Single-zone deployment on Compute Engine

Last reviewed 2024-02-08 UTC

This document provides a reference architecture for a multi-tier application that runs on Compute Engine VMs in a single zone in Google Cloud. You can use this reference architecture to efficiently rehost (lift and shift) on-premises applications to the cloud with minimal changes to the applications. The document also describes the design factors that you should consider when you build a zonal architecture for your cloud applications. The intended audience for this document is cloud architects.

Architecture

The following diagram shows an architecture for an application that runs in a single Google Cloud zone. This architecture is aligned with the Google Cloud zonal deployment archetype.

Single-zone architecture using Compute Engine.

The architecture is based on the infrastructure as a service (IaaS) cloud model. You provision the required infrastructure resources (compute, networking, and storage) in Google Cloud. You retain full control over the infrastructure and responsibility for the operating system, middleware, and higher layers of the application stack. To learn more about IaaS and other cloud models, see PaaS vs. IaaS vs. SaaS vs. CaaS: How are they different?

The preceding diagram includes the following components:

Component Purpose
Regional external load balancer

The regional external load balancer receives and distributes user requests to the web tier VMs.

Use an appropriate load balancer type depending on the traffic type and other requirements. For example, if the backend consists of web servers (as shown in the preceding architecture), then use an Application Load Balancer to forward HTTP(S) traffic. To load-balance TCP traffic, use a Network Load Balancer. For more information, see Choose a load balancer.

Zonal managed instance group (MIG) for the web tier The web tier of the application is deployed on Compute Engine VMs that are part of a zonal MIG. The MIG is the backend for the regional external load balancer. Each VM in the MIG hosts an independent instance of the web tier of the application.
Regional internal load balancer

The regional internal load balancer distributes traffic from the web tier VMs to the application tier VMs.

Depending on your requirements, you can use a regional internal Application Load Balancer or Network Load Balancer. For more information, see Choose a load balancer.

Zonal MIG for the application tier The application tier is deployed on Compute Engine VMs that are part of a zonal MIG, which is the backend for the internal load balancer. Each VM in the MIG hosts an independent instance of the application tier.
Third-party database deployed on a Compute Engine VM

The architecture in this document shows a third-party database (like PostgreSQL) that's deployed on a Compute Engine VM. You can deploy a standby database in another zone. The database replication and failover capabilities depend on the database that you use.

Installing and managing a third-party database involves additional effort and operational cost for applying updates, monitoring, and ensuring availability. You can avoid the overhead of installing and managing a third-party database and take advantage of built-in high availability (HA) features by using a fully managed database service like Cloud SQL or AlloyDB for PostgreSQL. For more information about managed database options, see Database services.

Virtual Private Cloud network and subnet

All the Google Cloud resources in the architecture use a single VPC network and subnet.

Depending on your requirements, you can choose to build an architecture that uses multiple VPC networks or multiple subnets. For more information, see Deciding whether to create multiple VPC networks in "Best practices and reference architectures for VPC design."

Cloud Storage regional bucket

Application and database backups are stored in a regional Cloud Storage bucket. If a zone outage occurs, your application and data aren't lost.

Alternatively, you can use Backup and DR Service to create, store, and manage the database backups.

Products used

This reference architecture uses the following Google Cloud products:

  • Compute Engine: A secure and customizable compute service that lets you create and run VMs on Google's infrastructure.
  • Cloud Load Balancing: A portfolio of high performance, scalable, global and regional load balancers.
  • Cloud Storage: A low-cost, no-limit object store for diverse data types. Data can be accessed from within and outside Google Cloud, and it's replicated across locations for redundancy.
  • Virtual Private Cloud (VPC): A virtual system that provides global, scalable networking functionality for your Google Cloud workloads.

Use cases

This section describes use cases for which a single-zone deployment on Compute Engine is an appropriate choice.

  • Cloud development and testing: You can use a single-zone deployment architecture to build a low-cost cloud environment for development and testing.
  • Applications that don't need HA: A single-zone architecture might be sufficient for applications that can tolerate downtime due to infrastructure outages.
  • Low-latency, low-cost networking between application components: A single-zone architecture might be well suited for applications such as batch computing that need low-latency and high-bandwidth network connections among the compute nodes. With a single-zone deployment, there's no cross-zone network traffic, and you don't incur costs for intra-zone traffic.
  • Migration of commodity workloads: The zonal deployment architecture provides a simple cloud-migration path for commodity on-premises applications for which you have no control over the code or that can't support architectures beyond a basic active-passive topology.
  • Running license-restricted software: A single-zone architecture might be well suited for license-restricted systems where running more than one instance at a time is either too expensive or isn't permitted.

