Class HttpRequest.Builder (2.41.0)

public static final class HttpRequest.Builder extends GeneratedMessageV3.Builder<HttpRequest.Builder> implements HttpRequestOrBuilder

HTTP request.

The task will be pushed to the worker as an HTTP request. If the worker or the redirected worker acknowledges the task by returning a successful HTTP response code ([200 - 299]), the task will be removed from the queue. If any other HTTP response code is returned or no response is received, the task will be retried according to the following:

User-specified throttling: retry configuration, rate limits, and the queue's state.
System throttling: To prevent the worker from overloading, Cloud Tasks may temporarily reduce the queue's effective rate. User-specified settings will not be changed.

System throttling happens because:
- Cloud Tasks backs off on all errors. Normally the backoff specified in rate limits will be used. But if the worker returns 429 (Too Many Requests), 503 (Service Unavailable), or the rate of errors is high, Cloud Tasks will use a higher backoff rate. The retry specified in the Retry-After HTTP response header is considered.
- To prevent traffic spikes and to smooth sudden increases in traffic, dispatches ramp up slowly when the queue is newly created or idle and if large numbers of tasks suddenly become available to dispatch (due to spikes in create task rates, the queue being unpaused, or many tasks that are scheduled at the same time).

Protobuf type google.cloud.tasks.v2beta3.HttpRequest

Inheritance

Object > AbstractMessageLite.Builder<MessageType,BuilderType> > AbstractMessage.Builder<BuilderType> > GeneratedMessageV3.Builder > HttpRequest.Builder

Implements

HttpRequestOrBuilder

Inherited Members

AbstractMessage.Builder.findInitializationErrors()

AbstractMessage.Builder.getInitializationErrorString()

AbstractMessage.Builder.internalMergeFrom(AbstractMessageLite)

AbstractMessage.Builder.mergeFrom(byte[])

AbstractMessage.Builder.mergeFrom(byte[],ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(byte[],int,int)

AbstractMessage.Builder.mergeFrom(byte[],int,int,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(ByteString)

AbstractMessage.Builder.mergeFrom(ByteString,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(CodedInputStream)

AbstractMessage.Builder.mergeFrom(CodedInputStream,ExtensionRegistryLite)

AbstractMessage.Builder.mergeFrom(Message)

AbstractMessage.Builder.mergeFrom(InputStream)

AbstractMessage.Builder.mergeFrom(InputStream,ExtensionRegistryLite)

AbstractMessage.Builder.newUninitializedMessageException(Message)

AbstractMessage.Builder.toString()

AbstractMessageLite.Builder.<T>addAll(Iterable<T>,Collection<? super T>)

AbstractMessageLite.Builder.<T>addAll(Iterable<T>,List<? super T>)

AbstractMessageLite.Builder.internalMergeFrom(MessageType)

AbstractMessageLite.Builder.mergeDelimitedFrom(InputStream)

AbstractMessageLite.Builder.mergeDelimitedFrom(InputStream,ExtensionRegistryLite)

AbstractMessageLite.Builder.mergeFrom(MessageLite)

AbstractMessageLite.Builder.newUninitializedMessageException(MessageLite)

GeneratedMessageV3.Builder.addRepeatedField(Descriptors.FieldDescriptor,Object)

GeneratedMessageV3.Builder.clear()

GeneratedMessageV3.Builder.clearField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.clearOneof(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.clone()

GeneratedMessageV3.Builder.getAllFields()

GeneratedMessageV3.Builder.getDescriptorForType()

GeneratedMessageV3.Builder.getField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.getFieldBuilder(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.getOneofFieldDescriptor(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.getParentForChildren()

GeneratedMessageV3.Builder.getRepeatedField(Descriptors.FieldDescriptor,int)

GeneratedMessageV3.Builder.getRepeatedFieldBuilder(Descriptors.FieldDescriptor,int)

GeneratedMessageV3.Builder.getRepeatedFieldCount(Descriptors.FieldDescriptor)

com.google.protobuf.GeneratedMessageV3.Builder.getUnknownFieldSetBuilder()

GeneratedMessageV3.Builder.getUnknownFields()

