MACsec for Cloud Interconnect는 Cloud Interconnect 연결의 트래픽을 보호하는 데 도움이 될 수 있습니다. MACsec for Cloud Interconnect를 사용하려면 Dedicated Interconnect 연결을 주문할 때 선택해야 합니다.
MACsec for Cloud Interconnect는 위치에 관계없이 100Gbps 링크에 사용할 수 있습니다. MACsec를 지원하는 10Gpbs 링크가 필요하면 원하는 위치에서 사용할 수 있는지 확인합니다.
실제 포트의 광출력이 예상 기준점 내에 있으면 포트가 작동하고 Google에서 연결 테스트에 사용되는 구성 세부정보가 포함된 자동화된 이메일을 보냅니다. Google에서 연결을 확인할 수 있도록 이러한 구성을 라우터에 적용합니다.
이 프로세스는 연결 프로덕션 구성의 IP 연결을 확인합니다.
이러한 구성을 적용하지 않거나 올바르지 않게 적용하면 Google에서는 문제 해결 정보가 포함된 자동화된 이메일을 보냅니다.
실제 포트의 광출력이 예상 기준점 내에 있지 않으면 Google에서 자동화된 이메일을 보내 오류를 알립니다.
모든 테스트를 통과하면 Dedicated Interconnect 연결을 사용할 수 있습니다.
VLAN 연결을 만든 후 네트워크 간 트래픽 전송을 시작하려면 Cloud Router로 BGP 세션을 설정하도록 온프레미스 라우터를 구성해야 합니다. 온프레미스 라우터를 구성하려면 VLAN ID, 인터페이스 IP 주소, VLAN 연결로 제공된 피어링 IP 주소를 사용합니다.
[[["이해하기 쉬움","easyToUnderstand","thumb-up"],["문제가 해결됨","solvedMyProblem","thumb-up"],["기타","otherUp","thumb-up"]],[["이해하기 어려움","hardToUnderstand","thumb-down"],["잘못된 정보 또는 샘플 코드","incorrectInformationOrSampleCode","thumb-down"],["필요한 정보/샘플이 없음","missingTheInformationSamplesINeed","thumb-down"],["번역 문제","translationIssue","thumb-down"],["기타","otherDown","thumb-down"]],["최종 업데이트: 2025-09-05(UTC)"],[],[],null,["# Dedicated Interconnect provisioning overview\n\nThis page describes the steps to successfully create and configure a\nDedicated Interconnect connection.\n| **Note:** For definitions of terms used on this page, see [Cloud Interconnect key\n| terms](/network-connectivity/docs/interconnect/concepts/terminology).\n\nTo create and configure a Cloud Interconnect connection for\nDedicated Interconnect, follow these steps:\n\n1. Decide if you want\n [MACsec for Cloud Interconnect](/network-connectivity/docs/interconnect/concepts/macsec-overview).\n\n MACsec for Cloud Interconnect can help you secure traffic on\n Cloud Interconnect connections. If you want\n MACsec for Cloud Interconnect, you must select it when you order a\n Dedicated Interconnect connection.\n\n MACsec for Cloud Interconnect is available for 100‑Gbps links,\n regardless of location. If you want a 10G‑Gpbs link with MACsec\n support, verify that it is [available in your desired\n locations](/network-connectivity/docs/interconnect/concepts/macsec-overview#macsec-availability).\n2. [Order a Dedicated Interconnect connection](/network-connectivity/docs/interconnect/how-to/dedicated/ordering-dedicated-interconnect)\n\n Submit an order, specifying the details of your connection.\n Google then emails you an order confirmation. After your resources have been\n allocated, you receive another email with your LOA-CFAs.\n3. [Retrieve LOA-CFAs](/network-connectivity/docs/interconnect/how-to/dedicated/retrieving-loas)\n\n Send the LOA-CFAs to your vendor. They provision the connections between\n the Google peering edge and your on-premises network. Google\n automatically starts testing the light levels on each allocated port after\n 24 hours.\n4. [Test the connection](/network-connectivity/docs/interconnect/how-to/dedicated/testing-connections)\n\n If the light level of your physical ports is within the expected threshold,\n the ports are operational and Google sends you an automated email\n containing configuration details for connectivity testing. Apply these\n configurations to your router so that Google can confirm connectivity.\n This process confirms the IP connectivity of your connection's production\n configuration.\n\n If you don't apply these configurations (or apply them incorrectly), Google\n sends an automated email with troubleshooting information.\n\n If the light level of your physical ports is *not* within the expected\n threshold, Google sends an automated email to notify you of the failure.\n\n After all tests have passed, your Dedicated Interconnect\n connection is ready to use.\n5. [Create VLAN attachments](/network-connectivity/docs/interconnect/how-to/dedicated/creating-vlan-attachments)\n\n When your connection is ready to use, you need to connect\n Virtual Private Cloud (VPC) networks to your on-premises network. To do that,\n first create a VLAN attachment, specifying an existing Cloud Router\n that's in the VPC network that you want to reach.\n\n If you want to deploy\n [HA VPN over Cloud Interconnect](/network-connectivity/docs/interconnect/concepts/ha-vpn-interconnect),\n you must\n [create encrypted VLAN attachments](/network-connectivity/docs/interconnect/how-to/dedicated/creating-vlan-attachments#encrypted-attachments).\n6. [Configure on-premises routers](/network-connectivity/docs/interconnect/how-to/dedicated/configuring-onprem-routers)\n\n After you create a VLAN attachment, to start sending traffic between\n networks, you need to configure your on-premises router to establish a BGP\n session with your Cloud Router. To configure your on-premises\n router, use the VLAN ID, interface IP address, and peering IP address\n provided by the VLAN attachment.\n7. Optional: [Configure HA VPN over Cloud Interconnect](/network-connectivity/docs/interconnect/how-to/configure-ha-vpn-interconnect)\n\n If you are deploying\n HA VPN over Cloud Interconnect,\n you must build the HA VPN tunnels that carry IPsec-encrypted\n traffic over your VLAN attachment."]]