Design considerations

This section provides guidance to help you use this reference architecture to develop an architecture that meets your specific requirements for system design, security and compliance, reliability, operational efficiency, cost, and performance.

System design

This section provides guidance to help you to choose Google Cloud regions and zones for your zonal deployment and to select appropriate Google Cloud services.

Region selection

When you choose a Google Cloud region and zone for your applications, consider the following factors and requirements:

  • Availability of Google Cloud services. For more information, see Products available by location.
  • Availability of Compute Engine machine types. For more information, see Regions and zones.
  • End-user latency requirements.
  • Cost of Google Cloud resources.
  • Regulatory requirements.

Some of these factors and requirements might involve trade-offs. For example, the most cost-efficient region might not have the lowest carbon footprint.

Compute services

The reference architecture in this document uses Compute Engine VMs for all the tiers of the application. The design guidance in this document is specific to Compute Engine unless mentioned otherwise.

Depending on the requirements of your application, you can choose from the following other Google Cloud compute services. The design guidance for those services is outside the scope of this document.

  • You can run containerized applications in Google Kubernetes Engine (GKE) clusters. GKE is a container-orchestration engine that automates deploying, scaling, and managing containerized applications.
  • If you prefer to focus your IT efforts on your data and applications instead of setting up and operating infrastructure resources, then you can use serverless services like Cloud Run and Cloud Run functions.

The decision of whether to use VMs, containers, or serverless services involves a trade-off between configuration flexibility and management effort. VMs and containers provide more configuration flexibility, but you're responsible for managing the resources. In a serverless architecture, you deploy workloads to a preconfigured platform that requires minimal management effort. For more information about choosing appropriate compute services for your workloads in Google Cloud, see Hosting Applications on Google Cloud in the Google Cloud Architecture Framework.

Storage services

The architecture shown in this document uses zonal Persistent Disk volumes for all the tiers. For more durable persistent storage, you can use regional Persistent Disk volumes, which provide synchronous replication of data across two zones within a region.

For low-cost storage that's redundant across the zones within a region, you can use Cloud Storage regional buckets.

To store data that's shared across multiple VMs in a region, such as across all the VMs in the web tier or application tier, you can use Filestore. The data that you store in a Filestore Enterprise instance is replicated synchronously across three zones within the region. This replication ensures high availability and robustness against zone outages. You can store shared configuration files, common tools and utilities, and centralized logs in the Filestore instance, and mount the instance on multiple VMs.

If your database is Microsoft SQL Server, we recommend using Cloud SQL for SQL Server. In scenarios when Cloud SQL doesn't support your configuration requirements, or if you need access to the operating system, then you can deploy a failover cluster instance (FCI). In this scenario, you can use the fully managed Google Cloud NetApp Volumes to provide continuous availability (CA) SMB storage for the database.

When you design storage for your workloads, consider the functional characteristics, resilience requirements, performance expectations, and cost goals. For more information, see Design an optimal storage strategy for your cloud workload.

Database services

The reference architecture in this document uses a third-party database, like PostgreSQL, that's deployed on Compute Engine VMs. Installing and managing a third-party database involves effort and cost for operations like applying updates, monitoring and ensuring availability, performing backups, and recovering from failures.

You can avoid the effort and cost of installing and managing a third-party database by using a fully managed database service like Cloud SQL, AlloyDB for PostgreSQL, Bigtable, Spanner, or Firestore. These Google Cloud database services provide uptime service-level agreements (SLAs), and they include default capabilities for scalability and observability. If your workloads require an Oracle database, you can use Bare Metal Solution provided by Google Cloud. For an overview of the use cases that each Google Cloud database service is suitable for, see Google Cloud databases.

Security and compliance

This section describes factors that you should consider when you use this reference architecture to design and build a zonal topology in Google Cloud that meets the security and compliance requirements of your workloads.

Protection against external threats

To protect your application against external threats like distributed denial-of-service (DDoS) attacks and cross-site scripting (XSS), you can use Google Cloud Armor security policies. The security policies are enforced at the perimeter—that is, before traffic reaches the web tier. Each policy is a set of rules that specifies certain conditions that should be evaluated and actions to take when the conditions are met. For example, a rule could specify that if the incoming traffic's source IP address matches a specific IP address or CIDR range, then the traffic must be denied. In addition, you can apply preconfigured web application firewall (WAF) rules. For more information, see Security policy overview.