GeneratedMessageV3.Builder.hasField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.hasOneof(Descriptors.OneofDescriptor)

GeneratedMessageV3.Builder.internalGetFieldAccessorTable()

GeneratedMessageV3.Builder.internalGetMapField(int)

com.google.protobuf.GeneratedMessageV3.Builder.internalGetMapFieldReflection(int)

GeneratedMessageV3.Builder.internalGetMutableMapField(int)

com.google.protobuf.GeneratedMessageV3.Builder.internalGetMutableMapFieldReflection(int)

GeneratedMessageV3.Builder.isClean()

GeneratedMessageV3.Builder.isInitialized()

GeneratedMessageV3.Builder.markClean()

GeneratedMessageV3.Builder.mergeUnknownFields(UnknownFieldSet)

com.google.protobuf.GeneratedMessageV3.Builder.mergeUnknownLengthDelimitedField(int,com.google.protobuf.ByteString)

com.google.protobuf.GeneratedMessageV3.Builder.mergeUnknownVarintField(int,int)

GeneratedMessageV3.Builder.newBuilderForField(Descriptors.FieldDescriptor)

GeneratedMessageV3.Builder.onBuilt()

GeneratedMessageV3.Builder.onChanged()

com.google.protobuf.GeneratedMessageV3.Builder.parseUnknownField(com.google.protobuf.CodedInputStream,com.google.protobuf.ExtensionRegistryLite,int)

GeneratedMessageV3.Builder.setField(Descriptors.FieldDescriptor,Object)

GeneratedMessageV3.Builder.setRepeatedField(Descriptors.FieldDescriptor,int,Object)

com.google.protobuf.GeneratedMessageV3.Builder.setUnknownFieldSetBuilder(com.google.protobuf.UnknownFieldSet.Builder)

GeneratedMessageV3.Builder.setUnknownFields(UnknownFieldSet)

GeneratedMessageV3.Builder.setUnknownFieldsProto3(UnknownFieldSet)

Object.equals(Object)

Object.finalize()

Object.getClass()

Object.hashCode()

Object.notify()

Object.notifyAll()

Object.wait()

Object.wait(long)

Object.wait(long,int)

Static Methods

getDescriptor()

public static final Descriptors.Descriptor getDescriptor()

Returns
Type	Description
`Descriptor`

Methods

addRepeatedField(Descriptors.FieldDescriptor field, Object value)

public HttpRequest.Builder addRepeatedField(Descriptors.FieldDescriptor field, Object value)

Parameters
Name	Description
`field`	`FieldDescriptor`
`value`	`Object`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.addRepeatedField(Descriptors.FieldDescriptor field, Object value)

build()

public HttpRequest build()

Returns
Type	Description
`HttpRequest`

buildPartial()

public HttpRequest buildPartial()

Returns
Type	Description
`HttpRequest`

clear()

public HttpRequest.Builder clear()

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.clear()

clearAuthorizationHeader()

public HttpRequest.Builder clearAuthorizationHeader()

Returns
Type	Description
`HttpRequest.Builder`

clearBody()

public HttpRequest.Builder clearBody()

HTTP request body.

A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

bytes body = 4;

Returns
Type	Description
`HttpRequest.Builder`	This builder for chaining.

clearField(Descriptors.FieldDescriptor field)

public HttpRequest.Builder clearField(Descriptors.FieldDescriptor field)

Parameter
Name	Description
`field`	`FieldDescriptor`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.clearField(Descriptors.FieldDescriptor field)

clearHeaders()

public HttpRequest.Builder clearHeaders()

Returns
Type	Description
`HttpRequest.Builder`

clearHttpMethod()

public HttpRequest.Builder clearHttpMethod()

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Returns
Type	Description
`HttpRequest.Builder`	This builder for chaining.

clearOauthToken()

public HttpRequest.Builder clearOauthToken()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns
Type	Description
`HttpRequest.Builder`

clearOidcToken()

public HttpRequest.Builder clearOidcToken()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns
Type	Description
`HttpRequest.Builder`

clearOneof(Descriptors.OneofDescriptor oneof)

public HttpRequest.Builder clearOneof(Descriptors.OneofDescriptor oneof)

Parameter
Name	Description
`oneof`	`OneofDescriptor`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.clearOneof(Descriptors.OneofDescriptor oneof)

clearUrl()

public HttpRequest.Builder clearUrl()

Required. The full url path that the request will be sent to.

