder.mergeFrom(byte[])

AbstractMessage.Builder.mergeFrom(byte[],ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(byte[],int,int)

AbstractMessage.Builder.mergeFrom(byte[],int,int,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(ByteString)

AbstractMessage.Builder.mergeFrom(ByteString,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(CodedInputStream)

AbstractMessage.Builder.mergeFrom(CodedInputStream,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(Message)

AbstractMessage.Builder.mergeFrom(InputStream)

AbstractMessage.Builder.mergeFrom(InputStream,ExtensionRegistryLite)

AbstractMessage.Builder.newUninitializedMessageException(Message)

AbstractMessage.Builder.toString()

AbstractMessageLite.Builder.<T>addAll(Iterable<T>,Collection<? super T>)

AbstractMessageLite.Builder.<T>addAll(Iterable<T>,List<? super T>)

AbstractMessageLite.Builder.internalMergeFrom(MessageType)

AbstractMessageLite.Builder.mergeDelimitedFrom(InputStream)

AbstractMessageLite.Builder.mergeDelimitedFrom(InputStream,ExtensionRegistryLite)

AbstractMessageLite.Builder.mergeFrom(MessageLite)

AbstractMessageLite.Builder.newUninitializedMessageException(MessageLite)

GeneratedMessageV3.Builder.addRepeatedField(Descriptors.FieldDescriptor,Object)

GeneratedMessageV3.Builder.clear()

GeneratedMessageV3.Builder.clearField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.clearOneof(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.clone()

GeneratedMessageV3.Builder.getAllFields()

GeneratedMessageV3.Builder.getDescriptorForType()

GeneratedMessageV3.Builder.getField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.getFieldBuilder(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.getOneofFieldDescriptor(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.getParentForChildren()

GeneratedMessageV3.Builder.getRepeatedField(Descriptors.FieldDescriptor,int)

GeneratedMessageV3.Builder.getRepeatedFieldBuilder(Descriptors.FieldDescriptor,int)

GeneratedMessageV3.Builder.getRepeatedFieldCount(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.getUnknownFields()

GeneratedMessageV3.Builder.hasField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.hasOneof(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.internalGetFieldAccessorTable()

GeneratedMessageV3.Builder.internalGetMapField(int)

GeneratedMessageV3.Builder.internalGetMutableMapField(int)

GeneratedMessageV3.Builder.isClean()

GeneratedMessageV3.Builder.isInitialized()

GeneratedMessageV3.Builder.markClean()

GeneratedMessageV3.Builder.mergeUnknownFields(UnknownFieldSet)

GeneratedMessageV3.Builder.newBuilderForField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.onBuilt()

GeneratedMessageV3.Builder.onChanged()

GeneratedMessageV3.Builder.setField(Descriptors.FieldDescriptor,Object)

GeneratedMessageV3.Builder.setRepeatedField(Descriptors.FieldDescriptor,int,Object)

GeneratedMessageV3.Builder.setUnknownFields(UnknownFieldSet)

GeneratedMessageV3.Builder.setUnknownFieldsProto3(UnknownFieldSet)

Object.equals(Object)

Object.finalize()

Object.getClass()

Object.hashCode()

Object.notify()

Object.notifyAll()

Object.wait()

Object.wait(long)

Object.wait(long,int)

Static Methods

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()

Returns

Type	Description
Descriptor

Methods

addRepeatedField(Descriptors.FieldDescriptor field, Object value)

public HttpRequest.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)

Parameters

Name	Description
field	FieldDescriptor
value	Object

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.addRepeatedField(Descriptors.FieldDescriptor field, Object value)

build()

public HttpRequest build()

Returns

Type	Description
HttpRequest

buildPartial()

public HttpRequest buildPartial()

Returns

Type	Description
HttpRequest

clear()

public HttpRequest.Builder clear()

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.clear()

clearAuthorizationHeader()

public HttpRequest.Builder clearAuthorizationHeader()

Returns

Type	Description
HttpRequest.Builder

clearBody()

public HttpRequest.Builder clearBody()

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

bytes body = 4;