External access for VMs

In the reference architecture that this document describes, the VMs that host the application tier, web tier, and databases don't need inbound access from the internet. Don't assign external IP addresses to those VMs. Google Cloud resources that have only a private, internal IP address can still access certain Google APIs and services by using Private Service Connect or Private Google Access. For more information, see Private access options for services.

To enable secure outbound connections from Google Cloud resources that have only internal IP addresses, like the Compute Engine VMs in this reference architecture, you can use Cloud NAT.

VM image security

To ensure that your VMs use only approved images (that is, images with software that meets your policy or security requirements), you can define an organization policy that restricts the use of images in specific public image projects. For more information, see Setting up trusted image policies.

Service account privileges

In Google Cloud projects where the Compute Engine API is enabled, a default service account is created automatically. The default service account is granted the Editor IAM role (roles/editor) unless this behavior is disabled. By default, the default service account is attached to all VMs that you create by using the Google Cloud CLI or the Google Cloud console. The Editor role includes a broad range of permissions, so attaching the default service account to VMs creates a security risk. To avoid this risk, you can create and use dedicated service accounts for each application. To specify the resources that the service account can access, use fine-grained policies. For more information, see Limit service account privileges in "Best practices for using service accounts."

Network security

To control network traffic between the resources in the architecture, you must set up appropriate Cloud Next Generation Firewall rules. Each firewall rule lets you control traffic based on parameters like the protocol, IP address, and port. For example, you can configure a firewall rule to allow TCP traffic from the web server VMs to a specific port of the database VMs, and block all other traffic.

More security considerations

When you build the architecture for your workload, consider the platform-level security best practices and recommendations provided in the Enterprise foundations blueprint.

Reliability

This section describes design factors that you should consider when you use this reference architecture to build and operate reliable infrastructure for your zonal deployments in Google Cloud.

Infrastructure outages

In a single-zone deployment architecture, if any component in the infrastructure stack fails, the application can process requests if each tier contains at least one functioning component with adequate capacity. For example, if a web server instance fails, the load balancer forwards user requests to the other available web server instances. If a VM that hosts a web server or app server instance crashes, the MIG recreates the VM automatically. If the database crashes, you must manually activate the second database and update the app server instances to connect to the database.

A zone outage or region outage affects all the Compute Engine VMs in a single-zone deployment. A zone outage doesn't affect the load balancer in this architecture because it's a regional resource. However, the load balancer can't distribute traffic, because there are no available backends. If a zone or region outage occurs, you must wait for Google to resolve the outage, and then verify that the application works as expected.

You can reduce the downtime caused by zone or region outages by maintaining a passive (failover) replica of the infrastructure stack in another Google Cloud zone or region. If an outage occurs in the primary zone, you can activate the stack in the failover zone or region, and use DNS routing policies to route traffic to the load balancer in the failover zone or region.

For applications that require robustness against zone or region outages, consider using a regional or multi-regional architecture. See the following reference architectures:

MIG autoscaling

The autoscaling capability of stateless MIGs lets you maintain application availability and performance at predictable levels. Stateful MIGs can't be autoscaled.

To control the autoscaling behavior of your MIGs, you can specify target utilization metrics, such as average CPU utilization. You can also configure schedule-based autoscaling. For more information, see Autoscaling groups of instances.

MIG size limit

By default, a zonal MIG can have up to 1,000 VMs. You can increase the size limit of a MIG to 2,000 VMs.

VM autohealing

Sometimes the VMs that host your application might be running and available, but there might be issues with the application itself. It might freeze, crash, or not have sufficient memory. To verify whether an application is responding as expected, you can configure application-based health checks as part of the autohealing policy of your MIGs. If the application on a particular VM isn't responding, the MIG autoheals (repairs) the VM. For more information about configure autohealing, see Set up an application health check and autohealing.

VM placement

In the architecture that this document describes, the application tier and web tier run on Compute Engine VMs within a single zone. To improve the robustness of the architecture, you can create a spread placement policy and apply it to the MIG template. When the MIG creates VMs, it places the VMs on different physical servers (called hosts), so your VMs are robust against failures of individual hosts. For more information, see Apply spread placement policies to VMs.

VM capacity planning

To make sure that capacity for Compute Engine VMs is available when required for MIG autoscaling, you can create reservations. A reservation provides assured capacity in a specific zone for a specified number of VMs of a machine type that you choose. A reservation can be specific to a project, or shared across multiple projects. You incur charges for reserved resources even if the resources aren't provisioned or used. For more information about reservations, including billing considerations, see Reservations of Compute Engine zonal resources.