This string must begin with either "http://" or "https://". Some examples are: http://acme.com and https://acme.com/sales:8080. Cloud Tasks will encode some characters for safety and compatibility. The maximum allowed URL length is 2083 characters after encoding.

The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Returns
Type	Description
`HttpRequest.Builder`	This builder for chaining.

clone()

public HttpRequest.Builder clone()

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.clone()

containsHeaders(String key)

public boolean containsHeaders(String key)

HTTP request headers.

This map contains the header field names and values. Headers can be set when the task is created.

These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced.

A partial list of headers that will be ignored or replaced is:

Any header that is prefixed with "X-CloudTasks-" will be treated as service header. Service headers define properties of the task and are predefined in CloudTask.
Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
Content-Length: This will be computed by Cloud Tasks.
User-Agent: This will be set to "Google-Cloud-Tasks".
X-Google-*: Google use only.
X-AppEngine-*: Google use only.

Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json".

Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values.

The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameter
Name	Description
`key`	`String`

Returns
Type	Description
`boolean`

getAuthorizationHeaderCase()

public HttpRequest.AuthorizationHeaderCase getAuthorizationHeaderCase()

Returns
Type	Description
`HttpRequest.AuthorizationHeaderCase`

getBody()

public ByteString getBody()

HTTP request body.

A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

bytes body = 4;

Returns
Type	Description
`ByteString`	The body.

getDefaultInstanceForType()

public HttpRequest getDefaultInstanceForType()

Returns
Type	Description
`HttpRequest`

getDescriptorForType()

public Descriptors.Descriptor getDescriptorForType()

Returns
Type	Description
`Descriptor`

Overrides

GeneratedMessageV3.Builder<BuilderType>.getDescriptorForType()

getHeaders() (deprecated)

public Map<String,String> getHeaders()

Use #getHeadersMap() instead.

Returns
Type	Description
`Map<String,String>`

getHeadersCount()

public int getHeadersCount()

HTTP request headers.

This map contains the header field names and values. Headers can be set when the task is created.

These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced.

A partial list of headers that will be ignored or replaced is:

Any header that is prefixed with "X-CloudTasks-" will be treated as service header. Service headers define properties of the task and are predefined in CloudTask.
Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
Content-Length: This will be computed by Cloud Tasks.
User-Agent: This will be set to "Google-Cloud-Tasks".
X-Google-*: Google use only.
X-AppEngine-*: Google use only.

Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json".

Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values.

The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Returns
Type	Description
`int`

getHeadersMap()

public Map<String,String> getHeadersMap()

HTTP request headers.

This map contains the header field names and values. Headers can be set when the task is created.

These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced.

A partial list of headers that will be ignored or replaced is:

Any header that is prefixed with "X-CloudTasks-" will be treated as service header. Service headers define properties of the task and are predefined in CloudTask.
Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
Content-Length: This will be computed by Cloud Tasks.
User-Agent: This will be set to "Google-Cloud-Tasks".
X-Google-*: Google use only.
X-AppEngine-*: Google use only.

Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json".

Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values.

The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Returns
Type	Description
`Map<String,String>`

getHeadersOrDefault(String key, String defaultValue)

public String getHeadersOrDefault(String key, String defaultValue)

HTTP request headers.

This map contains the header field names and values. Headers can be set when the task is created.

These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced.

A partial list of headers that will be ignored or replaced is:

Any header that is prefixed with "X-CloudTasks-" will be treated as service header. Service headers define properties of the task and are predefined in CloudTask.
Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
Content-Length: This will be computed by Cloud Tasks.
User-Agent: This will be set to "Google-Cloud-Tasks".
X-Google-*: Google use only.
X-AppEngine-*: Google use only.

Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json".

Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values.