Returns

Type	Description
HttpRequest.Builder	This builder for chaining.

clearField(Descriptors.FieldDescriptor field)

public HttpRequest.Builder clearField(Descriptors.FieldDescriptor field)

Parameter

Name	Description
field	FieldDescriptor

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.clearField(Descriptors.FieldDescriptor field)

clearHeaders()

public HttpRequest.Builder clearHeaders()

Returns

Type	Description
HttpRequest.Builder

clearHttpMethod()

public HttpRequest.Builder clearHttpMethod()

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Returns

Type	Description
HttpRequest.Builder	This builder for chaining.

clearOauthToken()

public HttpRequest.Builder clearOauthToken()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns

Type	Description
HttpRequest.Builder

clearOidcToken()

public HttpRequest.Builder clearOidcToken()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns

Type	Description
HttpRequest.Builder

clearOneof(Descriptors.OneofDescriptor oneof)

public HttpRequest.Builder clearOneof(Descriptors.OneofDescriptor oneof)

Parameter

Name	Description
oneof	OneofDescriptor

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.clearOneof(Descriptors.OneofDescriptor oneof)

clearUrl()

public HttpRequest.Builder clearUrl()

Required. The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Returns

Type	Description
HttpRequest.Builder	This builder for chaining.

clone()

public HttpRequest.Builder clone()

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.clone()

containsHeaders(String key)

public boolean containsHeaders(String key)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is:

• Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
• Content-Length: This will be computed by Cloud Tasks.
• User-Agent: This will be set to "Google-Cloud-Tasks".
• X-Google-*: Google use only.
• X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameter

Name	Description
key	String

Returns

Type	Description
boolean

getAuthorizationHeaderCase()

public HttpRequest.AuthorizationHeaderCase getAuthorizationHeaderCase()

Returns

Type	Description
HttpRequest.AuthorizationHeaderCase

getBody()

public ByteString getBody()

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

bytes body = 4;

Returns

Type	Description
ByteString	The body.

getDefaultInstanceForType()

public HttpRequest getDefaultInstanceForType()

Returns

Type	Description
HttpRequest

getDescriptorForType()

public Descriptors.Descriptor getDescriptorForType()

Returns

Type	Description
Descriptor

Overrides

GeneratedMessageV3.Builder<BuilderType>.getDescriptorForType()

getHeaders()

public Map<String,String> getHeaders()

Use #getHeadersMap() instead.

Returns

Type	Description
Map<String,String>

getHeadersCount()

public int getHeadersCount()

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is:

• Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
• Content-Length: This will be computed by Cloud Tasks.
• User-Agent: This will be set to "Google-Cloud-Tasks".
• X-Google-*: Google use only.
• X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Returns

Type	Description
int

getHeadersMap()

public Map<String,String> getHeadersMap()

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is:

• Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
• Content-Length: This will be computed by Cloud Tasks.
• User-Agent: This will be set to "Google-Cloud-Tasks".
• X-Google-*: Google use only.
• X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Returns

Type	Description
Map<String,String>

getHeadersOrDefault(String key, String defaultValue)

public String getHeadersOrDefault(String key, String defaultValue)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is:

• Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
• Content-Length: This will be computed by Cloud Tasks.
• User-Agent: This will be set to "Google-Cloud-Tasks".
• X-Google-*: Google use only.
• X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameters

Name	Description
key	String
defaultValue	String

Returns

Type	Description
String

getHeadersOrThrow(String key)

public String getHeadersOrThrow(String key)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is:

• Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
• Content-Length: This will be computed by Cloud Tasks.
• User-Agent: This will be set to "Google-Cloud-Tasks".
• X-Google-*: Google use only.
• X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameter

Name	Description
key	String

Returns

Type	Description
String

getHttpMethod()

public HttpMethod getHttpMethod()

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Returns

Type	Description
HttpMethod	The httpMethod.

getHttpMethodValue()

public int getHttpMethodValue()

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Returns

Type	Description
int	The enum numeric value on the wire for httpMethod.

getMutableHeaders()

public Map<String,String> getMutableHeaders()

Use alternate mutation accessors instead.