Persistent disk state

A best practice in application design is to avoid the need for stateful local disks. But if the requirement exists, you can configure your persistent disks to be stateful to ensure that the data is preserved when the VMs are repaired or recreated. However, we recommend that you keep the boot disks stateless, so that you can update them to the latest images with new versions and security patches. For more information, see Configuring stateful persistent disks in MIGs.

Data durability

You can use Backup and DR to create, store, and manage backups of the Compute Engine VMs. Backup and DR stores backup data in its original, application-readable format. When required, you can restore your workloads to production by directly using data from long-term backup storage without time-consuming data movement or preparation activities.

If you use a managed database service like Cloud SQL, backups are taken automatically based on the retention policy that you define. You can supplement the backup strategy with additional logical backups to meet regulatory, workflow, or business requirements.

If you use a third-party database and you need to store database backups and transaction logs, you can use regional Cloud Storage buckets. Regional Cloud Storage buckets provide low-cost backup storage that's redundant across zones.

Compute Engine provides the following options to help you to ensure the durability of data that's stored in Persistent Disk volumes:

  • You can use snapshots to capture the point-in-time state of Persistent Disk volumes. Standard snapshots are stored redundantly in multiple regions, with automatic checksums to ensure the integrity of your data. Snapshots are incremental by default, so they use less storage space and you save money. Snapshots are stored in a Cloud Storage location that you can configure. For more recommendations about using and managing snapshots, see Best practices for Compute Engine disk snapshots.
  • Regional Persistent Disk volumes let you run highly available applications that aren't affected by failures in persistent disks. When you create a regional Persistent Disk volume, Compute Engine maintains a replica of the disk in a different zone in the same region. Data is replicated synchronously to the disks in both zones. If any one of the two zones has an outage, the data remains available.

Database availability

If you use a managed database service like Cloud SQL in HA configuration, then in the event of a failure of the primary database, Cloud SQL fails over automatically to the standby database. You don't need to change the IP address for the database endpoint. If you use a self-managed third-party database that's deployed on a Compute Engine VM, then you must use an internal load balancer or other mechanism to ensure that the application can connect to another database if the primary database is unavailable.

To implement cross-zone failover for a database deployed on a Compute Engine VM, you need a mechanism to identify failures of the primary database and a process to fail over to the standby database. The specifics of the failover mechanism depend on the database that you use. You can set up an observer instance to detect failures of the primary database and orchestrate the failover. You must configure the failover rules appropriately to avoid a split-brain situation and prevent unnecessary failover. For example architectures that you can use to implement failover for PostgreSQL databases, see Architectures for high availability of PostgreSQL clusters on Compute Engine.

More reliability considerations

When you build the cloud architecture for your workload, review the reliability-related best practices and recommendations that are provided in the following documentation:

Cost optimization

This section provides guidance to optimize the cost of setting up and operating a zonal Google Cloud topology that you build by using this reference architecture.

VM machine types

To help you optimize the resource utilization of your VM instances, Compute Engine provides machine type recommendations. Use the recommendations to choose machine types that match your workload's compute requirements. For workloads with predictable resource requirements, you can customize the machine type to your needs and save money by using custom machine types.

VM provisioning model

If your application is fault tolerant, then Spot VMs can help to reduce your Compute Engine costs for the VMs in the application and web tiers. The cost of Spot VMs is significantly lower than regular VMs. However, Compute Engine might preemptively stop or delete Spot VMs to reclaim capacity. Spot VMs are suitable for batch jobs that can tolerate preemption and don't have HA requirements. Spot VMs offer the same machine types, options, and performance as regular VMs. However, when the resource capacity in a zone is limited, MIGs might not be able to scale out (that is, create VMs) automatically to the specified target size until the required capacity becomes available again.

Resource utilization

The autoscaling capability of stateless MIGs enables your application to handle increases in traffic gracefully, and it helps you to reduce cost when the need for resources is low. Stateful MIGs can't be autoscaled.

Third-party licensing

When you migrate third-party workloads to Google Cloud, you might be able to reduce cost by bringing your own licenses (BYOL). For example, to deploy Microsoft Windows Server VMs, instead of using a premium image that incurs additional cost for the third-party license, you can create and use a custom Windows BYOL image. You then pay only for the VM infrastructure that you use on Google Cloud. This strategy helps you continue to realize value from your existing investments in third-party licenses. If you decide to use the BYOL approach, we recommend that you do the following:

  • Provision the required number of compute CPU cores independently of memory by using custom machine types. By doing this, you limit the third-party licensing cost to the number of CPU cores that you need.
  • Reduce the number of vCPUs per core from 2 to 1 by disabling simultaneous multithreading (SMT), and reduce your licensing costs by 50%.