The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameters
Name	Description
`key`	`String`
`defaultValue`	`String`

Returns
Type	Description
`String`

getHeadersOrThrow(String key)

public String getHeadersOrThrow(String key)

HTTP request headers.

This map contains the header field names and values. Headers can be set when the task is created.

These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced.

A partial list of headers that will be ignored or replaced is:

Any header that is prefixed with "X-CloudTasks-" will be treated as service header. Service headers define properties of the task and are predefined in CloudTask.
Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
Content-Length: This will be computed by Cloud Tasks.
User-Agent: This will be set to "Google-Cloud-Tasks".
X-Google-*: Google use only.
X-AppEngine-*: Google use only.

Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json".

Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values.

The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameter
Name	Description
`key`	`String`

Returns
Type	Description
`String`

getHttpMethod()

public HttpMethod getHttpMethod()

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Returns
Type	Description
`HttpMethod`	The httpMethod.

getHttpMethodValue()

public int getHttpMethodValue()

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Returns
Type	Description
`int`	The enum numeric value on the wire for httpMethod.

getMutableHeaders() (deprecated)

public Map<String,String> getMutableHeaders()

Use alternate mutation accessors instead.

Returns
Type	Description
`Map<String,String>`

getOauthToken()

public OAuthToken getOauthToken()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns
Type	Description
`OAuthToken`	The oauthToken.

getOauthTokenBuilder()

public OAuthToken.Builder getOauthTokenBuilder()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns
Type	Description
`OAuthToken.Builder`

getOauthTokenOrBuilder()

public OAuthTokenOrBuilder getOauthTokenOrBuilder()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns
Type	Description
`OAuthTokenOrBuilder`

getOidcToken()

public OidcToken getOidcToken()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns
Type	Description
`OidcToken`	The oidcToken.

getOidcTokenBuilder()

public OidcToken.Builder getOidcTokenBuilder()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns
Type	Description
`OidcToken.Builder`

getOidcTokenOrBuilder()

public OidcTokenOrBuilder getOidcTokenOrBuilder()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns
Type	Description
`OidcTokenOrBuilder`

getUrl()

public String getUrl()

Required. The full url path that the request will be sent to.

The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Returns
Type	Description
`String`	The url.

getUrlBytes()

public ByteString getUrlBytes()

Required. The full url path that the request will be sent to.

The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Returns
Type	Description
`ByteString`	The bytes for url.

hasOauthToken()

public boolean hasOauthToken()

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Returns
Type	Description
`boolean`	Whether the oauthToken field is set.

hasOidcToken()

public boolean hasOidcToken()

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Returns
Type	Description
`boolean`	Whether the oidcToken field is set.

internalGetFieldAccessorTable()

protected GeneratedMessageV3.FieldAccessorTable internalGetFieldAccessorTable()

Returns
Type	Description
`FieldAccessorTable`

Overrides

GeneratedMessageV3.Builder<BuilderType>.internalGetFieldAccessorTable()

internalGetMapFieldReflection(int number)

protected MapFieldReflectionAccessor internalGetMapFieldReflection(int number)

Parameter
Name	Description
`number`	`int`

Returns
Type	Description
`com.google.protobuf.MapFieldReflectionAccessor`

Overrides

com.google.protobuf.GeneratedMessageV3.Builder.internalGetMapFieldReflection(int)

internalGetMutableMapFieldReflection(int number)

protected MapFieldReflectionAccessor internalGetMutableMapFieldReflection(int number)

Parameter
Name	Description
`number`	`int`

Returns
Type	Description
`com.google.protobuf.MapFieldReflectionAccessor`

Overrides

com.google.protobuf.GeneratedMessageV3.Builder.internalGetMutableMapFieldReflection(int)

isInitialized()

public final boolean isInitialized()

Returns
Type	Description
`boolean`

Overrides

GeneratedMessageV3.Builder<BuilderType>.isInitialized()

mergeFrom(HttpRequest other)

public HttpRequest.Builder mergeFrom(HttpRequest other)

Parameter
Name	Description
`other`	`HttpRequest`

Returns
Type	Description
`HttpRequest.Builder`

mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

public HttpRequest.Builder mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

Parameters
Name	Description
`input`	`CodedInputStream`
`extensionRegistry`	`ExtensionRegistryLite`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

AbstractMessage.Builder<BuilderType>.mergeFrom(CodedInputStream input, ExtensionRegistryLite extensionRegistry)

Exceptions
Type	Description
`IOException`

mergeFrom(Message other)

public HttpRequest.Builder mergeFrom(Message other)

Parameter
Name	Description
`other`	`Message`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

AbstractMessage.Builder<BuilderType>.mergeFrom(Message other)

mergeOauthToken(OAuthToken value)

public HttpRequest.Builder mergeOauthToken(OAuthToken value)

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Parameter
Name	Description
`value`	`OAuthToken`

Returns
Type	Description
`HttpRequest.Builder`

mergeOidcToken(OidcToken value)

public HttpRequest.Builder mergeOidcToken(OidcToken value)

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Parameter
Name	Description
`value`	`OidcToken`

Returns
Type	Description
`HttpRequest.Builder`

mergeUnknownFields(UnknownFieldSet unknownFields)

public final HttpRequest.Builder mergeUnknownFields(UnknownFieldSet unknownFields)

Parameter
Name	Description
`unknownFields`	`UnknownFieldSet`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.mergeUnknownFields(UnknownFieldSet unknownFields)

putAllHeaders(Map<String,String> values)

public HttpRequest.Builder putAllHeaders(Map<String,String> values)

HTTP request headers.

This map contains the header field names and values. Headers can be set when the task is created.

These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced.

A partial list of headers that will be ignored or replaced is:

Any header that is prefixed with "X-CloudTasks-" will be treated as service header. Service headers define properties of the task and are predefined in CloudTask.
Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
Content-Length: This will be computed by Cloud Tasks.
User-Agent: This will be set to "Google-Cloud-Tasks".
X-Google-*: Google use only.
X-AppEngine-*: Google use only.

Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json".

Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values.

The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameter
Name	Description
`values`	`Map<String,String>`

Returns
Type	Description
`HttpRequest.Builder`

putHeaders(String key, String value)

public HttpRequest.Builder putHeaders(String key, String value)

HTTP request headers.

This map contains the header field names and values. Headers can be set when the task is created.

These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced.

A partial list of headers that will be ignored or replaced is:

Any header that is prefixed with "X-CloudTasks-" will be treated as service header. Service headers define properties of the task and are predefined in CloudTask.
Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
Content-Length: This will be computed by Cloud Tasks.
User-Agent: This will be set to "Google-Cloud-Tasks".
X-Google-*: Google use only.
X-AppEngine-*: Google use only.

Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json".

Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values.

The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameters
Name	Description
`key`	`String`
`value`	`String`

Returns
Type	Description
`HttpRequest.Builder`

removeHeaders(String key)

public HttpRequest.Builder removeHeaders(String key)

HTTP request headers.

This map contains the header field names and values. Headers can be set when the task is created.

These headers represent a subset of the headers that will accompany the task's HTTP request. Some HTTP request headers will be ignored or replaced.

A partial list of headers that will be ignored or replaced is:

Any header that is prefixed with "X-CloudTasks-" will be treated as service header. Service headers define properties of the task and are predefined in CloudTask.
Host: This will be computed by Cloud Tasks and derived from HttpRequest.url.
Content-Length: This will be computed by Cloud Tasks.
User-Agent: This will be set to "Google-Cloud-Tasks".
X-Google-*: Google use only.
X-AppEngine-*: Google use only.

Content-Type won't be set by Cloud Tasks. You can explicitly set Content-Type to a media type when the task is created. For example, Content-Type can be set to "application/octet-stream" or "application/json".

Headers which can have multiple values (according to RFC2616) can be specified using comma-separated values.

The size of the headers must be less than 80KB.

map<string, string> headers = 3;

Parameter
Name	Description
`key`	`String`

Returns
Type	Description
`HttpRequest.Builder`

setBody(ByteString value)

public HttpRequest.Builder setBody(ByteString value)

HTTP request body.

A request body is allowed only if the HTTP method is POST, PUT, or PATCH. It is an error to set body on a task with an incompatible HttpMethod.

bytes body = 4;

Parameter
Name	Description
`value`	`ByteString` The body to set.

Returns
Type	Description
`HttpRequest.Builder`	This builder for chaining.

setField(Descriptors.FieldDescriptor field, Object value)

public HttpRequest.Builder setField(Descriptors.FieldDescriptor field, Object value)

Parameters
Name	Description
`field`	`FieldDescriptor`
`value`	`Object`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.setField(Descriptors.FieldDescriptor field, Object value)

setHttpMethod(HttpMethod value)

public HttpRequest.Builder setHttpMethod(HttpMethod value)

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Parameter
Name	Description
`value`	`HttpMethod` The httpMethod to set.

Returns
Type	Description
`HttpRequest.Builder`	This builder for chaining.

setHttpMethodValue(int value)

public HttpRequest.Builder setHttpMethodValue(int value)

The HTTP method to use for the request. The default is POST.

.google.cloud.tasks.v2beta3.HttpMethod http_method = 2;

Parameter
Name	Description
`value`	`int` The enum numeric value on the wire for httpMethod to set.

Returns
Type	Description
`HttpRequest.Builder`	This builder for chaining.

setOauthToken(OAuthToken value)

public HttpRequest.Builder setOauthToken(OAuthToken value)

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Parameter
Name	Description
`value`	`OAuthToken`

Returns
Type	Description
`HttpRequest.Builder`

setOauthToken(OAuthToken.Builder builderForValue)

public HttpRequest.Builder setOauthToken(OAuthToken.Builder builderForValue)

If specified, an OAuth token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization should generally only be used when calling Google APIs hosted on *.googleapis.com.

.google.cloud.tasks.v2beta3.OAuthToken oauth_token = 5;

Parameter
Name	Description
`builderForValue`	`OAuthToken.Builder`

Returns
Type	Description
`HttpRequest.Builder`

setOidcToken(OidcToken value)

public HttpRequest.Builder setOidcToken(OidcToken value)

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Parameter
Name	Description
`value`	`OidcToken`

Returns
Type	Description
`HttpRequest.Builder`

setOidcToken(OidcToken.Builder builderForValue)

public HttpRequest.Builder setOidcToken(OidcToken.Builder builderForValue)

If specified, an OIDC token will be generated and attached as an Authorization header in the HTTP request.

This type of authorization can be used for many scenarios, including calling Cloud Run, or endpoints where you intend to validate the token yourself.

.google.cloud.tasks.v2beta3.OidcToken oidc_token = 6;

Parameter
Name	Description
`builderForValue`	`OidcToken.Builder`

Returns
Type	Description
`HttpRequest.Builder`

setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

public HttpRequest.Builder setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

Parameters
Name	Description
`field`	`FieldDescriptor`
`index`	`int`
`value`	`Object`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.setRepeatedField(Descriptors.FieldDescriptor field, int index, Object value)

setUnknownFields(UnknownFieldSet unknownFields)

public final HttpRequest.Builder setUnknownFields(UnknownFieldSet unknownFields)

Parameter
Name	Description
`unknownFields`	`UnknownFieldSet`

Returns
Type	Description
`HttpRequest.Builder`

Overrides

GeneratedMessageV3.Builder<BuilderType>.setUnknownFields(UnknownFieldSet unknownFields)

setUrl(String value)

public HttpRequest.Builder setUrl(String value)

Required. The full url path that the request will be sent to.

The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Parameter
Name	Description
`value`	`String` The url to set.

Returns
Type	Description
`HttpRequest.Builder`	This builder for chaining.

setUrlBytes(ByteString value)

public HttpRequest.Builder setUrlBytes(ByteString value)

Required. The full url path that the request will be sent to.

The Location header response from a redirect response [300 - 399] may be followed. The redirect is not counted as a separate attempt.

string url = 1;

Parameter
Name	Description
`value`	`ByteString` The bytes for url to set.

Returns
Type	Description
`HttpRequest.Builder`	This builder for chaining.