Returns

Type	Description
Map<String,String>

getOauthToken()

public OAuthToken getOauthToken()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns

Type	Description
OAuthToken	The oauthToken.

getOauthTokenBuilder()

public OAuthToken.Builder getOauthTokenBuilder()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns

Type	Description
OAuthToken.Builder

getOauthTokenOrBuilder()

public OAuthTokenOrBuilder getOauthTokenOrBuilder()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns

Type	Description
OAuthTokenOrBuilder

getOidcToken()

public OidcToken getOidcToken()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns

Type	Description
OidcToken	The oidcToken.

getOidcTokenBuilder()

public OidcToken.Builder getOidcTokenBuilder()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns

Type	Description
OidcToken.Builder

getOidcTokenOrBuilder()

public OidcTokenOrBuilder getOidcTokenOrBuilder()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns

Type	Description
OidcTokenOrBuilder

getUrl()

public String getUrl()

Required. The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Returns

Type	Description
String	The url.

getUrlBytes()

public ByteString getUrlBytes()

Required. The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Returns

Type	Description
ByteString	The bytes for url.

hasOauthToken()

public boolean hasOauthToken()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns

Type	Description
boolean	Whether the oauthToken field is set.

hasOidcToken()

public boolean hasOidcToken()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns

Type	Description
boolean	Whether the oidcToken field is set.

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()

Returns

Type	Description
FieldAccessorTable

Overrides

GeneratedMessageV3.Builder<BuilderType>.internalGetFieldAccessorTable()

internalGetMapField(int number)

protected MapField internalGetMapField(int number)

Parameter

Name	Description
number	int

Returns

Type	Description
MapField

Overrides

GeneratedMessageV3.Builder<BuilderType>.internalGetMapField(int fieldNumber)

internalGetMutableMapField(int number)

protected MapField internalGetMutableMapField(int number)

Parameter

Name	Description
number	int

Returns

Type	Description
MapField

Overrides

GeneratedMessageV3.Builder<BuilderType>.internalGetMutableMapField(int fieldNumber)

isInitialized()

public final boolean isInitialized()

Returns

Type	Description
boolean

Overrides

GeneratedMessageV3.Builder<BuilderType>.isInitialized()

mergeFrom(HttpRequest other)

public HttpRequest.Builder mergeFrom(HttpRequest other)

Parameter

Name	Description
other	HttpRequest

Returns

Type	Description
HttpRequest.Builder

mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public HttpRequest.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

Parameters

Name	Description
input	CodedInputStream
extensionRegistry	ExtensionRegistryLite

Returns

Type	Description
HttpRequest.Builder

Overrides

AbstractMessage.Builder<BuilderType>.mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

Exceptions

Type	Description
IOException

mergeFrom(Message other)

public HttpRequest.Builder mergeFrom(Message other)

Parameter

Name	Description
other	Message

Returns

Type	Description
HttpRequest.Builder

Overrides

AbstractMessage.Builder<BuilderType>.mergeFrom(Message other)

mergeOauthToken(OAuthToken value)

public HttpRequest.Builder mergeOauthToken(OAuthToken value)

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Parameter

Name	Description
value	OAuthToken

Returns

Type	Description
HttpRequest.Builder

mergeOidcToken(OidcToken value)

public HttpRequest.Builder mergeOidcToken(OidcToken value)

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Parameter

Name	Description
value	OidcToken

Returns

Type	Description
HttpRequest.Builder

mergeUnknownFields(UnknownFieldSet unknownFields)

public final HttpRequest.Builder mergeUnknownFields(UnknownFieldSet unknownFields)

Parameter

Name	Description
unknownFields	UnknownFieldSet

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.mergeUnknownFields(UnknownFieldSet unknownFields)

putAllHeaders(Map<String,String> values)

public HttpRequest.Builder putAllHeaders(Map<String,String> values)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is:

• Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
• Content-Length: This will be computed by Cloud Tasks.
• User-Agent: This will be set to "Google-Cloud-Tasks".
• X-Google-*: Google use only.
• X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameter

Name	Description
values	Map<String,String>

Returns

Type	Description
HttpRequest.Builder

putHeaders(String key, String value)

public HttpRequest.Builder putHeaders(String key, String value)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is:

• Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
• Content-Length: This will be computed by Cloud Tasks.
• User-Agent: This will be set to "Google-Cloud-Tasks".
• X-Google-*: Google use only.
• X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameters

Name	Description
key	String
value	String

Returns

Type	Description
HttpRequest.Builder

removeHeaders(String key)

public HttpRequest.Builder removeHeaders(String key)

HTTP request headers. This map contains the header field names and values. Headers can be set when the task is created. These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced. A partial list of headers that will be ignored or replaced is:

• Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
• Content-Length: This will be computed by Cloud Tasks.
• User-Agent: This will be set to "Google-Cloud-Tasks".
• X-Google-*: Google use only.
• X-AppEngine-*: Google use only. Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json". Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values. The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameter

Name	Description
key	String

Returns

Type	Description
HttpRequest.Builder

setBody(ByteString value)

public HttpRequest.Builder setBody(ByteString value)

HTTP request body. A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

bytes body = 4;

Parameter

Name	Description
value	ByteString The body to set.

Returns

Type	Description
HttpRequest.Builder	This builder for chaining.

setField(Descriptors.FieldDescriptor field, Object value)

public HttpRequest.Builder setField(Descriptors.FieldDescriptor field, Object value)

Parameters

Name	Description
field	FieldDescriptor
value	Object

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.setField(Descriptors.FieldDescriptor field, Object value)

setHttpMethod(HttpMethod value)

public HttpRequest.Builder setHttpMethod(HttpMethod value)

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Parameter

Name	Description
value	HttpMethod The httpMethod to set.

Returns

Type	Description
HttpRequest.Builder	This builder for chaining.

setHttpMethodValue(int value)

public HttpRequest.Builder setHttpMethodValue(int value)

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Parameter

Name	Description
value	int The enum numeric value on the wire for httpMethod to set.

Returns

Type	Description
HttpRequest.Builder	This builder for chaining.

setOauthToken(OAuthToken value)

public HttpRequest.Builder setOauthToken(OAuthToken value)

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Parameter

Name	Description
value	OAuthToken

Returns

Type	Description
HttpRequest.Builder

setOauthToken(OAuthToken.Builder builderForValue)

public HttpRequest.Builder setOauthToken(OAuthToken.Builder builderForValue)

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request. This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Parameter

Name	Description
builderForValue	OAuthToken.Builder

Returns

Type	Description
HttpRequest.Builder

setOidcToken(OidcToken value)

public HttpRequest.Builder setOidcToken(OidcToken value)

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Parameter

Name	Description
value	OidcToken

Returns

Type	Description
HttpRequest.Builder

setOidcToken(OidcToken.Builder builderForValue)

public HttpRequest.Builder setOidcToken(OidcToken.Builder builderForValue)

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request. This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Parameter

Name	Description
builderForValue	OidcToken.Builder

Returns

Type	Description
HttpRequest.Builder

setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

public HttpRequest.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

Parameters

Name	Description
field	FieldDescriptor
index	int
value	Object

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

setUnknownFields(UnknownFieldSet unknownFields)

public final HttpRequest.Builder setUnknownFields(UnknownFieldSet unknownFields)

Parameter

Name	Description
unknownFields	UnknownFieldSet

Returns

Type	Description
HttpRequest.Builder

Overrides

GeneratedMessageV3.Builder<BuilderType>.setUnknownFields(UnknownFieldSet unknownFields)

setUrl(String value)

public HttpRequest.Builder setUrl(String value)

Required. The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Parameter

Name	Description
value	String The url to set.

Returns

Type	Description
HttpRequest.Builder	This builder for chaining.

setUrlBytes(ByteString value)

public HttpRequest.Builder setUrlBytes(ByteString value)

Required. The full url path that the request will be sent to. This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding. The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Parameter

Name	Description
value	ByteString The bytes for url to set.

Returns

Type	Description
HttpRequest.Builder	This builder for chaining.