If you deploy a third-party database like Microsoft SQL Server on Compute Engine VMs, then you must consider the license costs for the third-party software. When you use a managed database service like Cloud SQL, the database license costs are included in the charges for the service.

More cost considerations

When you build the architecture for your workload, also consider the general best practices and recommendations that are provided in Google Cloud Architecture Framework: Cost optimization.

Operational efficiency

This section describes the factors that you should consider when you use this reference architecture to design and build a zonal Google Cloud topology that you can operate efficiently.

VM configuration updates

To update the configuration of the VMs in a MIG (such as the machine type or boot-disk image), you create a new instance template with the required configuration and then apply the new template to the MIG. The MIG updates the VMs by using the update method that you choose: automatic or selective. Choose an appropriate method based on your requirements for availability and operational efficiency. For more information about these MIG update methods, see Apply new VM configurations in a MIG.

VM images

For your MIG instance templates, instead of using Google-provided public images, we recommend that you create and use custom images that contain the configurations and software that your applications require. You can group your custom images into a custom image family. An image family always points to the most recent image in that family, so your instance templates and scripts can use that image without you having to update references to a specific image version.

Deterministic instance templates

If the instance templates that you use for your MIGs include startup scripts to install third-party software, make sure that the scripts explicitly specify software-installation parameters such as the software version. Otherwise, when the MIG creates the VMs, the software that's installed on the VMs might not be consistent. For example, if your instance template includes a startup script to install Apache HTTP Server 2.0 (the apache2 package), then make sure that the script specifies the exact apache2 version that should be installed, such as version 2.4.53. For more information, see Deterministic instance templates.

More operational considerations

When you build the architecture for your workload, consider the general best practices and recommendations for operational efficiency that are described in Google Cloud Architecture Framework: Operational excellence.

Performance optimization

This section describes the factors that you should consider when you use this reference architecture to design and build a zonal topology in Google Cloud that meets the performance requirements of your workloads.

VM placement

For workloads that require low inter-VM network latency, you can create a compact placement policy and apply it to the MIG template. When the MIG creates VMs, it places the VMs on physical servers that are close to each other. For more information, see Reduce latency by using compact placement policies.

VM machine types

Compute Engine offers a wide range of predefined and customizable machine types that you can choose from depending on your cost and performance requirements. The machine types are grouped into machine series and families. The following table provides a summary of the recommended machine families and series for different workload types:

Requirement Recommended machine family Example machine series
Best price-performance ratio for a variety of workloads General-purpose machine family C3, C3D, E2, N2, N2D, Tau T2D, Tau T2A
Highest performance per core and optimized for compute-intensive workloads Compute-optimized machine family C2, C2D, H3
High memory-to-vCPU ratio for memory-intensive workloads Memory-optimized machine family M3, M2, M1
GPUs for massively parallelized workloads Accelerator-optimized machine family A2, G2

For more information, see Machine families resource and comparison guide.

VM multithreading

Each virtual CPU (vCPU) that you allocate to a Compute Engine VM is implemented as a single hardware multithread. By default, two vCPUs share a physical CPU core. For workloads that are highly parallel or that perform floating point calculations (such as genetic sequence analysis and financial risk modeling), you can improve performance by reducing the number of threads that run on each physical CPU core. For more information, see Set the number of threads per core.

VM multithreading might have licensing implications for some third-party software, like databases. For more information, read the licensing documentation for the third-party software.

Network Service Tiers

Network Service Tiers lets you optimize the network cost and performance of your workloads. You can choose Premium Tier or Standard Tier.

  • Premium Tier uses Google's highly reliable global backbone to help you achieve minimal packet loss and latency. Traffic enters and leaves the Google network at a global edge point of presence (PoP) that's close to your end user. We recommend using Premium Tier as the default tier for optimal performance.
  • With Standard Tier, traffic enters and leaves the Google network at an edge PoP that's closest to the Google Cloud location where your workload runs. The pricing for Standard Tier is lower than Premium Tier. Standard Tier is suitable for traffic that isn't sensitive to packet loss and that doesn't have low latency requirements.

More performance considerations

When you build the architecture for your workload, consider the general best practices and recommendations that are provided in Google Cloud Architecture Framework: Performance optimization.

What's next

Contributors

Author: Kumar Dhanagopal | Cross-Product Solution Developer

Other contributors: